Nízkozdvižný prívesMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Nízkozdvižný príves
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
pevná cena bez DPH
29 900 €
(35 581 € brutto)
Rok výroby
2025
Stav
Nový
Umiestnenie
Egestorf 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
29 900 €
(35 581 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko
Volať
Technické detaily
- Celková hmotnosť:
- 14 400 kg
- Maximálna hmotnosť nákladu:
- 10 750 kg
- Konfigurácia náprav:
- 2 nápravy
- Dĺžka ložného priestoru:
- 7 000 mm
- Šírka ložného priestoru:
- 2 470 mm
- Výška ložného priestoru:
- 400 mm
Podrobnosti ponuky
- ID záznamu:
- A186-10-241
- Referenčné č.:
- 6180
- Naposledy aktualizované:
- dňa 12.07.2025
Popis
* ETÜ-TA-R 14,4:
* RDÜ Tire Pressure Monitoring System
* EBS Brake System
* Emergency Release Device for Spring-Loaded Cylinder
* Drum Brakes
* 2 x 7 t Gigant Axles
* Parabolic Springs with Compensating Unit
* Drawbar adjustable in height by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm
* 15-pin power connector
* LED lighting
* Front support winch
* Rear fold-out stabilisers
* Plastic toolbox approx. 858 x 500 x 500 mm mounted outside front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparations in front of the headboard and rear slope for retrofitting container locks for the transport of 20" containers
* Bolted smooth steel plate headboard
* Trapezoidal-profile steel side walls, folding, split 1x in the middle
* Steel rear wall, slidable, stowable inside in front of the headboard when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm, plus one 6.3 t lashing ring in each corner, various holes for 1.2 t lashing options in the headboard and rear cross member
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
Ibedpfx Aasv D Tcbebsc
* Chassis rear ramp angle approx. 860 mm
* Drawbar, headboard, tailgate, fold-out supports, and loading ramps hot-dip galvanised
* Axles, springs, air tanks, flange towing eye, and support winch painted in black tone
* Reinforced and certified body to EN 12642 XL incl. load securing certificate
* Wheelbase 1,140 mm
* Side walls painted in RAL 9010 pure white
* Painting of side walls in a RAL colour of your choice available at extra cost
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors excepted
* Available from calendar week 47/2025
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
* RDÜ Tire Pressure Monitoring System
* EBS Brake System
* Emergency Release Device for Spring-Loaded Cylinder
* Drum Brakes
* 2 x 7 t Gigant Axles
* Parabolic Springs with Compensating Unit
* Drawbar adjustable in height by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm
* 15-pin power connector
* LED lighting
* Front support winch
* Rear fold-out stabilisers
* Plastic toolbox approx. 858 x 500 x 500 mm mounted outside front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparations in front of the headboard and rear slope for retrofitting container locks for the transport of 20" containers
* Bolted smooth steel plate headboard
* Trapezoidal-profile steel side walls, folding, split 1x in the middle
* Steel rear wall, slidable, stowable inside in front of the headboard when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm, plus one 6.3 t lashing ring in each corner, various holes for 1.2 t lashing options in the headboard and rear cross member
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
Ibedpfx Aasv D Tcbebsc
* Chassis rear ramp angle approx. 860 mm
* Drawbar, headboard, tailgate, fold-out supports, and loading ramps hot-dip galvanised
* Axles, springs, air tanks, flange towing eye, and support winch painted in black tone
* Reinforced and certified body to EN 12642 XL incl. load securing certificate
* Wheelbase 1,140 mm
* Side walls painted in RAL 9010 pure white
* Painting of side walls in a RAL colour of your choice available at extra cost
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors excepted
* Available from calendar week 47/2025
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2001
Odoslať žiadosť
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe