Müller-Mitteltal 10T Tandem Anhänger*Edscha*Top-Zustand* kúpiť použité (13 382)

Stav: nový, maximálna hmotnosť nákladu: 18 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (tire pressure monitoring system) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact guard * Mechanical drop down rear supports ----Container / Low Loader Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roller containers * Steel floor with roller recesses in the bogie area * Suitable for container transport with lengths of 5,500 - 7,000 mm * Pneumatic 4-point twist-lock system, plus mechanical plug-in front corner stops in the running rails * Loading certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Eight removable skip stops for lateral centering of skips, front four skip stops plug-in with pivoting stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements to ensure positive and non-positive securing of skips * Four leaf-shaped lashing brackets on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp running rail area * 1 pair of Aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: Hnjdpfx Aepk D Iijqljl * Contour tape on sides & rear, reflective * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stav: nový, maximálna hmotnosť nákladu: 13 830 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, Rok výroby: 2026, * KA-TA-R 18 ----Brakes: Hnsdex Ipbyspfx Aqlsl * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping operations ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal (without truck-side installation) * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Drawbar Eye: * Drawbar with 50 mm flanged drawbar eye (adjustable by +77 mm and -33 mm using offset plate) ----General Attachments: * Landing gear at the front * Folding galvanized steel underrun protection for paver feeding * Enclosed individual plastic mudguards * Front wall platform made of grating with boarding step on the drawbar and hand grips on the front wall ----Chassis: * Chassis made of high-strength fine-grained steel ----Tipper Body: * Steel 3-way tipper body with asymmetrical continuous aluminum side walls (without central stanchion), pendulum-mounted with manual central locking, and side wall foldable on the left with drop side spring lifter * Rear wall – made of HBW 400 steel – pendulum-mounted by automatic 2-claw latch * 5 mm steel floor made of HBW 450 steel ----Load Securing: * Each side equipped with 4 x 3 t lashing rings – recessed and foldable – integrated into the steel floor ----Roll Cover: * Roll cover – agate grey similar to RAL 7038 * Cover tensioned using side tensioning ratchets and tensioning rubbers front and rear ----Paintwork: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tanks, landing gear, flanged drawbar eye painted black * Sideboard paintwork in a desired RAL color shade (excluding special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * New vehicle without first registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to special equipment) ----Delivery Time: * Available from calendar week 42/2026

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Inquiry number: 11652 * TPMS Tire Pressure Monitoring System * EBS brake system, drum brakes, BPW axle, parabolic springs * Front landing gear, spring-assisted square tube supports at the rear with baseplate; safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height adjustable) * 15-pin power connector * LED lighting * 315/80 R 22.5 tires, fully enclosed steel fenders * Swiveling cable drum mounting * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drums with 800-3,000 mm diameter x 1,700 mm width between drum arms * Equipped with tension lock for drum securing at the ends of the support arms and locking of the cable drum mount to the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe break protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. Hnsdpfxjy R Hx Us Aqljl * Also includes hydraulic pump unit with Hatz 1B30 Silent diesel engine and manual starter, 6.5 HP (150 bar), pressure supply optionally via truck hydraulics or pump unit by switching connections * Toolbox approx. 500 x 350 x 400 mm * Chassis with hot-dip galvanized drawbar * Advertising space integrated in side protection, external polyester coating in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing possible through our partners with or without down payment, residual value options, and various terms. Contact us for an offer! * We are official Müller Mitteltal dealer! * Example hire purchase through our partner FM LeasingPartner from just €595,- net/month over 60 months (no down payment, zero final payment). * Contact us for a quote! ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of business hours, appointments can be arranged * Wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stav: použitý, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2012, ďalšia kontrola (TÜV): 05/2028, Rok výroby: 2012, Interné číslo vozidla: G300402 Nemecké vozidlo Hnjdpfxexy Ul So Aqlsl Ihneď k dispozícii v našom areáli v Kaufungen - Kassel, Nemecko Viac INFO u Luis Lucena Rok výroby 2012 Prázdna hmotnosť návesu: 6 530 kg Miešač na betónový náves LIEBHERR 10 m³ Zmeny a omyly vyhradené Radi prijmeme vaše ojazdené vozidlo na protiúčet. Financovanie priamo u nás v spoločnosti možné. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 05/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic leaf springs * Front support winch, rear spring-assisted square tube supports with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, enclosed fenders made of steel sheet * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, graduated * For drum diameter 800–3,000 x (1,700 mm width between drum arms) * With locking system for drum securing at the carrier arm ends, as well as central claw lock securing the cable drum mount to the chassis * Motor-hydraulic pull and push cylinders with pipe rupture safety. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system plugs, hoses, and pipes in NW 13. * Drum drive motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. * Including power pack with hydraulic Hatz 1B30 silent diesel engine and hand starter, 6.5 HP (150 bar), power supply selectable via switching the connection lines between truck hydraulics or the power unit * Toolbox approx. 500 x 350 x 400 mm Hnjdpey Rb Tyjfx Aqlsl * Chassis with galvanized drawbar * Advertising surface integrated within the side guard, exterior polyester-coated in RAL white * ---- as-new condition (used only for 1 project) * ---- * Financing available through our partners, with or without down payment or residual value, and various terms possible. Request a quote from us! * We are Müller Mitteltal authorized dealers! * Example leasing offer from our partner FM LeasingPartner from as little as EUR 515/month net on a 72-month term (no down payment, zero residual value). * Request a quote from us! ---- * Our opening hours * Monday to Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside these hours, appointments are available upon request * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle français

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). Hsdpfx Aeyfu Sdjqlonl MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: použitý, maximálna hmotnosť nákladu: 13 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2008, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 850 mm, objem nakladacieho priestoru: 10 m³, celková šírka: 2 550 mm, celková výška: 2 580 mm, Rok výroby: 2008, Výbava: ABS, Müller-Mitteltal Three-Way Tipper 2-Axle Tandem Trailer VIN: 051973 Chassis / Attachments: * Air suspension * 2 x BPW Eco Plus axles with drum brakes Hnsdpjy H Tryefx Aqljl * Tyres: 385/65 R 22.5 * Remaining tread depth: Front approx. 20/80%, Rear approx. 30/80% * Fixed underride guard * Drawbar with 50 mm eye * 1 x Jost support leg on the drawbar Body: * Müller-Mitteltal three-way tipper body * 850 mm aluminium side walls * Front wall and tailgate 960 mm * Approx. 10 m³ * Pallet width Weights: * Gross weight: 18,000 kg * Payload: 13,900 kg * Unladen weight: 4,100 kg Miscellaneous: * German registration * SP 03 / 2027 * 1 previous owner New main inspections / safety inspections or weight reductions/increases are available on request. We are also happy to assist you in obtaining export/transfer license plates, and transporting your purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for misprints & typographical errors, subject to alterations, interim sale and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the marketing of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to guide them through the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arrangement of special transports We are happy to assist you with the arrangement of special transports. Day registration/export plates We are happy to help you obtain export/temporary plates. Handling customs formalities We are happy to assist you with customs matters.

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ---- Braking system: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Hedpjvin T Sofx Aqlonl ---- Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ---- Drawbar / Flange drawbar eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into underrun protection ---- General attachments: * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards ---- Tipping body: * 3-way tipper body made of fine-grained steel for pallets, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed smooth steel front wall * Hard wood plate for excavator bucket mounted on the front wall * Continuous side walls – without centre posts – foldable with spring-assisted side boards, and pendulum system via manual central locking * Rear stanchions bolted * Combined steel double wing rear doors, asymmetrically split, swingable up to 270° and lockable, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary bar lock and central locking, deactivation function for automatic tailgate opening when tipping in reverse with open wing door * 4 mm steel floor plate * Two-step access at front left * Mounting rail at the rear for loading ramps ---- Load securing: * One 7 t lashing point at each corner * Four 3 t lashing points recessed into the side outer frame on each side ---- Loading ramps: * Recessed mounting compartment for loading ramps at the rear of the chassis * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ---- Painting: * Chassis, drawbar, rear stanchions, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanized * Side wall colour can be selected in any desired RAL shade (no special or metallic paint); modifiable up to approx. 6 weeks before completion * Axles, air tanks, flange drawbar eye, front landing gear painted in black ---- Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 45 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ----Braking System: Hjdpfx Aevin Ucjqlenl * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lift and lower function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with force-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing leg at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel drop-side three-way tipper body made of fine-grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet steel * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls — foldable without centre stanchion — with side panel spring lifts and pivoting via manual central locking * Bolt-on rear stanchions * Combination steel wing doors at the rear — 2-leaf, asymmetrically divided — swingable and lockable up to 270°, non-foldable — with additional pendulum frame for automatic rear door opening during tipping; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic rear door opening when tipping backwards with open wing door * 4 mm steel floor plate * Two-step access on the front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * On each side, 4 x 3 t lashing rings integrated into the outer frame ----Loading Ramps: * Recessed ramp chamber at the rear of the chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper body, underrun protection, and rear support legs hot-dip galvanized * Side panels painted in a desired RAL colour (excluding special or metallic paints); changeable up to approx. 6 weeks before completion * Axles, air tanks, flange towing eye, and front landing leg painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 10/2013, celková šírka: 2 750 mm, Rok výroby: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic lowdeck | 48 t permissible gross weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy build and reliability. Technical specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible gross weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible point load: 18,000 kg Load deck: Low deck (low loader specification) Loading ramps: hydraulically operated Low bed: hydraulically adjustable (up/down) Tyres: in good condition Construction: all-steel chassis Max speed: 80 km/h Features & Options: Heavy-duty low loader version Hydraulically height-adjustable low deck Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Hnedpfey I Si Tjx Aqlol Robust construction, ready for immediate use Condition: The trailer is pre-owned but fully functional and shows age and use-related wear marks. Technically a robust and reliable equipment transporter. Ready for immediate use – ideal for transport and construction companies. For further information or to arrange a viewing, please contact us. = Further Information = Axle configuration Rear axle 1: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 2: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 3: Twin wheels; Max axle load: 10,000 kg; Steered Weights Unladen weight: 14,500 kg Payload: 33,500 kg Gross vehicle weight: 48,000 kg Maintenance, history, and condition APK (MOT/Technical inspection): valid until 02.2027 Technical condition: very good Visual condition: very good Financial information Price: On request Further information Please contact Klaas Gerrits or Henk Gerrits for more information.

