Faymonville Max Trailer 3-Achs-Plateau-Sattelaufl. kúpiť použité (54 537)

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) Djdjiu Etkspfx Am Uocn - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear Dcodpfx Amel Ux Rwj Ujn - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO Dodpfxoi Dwlws Am Ujcn - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: Dcedpok Eammsfx Am Uen JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi Dsdpfxjhlz Sho Am Uocn

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Dsdoikyh Hspfx Am Uocn Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder Djdpfohlz S Nox Am Uecn •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, maximálna hmotnosť nákladu: 92 045 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: > 3 nápravy, Výbava: ABS, Výber z vybavenia Kompletná výbava na vyžiadanie * 1 x labutia krk MAX710-krk-V-30-2,70 * Labutí krk hydraulicky výškovo nastaviteľný a vysúvateľný * Dĺžka cca 3 650 mm. Pre návesné ťahače 6x4 alebo 8x4 * Oceľová čelná stena, výška cca 400 mm * Na labutí krk sa dajú pripevniť hliníkové bočné steny a zadná stena, výška cca 400 mm, v eloxovanej verzii * 3,5-palcová kráľovská spojka * Hydraulický prípoj pre návesný ťahač s regulátorom prietoku (20 l/min) * vrátane zábradlia na zavesenie prívodných potrubí * nádrž návesného ťahača musí mať minimálne 80 l, s spojkami MAX Trailer, inak dodá zákazník spojky samostatne * BEKA-MAX centrálne mazanie pre labutí krk s normálnym tukom NLGI-2 * TPMS systém kontroly tlaku v pneumatikách * Dve skrinky na náradie INOX, cca 855 x 340 x 390 mm, na labutom krku, vľavo a vpravo (± 48 kg) * 1-valcový dieselový motor Hatz (Silent Pack) s elektrickým štartérom a štartovacou batériou * Hydraulické spojovacie potrubia medzi agregátom a prípojnou platňou na labutom krku * Diaľkové ovládanie: ovládanie agregátu, štart/stop dieselového motora Dcsdpfx Aozzhfnem Uon * Ovládanie pomocného riadenia, okrem ovládania pomocou kábla * S 2 LED kontrolkami na prijímači ako kontrola jednosmernej jazdy * Ovládanie výškového nastavenia labutieho krku * Ovládanie výškového nastavenia odpruženia podvozku * Hydraulické prípojky Multikupplung na labutom krku * 1 LED pracovné svetlo vľavo a vpravo na zadnej doske labutieho krku so samostatným vypínačom * Štyri výsuvné výstražné tabule, cca 2 000 mm, cca 423 x 423 mm, s LED polohovacím svetlom a držiakom na výstražné svetlo (± 122 kg) * 1 x 3-nápravový kompaktný predný podvozok * MAX710 podvozok PA-F-3-19,5-1,36-2,85 * Predná a zadná spojka * Dĺžka: cca 3 560 mm * Šírka podvozku: cca 2 850 mm * Predný podvozok so samostatným pripojením pre vzduchový kompresor * BEKA-MAX centrálne mazanie pre 3-nápravový podvozok s normálnym tukom NLGI-2. * Jedna 7-pólová zásuvka vľavo a vpravo vzadu na prednom podvozku pre výstražné tabule * TPMS systém kontroly tlaku v pneumatikách podľa normy ECE R 1411 * LED pracovné svetlo vľavo a vpravo na zadnej strane predného podvozku so samostatným vypínačom * Povrch predného podvozku s nanesenou vrstvou piesku ako ochrana proti pošmyknutiu * Hydraulické prípojky Multikupplung na prednom podvozku. * 1 x podvozok pre ťažké bremená: MAX710-podvozok pre ťažké bremená-A-7,15-(430)-2,85 * Vysúvateľný podvozok pre ťažké bremená BB-A s prejazdovými háčikmi vpredu a spojkou s čapmi vzadu * Základná šírka: cca 2 850 mm, dĺžka: cca 7 150 mm * Výška nosníka: cca 430 mm, šírka nosníka: cca 1 350 mm * Výška nákladu cca 580 mm pri voľnej výške podvozku cca 150 mm * 6 párov oceľových rohoží s gumovou podlahou, cca 1 000 mm, 1 pár cca 500 mm (± 1 660 kg) * Možnosť montáže skrutiek (ø cca 40 mm) každých cca 500 mm zvonka na hornom páse vonkajšej trubice podvozku pre ťažké bremená na montáž skrutkovacích krúžkov (LC 16 000 daN) * Možnosť montáže skrutiek M30 každých cca 1 000 - 1 200 mm zvonka na vnútornej trubici podvozku pre ťažké bremená na montáž skrutkovacích krúžkov (LC 10 000 daN) * Skladacie rozšírenia s oceľovými rohožami, nastaviteľná šírka od cca 2 850 mm do cca 3 250 mm * TPMS systém kontroly tlaku v pneumatikách * Pár voľných plastových podložiek HeProLen s priečnymi lamelami, cca 1 200 x 450 x 50/400 mm (± 130 kg) * 2 páry skrutkovacích ok M30 (LC 12 000 daN) (+-13 kg) * Stredový nosník podvozku pre ťažké bremená s nanesenou vrstvou piesku ako ochrana proti pošmyknutiu * Hydraulické

Stav: použitý, prvá registrácia: 02/2008, Rok výroby: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3-nápravový plochý náves∗Riadené nápravy∗ALCOA∗ !!! veľmi dobrý stav !!! ● ABS ● Vzduchové odpruženie ● Zdvihací/spúšťací zariadenie ● Výška podlahy: 1 420 mm ● Alcoa - Dura Bright disky ● 3 x Mercedes nápravy s kotúčovými brzdami ● všetky 3 nápravy riaditeľné! ● Pneumatiky: 385/55 R 22.5 ● Hĺbka dezénu: 3/2 / 5/4 / 5/6 mm ● Celková hmotnosť: 42 000 kg ● Pohotovostná hmotnosť: 10 200 kg ● Nosnosť: 31 800 kg - nemecký náves - TK / STK: na vyžiadanie a za príplatok: NOVÉ! Chyby a medzipredaj vyhradené! = Ďalšie informácie = Djdpfxjyutxzo Am Uscn Pre viac informácií kontaktujte Joannis Arpantzanis alebo Kai Bühler.

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: Dcedorq Dlfspfx Am Uen - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 620 mm, šírka ložného priestoru: 2 540 mm, celková šírka: 2 540 mm, Rok výroby: 2026, Výbava: ABS, WEB TRAILER PRSH 27 FLATBED with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height approx. 1,280 mm at 1,150 mm fifth wheel height Spring center approx. 1,300 mm Kingpin load max. approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made of welded longitudinal beams and inserted cross members Outer frame height approx. 125 mm, 4 mm thick, with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, 5t each!! Landing gear: 24t telescopic landing gear, branded (Jost/SAF) Axles: Branded (SAF/BPW/JOST) 9t 22.5" large disc brake, total travel approx. 180 mm Without axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system, Knorr or Wabco Air connections, red and yellow coupling head Raise and lower system with 1 rotary slide valve, Knorr/Wabco Air tanks 2 x approx. 80 l Tire pressure monitoring Dcodsg Dkx Eepfx Am Uen Lighting: LED lighting 15-pin front connection Flashing side marker lights Tyres: Branded tyres 385/65 R 22.5 on steel rims Body: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof 28 mm hardwood floor alternating with galvanized Omega steel profiles Hardwood planks bolted to the cross members (optional double bolting) Floor: Certificate for tested forklift axle load of 9.0t according to DIN EN 283 Accessories: Premium rear lamp bracket, large and edged Rear underrun protection, welded version (rectangular tube) Access ladder, rear right, foldable and extendable with platform Two wheel chocks with holder, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Novagrau 7350 Other colors available at extra cost (subject to powder availability) KTL with zinc phosphating plus powder coating for highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show special equipment Consult us for a free and non-binding quote. Leasing, financing, or hire-purchase possible! We can accommodate your requirements! Contact us – we will gladly prepare an offer for you. Errors and interim sales excepted!!!

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33901014232, pohotovostná hmotnosť: 5 900 kg, maximálna hmotnosť nákladu: 29 100 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2025, dĺžka ložného priestoru: 13 650 mm, výška ložného priestoru: 900 mm, celková dĺžka: 13 800 mm, celková šírka: 2 550 mm, celková výška: 2 638 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17,5", farba: strieborný, The images are archive photos! The vehicle may be in use! Chassis: Semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Drive-over and loadable with construction/agricultural machinery up to a maximum gross weight of 24,000 kg and up to a maximum machine width of 2,480 mm (the track width of the machinery or vehicles to be transported must not exceed 2,200 mm). Hook-on bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded). Slightly sloped outer frame, new design with “Load-Lock profile” for attaching lashing straps 14 pairs of recessed lashing eyes in the outer frame, each rated for 2.5 t 6 pairs of recessed lashing eyes in the outer frame, each rated for 5 t 24 t, 2-speed landing gear, single-side operation, straight base, without load equalizer Free landing leg corner or free rear swing radius approx. 1,920 mm Foldable rear support 2x wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in steel Quarter shell mudguards in front of and behind each axle With anti-spray mudflaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same brand as standard tyres, steel rim Axles & Suspension SAF drum brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and traction aid, no truck installation required (traction aid functions up to a 30% axle overload and up to a max speed of 25 km/h) Braking system 2-line compressed air brake system Colour-coded piping for ease of service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, no connecting line 24-volt EBS (Electronic Braking System) with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS system! With lift & lower valve Vehicle stability system "TPMS" tyre pressure monitoring system to ECE R141, display via monitor in towing vehicle, via EBS, without truck installation (the truck must be prepared accordingly – applies to standard tyres only) Wheels and Tyres 235/75 R17.5 twin tyres Steel rims, factory silver Electrics Dodpfsxb D Swjx Am Uecn 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicators, "flashing side marker lights" 2 white LED front position lights 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, no connection cables Floor Approx. 30 mm thick phenolic resin-coated plywood, high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts, high-volume design Front bulkhead interior additionally lined with 1,250 mm high phenolic resin-coated plywood Galvanised frame The images are archive photos! The vehicle may be in use!

Stav: použitý, maximálna hmotnosť nákladu: 14 700 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2007, dĺžka ložného priestoru: 10 350 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 850 mm, celková dĺžka: 12 000 mm, celková šírka: 2 550 mm, Celková dĺžka: 12 000 mm Dĺžka ložnej plochy: cca 10 350 mm Dcodoz D R D Nopfx Am Usn Šírka: 2 550 mm / ložná šírka cca 2 400 mm Výška loženia: cca 850 mm Ďalšie informácie: - 3. náprava nútene riadená - Vnútorná ložná výška cca 3 150 mm - Dvojmontáž pneumatík 215/75R17,5 - Nápravy BPW - Vzduchové odpruženie - Posuvná plachta Vozidlo môže byť polepené reklamou, označené nápismi a/alebo s pozostatkami označení. K dispozícii viac kusov.

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 6 640 kg, celková hmotnosť: 40 000 kg, prvá registrácia: 02/2023, dĺžka ložného priestoru: 13 510 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 445/45 R 19,5, farba: sivý, Rok výroby: 2023, 3-axle mega flatbed semi-trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Dcjdpfov Darpex Am Uen Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide under-run nose approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on longitudinal beam - 2 pairs of ferrylashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall, approx. 2,000 mm high, with sheet metal cladding, bolted design - Premium large and folded rear lamp bracket - Rear underrun protection, welded design (rectangular tube) - Side underrun protection, both sides Landing gear - 24 t telescopic landing legs, single-sided operation, semi-circular with base plate Axles/Suspension - 3 axles at 8 t each (technically 9 t), disc brake - 2nd ride height: switch for 2nd ride height on holder raises and lowers (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Bracket for lifting and lowering device, bolted design - 6 tyres 445/45 R 19.5 - Wheel mounting with centering Brakes - Two-line air pressure brake system according to EC Directive 71/320 - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Red and yellow coupling buttons - Lifting and lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, black coated (1x brake, 1x lift and lower) Lighting - 24-volt lighting system with large multifunction rear lamps - Side marker light (LED) with reflector - Position light front, bottom, white, one each right and left - 15-pin plug or socket at front - EBS socket - Number plate illumination Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor bolted onto cross members - Omega profiles bolted to respective end frame Paintwork - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Accessories - Conspicuity markings for platform vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, removable - Holder for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x extendable warning panels - Access ladder right rear, foldable and extendable at rear - 2x wheel chocks with holders - 2 rubber buffer rear corners - Mud flaps at rear - Plastic mudguards with anti-spray mud flaps - 4 pairs of container locks with retractable twist locks, countersunk into the floor, incl. additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open box made of perforated sheet metal, longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stav: nový, maximálna hmotnosť nákladu: 90 700 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: > 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Our entire vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full configuration available on request. Gooseneck: Gooseneck hydraulically lift/lowerable and removable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook pickups at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design with fixed hardwood floor approx. 50 mm thick, * with drive-over bridge hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm Dcodpfxow Tgp Do Am Uen * Pendulum axles 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX centralized lubrication for a gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for a 3-axle bogie * Preparation for mounting screw-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Recesses on the outside of the loading platform's outer beams for fitting foldable extensions * One 7-pin socket left and right, front and rear on the rear bogie for warning boards * BEKA-MAX centralized lubrication for a 5-axle bogie * At the rear bogie, a socket for the cable remote control of the rear steering * Rear chassis with trough * 2 LED reversing lights fitted on the rear panel * European warning panels (red-yellow) at the rear * One mud flap at the rear * One LED revolving beacon with bracket left and right on the rear cross member * Two stainless steel toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle ...

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33901014200, pohotovostná hmotnosť: 6 700 kg, maximálna hmotnosť nákladu: 28 300 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, výška ložného priestoru: 900 mm, celková dĺžka: 13 800 mm, celková šírka: 2 550 mm, celková výška: 2 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17,5", stav pneumatík: 100 percento, farba: sivo-čierny, Chassis semi-trailer for logistics Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Dodpfx Aeza A Txom Uecn Slightly angled outer frame, new design with "Load-Lock profile" for securing lashing straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Free landing gear foot dimension or free rear swing-out radius approx. 1920 mm 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in steel Quarter-shell mudguards in front of and behind each axle Splash flaps in front of first axle and behind each axle, with antispray, as per EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles & Suspension SAF drum brake axles "Laser-measured axles/chassis" for reduced tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-assist; operated by "brake three times" (start-assist operates up to 30% excess axle load and up to a max. speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Brake System Dual-line compressed-air brake system Color-coded piping for easy maintenance Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles able to ensure ABS function! With lift & lower valve Vehicle stability system Wheels and Tires 235/75 R17.5 tires, make at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin swap-proof sockets at front, without connecting cables Floor Phenolic-coated plywood, approx. 30 mm thick, high point-load resistance, suitable for forklift axle load up to max. 5600 kg Front wall / Corner posts 25 mm aluminum hollow profile, 1350 mm high, steel corner posts in volumetric design Country of Registration/Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Nova grey Front corner posts: Hot-dip galvanized Front wall: Aluminum

Stav: veľmi dobrý (použitý), konfigurácia náprav: 2 nápravy, povolené zaťaženie nápravy (náprava 1): 10 500 kg, dovolené zaťaženie nápravy (náprava 2): 10 500 kg, prvá registrácia: 06/2017, celková dĺžka: 7 000 mm, celková šírka: 2 500 mm, celková výška: 880 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/70 R17.5, stav pneumatík: 75 percento, farba: iný, Rok výroby: 2017, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = Dcodpfez Azd Tjx Am Uen - 2 nápravy - vzduchové odpruženie = Ďalšie informácie = Rozmer pneumatík: 235/70 R17.5 Dezén pneumatík: 75 % Brzdy: bubnové brzdy Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 500 kg Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 500 kg Celková povolená hmotnosť: 21 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý ŠPZ: QALO590

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení Dodpfx Ameiu Etro Uocn • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: použitý, pohotovostná hmotnosť: 5 140 kg, maximálna hmotnosť nákladu: 18 860 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1991, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 9 350 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 245 / 70 R 17,5, farba: oranžová, typ prevodu: iný, veľkosť prednej pneumatiky: 245 / 70 R 17,5, veľkosť zadnej pneumatiky: 245 / 70 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Základná farba: oranžová Ďalšie prvky výbavy: Otočný podvozok, vysoká nadstavba, odpruženie: vzduchové, užitočné zaťaženie (kg): 18 860 Typ nadstavby: 3-nápravový plošinový príves (veľmi stabilný), dĺžka x šírka x výška 9 350 x 2 500 mm, výška ložnej plochy 1 010 mm, nápravy BPW s listovými pružinami, bubnové brzdy, ťažné zariadenie so zahnutou oskou, dĺžka cca 2 200 mm s ťažnou guľou 40 mm, vzduchové prípojky červená/žltá, 2 x 7-pólová zásuvka, BEZ ABS + EBS! Dcodpfoz Hcqgsx Am Usn

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering Dodpfx Aou Hp Hrom Uscn - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: Dcjdpfx Amjma Hf Re Usn • One spare wheel with holder in front of the bulkhead • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33901011222, pohotovostná hmotnosť: 5 741 kg, maximálna hmotnosť nákladu: 33 259 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2022, dĺžka ložného priestoru: 13 650 mm, šírka ložného priestoru: 2 480 mm, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 3 345 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R19,5", stav pneumatík: 60 percento, farba: červená, Pozor: Na obrázkoch sú použité archívne fotografie. Vozidlo je v prevádzke! Celková prípustná/technická hmotnosť agregátu: 24 000 / 27 000 kg Celková prípustná/technická hmotnosť sedla: 11 000 / 12 000 kg Celková dĺžka približne: 13 850 mm Celková šírka max.: 2 550 mm Celková výška približne: 3 345 mm Dĺžka ložnej plochy približne: 13 650 mm Šírka ložnej plochy približne: 2 480 mm Výška sedla približne: 950 mm Rozmery upevnenia kráľovského čapu približne: 1 680 mm Predný uhlový rozmer približne: 2 040 mm #Podvozok, sedlo, prepravná spoločnosť Konštrukcia z jemnozrnnej ocele, sedlová doska s vymeniteľným 2" kráľovským čapom Vonkajší rám mierne šikmý s profilom „Load-Lock“ na pripevnenie uväzovacích pásov. Poznámka! Na pripevnenie pásov v kombinácii s bočnicami je potrebné bočnice otvoriť! „Patentovaný „Load-Lock-Cross“ na pripevnenie uväzovacích pásov, v priečnom nosníku pod vonkajším rámom. 24 t, dvojstupňový zdvihák, ovládanie z jednej strany, s rovným spodným dielom, bez kompenzácie posuvu. Poznámka: Voľný uhlový rozmer oporného bodu, resp. voľný polomer výkyvu dozadu približne 1 930 mm. Výsuvné rebríky na zadnej strane 2 podložky s držiakom Bočný ochranný nárazník z hliníka Paletový box pre 8 europaliet Spodný ochranný nárazník z pozinkovanej ocele Štvrtové blatníky pred 1. nápravou a za každou nápravou s protisprejovými zásterami za každou nápravou 2 plastové skrinky na náradie Zámky pre kontajnery, 4 páry zapustené v podlahe pre 2 x 20-stopové kontajnery, celková vzdialenosť medzi zámkami pre kontajnery približne 600 mm, zámky pre kontajnery v zapustenej verzii, bez adaptéra! Zámky pre kontajnery je možné vysunúť na rozmery 2 760 mm a 2 820 mm. 2 rady upevňovacích/rozperných líšt na pozdĺžnych nosníkoch, zapustené v strede v podlahe 7 kusov upevňovacích/rozperných líšt priečne zapustených v podlahe v celej šírke až po vonkajší rám #Nápravy + odpruženie Nápravy s kotúčovými brzdami SAF „Nápravy/podvozok laserovo zameraný“ – znižuje opotrebovanie pneumatík a spotrebu paliva Vzduchové odpruženie #Brzdový systém Dvojokruhová brzdová sústava s pneumatickým tlakom, farebné usporiadanie potrubí pre ľahšiu údržbu Brzda s pružinovým akumulátorom 2 bezpečné spojky v prednej časti EBS, elektronický brzdový systém so zásuvkou EBS v prednej časti s ventilom pre zdvíhanie a spúšťanie Systém stability vozidla počas jazdy Dcodpfjzv Sq Rjx Am Usn #Elektrická inštalácia 24 V, viackomorové svetlá, bočné žlté LED osvetlenie 2 x 7-pólové bezpečné zásuvky v prednej časti 2 dodatočné LED pracovné svetlá 2 páry výstražných tabúľ, dvojité LED osvetlenie a vysúvateľné na 3 000 mm #Podlaha Dosky lisované za tepla, hrúbka približne 30 mm, na pozdĺžnych nosníkoch pre vysokú bodovú únosnosť, maximálna nosnosť pre nápravu vysokozdvižného vozíka 7 100 kg #Čelná stena / Rohové výstuhy vpredu Oceľová čelná stena HANGLER, výška približne 2 600 mm Čelná stena je zvnútra dodatočne obložená doskami lisovanými za tepla po celej výške #Lakovanie Rám žiarovo zinkovaný vrátane pasivácie + vonkajší rám finálne nalakovaný v odtieni RAL 3000 Feuerrot (ohnivá červená). „15-ročná záruka proti prekorózii“. Pozor, archívne fotografie!

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: Produktpalette, pohotovostná hmotnosť: 6 000 kg, maximálna hmotnosť nákladu: 32 000 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 650 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 790 mm, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5", stav pneumatík: 100 percento, farba: originál, Rok výroby: 2026, Šetrite náklady na dopravu! Na požiadanie dodávame až tri plošiny ako priestorovo úsporný 3-vrstvový systém. Týmto spôsobom získate výrazne nižšie náklady na dopravu. Riešenie pre dopravu na mieru Konfigurujte si vozidlo Fliegl podľa vašich potrieb. Zobrazené vozidlo je len príklad. Výroba a výbava sa realizujú individuálne podľa požiadaviek zákazníka. #Podvozok, oje, prepravná spoločnosť Konštrukcia z jemnozrnnej ocele, ojová doska s vymeniteľným 2" kráľovským čapom Vonkajší rám mierne naklonený, nová verzia s „Load-Lock-profilom“ na upevnenie uväzovacích pásov 24 t, dvojrýchlostná zdvíhacia páka, ovládanie z jednej strany, s polkruhovou spodnou časťou a priamou spojovacou doskou, so systémom vyrovnávania tlaku Poznámka: Voľný uhol opory a voľný uhol otáčania dozadu cca 1930 mm Výsuvné rebríky v zadnej časti Zaisťovač dverí na boku Dedpfjzmtc Aex Am Ujcn 2 podkladové kliny s držiakom Bočné ochranné prvky z hliníka Spodná ochrana z pozinkovanej ocele Štvrtinové blatníky vpredu a vzadu za nápravovou jednotkou s protisprejovými zásterami podľa EÚ Nárazový ochranný prvok v zadnej časti 2 držiaky náhradnej pneumatiky pre 1 pneumatiku, so sadou upevnenia pneumatiky 1 náhradná pneumatika, rovnaký výrobca ako základná pneumatika, oceľový disk 1 plastová skrinka na náradie, š/v/h = 600 / 425 / 460 mm, uzamykateľná #Nápravy + odpruženie Nápravy s kotúčovými brzdami BPW s priemerom kotúča 430 mm „Nápravy/podvozok laserovo zameraný“, zníženie opotrebovania pneumatík a spotreby paliva Vzduchové odpruženie 1. náprava – automatická zdvíhacia náprava, vrátane núteného spúšťania a pomocníka pri rozjazde, aktivácia pomocou „3x stlačenie brzdy“ (pomocník pri rozjazde je funkčný do prekročenia zaťaženia nápravy o 30 % a do rýchlosti max. 25 km/h) #Brzdový systém Dvojokruhový brzdový systém stlačeným vzduchom Farebné vedenie potrubia pre ľahkú údržbu. Brzda s pružinovým akumulátorom 2 vzájomne zameniteľné brzdové hlavice vpredu, bez spojovacieho potrubia EBS, elektronický brzdový systém s EBS zásuvkou vpredu, bez spojovacieho kábla Pozor: Prívesné vozidlo smú ťahať len ťahače, ktoré zaručujú funkčnosť systému ABS! s ventilom na zdvíhanie a spúšťanie Systém stability vozidla počas jazdy #Kolesá a pneumatiky 385/65 R22.5", oceľové disky, továrenská strieborná farba #Elektrická inštalácia 24 V, viackomorové svetlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu 2 bielo/červené obrysové svetlá vzadu 2 x 7-pólové zásuvky vpredu, bez spojovacieho kábla #Podlaha Prepravované dosky, hrúbka cca 30 mm, uložené na 8 pozdĺžnych nosníkoch pre vysokú bodovú únosnosť, maximálne zaťaženie nápravy pre vysokozdvihový vozík do 7 900 kg V zadnej časti oceľová/vafľová podlaha, pripevnená na cca 300 mm #Čelné steny / bočné profily vpredu 1350 mm vysoké, bočné profily z ocele, uvoľňovací mechanizmus pre bočnú plachtu na čelnej stene, „Crash-Blocker“, v dolnej časti vnútornej strany, vo výške cca 140 mm, s oceľovou ochranou proti nárazu #Krajina registrácie/ štítky Nemecko Typové schválenie podľa EÚ 2007/46 Nonstop servisná linka voliteľné – nakládka do 3-vrstvového balíka Certifikát výrobcu Fliegl pre pevnosť konštrukcie podľa EN 12642 XL Výstražný štítok podľa ECE - 70

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Djdpfx Ash Etf Rjm Uecn Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, maximálna hmotnosť nákladu: 16 390 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 480 mm, celková výška: 860 mm, Výbava: ABS, MAX Trailer 300 NEW | 7.0 m Loading Platform | 16.4 t Payload | Ramps | from €38,600 New vehicle – individually configurable for your specific application. Compact and robust low-loader trailer designed for the safe transport of machinery, equipment, and vehicles. Engineered for high payload, easy handling, and cost-effective use in daily operations. ---Highlights--- • Approx. 16,390 kg payload • 7,000 mm loading platform length • Rear chamfer for easy ramp access • Aluminum ramps, manually movable • Ramp load capacity up to 24,000 kg per pair • BPW axles with air suspension • EBS braking system • Compact dimensions – ideal for construction sites & service applications ---Technical Data--- • Gross weight: 21,000 kg • Unladen weight approx.: 4,610 kg (±3%) • Payload approx.: 16,390 kg • Loading platform length: 7,000 mm • Overall width: 2,480 mm • Loading height at max load: approx. 860 mm • Coupling heights: 700 / 775 / 850 mm • Max speed: 80 km/h ---Standard Equipment--- • Loading platform with hardwood floor (approx. 38 mm) • Tread plate covering over axles • Lashing points up to LC 5,000 daN and recessed lashing rings in the frame • Cut-outs in outer frame for lashing straps • BPW axles, air-suspended, drum brake with lift/lower function • EBS braking system (2S/2M) with spiral cable • ASPÖCK NORDIK LED lighting Djdpoypa Apjfx Am Ujcn • TPMS tire pressure monitoring system (ECE R141) ---Included Options / Accessories--- • Drawbar approx. 1,750 mm with 50 mm towing eye • Galvanized steel front wall approx. 400 mm • Spare wheel with holder on drawbar • Mechanical support leg at the front • Galvanized folding supports under rear chamfer • European rear reflector plates • White reflector strips on sides and rear • Rotating beacon holder at the rear • Holders for warning panels incl. socket • Mud flaps with MAX logo • Additional license plate bracket at rear right • Manual & documentation on USB stick Further equipment and individual modifications available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary based on configuration.