Meusburger 3-Achs-Tele-Semi-1P. Radmul.-Hydr.rampen kúpiť použité (47 256)

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: Lrodpfx Ahji Ai E Rsasl - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) Lrjdeyxc Eyjpfx Ahajl - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light Lodpfxoykpbko Ahajrl - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards Lrsdpfx Ahsuadk Noajl - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: Ljdpfx Aema Hf Rjhasrl • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the bulkhead • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. Ljdperigw Rjfx Ahajrl 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Lrodpjl Uxdksfx Ahajl Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: Lsdpfx Ahsh Etf Rjajrl - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) Lrjdpfx Ajl Sl Izjhael 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer Ljdpfx Aol Ux Rwohaerl - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: použitý, pohotovostná hmotnosť: 14 100 kg, maximálna hmotnosť nákladu: 33 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1999, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17,5, stav pneumatík: 50 percento, farba: zelený, Rok výroby: 1999, veľkosť prednej pneumatiky: 235/75 17,5, veľkosť zadnej pneumatiky: 235/75 17,5, kabína vodiča: denná kabína, emisná trieda: žiadny, Výbava: ABS, registrácia nákladného vozidla, Referenčné číslo pre dopyty: 68575 Nooteboom, Európska norma * Rok výroby: 1999 * ABS, antiblokovací systém bŕzd * Pneumatické odpruženie * Odpruženie: vzduch * Celková hmotnosť: 48 000 kg * Pohotovostná hmotnosť: 14 100 kg * Nosnosť: 33 900 kg * Povolená celková hmotnosť: 48 000 kg * Výrobca náprav: SAF * Stav pneumatík 1. nápravy: 50 % -- 50 % - Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 2. nápravy: 40 % -- 40 % - Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 3. nápravy: 50 % -- 50 % - Rozmer pneumatík: 235/75 R17,5 * Rozmery pneumatík: 235/75 R17,5 * Výrobca ES-GE * 3. náprava hydraulicky nútene riadená * Teleskopická výsuvnosť do 9 950 mm * Teleskopický výsuv chybný * Nakladacia plocha 10 990 mm Vyhlásenie o zodpovednosti: Zmeny, predbežný predaj a chyby vyhradené. Lsdpfxoyibz Rs Ahasrl Viac fotografií a videí nájdete na našej domovskej stránke. Náš rozsiahly servis zahŕňa napríklad: * Nákup/predaj/prenájom úžitkových vozidiel * Rýchle a jednoduché financovanie * Zabezpečenie všetkých (exportných) dokladov * Objednanie exportných/colných značiek * Príprava vozidla: nové plachty, polepy, lakovanie a pod. * Profesionálne naloženie/nakladacia bezpečnosť * TüV-kontrola, servis registrácie vozidiel * Preprava úžitkových vozidiel Neváhajte kontaktovať náš vyškolený personál, radi Vám poradíme.

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. Lrjdpfeikyh Hox Ahajl HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem Lredpfx Ajiuy Nlshael - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick Lrjdpfx Aji Dwlwshajl - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně Ljdpfeiu Etrjx Ahasrl • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: Lrjdpet Ag Uwofx Ahaol - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide Ledpjk Af Svofx Ahaorl - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Lodpjmfqi Isfx Ahajrl Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations Lrodpfx Ahsunrapeaol - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 Lodpfx Aetvfkfohaerl - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: použitý, celková hmotnosť: 70 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1998, Výbava: ABS, Identifikačné číslo vozidla: XL952N5SAWL007036 Sedadlové zaťaženie: 20 000 kg - Zaťaženie náprav: 5 x 10 000 kg Vlastná hmotnosť: 13 100 kg Pravidelná technická kontrola v Rumunsku splatná Labutí krk: 4 100 mm Výška sedla: 1 250 mm Ljdeyx N Dvopfx Ahaorl Nízka ložná plocha: Dĺžka: 9 200 mm (z toho 650 mm skosených) — Šírka: 2 525 mm — Nakladacia výška: 880 mm TELESKOPICKY ROZŠÍRITEĽNÝ o 6 200 mm ROZŠÍRITEĽNÝ na 3 000 mm Závesné koľajnice Technické zaťaženie náprav 5 x 10 000 kg SAF nápravy s bubnovými brzdami Náprava 1, 2 = zdvíhacia Náprava 5, 6 = s následným riadením Pneumatiky: 235/75 R 17,5 Zmeny, medzičasný predaj a chyby sú výslovne vyhradené. Táto popis slúži na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Rozhodujúci je popis podľa kúpnej zmluvy. Naša ponuka je všeobecne bez novej STK. V prípade záujmu o novú STK Vám radi vypracujeme ponuku našich partnerských dielní! Vozidlo môže byť polepené reklamou a/alebo popísané. Platné sú naše všeobecné dodacie a platobné podmienky.

Stav: použitý, maximálna hmotnosť nákladu: 36 540 kg, celková hmotnosť: 48 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2020, ďalšia kontrola (TÜV): 05/2028, Rok výroby: 2020, Výbava: ABS, Internal Vehicle No.: G400133 En route to our yard in Kaufungen - Kassel, Germany, immediately available More INFO via Luis Lucena Low Loader LANGENDORF SATÜ 30 – 10.0 M with wheel recesses Year of manufacture: 2020 Radio remote control 3 axles – 2 steered – 1 lift axle Length: 13,900 mm Loading platform: 10,000 mm Perm. technical gross weight: 48,500 kg Unladen weight: 11,960 kg Lrjdpfx Ahsy A Uxasajl Financing Example: * Internal No.: G400133 * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,025.02 * Final installment: €11,380.00 If you are interested in this offer or wish to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We would be happy to accept your used vehicle as trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Stav: použitý, maximálna hmotnosť nákladu: 39 470 kg, celková hmotnosť: 48 400 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2012, ďalšia kontrola (TÜV): 11/2026, celková šírka: 2 550 mm, Rok výroby: 2012, Výbava: ABS, 4-axle Meusburger MTS-4 Lowloader Semi-trailer VIN: WO9TS401C0M49438 Chassis / Attachments: * Air suspension with lifting and lowering function * First axle liftable * Axles 3 + 4 with trailing steering / friction-steered * EBS/ABS braking system * 4 x BPW ECO axles with drum brakes * Tyres: 205/65 R17.5 * Remaining tyre tread: * Axle 1: approx. 60% / 60% * Axle 2: approx. 30% / 60% * Axle 3: approx. 30% / 60% * Axle 4: approx. 30% / 60% Lrodpjy Trmvsfx Ahael * 6 x PVC storage boxes * 2 x spare wheels * Drop-down supports at rear * Extension marker boards * 6 pairs of heavy-duty lashing rings * 9 pairs of lashing rings Body: * Lowloader semi-trailer * Upper deck length: approx. 3,650 mm * Lower deck length: approx. 9,870 mm * Total loading area length: approx. 13,520 mm * Internal width: approx. 2,550 mm * Loading height: approx. 870 mm * 8 pairs of long side stakes * 1 pair of short stakes * 6 pairs of external stake pockets * 1 pair of stake pockets on upper deck * 1 pair of centrally positioned stake pockets on upper deck Weights: * Permissible total weight: 48,400 kg * Unladen weight: approx. 8,930 kg * Payload: approx. 39,470 kg Other: * German registration * Roadworthy inspection valid until 11/2026 * Safety inspection valid until 05/2027 * Immediately operational New main inspections / safety inspections or payload downgrading/upgrading available upon request. We are happy to assist in obtaining export/temporary registration plates, as well as organizing vehicle transfer within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for typographical or printing errors. Subject to change, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in sales of new and used commercial vehicles. On 11,000 square meters, we offer a wide range of vehicles. Our company philosophy is based on fairness and professionalism. Customer satisfaction is our top priority, so we offer an excellent all-round service package and provide a competent contact person to assist you with the purchase or sale of your vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/exemption registration plates We are happy to assist you in procuring export or short-term plates. Completion of customs formalities We are happy to assist you in the completion of customs procedures.

Stav: použitý, maximálna hmotnosť nákladu: 36 250 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2015, dĺžka ložného priestoru: 12 350 mm, šírka ložného priestoru: 2 490 mm, výška ložného priestoru: 800 mm, celková šírka: 2 550 mm, celková výška: 3 030 mm, Výbava: ABS, Meusburger plošinový náves s 3 nápravami Typ: MPS-3 Brzda: kotúčová Užitočné zaťaženie: 36 250 kg Náprava: BPW 1x zdvíhacia náprava 2x oporné body Plošina: Dĺžka: 12,35 m Šírka: 2,49 m Výška: 0,80 m Radi vám pomôžeme aj v oblasti financovania/leasingu s našimi partnermi. Lrsdpjy Iibtofx Ahasl Všetky údaje sú bez záruky. Zmena údajov a medzičasný predaj vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 17 120 kg, celková hmotnosť: 24 200 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2007, Výbava: ABS, Vehicle identification number: W09PT300770M49888 Unladen weight: 7,080 kg German MOT (HU) due BPW Eco axles with drum brakes Axle 1: LIFTABLE Axle 3: SELF-STEERING (friction steered) Air suspension Platform dimensions: 7,900 x 2,540 mm – loading height: 800 mm Total length according to registration: 9,195 – 11,195 mm 2 pairs of wheel wells incl. extendable cover and loose wooden platform 2 pairs of wheel wells each with cover between the 1st and 2nd axle and 2nd and 3rd axle Ledpfxsyvmw Ie Ahaerl Towing drawbar hydraulically extendable – eyelet 50 mm Hydraulic rear extension Tyres: 205/65 R 17.5 Spare wheel holder WITH spare wheel We expressly reserve the right to make changes, interim sale, and errors. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of purchase law. The description according to the purchase contract is decisive. Our offer is generally without new TÜV approval. If new TÜV approval is required, we will be happy to make you an offer via our partner workshops! The vehicle may be stickered and/or labelled for advertising purposes. Our general delivery and payment conditions apply.