Faymonville Stbz-3Vau + Dolly kúpiť použité (278)

Stav: použitý, číslo stroja/vozidla: ***YAMT13XX6K0104043, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, celková dĺžka: 13 800 mm, celková šírka: 2 550 mm, celková výška: 3 410 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: iný, Rok výroby: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inch Height of kingpin / drawbar: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading floor length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low loader: ✓ Maximum width: 300 cm (25 cm per side) Maximum length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Additional information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Left outer tire tread: 60%; Right outer tire tread: 60% Axle 2: Twin tires; Left outer tire tread: 20%; Right outer tire tread: 30% Axle 3: Twin tires; Steering; Left outer tire tread: 55%; Right outer tire tread: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Dodpfxeu H D R Es Am Sout Functional Body manufacturer: Faymonville Loading platform height: 87 cm Identification Registration number: C505325 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer Duedpfx Aoiu Etksm Sjt - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Dodpeikyh Hefx Am Ssut Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem Duedpfx Amjiuy Nls Set - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer Duedpfei Dwlwsx Am Sot - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: použitý, konfigurácia náprav: 3 nápravy, farba: sivý, Rok výroby: 2005, Hrubá hmotnosť: 12.130 kg Užitočné zaťaženie: 21.870 kg Dedsydbd Djpfx Am Sout CELKOVÁ HMOTNOSŤ: 34.000 kg

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system Duedpfjya E A Nex Am Set - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Dodpfx Asiu Etrjm Sjut Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve Duedpfouqlmnex Am Set - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Djdpjvy Edcefx Am Sjut Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function Dusdjt Ag Uwspfx Am Sst - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° Duedok Af Svepfx Am Sst - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: Dodpfx Amomfqi Ie Sout One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm Duodounrapspfx Am Sjt - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: použitý, maximálna hmotnosť nákladu: 40 800 kg, celková hmotnosť: 53 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2012, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Faymonville Multimax STN-4AX, 4-nápravový teleskopický podvalník Rok výroby: 11.2012 Prevádzková hmotnosť: 13 000 kg Celková hmotnosť: 53 800 kg Technicky možné: 55 400 kg Užitočné zaťaženie: 40 800 kg Zaťaženie na oji: 25 000 kg Pneumatiky: 205.65R17,5 3. a 4. náprava riadená nútene 4x SAF nápravy 7 600 kg s vzduchovým odpružením Dĺžka: 13 475 mm až 20 275 mm (výsuvná) Šírka: 2 540 mm až 2 620 mm Výška: 1 200 mm ! Ďalšie informácie na požiadanie e-mailom ! Dedpfxsu Aynlo Am Seut Údaje sú nezáväzné, možnosti omylu vyhradené! Údaje uvedené na internete predstavujú nezáväzný popis a neznamenajú garantované vlastnosti. Predávajúci nezodpovedá za chyby, preklepy ani chyby v prenose dát. Zmeny vyhradené. Stály nákup a predaj, ako aj protiúčet a prenájom žeriavov a zdvíhacích vozidiel a tiež stavebných strojov a ťažkotonážnych vozidiel.

Stav: nový, maximálna hmotnosť nákladu: 33 750 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete inventory of vehicles that are available for immediate and short-term delivery on our website. Excerpt from the equipment specification. Complete equipment details upon request. Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg For tractors: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with externally mounted, extendable beams in "SUPER LOW" design, approx. 6,850 mm long - Low bed with fixed hardwood flooring (approx. 40 mm thick) and mechanical locking - Supply lines routed protected within the extendable beams, automatically adjusting to the respective low bed length - 5 pairs of foldable lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Duedpfx Ajxbmn Uom Set Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator trough, approx. 1,250/700 x 505 mm, rear open - 2 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings in the trough, LC 16,000 daN - 1 pair of horizontal lashing rings in the trough, LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame Pendel-axle: - Pendel-axle, all axles hydro-mechanically forced-steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and guide pin for securing in the raised position - Final coating of axles with 2 layers of 2-component paint, single color in FAY-Grey-34-0260 - Technical axle load: each 12,000 kg, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front wiring rail with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: - Complete steel construction automatically blast-cleaned with shot blast system after welding - Second blasting with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection - Final coating with 2 layers of 2-component top coat, single color RAL 3002 carmine red according to the RAL 841GL system Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Steering control at the front and rear via cable remote control (pushbutton operated), including axle single-track monitoring (without installation in the tractor unit) - Electro-hydraulic power pack - 2 pairs of bolted container locks on the outer beams. Includes 2 pairs of container locks for 1x 20' or 1x 40' container - On the gooseneck, removable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvaniz

Stav: použitý, maximálna hmotnosť nákladu: 39 780 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2023, ďalšia kontrola (TÜV): 01/2027, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park so vozidlami dostupnými ihneď a v krátkodobom horizonte nájdete na našej webovej stránke. Výňatok z výbavy. Kompletná výbava na vyžiadanie. Husí krk: * Husí krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry uchytávacích krúžkov (LC 5 000 daN) * Krytina z tvrdého dreva cca 30 mm hrubá Nakladacia plocha: * Nakladacia plocha vo výsuvnom prevedení * 5 párov uchytávacích krúžkov sklápateľných smerom von (LC 5 000 daN) * 3 páry uchytávacích krúžkov sklápateľných smerom von (LC 10 000 daN) * 1 pár uchytávacích krúžkov ležato vpredu v nakladacej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme nakladacej plochy pre zavesenie upínacích pásov (LC 2 000 daN) * Krytina z tvrdého dreva cca 48 mm hrubá, nad nápravami hliníkový slzičkový plech Oporné nohy: * JOST oporné nohy (mechanické) s dvojrýchlostnou prevodovkou pre zdvih 24 t (testovacia záťaž 50 t) Pneumatiky: * Pneumatiky 205/65 R 17.5 zdvojené kolesá Nápravy: * BPW nápravy, dve pevné nápravy, dve nápravky riadené, vzduchom odpružené, s bubnovými brzdami a funkciou zdvih/zníženie * Riadené nápravy s elektromagnetickým blokovaním spätného chodu, aktivovaným spätným chodom alebo manuálne Brzdová sústava: * Brzdový systém podľa predpisov EÚ s EBS-E (4S3M) bez spojovacích vedení k ťažnému vozidlu Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Triedy ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lak: * Prvotriedna a dlhotrvajúca antikorózna ochrana štandardne tryskaného zváraného rámu zabezpečená dvojzložkovou (2K) základnou farbou s obsahom zinku * Kvalitný dvojzložkový (2K) vrchný lak v jednom farebnom odtieni v RAL 3002 karminovo červená * Zadná časť metalizovaná a nalakovaná v RAL 9010 (čisto biela) * Disky kolies v striebornej Elektrická sústava: * Elektrická výbava podľa predpisov EÚ Osvetlenie: * 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na pripájacej lište vpredu so zásuvkami 24N, 24S & 15-pólová zásuvka podľa ISO. 24N ISO-1185 24S ISO-3731 15-pól ISO-12098 Zahrnuté príslušenstvo: * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena cca 400 mm vysoká * Držiak rezervného kolesa pred prednou stenou * Na pozinkovanej pripájacej lište vpredu žlto-červené vzduchové spojky * 4 kusy klinov s držiakom na prednej stene * Zásuvka v zadnej časti husieho krku pre hliníkové nájazdové rampy * Pozinkované sklopné podpery pod skosením nakladacej plochy * Držiak pre výstražný maják na zadnej časti návesu Duodox Uvlropfx Am Sst * Žltá reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu na návesu * Na husom krku a zadnej časti vľavo a vpravo držiak na výstražné tabule so zásuvkou * Blatník na zadnej časti návesu * Návod na obsluhu a popis na USB kľúči * Európske reflexné štítky (červeno-žlté) na zadnej časti návesu * Nálepky s maximálnou rýchlosťou 80 km/h vzadu a na oboch stranách * Akustický výstražný signál pri cúvaní * Meradlo zaťaženia na stanovenie zaťaženia náprav vrátane diagramu zaťaženia

Stav: použitý, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2017, * Nápravy SAF * Kolískové vaničky * Hydraulické nakladacie rampy nastaviteľné na šírku Duodpfowta Alsx Am Set * Vzduchové odpruženie * Rozšíriteľný * Pohotovostná hmotnosť: 11 020 kg -----Interné číslo vozidla: 11010----Zmena a predaj počas inzerovania vyhradený. Podpora cez WhatsApp k dispozícii! V prípade otázok k vozidlu alebo ďalších informácií nás neváhajte kontaktovať cez WhatsApp. WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Dujdpfx Aetvfkfom Sjt Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2016, zavesenie: vzduch, Rok výroby: 2016, Výbava: zdvíhacie čelo, Odpruženie: vzduchové odpruženie Zadná náprava 1: riadená Zadná náprava 2: riadená Zadná náprava 3: riadená Celková hmotnosť: 48 000 kg Technický stav: veľmi dobrý Duedpfx Aovvwzrom Sst Vizuálny stav: veľmi dobrý Cena: na vyžiadanie Pre viac informácií kontaktujte Davida F. Middelmana.

Stav: použitý, maximálna hmotnosť nákladu: 36 650 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2021, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Excerpt of Equipment Load Area: Load area in extendable version with pneumatically operated locking mechanism. 2 pairs of recessed lashing rings (LC 5,000 daN). 1 pair of lashing rings in the gooseneck (LC 10,000 daN). 6 pairs of outward folding lashing rings (LC 5,000 daN). 3 pairs of outward folding lashing rings (LC 10,000 daN). Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Landing Gear: JOST mechanical landing gear with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: 245/70 R 17.5 tyres – brand at our discretion. Load index (146/146F) Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tools. Brake System: Brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Steel Structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Premium and durable corrosion protection of the standard shot-blasted welding frame is guaranteed by a two-component (2K) zinc dust primer. High-quality two-component (2K) top coat, single-coloured in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. Metallic paint not available. Electrical System: Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Signs: At the gooseneck and rear section, left and right, each with a mounting bracket for warning signs including socket. Includes the following optional equipment: - Remote steering from front and rear via cable remote control with push button operation; single-track axle alignment (installation in tractor unit not required) - Electro-hydraulic power unit (± 45kg) - 4 wheel chocks with holders on the front wall (± 5kg) - 2" king pin - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg) - Yellow-red air couplings on the galvanized front connection rail - Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - Load area with heavy-duty hardwood floor - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm in the outer frame of the load area (± 27kg) - Galvanized extendable widenings, extendable by approx. 230 mm per side (± 230kg) - Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with plug connection (NATO-NATO) - Galvanized supports under the inclined section of the loading area - On the central beam, a painted sand coating for anti-slip protection - 6 pairs of WADER container locks in the loading area for 1x20' container, 2x20' containers or 1x40' container; in the extension an additional locking point for a 45' container is provided (± 90kg) - 4 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm (± 145kg) Dsdpjx Epznjfx Am Seut

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) Dusdsrgzv Nspfx Am Sjt * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Dujdpfx Amsv Sw E Aj Set Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: nový, maximálna hmotnosť nákladu: 73 540 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable, length approx. 3,650 mm * 2 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the gooseneck center section (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front running gear: Dujdpfx Asxbmplom Sot * Hook coupling front and rear, length: approx. 2,200 mm * Running gear width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Main beam height: approx. 400 mm * Main beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear running gear: * Mechanical pin-lug coupling for front attachment of a lowbed * Rear cross member; running gear width: approx. 2,850 mm * Running gear length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front running gear: 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear running gear tyres: 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Full steel construction is automatically shot-blasted with a turbine machine after welding. Second sandblasting with corundum for optimal coating adhesion * HRM-metallized chassis using ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final coating with 2 layers 2K topcoat, solid colour RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable aluminium side and rear walls on gooseneck, approx. 400 mm high, anodized finish * 3.5 inch king pin * Truck hydraulic connection with flow controller (20 l/min) * Overhead bar for supply line suspension, tractor unit tank must be at least 80 l * With MAX Trailer coupling adapters; otherwise, adapters to be supplied ex works by customer * BEKA-MAX central lubrication for gooseneck, NLGI-2 standard grease * Tool kit, Art. No. 612452 * Multi-coupling hydraulic connectors on gooseneck * Front running gear with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle running gear, NLGI-2 standard grease * One 7-pin socket left and right on the rear front running gear for warning panels * Threaded insertion points (ø approx. 40 mm) every 500 mm on the outer upper belt of the excavator deck tube for bolted rings (LC 16,000 daN) * Folding extensions with steel inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle running gear, NLGI-2 standard grease * Socket at rear running gear for cable remote control of steering * Rear running gear with trough * Two INOX tool boxes, approx. 855 x 340 x 390 mm, fitted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Controls power pack, start/stop diesel engine * Controls steering, in addition to the cable remote control * One LED work light left and right on the rear panel of the gooseneck with separ...

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK Dsdpfjxtc Uhox Am Ssut • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...