Müller-Mitteltal 3-Achs Plateau, Luftgefedert, Hydr. Rampen kúpiť použité (44 970)

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profil: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátorové valce * Bubnové brzdy ----Nápravy: * 3 x 11 tonové nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s funkciou zdvíhania a spúšťania, ako aj ventilom RtR ----Ťažné oko: * Ťažné oko dĺžky 1 200 mm s ťahovým čapom 40 mm a nastaviteľnou výškou pomocou ťažnej pružiny a upínacieho zámku ----Elektrická inštalácia / Osvetlenie: * Smart-panel ako informačný nástroj, namontovaný na prívese (na zobrazenie zaťaženia nápravy – samostatne vpredu a vzadu) * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v kabíne nákladného vozidla prostredníctvom signálu EBS bez inštalácie na strane nákladného vozidla * 15-pólová zásuvka * LED osvetlenie 12 / 24 V * LED výstražné svetlo (odnímateľné) vzadu ----Všeobecné montážne diely: * Bočná ochrana proti nárazu * Otočné podpery vzadu na ráme vozidla * Mechanicky nastaviteľné výstražné tabule vpredu a vzadu * Predný plastový blatník s ochranou proti striekajúcej vode * Zadný rovný oceľový ochranný panel s ochranou proti striekajúcej vode * Náradie v oceľovej skrinke s povrchovou úpravou žiarovým zinkovaním, rozmery cca 650 x 300 x 600 mm, čierna prášková povrchová úprava, umiestnená na pravej strane * Kontajner v otočnom ráme na príslušenstvo s výklopným vekom, 2 ks. západiek, pevne zabudované (priamo za platformou otočného rámu) * 2 ks. schodíkov, žiarovo zinkovaných, umiestnených na otočnom ráme vľavo a vpravo ----Ložná plocha: * ROBOTER – zváraná, protišmyková povrchová úprava na oceľovej platni platformy otočného rámu (prečnievajúce zvarové švy) ----Zabezpečenie nákladu (balík zabezpečenia nákladu pozostávajúci z): * 2 upevňovacie body (13,4 t) vpredu vľavo a vpravo na nosníku čelnej steny * Vpredu a vzadu 1 pár UVV krúžkov (13,4 t), ako aj po stranách po 3 páry UVV krúžkov (10 t), otočných a výškovo nastaviteľných, zaťažiteľných všetkými smermi a zapustených do vonkajšieho rámu * Po stranách po 3 puzdrách na popruhy so súčasnou možnosťou upevnenia s nosnosťou 2 t * Profifix – upínacia lišta v pozdĺžnej osi, umiestnená v strede, v rovnej časti pre upevnenie s nosnosťou do LC 3000 daN ----Rozšírenie: * 6 párov mechanických výsuvných ramien pre celkovú šírku 3 m (ale nie v zadnej sklonenej časti) * Rozšírovacie dosky uložené v strede ložnej plochy ----Rampy: * Hydr. jednodielne rampy, rozmery cca 3 000 x 720 mm * Mechanicky bočne nastaviteľné * Ovládací blok 4-cestný pre neskoršiu dodatočnú montáž hydr. posúvania rampy Kdodpfx Aexptn Roqpot ----Odkladací priestor na vykopávacie ramená: * Odkladací priestor na vykopávacie ramená za zadnou nápravou, plynulo až po koncový nosník (celková dĺžka cca 2 100 mm) * 2 páry upevňovacích bodov LC 6400 daN v odkladacom priestore na vykopávacie ramená po stranách v pozdĺžnom ráme ----Výška ložnej plochy: * Zaťažené cca 910 mm +/- 20 mm, vzduchové odpruženie ----Lakovanie: * Rám vozidla, otočný rám, výsuvné ramená, podperné nohy a rampy žiarovo zinkované * Nápravy, otočný krúžok, vzduchový kotol, ťažné oko lakované v čiernej farbe ----Informácie: * Nové vozidlo so zárukou výrobcu * Chyby a predaj vyhradené ----Doba dodania: * Dodanie od cca 45. týždňa roku 2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 – Profil: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátorové valce * Bubnové brzdy ----Nápravy: * 3 x 11 ton – nápravy Gigant ----Odpruženie: * Vzduchové odpruženie so systémom na zdvíhanie a spúšťanie, ako aj ventilom RtR ----Ohybná oj: * Ohybná oj dĺžky 1 200 mm s ťahovým čapom 40 mm a nastavením výšky pomocou ťahovej pružiny a upínacej svorky ----Elektrická inštalácia / Osvetlenie: * Inteligentná ovládacia doska, namontovaná na prívese ako informačný nástroj (na zobrazenie zaťaženia nápravy – oddelene vpredu a vzadu) * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v kabíne nákladného vozidla prostredníctvom signálu EBS bez inštalácie na strane nákladného vozidla * 15-pólová elektrická zásuvka * LED osvetlenie 12 / 24 V * LED výstražné svetlo (odnímateľné) vzadu ----Všeobecné komponenty: * Bočná ochrana proti nárazu * Výklopné podpery vzadu na ráme vozidla * Mechanicky nastaviteľné balíky výstražných tabúľ vpredu a vzadu * Predný plastový blatník s ochranou proti striekajúcej vode * Zadný rovný oceľový kryt s ochranou proti striekajúcej vode * Nástrojová skrinka z pozinkovanej ocele, rozmery cca 650 x 300 x 600 mm, čierna, práškovo lakovaná, umiestnená na pravej strane * Box v otočnom podvozku pre príslušenstvo s vekom, 2 ks. pevne zabudovaných záveriek, umiestnený priamo za platformou otočného podvozku * 2 ks. schodíkov, pozinkovaných, umiestnených na ľavej a pravej strane otočného podvozku ----Ložná plocha: * ANTISKLUZOVÝ povrch ROBOTER zváraný na oceľovú dosku platformy otočného podvozku (vyčnievajúce zvarové švy) Kodpfx Aqstplwispsdt ----Zabezpečenie nákladu (balík La-Si, ktorý pozostáva z): * 2 upevňovacie očká (13,4 t) vpredu vľavo a vpravo na nosníku čelnej steny * Vpredu a vzadu 1 pár UVV upevňovacích ok, (13,4 t) a po stranách vždy 3 páry UVV upevňovacích ok (10 t), výklopné a spúšťacie, zaťažiteľné vo všetkých smeroch a zapustené do vonkajšieho rámu * Po stranách vždy 3 vrecka na upevňovacie popruhy so súčasnou možnosťou upevnenia zaťažením 2 t * Upevňovacia lišta Profifix v pozdĺžnej osi, umiestnená v strede, v rovine pre možnosť upevnenia nákladu do LC 3000 daN ----Rozšírenie: * 6 párov mechanických výklopných ramien pre celkovú šírku 3 metre (ale nie v zadnej šikmej časti) * Rozširujúce dosky uložené v strede ložnej plochy ----Rampy: * Hydr. jednodielne nakladacie rampy, rozmery cca 3 000 x 720 mm * Mechanicky nastaviteľné po stranách * Ovládací blok s 4 výstupmi pre neskoršie doplnenie hydr. systému posúvania rampy ----Odkladací priestor pre nakladaciu lyžicu: * Odkladací priestor pre nakladaciu lyžicu za zadnou nápravou, prechádzajúci až po koncový nosník (celková dĺžka cca 2 100 mm) * 2 páry upevňovacích očiek LC 6400 daN v odkladacom priestore pre nakladaciu lyžicu, umiestnené po stranách v pozdĺžnom ráme ----Výška ložnej plochy: * naložené cca 910 mm +/- 20 mm, vzduchové odpruženie ----Lakovanie: * Rám vozidla, otočný podvozok, výklopné ramená, podpery a nakladacie rampy, žiarovo zvárané * Nápravy, otočný kruh, vzduchový kotol, ťahová vidlica, lakované v čiernej farbe ----Informácie: * Nové vozidlo s výrobnou zárukou * Chyby a predaj podliehajú výhradám ----Doba dodania: * Dodanie možné od cca 45. týždňa roku 2026

Stav: použitý, maximálna hmotnosť nákladu: 18 100 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, • Výška nakladacej plošiny: približne 880 mm • Hydraulické rampy • Ťažné zariadenie s priemerom 40 mm • Výstražné svetlo • Bubnová brzda • Listové pruženie • 1 x úložný box • Dvojité pneumatiky Kedpfx Ajz A Nhwsqpodt • Nápravy SAF Všetky údaje sú uvedené bez záruky / Zmena si vyhradená.

