Müller-Mitteltal Príves S Hákovým Nakladačom kúpiť použité (59 637)

Stav: použitý, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, Výbava: ABS, * Müller Mitteltal 3-nápravový príves pre abroll kontajnery * Typ TM 2 24 * Pre dva abroll kontajnery od 7 do 10 m³ * Zaistenie nákladu len dvoma reťazami na každý kontajner * Dvojitá pneumatika 265/70 R19,5 * Vzduchové odpruženie * Nápravy BPW * Otočný oje pneumaticky sklopiteľné s pneumatickým odistením Hedpfx Aoyx R Enjqlsnl * 8 UVV kotviacich ôk 5t na upevnenie upínacích prvkov * 8 preklápateľných dorazov kontajnerov na bočné centrovanie * EBS * Technicky prípustná celková hmotnosť 27 000 kg

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment Hodsl Tihuspfx Aqlonl ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension Hnedpsxptn Dsfx Aqlol ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: použitý, konfigurácia náprav: 2 nápravy, objem nakladacieho priestoru: 10 m³, celková dĺžka: 7 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2012, Aplikačný materiál: Betón Hrubá hmotnosť: 6.530 kg Užitočné zaťaženie: 25.470 kg Hedpfex Utq Sjx Aqlonl CELKOVÁ HMOTNOSŤ: 32.000 kg

Stav: použitý, maximálna hmotnosť nákladu: 15 100 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/1987, dĺžka ložného priestoru: 8 650 mm, šírka ložného priestoru: 2 480 mm, ? Mechanické rampy ? Nakladacia výška: cca 910 mm ? Držiak rezervného kolesa ? Ťažné oko 40 mm ? Maják ? Bubnová brzda ? Listové pružiny ? 1 x úložný box ? Dvojmontáž pneumatík Hnodpfoyw Egwjx Aqlsl ? Nápravy SAF Všetky údaje bez záruky / Medzipredaj vyhradený.

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ systém kontroly tlaku v pneumatikách * Nouzové odpojení pro válce s perovým akumulátorem * Bubnové brzdy * 3 x 11 t BPW Eco nápravy * Parabolické pružiny * Mechanické vyrovnání náprav vzadu * Boční ochrana proti podjetí * Otočné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední uzavřené plastové blatníky a rovné zadní pozinkované ocelové kryty s ochranou proti odstřikování * Konturovací páska po stranách a vzadu, reflexní * Výklopné víko (žárově zinkované) na skříňku na nářadí v platformě podvozku * Multinapěťová instalace * LED zadní světla * Výstražné světlo (odnímatelné) vzadu * Tažná oj s okem 40 mm a nastavitelnou výškou pomocí tažné pružiny a napínáku * 15-pólová elektrická zásuvka * Po stranách vždy 4 kapsy na kolíky (bez kolíků), současně možnost zajištění nákladu * Balíček zajištění nákladu (La-Si) obsahuje: 2 oka (6,4 t) vpředu vlevo a vpravo na hlavním rámu platformy, 5 párů UVV otočných a sklopných vázacích ok, zatížitelných ve všech směrech a zapuštěných do vnějšího rámu – v rozích 13,4 t, jinak 10 t * 6 párů mechanických sklopných ramen pro celkovou šířku 3 m (ne ve zkosení vzadu) * Rozšiřovací desky uložené uprostřed ložné plochy * Odkládací plocha pro rameno bagru přes zadní nápravu až k zadnímu nosníku, délka cca 2 100 mm (2 páry vázacích ok 6,4 t po stranách odkládací plochy) * Mechanicky jednodílné nájezdové rampy s pružinovým mechanismem (cca 3 000 x 720 mm) * Mechanicky posuvné boční rampy * Ložná plocha nad otočnicí: cca 1 960 x 2 520 mm * Ložná výška nenaloženého vozu cca 1 070 mm Hodox Ipa Nepfx Aqlenl * Zadní ložná plocha: cca 6 500 x 2 520 mm * Ložná výška nenaloženého vozu cca 910 mm (včetně 860 mm nájezdového zkosení) * Podvozek, otočný rám, tažná oj a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové válce atd. lakované černou barvou * 235/75 R 17,5 dvoumontáž kol * Pohotovostní hmotnost 5 900 kg * --technicky možné celkové povolené zatížení 30 000 kg-- * Vozidlo je žárově zinkované * Nové vozidlo s tovární zárukou * Změny a meziprodej vyhrazeny * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets, front and rear * VA: closed plastic fenders; HA: straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye, height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t), front left & right on the main frame of the bogie platform; 5 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, flush-mounted in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear incline) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the excavator arm storage) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available from Egestorf Hsdpfx Aex Ipavsqljnl

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8500 mm Hnjdpjn Aw Hkefx Aqlol Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT Veľmi dobre udržiavaný tandemový valníkový príves Hsdpfoymuz Usx Aqljnl ZANDT Cargo * TAT B 110 * Valník * Spevnená drevená podlaha * Záťažové upevňovacie koľajnice * Dvojosý tandem * Široké pneumatiky * Nastaviteľné ťažné oje * Celková povolená hmotnosť 11 900 kg * Veľmi dobrý stav Možný protiúčet Financovanie od 3,99% Chyby a predaj vopred vyhradené! Údaje v tomto inzeráte sú nezáväzné a neslúžia ako garantované vlastnosti. Predávajúci nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné osobitne preveriť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celej SR na požiadanie Otváracie hodiny: pondelok až štvrtok od 9:00 - 17:00 h, piatok od 9:00 - 14:00 h a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady * tandem s 2 nápravami * široké pneumatiky * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Hnsdpeymuz Isfx Aqljl Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways Hsdpfxjl Th I As Aqljnl * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards Hjdpfxel Tik Nj Aqlsnl * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) Hjdpfsl Tphrsx Aqlonl * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg Hedpfol Th Nnjx Aqljnl * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: použitý, prvá registrácia: 06/2011, celková šírka: 25 500 mm,

Stav: použitý, maximálna hmotnosť nákladu: 10 960 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2024, ďalšia kontrola (TÜV): 03/2027, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Dĺžka ložnej plochy: 5 000 mm Šírka: 2 550 mm / Ložná šírka cca 2 500 mm Ložná výška: cca 1 100 mm Ďalšie informácie - Oceľ - Žiarovo zinkované Hodpfx Aoytma Ajqlsnl - Hliníkové nájazdové rampy - Úložný priestor na rampy - 500 mm bočnice, sklopné - Pružiny bočníc - Gigant nápravy - Pneumatiky 285/70R19,5 - Výškovo nastaviteľné oj - Podperná noha vpredu + vzadu - Plastová náradie skrinka - Nástup vpredu

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf Hodpfx Ajwb Rakeqlsnl

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame Hnsdpfx Aqjykx I Helol ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required Hnjdpoykx I Tjfx Aqljl * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning sign packages front & rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (mounted at rear) * Drawbar with 40 mm towing eye, height adjustable via tension spring & turnbuckle * 4 stake pockets per side (stakes not included) with integrated lashing options * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on main frame of bogie platform * 5 pairs UVV-certified swiveling and retractable lashing rings * Loadable in all directions and recessed into outer frame corners: 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not in rear taper) * Extension planks stored in a compartment under the loading area Hjdpfeq Dyv Isx Aqlsnl * Excavator arm rest over rear axle up to rear cross-member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings mounted on excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic ramp sideways shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to 140 l/min), dual-line hydraulics * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm sloped approach) * Loaded deck height approx. 860 mm +/- 30 mm compensating unit * Chassis, bogie, folding outriggers, drop-down rear supports, and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection Hnedpfotplwiox Aqlel * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle Hnjdpfx Ajxptn Roqljl * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) Hjdjtplwfopfx Aqljnl * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: použitý, najazdené kilometre: 1 100 km, typ prevodu: iný, farba: biely, celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 600 kg, maximálna hmotnosť nákladu: 25 400 kg, veľkosť pneumatiky: 425/65R22,5, prvá registrácia: 03/2016, zavesenie: vzduch, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), underrun protection, support legs Hjdpfji Rk Axox Aqljnl Superstructure: Liebherr concrete mixer type HTM 1004, approx. 10m³, 2x 10t BPW axles! Matching hydraulics for power take-off on the towing vehicle available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stav: použitý, pohotovostná hmotnosť: 2 910 kg, maximálna hmotnosť nákladu: 7 590 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2009, ďalšia kontrola (TÜV): 04/2025, dĺžka ložného priestoru: 4 500 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 450 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: modrá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden; steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, front support, rear support, swing tailgates. Hjdpfx Aqjv S H Sfolonl Body: Tandem 3-way tipper trailer with ramp recess; loading ramps available at an additional cost from €900.00 net. ACCESSORY SPECIFICATIONS WITHOUT WARRANTY; subject to change, prior sale, and errors excepted.