Nízkozdvižný príves

MÜLLER-MITTELTAL T3 Tiefl., Luft., Schwarzdeckentransporte

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift Gedpsq Dyvcofx Abksui * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, Výbava: sadzový filter, - Klimatizácia - 3x lyžice - Powertilt - Výborný stav Gusdpfx Asvdpn Tjbkji Odpruženie: Hydraulické

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od 1. majiteľa Trojosový nízkozdvižný príves s nájazdovou rampou Godpfx Aon Aw Hkebksui Nízkozdvižný príves s najazdovou rampou Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8 500 mm Šírka 2 500 mm Vzduchové odpruženie Netto cena pre firmy/export – 19 990 € Zmeny, predaj a chyby vyhradené ===== Telefón2 Mobil =====

Stav: nový, výkon: 294 kW (399,73 k), typ paliva: nafta, konfigurácia náprav: 6x6, veľkosť pneumatiky: 315/80R22.5, palivo: nafta, rázvor náprav: 20 240 mm, kabína vodiča: denná kabína, typ prevodu: automatický, emisná trieda: euro2, zavesenie: oceľ, Výbava: klimatizácia, pohon všetkých kolies, = Ďalšie možnosti a výbava = - Listové odpruženie = Poznámky = Modelový rok: 2024 = Informácie o firme = Van Vliet Automotive Trading - Váš partner pre nákladné vozidlá Gujdpfx Abjvpqcijkji Široká ponuka nových nákladných automobilov, prívesov, 4x4 vozidiel a strojov. Ihneď pripravené na použitie! Vlastné (konštrukčné) dielne, centrum úprav a lakovňa vám zaručia rýchlu a projektovo orientovanú realizáciu objednávky kdekoľvek na svete. ISO a AEO certifikované. Logistické služby a colno-exportné zariadenia. Celosvetové služby náhradných dielov. Medzinárodný tím mechanikov a školiteľov poskytuje technickú podporu a školenia priamo na mieste po celom svete. Kontaktujte náš skúsený, viacjazyčný tím zákazníckej podpory pre profesionálne, projektovo špecifické a konkurencieschopné poradenstvo. = Ďalšie informácie = Prevodovka: TipMatic 12.28OD, automatická Modelový rok: 2024 Rozmer pneumatík: 315/80R22.5 Odpruženie: listové odpruženie = Informácie o firme = WE PROVIDE, YOU ACCELERATE Bez hraníc Van Vliet je oficiálnym importérom značky MAN Truck & Bus SE pre viaceré africké krajiny. Podporené dôkladnými popredajnými službami, ako je dodávka náhradných dielov a realizácia (lokálnych) školení.

Stav: použitý, Funkcionalita: plne funkčný, najazdené kilometre: 193 000 km, výkon: 130 kW (176,75 k), typ prevodu: poloautomatický, typ paliva: nafta, farba: oranžová, celková hmotnosť: 12 500 kg, pohotovostná hmotnosť: 7 000 kg, počet sedadiel: 2, prvá registrácia: 06/2002, ďalšia kontrola (TÜV): 10/2025, Rok výroby: 2002, Výbava: ABS, kabína, klimatizácia, pohon všetkých kolies, prípojné zariadenie, tempomat, uzávierka diferenciálu, ďalšie svetlomety, štandardná lopata, Predávame náš Unimog U 400 vrátane zimnej výbavy (3 m radlica a sypač soli s soľankou). Palivo: nafta Farba: oranžová Prvá registrácia: 18.06.2002 Dodatočný výmenník tepla vzadu TÜV/SP vykonáme nanovo my Každý rok v októbri bol Unimog v servise. Všetky chybné diely boli vymenené, vykonaná údržba a kontrola TÜV. Gsdpfx Ajwtnnisbksui

Stav: nový, číslo stroja/vozidla: 2dff0c136c85096f36822a0bb, pohotovostná hmotnosť: 7 150 kg, maximálna hmotnosť nákladu: 16 850 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball-bearing slewing ring, storage box recessed in turntable front section Foldable rear support 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extendable widenings to 3,000 mm (not included in rear slope) (The track width of the construction machines or vehicles to be transported may not exceed the external frame width of 2,550 mm) Storage compartment for timber planks located centrally on the loading platform 70 mm timber planks for width extension to 3,000 mm Tie-down lashing eyes low loader 3 pairs of lashing points, each rated to 10 t, integrated in the floor at the front 6 pairs of lashing mushrooms, flush-mounted in the outer frame, top and side, each rated to 10 t 1x in the neck area remaining distributed in-between, distance not greater than 1,200 mm 1x rear slope 5 pairs of stake pockets, flush-mounted in outer frame, internal dimensions 70 x 40 mm (convertible to 5 t. ring lashing eyes, not included) Trailer coupling equipment Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Brake System 2-line compressed air brake system Colour-coded lines for easy service Spring-loaded parking brake included 2 non-interchangeable coupling heads at the front with connection lines to tractor unit ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lamps at rear 2 x 7-pin non-interchangeable plugs at front with connecting cable 1 LED rotating beacon with holder, switched by parking light (removable beacon) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Front section with steel floor then 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-bed loading area incl. rear slope: 8,200 mm Access Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable boarded with timber included with spring lift assistance Operating Instructions An exemption is required for 10,000 kg axle load, only indivisible loads permitted! The stated gross weight is technically feasible; depending on the cargo, the permissible gross weight may not be achievable due to axle/saddle/kingpin load restrictions. (Poor towing or trailing characteristics due to incorrect load distribution may result) Registration/Country Plates Country of registration: Germany With TÜV (Dekra) inspection and appraisal (according to §13 EC-FGV) 24/7 Service Hotline Prepared for two-row number plate holder Conspicuity marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau 10 years warranty against corrosion-through Drawbar galvanized or black, manufacturer’s choice Access ramps hot-dip galvanized Attention: Archive images! Gjdpfx Aei Riy Ejbkjui

Stav: použitý, najazdené kilometre: 1 km, prvá registrácia: 01/1997, Výrobca: Schmidt Nido Typ: SNK -s dalšia výbava: Gedpfxovvqnlj Abksui - osvetlenie - skladovací stojan - 12V hydraulická jednotka

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin electrical plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * Four stake pockets on each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, swiveling and retractable Guodpfjq Dyv Iex Abkei * Loadable in all directions and recessed into the corners of the outer frame: 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Widening planks stored in a compartment under the loading area * Dipper stick support above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted on the sides of the dipper stick support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically adjustable ramp tip and load holding valves, hydraulically adjustable side shift * Hydraulic flow divider in trailer (for hydraulic pump output in truck over 40 l up to max. 140 l/min), dual line hydraulic system * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loaded platform height approx. 860 mm +/- 30 mm via equalization unit * Chassis, bogie, folding outriggers, drop-down supports at rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc. painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 03/2026