Stav: použitý, maximálna hmotnosť nákladu: 13 830 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2020, ďalšia kontrola (TÜV): 11/2026, Výbava: ABS, Nemecké vozidlo od prvého majiteľa nehodové Bočné steny z hliníka SAF nápravy Bubnové brzdy Hnjdjy Haz Uepfx Aqlel zachovalý stav prenájom, kúpa, lízing s opciou na kúpu prenájom s plným servisom od 590 eur mesačne bez DPH (ceny prenájmu odstupňované podľa dĺžky zmluvy) všetky informácie na Príklad lízingu s opciou na kúpu: 479 eur mesačne bez DPH pri trvaní 36 mesiacov, jednorazová zálohová platba 5 000 eur bez DPH a záverečná splátka 2 000 eur bez DPH. Všetky ceny sú uvedené bez DPH a podliehajú kladnému posúdeniu bonity.

Stav: použitý, pohotovostná hmotnosť: 3 110 kg, maximálna hmotnosť nákladu: 9 490 kg, celková hmotnosť: 12 600 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2016, ďalšia kontrola (TÜV): 02/2025, dĺžka ložného priestoru: 4 550 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19.5, farba: modrá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, oceľová nadstavba, 2 nápravy, ojový príves, listové pruženie, ABS (protiblokovací systém), upevňovacie oká, odkladacia schránka, výkyvné dvere Nadstavba: 2-nápravový trojstranný sklápací príves s gigantovými nápravami, bubnové brzdy, rám žiarovo zinkovaný! Nakladacia výška cca 1290 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas medziobdobia a chyby vyhradené! Hnodpfowth Iijx Aqlel

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2010, 3-nápravový nízkozdvižný príves, prejazdný zozadu. Povolená celková hmotnosť 30 000 kg, užitočné zaťaženie 22 700 kg. Nakladacia plocha 8 900 mm (7 000 + 1 900) x 2 550 mm, výstražný balík pre nadrozmer, 12 kotviacich ôk a 8 vreciek na stĺpiky s možnosťou súčasného kotvenia, 6 prepraviek na náradie. Dvojdielne hydraulické rampy cca 2 100 + 2 000 x 800 mm s gumovým povrchom, hydraulická zadná podpera. Nápravy BPW, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75 R 17.5. Kovaný oje, otočné ťažné oko 40+50 mm. 2-vedenie pneumatík (duomatic), 2-vedenie hydrauliky, 24 voltov. Výška nakladania prázdneho prívesu cca 910 mm. Oranžový náter. STK platná do 03-2027. = Ďalšie informácie = Rozmer pneumatiky: 235-75R17.5 Pruženie: parabolické Hnedpfx Ajy Evvlsqlol Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 22 700 kg Celková hmotnosť: 30 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá Hsdpfx Aqor Dpzxjlsnl * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers Hjdpfxeykx Nke Aqlsnl * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection Hnjdpfjykx Nqex Aqlol * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles Hnedpfx Aqer Dpz Aelsl * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel Hodpfx Aqsyvxg Uoljnl * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French * WhatsApp

Stav: použitý, pohotovostná hmotnosť: 2 700 kg, maximálna hmotnosť nákladu: 7 300 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2006, dĺžka ložného priestoru: 4 500 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 000 mm, zavesenie: oceľ, veľkosť pneumatiky: 245/70R19.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing eyes, underrun protection, front support, pendulum tailgates Hnjdpfoytxx Rox Aqlel Body: 3-way tipper trailer, steel side walls, swinging and foldable, 2x BPW axles, drum brakes! Loading height approx. 1040 mm. Side walls foldable at top and bottom! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = Hjdpfx Aoxt Rw Rjqlsnl - EBS = Ďalšie informácie = Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.658

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30.0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Infotool am Anhänger, inkl. Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelsätze vorn und hinten * Vorderachse mit geschlossenen Kunststoffkotflügeln, Hinterachse mit geraden, feuerverzinkten Stahlblechschürzen, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestellplattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumkennleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkeransteuerung * Zugstange mit 40 mm Zugöse sowie Höhenverstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeige im LKW über EBS-Signal (keine LKW-seitige Installation notwendig) * Gummiauflage auf den Klapprampen sowie an der Auffahrschräge links und rechts (ca. 860 mm lang) * Gummibelag auf den Längsträgern vom Stirn- bis Abschlussquerträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Jeweils 4 Rungentaschen pro Seite, kombinierbar mit 2 t Zurrmöglichkeit * LaSi-Paket bestehend aus: 5 Paar UVV-Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar, im Außenrahmen eingelassen – in den Ecken 13,4 t, sonst 10 t Hnjdpfx Aqjq Dyvcolol * 6 Paar mechanische Klappausleger für 3 m Gesamtladebreite (nicht an der Heckschräge) * Bohlenhalterung unter der Ladefläche, längsseitig * Walzenanschlag vor dem Stirnträger, hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer seitlicher Rampenverschub * Heckabstützung hydraulisch (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei Pumpenleistung LKW > 40 l/min bis max. 140 l/min) * Spritzwassergeschützter Hydraulik-Steuerblock * Zweileitungshydraulik * Ladefläche über Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm (Luftfederung) * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen & Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugstange, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Verfügbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30,0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Informations-Tool am Anhänger, mit Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelpakete vorne und hinten * VA (Edelstahl) geschlossene Kunststoff-Kotflügel vorne sowie verzinkte, gerade Stahlblechschürzen hinten, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestell-Plattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkansteuerung * Zugschere mit 40 mm Zugöse und Höheneinstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeigeoption im LKW über EBS-Signal (ohne separate LKW-Installation) * Gummibelag auf den Klapprampen sowie auf den Auffahrschrägen links und rechts (je ca. 860 mm lang) * Gummibelag auf Längsträgern vom Stirn- bis Abschlussträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Je Seite 4 Rungentaschen mit gleichzeitiger 2 t Zurrmöglichkeit * Ladungssicherungspaket bestehend aus: 5 Paar UVV-zertifizierte Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar und im Außenrahmen eingelassen – an den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtbreite (nicht in der Heckschräge) * Bohlenhalter unter der Ladefläche, längs verbaut * Walzenanschlag vor dem Stirnträger hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer Seitenverschub der Rampen * Hintere hydraulische Abstützung (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei hydraulischer Pumpenleistung des LKW von über 40 bis max. 140 l/min) * Hydrauliksteuerblock spritzwassergeschützt * Zweileitungshydraulik * Ladefläche über dem Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm durch Luftfederung * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen und Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugschere, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Hersteller-Gewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Lieferbar ab KW 20/2026 Hsdpfstplv Nox Aqlsnl

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2008, GOWORIM PO RUSSKI - Yuriy mob.: 4-nápravový nízkozdvižný príves, prejazdný. Povolená celková hmotnosť 40 000 kg, užitočná hmotnosť 31 820 kg. Nakladacia plocha cca 9 800 mm (2 400+7 400 mm) x 2 550 mm, sklopné rozšírenia na 3 000 mm, výstražný balík pre nadmernú šírku, výstražné majáky, odkladacia plocha pre rameno bagra, výška nakladania cca 900 mm. 12 upevňovacích ôk, 12 kotviacich strmeňov v vonkajšom ráme. Hydraulické rampy cca 3 000 x 650 mm. Nápravy SAF, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75R17.5. Náradie v skrinke. Zadné hydraulické podpery. Ťažné očko 50 mm. 2-okruhová hydraulika, 2-okruhové vzduchové vedenie (Duomatik), 24 voltov. Lakovanie žlté. Predaj v aktuálnom stave. Hsdpjuuxg Njfx Aqlonl = Ďalšie informácie = Rozmer pneumatík: 235-75R17.5 Pruženie: parabolické pružiny Služobná hmotnosť: 8 180 kg Užitočná hmotnosť: 31 820 kg Celková povolená hmotnosť: 40 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit Hnjdepk Dyxepfx Aqlol ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external folding supports at the rear * Enclosed single plastic mudguards * Folding A-sign at the rear * Plastic underrun protection buffer * Hot-dip galvanized impact protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings on each side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame * Equalizing chain with eye and quick shortener, both sides, special Y version, 6.3 t ----Skip Stops: * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum-type stop, can be fixed in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black tone ----Information: * Lashing force with load securing certificate * Subject to prior sale and errors * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: Hjdol Thyqepfx Aqlsnl * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop-down stabilisers at the rear * Closed individual plastic mudguards * Foldable rear A-plate * Plastic underrun protection buffers * Hot-dip galvanized front impact guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum stop, insertable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf