Príves s pracovnou plošinou

MÜLLER-MITTELTAL Tridem, 7mtr., Nachlauf- Lenkachse, Liftbar

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side Gedpfx Ager Dpz Ajrjub * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: použitý, pohotovostná hmotnosť: 2 510 kg, maximálna hmotnosť nákladu: 15 490 kg, celková hmotnosť: 18 000 kg, prvá registrácia: 02/2016, ďalšia kontrola (TÜV): 02/2017, zavesenie: vzduch, veľkosť pneumatiky: 385/65R22.5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/65R22.5, veľkosť zadnej pneumatiky: 385/65R22.5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Služby registrácie vozidiel, STK/SP/UVV, prevoz do prístavu Jazyky: nemčina, ruština, angličtina, arabčina Farba: sivá-čierna Výbavové extra ABS, otočný podvozok, tlaková vzduchová brzda, EBS, vzduchové odpruženie, cena na vyžiadanie (Mobile), kotúčové brzdy, odpruženie: vzduch, nosnosť (kg): 15490 Typ nadstavby: 5x štandardná lafeta, rok výroby náprav SAF 2016, stav: dobrý, pojazdný, uložené na seba. Gusdpfx Agsww D Dnsrob HSN/TSN: Zmena údajov vyhradená.

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: Gsdpfx Ajl Tihusgrsub * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*