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 10 210 kg, maximálna hmotnosť nákladu: 35 790 kg, celková hmotnosť: 46 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2025, ďalšia kontrola (TÜV): 01/2027, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 525 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75, stav pneumatík: 80 percento, farba: strieborný, Výbava: ABS, Číslo objektu: #31045 Nápravy BPW Riadená náprava A3 Vyvýšacia náprava Bubnová brzda Pneumatiky 235/75 R 17,5 Nízky náves 8 500 x 2 525 mm Plato vpredu, vrátane rampy 3 300 x 2 495 x 500 mm Hydraulické rampy 4,65 x 0,72 m Umiestnenie pre rameno bagra Lopatový žlab Kedpfjz Dwdcsx Aqpedt 2 páry držiakov kolies 4x výsuvné výstražné tabule Wabco Smart Board Rozšíriteľné na 3 000 mm Rôzne ťažné reťaze pre ťažké náklady ABS/EBS Zdvíhanie/spúšťanie Hliníkové bočné opory 2x opora vzadu Pracovné svetlá Bočná ochrana proti podjazdu Otočné majáky Okrúhly vonkajší rám plata vpredu Leasing alebo financovanie možné na vyžiadanie!!!

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring and turnbuckle ----Lighting / Electrical: * RDÜ tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Removable revolving beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel mud flaps, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm Ksdpfsl Th I Aex Aqpedt * Folding lid (hot-dip galvanized) for tool box on the turntable platform * 4 stake pockets on each side (stakes not included) with lashing possibilities ----Load securing (La-Si package including): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame * 13.4 t load capacity at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanically folding extension arms for a total width of 3 meters (not in the rear slope) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side ramp displacement ----Loading area: * Above turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: Kdodpsl Th Nnjfx Aqpot * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 400 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 10/2011, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 9 750 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 900 mm, celková dĺžka: 11 750 mm, celková šírka: 2 500 mm, Číslo vozidla: 26885 Typ vozidla / nadstavba: Nízko položený náves Prvé prihlásenie: 10/11 Technická kontrola: 09/26 Celková hmotnosť: 24 000 kg / 40 000 kg Vlastná hmotnosť: 8 600 kg Úžitková nosnosť: 15 400 kg / 31 400 kg Celková dĺžka: 11 750 mm Dĺžka nákladového priestoru: celková cca 9 750 mm / cca 7 350 mm, vrátane nízkej plošiny a zadnej časti Šírka: 2 500 mm – 3 000 mm Výška nákladového priestoru: 900 mm Ďalšie informácie: - pozinkované - otočné ťažné zariadenie 40/50 - rozšírenie o 3 m - hydraulické rampy - rampy bočne posúvateľné - hydraulické oporné nohy vzadu - lezecké lišty na rampách a zadnej časti - parabolické pruženie - dvojité pneumatiky - výstražné tabule vpredu a vzadu Kdedpfx Aozz Ezmsqpst - úložný priestor - rozsiahly set uväzovacích prostriedkov - vrecká pre nosníky - žľab pre lyžicu rýpadla - elektrické koleso - LED cúvacie svetlá - všesmerové svetlo

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear Kdedpfx Asrczm Doqpot * Tire pressure monitoring system with in-cab display via EBS signal – no installation needed on the truck side * Warning panel packages front & rear * Side and rear reflective contour tape * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon rear * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel plate as well as basket-type spare wheel holder on the right side * Closed single plastic mudguards at front * Straight steel spray guards at rear, each with spray suppression * Side underrun protection * Extended offset cranked frame 500 mm forward * Turntable platform extended at the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lid * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and on the low-bed platform 60 mm conifer timber * Outer planks of loading ramps made of 50 mm bamboo wood * 4 pocket stakes each side (but no stakes included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and on each side 4 pairs of 10 t lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening boards stored on the left side in a storage compartment * Excavator arm rest above the rear axle up to the start of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side-shift of the ramps on sliding tube from the ramp shaft * Load area above the turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps and mechanical drop supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) Ksdpfxerwc R Ro Aqpodt ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear Ksdoy Ngz Hepfx Aqpodt ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: Kjdsl Tnvgopfx Aqpjdt * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Kdjdpfey Ngzyjx Aqpot ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white Kdjdpfx Ajrwc R Aeqpet * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods Kdsdepk D I Aspfx Aqpst * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brzdy: * Bez ABS / EBS, schváleno pro max. rychlost 40 km/h * Pružinová parkovací brzda * Bubnové brzdy ----Nápravy: * Gigant nápravy ----Pérování: * Tandemový vyrovnávací agregát s 100 mm širokými parabolickými listy ----Tažné oko / Tažná tyč: * Napevno svařená tažná tyč s bezúdržbovou kulovou hlavou pro K80 kulovou spojku (nastavitelná o +77 mm / 33 mm přes čelní desku), s vyvýšeným držákem pro připojovací vedení ----Elektrika / Osvětlení: * 12 V 7 + 4 pólový elektrický kabel * LED osvětlení 12/24 V se sítí proti poškození Kdoder Dpz Hopfx Aqpst * 2 LED pracovní světlomety za vozidlem, ovládané z tažného vozidla bez nutnosti dodatečné instalace na tažném vozidle ----Všeobecné přídavné díly: * Opěrná klika vpředu * Mechanické sklopné podpěry vzadu * Boční obrysová světla s funkcí směrovky * Plastové čtvrtobloukové blatníky * Plastová skříň na nářadí cca 750 x 350 x 300 mm vpravo na boku * Dvoustupňové žárově zinkované schody před čelní stěnou vlevo ----Podvozek: * Rám z jemnozrnné oceli ----Sklápěcí korba: * Ocelová třístranná sklápěcí nástavba s robustními bočnicemi (pevná přední stěna, průběžné boční stěny – bez středových sloupků – kyvné přes manuální centrální zamykání a mechanicky sklopné s pomocí pružinového mechanismu) * Hydraulicky poháněná zadní stěna, výška 500 mm, slouží jako hydraulická skluzavka s úhlem otevření 115° * 4 mm Hardox 450 ocelové dno ----Zajištění nákladu: * V každém rohu 1x utopený a sklopný úvazek, nosnost 7 t * Po stranách vždy 4x utopený a sklopný úvazek na trubku, nosnost 3 t ----Rámy: * 1 pár hliníkových nájezdových ramp (nosnost 10 t/pár, při rozteči náprav nad 2500 mm), rozměr 3 570 x 410 x 120 mm, vhodné pro pneumatiková i pásová vozidla * 2 zasouvací kanály pro rampy vzadu v rámu, zajištění nákladu dle EN 12642 XL ----Výška spojení: * Naložené cca 530 mm, nenaložené cca 590 mm ----Lakování: * Konstrukce lakována odstínem RAL 9010 (čistě bílá) * Rám, tažná tyč, zadní podpěry, ochrana proti podjetí žárově zinkované * Nápravy, vzduchojem, přední opěrná klika * K80 spojka lakovaná černým odstínem ----Informace: * Nový vůz s výrobcem poskytovanou zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizing suspension with 100 mm wide parabolic leaf springs ----Drawbar / Tow Eye: * Fixed welded drawbar with low-maintenance ball seat for K80 ball coupling (offset by +77 mm / 33 mm via mounting plate), with elevated gallows for connection lines ----Electrics / Lighting: * 12 V, 7 + 4-pin power line * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing vehicle ----General Equipment: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Hot-dip galvanized, two-step access ladder in front of the bulkhead on the left ----Chassis: * High-tensile fine grain steel chassis ----Tipper Body: * Steel pallet - 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls – without center stanchions – pivoting via manual central locking and mechanically foldable with side wall torsion springs) * Hydraulic tailgate 500 mm high, usable as a hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing ring recessed and foldable in each corner * 4 x 3 t lashing rings recessed and foldable each side ----Ramps: * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recesses for aluminum loading ramps at the rear, integrated into the chassis * Load securing in accordance with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: Kodpsr Dpzusfx Aqpodt * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment Kdedpfel Th Evox Aqpet * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, prvá registrácia: 03/2009, celková hmotnosť: 40 000 kg, pohotovostná hmotnosť: 8 150 kg, farba: modrá, typ prevodu: iný, emisná trieda: žiadny, maximálna hmotnosť nákladu: 31 850 kg, ďalšia kontrola (TÜV): 09/2027, zavesenie: vzduch, dĺžka ložného priestoru: 9 800 mm, šírka ložného priestoru: 2 510 mm, veľkosť pneumatiky: 235/75 R17.5, veľkosť prednej pneumatiky: 235/75 R17.5, veľkosť zadnej pneumatiky: 235/75 R17.5, kabína vodiča: iný, Výbava: ABS, hmlové svetlá, osvetlenie, pneumatická brzda, podvozok, registrácia nákladného vozidla, ďalšie svetlomety, Müller-Mitteltal T4 Kompakt – nízkopodvozný príves * Otočné ťažné oko – 40 mm + 50 mm * Rozširiteľný na 3 m, vrátane bočných nosníkov * Hydraulické rampy, manuálne nastaviteľné do šírky * Spätná kamera * Bubnové brzdy * 1 okrúhle výstražné svetlo vzadu * Vzduchové pruženie * Dvojité pneumatiky * Nápravy Gigant * ABS + pripojenia DUO-Matic * Tabule pre označenie nadmernej šírky vpredu a vzadu * Pneumatiky: 235/75 R17.5 * Oceľová skrinka na plošine * Dĺžka rampy: 2,90 m * Rozmery: vnútri: dĺžka – 9,80 m, šírka – 2,55 m * Výška nakladacej hrany plošiny: 1,05 m, výška nakladacej hrany vzadu: 0,85 m * Hmotnosti: celková hmotnosť – 40 000 kg, hmotnosť na náprave: 8 150 kg, užitočná hmotnosť – 31 850 kg * Nemecké vozidlo s nemeckými dokumentmi!! * Druhý majiteľ!! * Dátum prvej registrácie: 20. 03. 2009 * Nová STK platná do 09/2027 Ksdpfx Aqoz Dv Iyjpjdt * Nová technická kontrola platná do 03/2027 * VIN: WMM000009052911 Zmena cien, chyby a zmeny vyhradené! Na niektorých obrázkoch boli logá spoločností čiastočne odstránené – prosím, informujte sa! Funkčnosť príslušenstva bez záruky! Váš kontakt: Christoph Ott Tel. + WhatsApp:

Stav: použitý, maximálna hmotnosť nákladu: 27 300 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2013, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 11 700 mm, šírka ložného priestoru: 3 000 mm, celková šírka: 2 550 mm, celková výška: 3 700 mm, Výbava: ABS, * Labutia krk s úložnými boxmi * Nasledujúce riadené nápravy * Hydraulické nakladacie rampy * Nízko položené, rozšíriteľné podvozky ----* Rozmery pneumatík: 235/75R17,5 * Technická celková hmotnosť: 42 000 kg * Vlastná hmotnosť: 8 700 kg * Celková dĺžka: 13 150 mm * Termín platnosti STK: 02.2027 ----Číslo vozidla/Vehicle: 12148----Vyhradzujeme si právo na chyby a prípadný predaj vozidla inému záujemcovi.----Reklamné prvky a rôzne nápisy boli digitálne odstránené.-----Radi vám pomôžeme so všetkými formalitami, ktoré sú spojené s nákupom vozidla. Stačí, ak nám oznámite vaše priania a návrhy a my sa postaráme o zvyšok. Okrem iného vám môžeme za príplatok ponúknuť nasledujúce služby:----Preberanie vášho starého vozidla * Kontrola STK/technická kontrola * Kompletné vybavovanie exportu Kdedpfx Aqsz A N Anspot * Sprostredkovanie financovania * Žiadosť o exportné evidenčné číslo * Preprava vozidiel * Registrácia vozidiel * Pomoc pri odťahovaní a preprave vozidiel ----?Váš VTS TEAM

Stav: použitý, maximálna hmotnosť nákladu: 23 900 kg, celková hmotnosť: 31 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2007, Rok výroby: 2007, Interné číslo vozidla: G400178 Okamžite k dispozícii na našom dvore v Kaufungen Viac informácií nájdete na: Luis Lucena Kodpszahg Dofx Aqpsdt Viktoria Sologubova NEMECKY Müller-Mitteltal TS2 KOMPAKT – nízko položený príves ? 2 nápravy ? hydraulické rampy Robustný nízko položený príves Müller-Mitteltal TS2 KOMPAKT, vyrobený v roku 2007. Tento dvojnápravový príves je vybavený hydraulickými rampami, vzduchovým odpružením a úžitkovou hmotnosťou 23 900 kg. Vďaka povolenej celkovej hmotnosti 31 000 kg je obzvlášť vhodný na prepravu ťažkých stavebných a pracovných strojov. Technické údaje: * Číslo vozidla: G400178 * Stav vozidla: Použité vozidlo * Kategória: Nízko položený príves * Výrobca: Müller-Mitteltal * Model: TS2 KOMPAKT * Prvá registrácia: 06/2007 * Rok výroby: 2007 * Nápravy: 2 * Povolene celková hmotnosť: 31 000 kg * Pohotovostná hmotnosť: 7 100 kg * Úžitková hmotnosť: 23 900 kg * Celková dĺžka: 10 800 mm * Nemecký príves Výbava: * Hydraulické rampy * Vzduchové odpruženie * Dvojnápravový podvozok * Robustná konštrukcia nízko položeného prívesu Prehliadka a funkčná kontrola sú možné po predchádzajúcom dohodnutí termínu. Ďalšie informácie, fotografie a videá vám radi poskytneme na vyžiadanie. Chyby, zmeny a predaj vyhradený. ANGLICKY Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 nápravy – hydraulické rampy Robustný nízko položený príves Müller-Mitteltal TS2 KOMPAKT, vyrobený v roku 2007. Tento dvojnápravový príves je vybavený hydraulickými rampami, vzduchovým odpružením a úžitkovou hmotnosťou 23 900 kg. Vďaka povolenej celkovej hmotnosti 31 000 kg je obzvlášť vhodný na prepravu ťažkých stavebných a pracovných strojov. Technické špecifikácie: * Referenčné číslo: G400178 * Stav: Použité * Kategória: Nízko položený príves * Výrobca: Müller-Mitteltal * Model: TS2 KOMPAKT * Prvá registrácia: 06/2007 * Rok výroby: 2007 * Nápravy: 2 * Povolene celková hmotnosť: 31 000 kg * Pohotovostná hmotnosť: 7 100 kg * Úžitková hmotnosť: 23 900 kg * Celková dĺžka: 10 800 mm * Nemecký príves Výbava: * Hydraulické rampy * Vzduchové odpruženie * Dvojnápravový podvozok * Robustná konštrukcia nízko položeného prívesu Prehliadka a funkčná kontrola sú možné po predchádzajúcom dohodnutí termínu. Ďalšie informácie, fotografie a videá vám radi poskytneme na vyžiadanie. Chyby, zmeny a predaj vyhradený. Vyhradzujeme si právo na chyby. Radi vám započítame vaše použité vozidlo. Financovanie je možné priamo u nás. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: Nemecky, Anglicky, Španielsky, Poľsky, Ukrajinsky, Rusky, Bulharsky.

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V Kdjdpfjq Euakex Aqpot * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Kedpfeywvhrex Aqpjdt

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy Kjdpfxow Tgkbj Aqpsdt * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid Kedpjykx Nkjfx Aqpjdt * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Kdedpfxjykx Nqe Aqpst * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid