Pracovná plošinová náves

MÜLLER-MITTELTAL 3-achs mit Radmulden, 2 Ladehöhen, Klapprampen

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform Iedoq Euakopfx Ag Tohu * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: Iodpfx Agetpta Dj Tshu * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 36 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Ijdpfsykx Nqox Ag Tjhu * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid