Müller Mitteltal Etue-Ta 18,0 18 T Gg Tandemtieflader kúpiť použité (59 911)

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake actuators * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning board packages at the front and rear Lhsdpfx Afjl Thxdo Tsf * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel side skirts, each with spray protection * Reflective contour tape laterally and at the rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), also suitable for lashing * Load securing (LaSi) package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for 3 m total width (not at the rear bevel) * Widening boards stored in the center of the loading area * Excavator arm rest above rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally on the excavator arm rest) * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm) * 4-function control block for subsequent retrofitting of hydraulic ramp shifting system * Mechanical lateral ramp shifting * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm access slope) * Chassis, bogie, drawbar, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Permissible gross weight technically possible: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Available from week 18/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear Lsdpfx Aotplwfef Tohf * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ monitorovanie tlaku v pneumatikách * Núdzové odistenie pre pružinové valce * Bubnové brzdy * 3x 11 t BPW Eco nápravy * Parabolické pružiny * Mechanické vyrovnávanie náprav vzadu * Bočný ochranný zábradľový systém proti podbehnutiu * Zadné výklopné podpery na ráme podvozka * Mechanicky nastaviteľné výstražné tabule vpredu a vzadu * Predné uzavreté plastové blatníky a zadné rovné pozinkované oceľové kryty, všetky so zásterkami proti špliechaniu * Reflexné kontúrové pásky po bokoch a vzadu * Výklopné veko (žiarovo pozinkované) pre schránku na náradie na točni * Multivoltážny systém * LED koncové svetlá * Odnímateľné výstražné majáky vzadu * Ťažná páka s 40 mm ťažným okom a nastavením výšky cez ťažnú pružinu a napínacie skrutky * 15-pólová elektrická zásuvka * Bočne po 4 vrecká na kolíky (bez kolíkov) s možnosťou upevnenia nákladu * Balík na zabezpečenie nákladu obsahuje: 2 upevňovacie oká (6,4 t) vpredu vľavo a vpravo na hlavnom ráme točnej plošiny, 5 párov UVV upínacích očiek, ktoré sú otočné a sklopné, zaťažené všetkými smermi a zapustené v vonkajšom ráme – v rohoch 13,4 t, inak 10 t * 6 párov mechanických sklopných výložníkov pre celkovú šírku 3 m (nevzťahuje sa na zadný zúžený roh) * Rozširovacie dosky uložené v strede ložnej plochy * Odkladacia plocha na bagrové rameno cez zadnú nápravu až po koncový nosník, cca 2 100 mm dlhá (2 páry 6,4 t upevňovacích očiek bočne) * Hydraulické jednodielne nájazdové rampy (cca 3 000 x 720 mm) * 4-cestný rozvádzač pre neskoršiu montáž hydraulického posuvu rámp Lodpfx Ael Th Adof Tohf * Mechanický bočný posuv rámp * Ložná plocha nad točňou: cca 1 960 x 2 520 mm * Výška plošiny nezaťažená cca 1 070 mm * Zadná ložná plocha: cca 6 500 x 2 520 mm * Výška plošiny nezaťažená cca 910 mm (vrátane 860 mm nábehového sklonu) * Podvozok, točňa, ťažná páka a nájazdové rampy žiarovo pozinkované * Nápravy, pružiny, vzduchové nádrže a ostatné lakované čiernou farbou * 235/75 R 17,5 dvojmontáž * 5 900 kg pohotovostná hmotnosť * --technicky prípustná celková hmotnosť 30 000 kg-- * Vozidlo je žiarovo pozinkované * Nové vozidlo s továrenskou zárukou výrobcu * Zmeny, chyby a medzipredaj vyhradené * Dodanie od 18. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Flatbed | Trailer Now available immediately Inquiry No.: 27678 Delivery to your address possible * We are happy to provide you with an individual offer * * Gross weight: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m flatbed with galvanized front wall 400mm * Excavator bucket storage made of hardwood, bolted to front wall * Unloaded deck height 930mm / loaded 870mm * One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifter with upright, adjustable springs for easy single-person operation * 4 UVV drop-lashing rings (LC 6300 daN) * Perforated outer frame (45° angled with perforation pattern for lashing points, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm. Optional installation of drop-lashing rings LC 3000 daN at approx. 600 mm distance possible), close-spaced cross-profiling, high-ribbed front and rear sections, rear drive-on slope, hot-dip galvanized. * 10 retractable UVV lashing rings LC 3000 daN in the existing outer frame perforation, in addition * Additional lashing options via holes (Ø 50 mm, LC 1200 daN) in front and end carriers * Toolbox in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in the front carrier * Height-adjustable landing gear at front, folding supports at the rear * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 removable LED beacon at the rear * * Leasing, hire purchase, financing, trade-in possible * e.g. 515 euros for 60 months term, no down payment, no residual value * * Our business hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside business hours, we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in possible. Lhedpfx Aoyadz Rof Tof

Stav: použitý, najazdené kilometre: 1 100 km, typ prevodu: iný, farba: biely, celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 600 kg, maximálna hmotnosť nákladu: 25 400 kg, veľkosť pneumatiky: 425/65R22,5, prvá registrácia: 03/2016, zavesenie: vzduch, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), underrun protection, support legs Superstructure: Liebherr concrete mixer type HTM 1004, approx. 10m³, 2x 10t BPW axles! Matching hydraulics for power take-off on the towing vehicle available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Ljdpfsi Rk Axox Af Tohf

Stav: použitý, konfigurácia náprav: 2 nápravy, Rok výroby: 2014, Výbava: ABS, Pre otázky týkajúce sa vozidla je Vám k dispozícii pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT Betonmixer náves Nadstavba: Liebherr HTM 1004 10m³, nápravy BPW, bubnové brzdy, pružinová brzda, Wabco ABS, 1. náprava zdvíhateľná, vzduchové odpruženie, prípustná celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 510 kg, nosnosť: 25 490 kg, profil pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Lhodpfx Afsyfu Sdo Tsf Na požiadanie Vám radi pripravíme ponuku na leasing alebo financovanie. Pán Seidel (tel.) Vám ochotne poradí. Viac informácií nájdete na našej domovskej stránke. ... Zmena, omyly a medzičasný predaj vyhradený!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32 000 kg Vonkajšie rozmery: 0x2500x4000 Pre viac informácií kontaktujte Tobias Ebert.

Stav: nový, maximálna hmotnosť nákladu: 18 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 24.0: ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové odjištění pružinových válců * Bubnové brzdy ----Pérování: * Vzduchové pérování s manuálním snížením vzadu ----Náprava: * 3 x 11 t nápravy Gigant * Střední náprava zvedací ----Tažné zařízení: Lhedpfxspk D Awe Af Tof * Pneumaticky sklopné tažné zařízení, délka 2 100 mm s tažným okem 40 mm a výškově stavitelné ----Elektroinstalace / Osvětlení: * LED koncová světla * 15kolíková elektrická zásuvka * RDÜ (systém sledování tlaku v pneumatikách) ----Obecné přídavné díly: * Skříň na nářadí z práškově lakovaného ocelového plechu (Š: 1 000 mm x V: 300 mm x H: 450 mm) * Skříň na sítě pro kontejnery z pozinkovaného ocelového plechu (Š: 960 mm x V: 300 mm x H: 450 mm) * Boční ochrana proti podjetí * Plastové čtvrtblatníky se zástěrkami * Plastové ochranné nárazníky vzadu * Mechanické vzpěry vzadu ----Kontejnerová / Nástavbová plocha: * Žárově zinkovaný hlavní rám se zvýšenými vnějšími rámy (cca 25 mm zvýšení) pro vedení válcovacích kontejnerů * Ocelová podlaha s lůžky kol v oblasti podvozku * Při transportu abrollkontejnerů možné délky kontejneru 5 500 – 7 000 mm * Pneumatické 4bodové upínání kontejneru a mechanicky vložitelné opěrné úhelníky vpředu ve vodicích drahách * Certifikát o zajištění nákladu dle DIN 30722 – 1 * Možnost přepravy až 2 valníkových kontejnerů s max. objemem 10 m³ * 8 přestavitelných dorazů na stranové centrování kontejnerů, přední 4 dorazy jsou nasouvací s kyvným dorazem ----Zajištění nákladu: * 3 páry 10t UVV kotevních ok na boku pro uchycení napínacích prostředků pro tvarové a silové zajištění kontejnerů * 4 zajišťovací tyče typu čtyřlístek (na boku) a 1 pár 13,4t UVV kotevních ok vpředu * Certifikát o zajištění nákladu dle DIN EN 12195-1, DIN EN 12640, DIN EN 12642 a VDI 2700 ----Nájezdové rampy: * Svarový pás jako protiskluzová úprava v oblasti nájezdové dráhy * 1 pár hliníkových nájezdových ramp (16 t/pár), 2 800 x 400 mm vhodné pro kolová a pásová vozidla (uzamykatelný úložný prostor zezadu) ----Obutí: * Pneumatiky: 235/75 R17,5 ----Jízdní výška: * Jízdní výška při zatížení cca 1 003 mm ----Užitečné zatížení: * Nosnost 18 900 kg ----Lakování: * Konturová páska po stranách a vzadu, reflexní * Nápravy, otočný čep, tažná zařízení a vzdušníky lakovány v černém odstínu * Žárově zinkovaný hlavní rám ----Info: * Technicky přípustná celková hmotnost 27 000 kg * Nové vozidlo bez první registrace se zárukou výrobce * Změny a předběžný prodej vyhrazeny ----Dodací lhůta: * K dodání od 20. kalendářního týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 18 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 24.0: ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové odjištění pružinových válců * Bubnové brzdy ----Pérování: * Vzduchové pérování s manuálním snížením vzadu ----Náprava: * 3 x 11 t nápravy Gigant * Střední náprava zvedací ----Tažné zařízení: * Pneumaticky sklopné tažné zařízení, délka 2 100 mm s tažným okem 40 mm a výškově stavitelné ----Elektroinstalace / Osvětlení: * LED koncová světla * 15kolíková elektrická zásuvka * RDÜ (systém sledování tlaku v pneumatikách) ----Obecné přídavné díly: * Skříň na nářadí z práškově lakovaného ocelového plechu (Š: 1 000 mm x V: 300 mm x H: 450 mm) * Skříň na sítě pro kontejnery z pozinkovaného ocelového plechu (Š: 960 mm x V: 300 mm x H: 450 mm) * Boční ochrana proti podjetí * Plastové čtvrtblatníky se zástěrkami * Plastové ochranné nárazníky vzadu * Mechanické vzpěry vzadu ----Kontejnerová / Nástavbová plocha: Lhjdpfjpk D Iisx Af Tjf * Žárově zinkovaný hlavní rám se zvýšenými vnějšími rámy (cca 25 mm zvýšení) pro vedení válcovacích kontejnerů * Ocelová podlaha s lůžky kol v oblasti podvozku * Při transportu abrollkontejnerů možné délky kontejneru 5 500 – 7 000 mm * Pneumatické 4bodové upínání kontejneru a mechanicky vložitelné opěrné úhelníky vpředu ve vodicích drahách * Certifikát o zajištění nákladu dle DIN 30722 – 1 * Možnost přepravy až 2 valníkových kontejnerů s max. objemem 10 m³ * 8 přestavitelných dorazů na stranové centrování kontejnerů, přední 4 dorazy jsou nasouvací s kyvným dorazem ----Zajištění nákladu: * 3 páry 10t UVV kotevních ok na boku pro uchycení napínacích prostředků pro tvarové a silové zajištění kontejnerů * 4 zajišťovací tyče typu čtyřlístek (na boku) a 1 pár 13,4t UVV kotevních ok vpředu * Certifikát o zajištění nákladu dle DIN EN 12195-1, DIN EN 12640, DIN EN 12642 a VDI 2700 ----Nájezdové rampy: * Svarový pás jako protiskluzová úprava v oblasti nájezdové dráhy * 1 pár hliníkových nájezdových ramp (16 t/pár), 2 800 x 400 mm vhodné pro kolová a pásová vozidla (uzamykatelný úložný prostor zezadu) ----Obutí: * Pneumatiky: 235/75 R17,5 ----Jízdní výška: * Jízdní výška při zatížení cca 1 003 mm ----Užitečné zatížení: * Nosnost 18 900 kg ----Lakování: * Konturová páska po stranách a vzadu, reflexní * Nápravy, otočný čep, tažná zařízení a vzdušníky lakovány v černém odstínu * Žárově zinkovaný hlavní rám ----Info: * Technicky přípustná celková hmotnost 27 000 kg * Nové vozidlo bez první registrace se zárukou výrobce * Změny a předběžný prodej vyhrazeny ----Dodací lhůta: * K dodání od 20. kalendářního týdne 2026

Stav: použitý, maximálna hmotnosť nákladu: 14 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2010, ďalšia kontrola (TÜV): 05/2025, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 1 300 mm, Rok výroby: 2010, Výbava: ABS, MÜLLER MITTELTAL RA18 Trailer for hook-lift containers with external rollers 5,500 mm – 7,000 mm German trailer, second owner Technical Data Suitable for hook-lift containers with external rollers, in lengths of 5,500–7,000 mm (internal length), for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40-70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) Lhjdpfjvg T Nyjx Af Tjf - Main chassis frame with raised outer rails to guide the roll-off containers, hot-dip galvanized - Container locking system: The container is secured by 2 pneumatic cross-clamping units at 4 points. After sliding the container onto the trailer, the 4 locking claws are engaged via a valve, fixing the container against the chassis frame. - Additional front securing via 2 plug-in pieces (with empty holder), insertable in various positions along the guide rails. - 2 x 9t BPW axles, 420 mm drum brakes, with air suspension units - Air suspension with lowering function - Steel welded chassis construction - 2-line braking system in accordance with EC EBS regulation - DUOMATIC coupling head - Spring-loaded parking brake - 24 V electrical system - Multi-chamber lighting - 15-pin connector with cable - Lighting according to EC regulations - Factory silver rims - Aluminium underrun protection - Chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800 x 300 x 500) Condition corresponding to age and mileage! Delivery available at extra cost. All information provided without guarantee! Sale to businesses or export only! ATTENTION: PRICE IS NET PLUS VAT Deutsch, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles (9 t each) * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via lift cylinder * Traction aid for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no installation required on the truck side, additional cable for operation from within the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange bolt-type towing eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light ----General Equipment: * BPW landing leg, front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead on the left * Shovel and broom holders in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, located at the right side * Enclosed side underrun protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength, fine-grain steel * 20,000 kg traction force * Hook height 1,570 mm * Hooklift operated via remote control * Remote control features fast-lowering function (unloading only, not while loading) * Emergency stop switches on both left and right sides * Container mountings with 4 supports per side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical drop support legs at rear * Rated for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside its charging cradle, the service brake must be applied to enable radio control. Brake connections must remain connected at all times to operate the hydraulic/pneumatic valves. * Underrun protection monitoring system ensures underrun guard is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, steps, underrun protection, and drop support legs hot-dip galvanized * Axles, air tanks, and front landing leg painted black * Palfinger hooklift painted black/yellow ----Notes: * Subject to errors and prior sale Ledpfx Afjyfy Rrs Tohf * Vehicle is in very good / as-new condition ----Container: Dimensions: * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Notes: * Fittings for hook systems available

Stav: použitý, maximálna hmotnosť nákladu: 22 000 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2008, Výbava: ABS, Identifikačné číslo vozidla: WMM0000080052540 PRIAMA NAKLADACIA PLOCHA Uzamykanie kontajnera Vlastná hmotnosť: 8 000 kg Nemecká STK: splatná Nápravy Gigant s bubnovými brzdami Vzduchové odpruženie Rozmery plošiny: 9 400 mm – výška nakladania: 880 mm – rozmery viď obrázok č. 4 Možnosť rozšírenia na 3 000 mm so svetlami Oje – 50 mm Hydraulické rampy, dvojdielne – dĺžka 2 600 + 1 600 mm – šírka 650 mm Opory Pneumatiky: 235/75 R17,5 Zmeny, medzipredaj a chyby sú výslovne vyhradené. Popis slúži len na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Rozhodujúci je popis podľa kúpnej zmluvy. Lhjdotuhv Ropfx Af Tef Naša ponuka je všeobecne bez novej platnej technickej kontroly. V prípade záujmu o novú TK Vám radi pripravíme ponuku v spolupráci s našimi partnerskými servismi! Vozidlo môže byť polepené reklamou a/alebo označené popisom. Platí naše všeobecné dodacie a platobné podmienky.

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS * RDÜ (tire pressure monitoring system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Side-mounted tool box, right, made of galvanized steel sheet * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls at the top with internal tube reinforcement, foldable without central stanchions, with drop side spring-assist * Rear gate foldable and pivoting with manual central locking * Hot-dip galvanized, bolted rear stanchions * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings each side integrated into the outer frame * 4 mm fine grain steel plate floor * Net hooks, rear mounting rail for loading ramps * Prepared for subsequent installation of extension boards * Reinforced body with load securing certificate according to EN 12642 XL * 2-step entry on the left side as step-up aid * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear, recessed into the chassis below the loading area * Axles, springs, air tanks, and landing gear painted black Lhedsl Th A Ejpfx Af Tjf * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without first registration, with manufacturer’s warranty * Tyres: 385/55 R 22.5 * Side boards painted in RAL 9010 pure white * Painting of the side walls in an RAL colour shade available at extra cost * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake chamber * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm), hot-dip galvanized, with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized, bolted underride guard * Lockable toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls with internal tube reinforcements (no centre stanchions), drop sides with sideboard spring assist * Rear tailgate foldable and swinging with manual central locking * Screwed, hot-dip galvanized rear stanchions * Each corner fitted with one 5 t lashing point, each side with four 3 t lashing rings integrated in outer frame * 4 mm fine-grain steel floor plate * Net hooks, rear ramp mounting rail * Preparation for later retrofitting of sideboard extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step access step on the left side as boarding aid * 1 pair aluminium loading ramps, approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed under the load bed in the chassis * Axles, springs, air tanks and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized Lodpfx Aev Dz N Nsf Tohf * New vehicle without first registration, with manufacturer's warranty * Tyres: 385/55 R 22.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in any RAL colour available at extra cost * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: Ledpfx Afjx Dp Ate Tehf * 2 x t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12/24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Remote power supply 12+24V via tail light circuit ----General Attachments: * BPW landing gear (front) * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Detachable pin towing eye (usable only with retracted underrun protection) * Closed plastic half-shell single mudguards * Two-step access ladder in front of front wall, left side * Shovel and broom holder in front of front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation ----Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023) * Base frame made of high-strength fine grain steel * 20,000 kg pulling force * Hook height: 1,570 mm * Hooklift control via remote control * Remote control with quick function for lowering, but not for lifting * Emergency stop switches on left and right sides * Container platform with 4 lateral supports per side and 1 roller at the rear per side * Hydraulic rear lock * 2 additional hydraulic cylinders to support the main boom lifting * 2 x mechanical drop-down rear supports * Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brake System: * Wabco EBS-E braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12/24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail lights ----General Fittings: * BPW landing gear at front * Manually extendable underride guard for container lengths over 6,000 mm * Speedline diamond aluminium rims * Pin-lock tow coupling (use only with underride guard pushed in) * Enclosed plastic half-shell individual mudguards * Two-step access before the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side * Enclosed side guard usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg tractive force * Hook height 1,570 mm * Hookloader control via remote control * Remote control with quick function for lowering only, not for picking up * Emergency stop switches on both left and right sides * Container mountings with 4 supports each side and 1 roller at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting Ljdpfxsx Dp Age Af Tehf * 2 x mechanical drop-down rear supports * Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate. * Monitoring system for underride guard ensuring it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised * Axles, air tank, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axles: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24 V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24 V electrics * Extended connection lines for agricultural and forestry vehicles * Power supply to remote control 12+24 V via tail light Lhjdpfx Aex Dp Amjf Tjf ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable tow pin coupling (usable only when underrun protection is retracted) * Closed plastic single-splashguard fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tensile force * Hook height 1,570 mm * Hooklift control via remote control * Remote control with rapid function for tipping off, but not for lifting * Emergency stop switches on both the left and right sides * Container supports with 4 rests each side plus 1 roller each at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves. * Monitoring system for underrun protection—ensures retraction during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in a shade of black * Palfinger hooklift painted black/yellow ----Info: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Cargo length: 5,500 mm * Cargo width: 2,300 mm * Cargo height: 1,000 mm Info: * Mounting brackets for hook systems according to...

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Lhsdpfx Afjrwc R Re Tsf * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear foldable supporting legs, external * Plastic toolbox approx. 858 x 500 x 500 mm at front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fitted in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Rear bolsters, bolted * Drop sides with spring assists ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Provision for installation of 3 t recessed lashing rings every 600 mm * In the front and rear corners, each with 1 x 6.3 t lashing point * Various holes in bulkhead and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis, lashing capacity up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (can be telescoped down to 20 mm clearance) * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, as well as flange towing eye painted in a shade of black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available approx. from CW 16/2026

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Braking system: * Wabco ABS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: Lhsdpfx Afjl Th Eye Tof * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalising assembly ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General attachments: * Jost landing gear at front * Side underrun protection * Folding A-plate at rear ----Electrics / Lighting: * 15-pin electrical plug * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side panels * Removable steel rear panel * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front, incl. 2 drop-in skip stops at the front in 2 positions * Rear crossmember for fitting aluminium drive-on ramps, incl. 2 additional rear supports ----Loading edge: * Unladen loading height approx. 710 mm ----Load securing: * 4 repositionable skip stops (fit in 2 positions) for lateral centering of skips * Each side with 1 x (13.5 t) UVV lashing ring for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Painting: * Chassis, front panel, side panels, mudguards, drawbar, rear supports hot-dip galvanized * The axles, springs, landing gear, and air tanks painted in black ----General information: * Vehicle registered for one day 06/2024, not loaded/used due to missing tyre pressure monitoring system * Errors and prior sale reserved ----Delivery time: * Available immediately from Egestorf, A7

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 tonne Gigant axles * Parabolic suspension with tandem equalizer unit Lhjdpfxjl Th Hte Af Tof * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underride protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts * Bolted rear stanchions * Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear * Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tyres: 285/70 R19.5 * Side panels painted to RAL 9010 pure white * Painting of side walls in other RAL colours possible at extra cost * Vehicle has a day permit (unused) * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal – no installation required on truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front support winch * Folding external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * 400 mm smooth steel bolted front wall * Bolted rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings at 600 mm intervals * In each front and rear corner: 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centered longitudinally for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 ltr. / min. up to max. 140 ltr. / min.) ----Paintwork: * Chassis, drawbar, front wall, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Sideboard paintwork in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Example images Lodpfx Afsrwc R Ao Tshf ----Delivery time: * Available approx. from calendar week 16/2026

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Brzdy: * Wabco ABS brzdový systém * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oj / Tažné oko: * Výškově nastavitelná tažná oj (+/- 150 mm) * 40 mm šroubovací tažné oko ----Obecné přídavné díly: * Přední opěrná noha Jost * Boční ochrana proti podjetí * Sklopný zadní A-štít ----Elektroinstalace / Osvětlení: * 15-pólová zásuvka * Vícekomorová zadní světla Lodpfxjl Th Dms Af Tjhf ----Nadstavba: * Pevné ocelové čelní a boční stěny * Odnímatelná ocelová zadní stěna * Podlaha z jehličnatého dřeva, tl. 50 mm * 1 kluzná plechová vložka 750 x 1 000 mm v přední části včetně dvou zasouvacích držáků korby vpředu (2 polohy) * Zadní příčník pro uložení hliníkových najížděcích ramp včetně dvou přídavných opěr vzadu ----Nakládací hrana: * Výška nezatížené nakládací hrany cca 710 mm ----Zajištění nákladu: * 4 přestavitelné zásuvné dorazy v 2 polohách pro boční centrování korby * Bočně vždy 1x (13,5 t) UVV uchycení pro zavěšení napínacích prvků * 2 ráčnové napínače (seřizování vřetenem) s kompenzačním řetězem a rychlozkracovačem (napínací síla 6 300 kg) ----Pneumatiky: * Pneumatiky: 285/70R19.5 ----Rozvor: * Rozvor: 1 140 mm ----Lakování: * Podvozek, čelní stěna, boční stěny, blatníky, tažná oj a zadní opěry žárově zinkované * Nápravy, pružiny, opěrná noha a vzdušníky lakované v černé barvě ----Obecné informace: * Vozidlo má denní registraci 06/2024, kvůli chybějícímu systému monitorování tlaku v pneumatikách nebylo zatěžováno ani používáno * Změny, chyby a mezitímní prodej vyhrazeny ----Dostupnost: * K dispozici ihned z Egestorfu u dálnice A7

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis * 15-pin electrical plug * Multi-chamber tail lights * Bolt-on underrun protection Lhodpfx Ael Th Dusf Tjf * Plastic quarter fenders * Lashing hooks located at the central locking bearings and 2 pieces at the front wall * Chassis made of fine-grain steel * Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device * Rear posts bolted * Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door * Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm steel floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis * Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tyres: 285/70 R19.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost * Vehicle has a one-day registration (not in use) * Subject to errors and prior sale * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (to a total length of 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of front wall for subsequent installation of container locks * Bolted smooth sheet metal headboard * Trapezoidal-profile steel side walls, foldable with drop-side lifting assist * Steel rear wall, can be slid between the ramps (bracket for storage inside in front of the headboard when not in use) * Bolt-on rear stakes ----Load Securing: Lhodpfx Aorvvflsf Tjf * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm * One 6.3 t lashing point in each front and rear corner * Multiple drill holes in the head and end cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring assembly for one-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, headboard, access ramps, and rear wall * Drop-side paint color in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: Lsdpfexglibox Af Tshf ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to total length 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox, front right, outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Mounting facility in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down side walls made of trapezoidal profile steel with sideboard spring assist * Steel rear wall, retractable between ramps (bracket for storage provided inside at the front wall when not in use) * Rear stakes, bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various bore holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall * Sideboard color: RAL 2011 deep orange * Painting of side walls in any RAL color available at surcharge ----Info: * --Reinforced and certified construction according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and interim sale excepted ----Delivery time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: Ljdpfx Afeq Dyvvj Tjhf * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026