Nízkozdvižný prívesMÜLLER-MITTELTAL
11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Nízkozdvižný príves
MÜLLER-MITTELTAL
11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Pevná cena plus DPH
27 500 €
(32 725 € brutto)
Rok výroby
2025
Stav
Nový
Umiestnenie
Egestorf 

Základné údaje
Cena a lokalita
Pevná cena plus DPH
27 500 €
(32 725 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko

Zavolať
Technické detaily
- Maximálna hmotnosť nákladu:
- 8 870 kg
- Celková hmotnosť:
- 11 900 kg
- Konfigurácia náprav:
- 2 nápravy
- Dĺžka ložného priestoru:
- 6 270 mm
- Šírka ložného priestoru:
- 2 470 mm
- Výška ložného priestoru:
- 400 mm
Podrobnosti ponuky
- ID inzerátu:
- A104-27-699
- Referenčné číslo:
- 57691
- Aktualizácia:
- naposledy dňa 11.06.2026
Popis
* ETÜ-TA-ER 11.9:
----Brakes:
* Electronic braking system (EBS)
* Emergency release system for spring actuators
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Equipment:
* Jost mechanical landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox front right, mounted on the front bulkhead exterior
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Loading Platform:
* 50 mm softwood flooring
* 20" container locks mounted front and rear
* Bolt-on bulkhead made of smooth sheet
* Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist
* Bolt-on, hot-dip galvanized rear posts
Ndodpfxel Tilxe Abtoa
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side)
* In the front and rear corners, one 6.3 t lashing ring fitted in each
* Various apertures for securing options up to 1.2 t in the front and rear cross members
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Rear stowage compartment under platform, integrated into the chassis
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads
* Board colour in RAL 9010 pure white
* Side wall painting in an RAL colour tone available at extra charge
----Info:
* New vehicle, not registered
* Subject to prior sale and errors excepted
----Delivery time:
* Available immediately ex works Egestorf
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
----Brakes:
* Electronic braking system (EBS)
* Emergency release system for spring actuators
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Equipment:
* Jost mechanical landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox front right, mounted on the front bulkhead exterior
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Loading Platform:
* 50 mm softwood flooring
* 20" container locks mounted front and rear
* Bolt-on bulkhead made of smooth sheet
* Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist
* Bolt-on, hot-dip galvanized rear posts
Ndodpfxel Tilxe Abtoa
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side)
* In the front and rear corners, one 6.3 t lashing ring fitted in each
* Various apertures for securing options up to 1.2 t in the front and rear cross members
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Rear stowage compartment under platform, integrated into the chassis
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads
* Board colour in RAL 9010 pure white
* Side wall painting in an RAL colour tone available at extra charge
----Info:
* New vehicle, not registered
* Subject to prior sale and errors excepted
----Delivery time:
* Available immediately ex works Egestorf
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrovaný od: 2001
170 Inzeráty online
Odoslať dopyt
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Malý inzerát
Neuenkirchen
955 km
20 stôp námorný kontajner, skladovací kontajner,
20 Fuß Container
20 Fuß Container
Malý inzerát
Mühlhausen
606 km
Stavebný príves
Stema® BauwagenBaustellenwagen 310cm x 200cm 80-100km/h
Stema® BauwagenBaustellenwagen 310cm x 200cm 80-100km/h
Malý inzerát
Gilze
1 099 km
Žeriavové vozidlo
SpieringsSK375-AT3 / EURO 5
SpieringsSK375-AT3 / EURO 5
Malý inzerát
Wiesmoor
985 km
Otvorený príves s plachtou
FLIEGLTPS 118 Gardine Durchlader Tandem
FLIEGLTPS 118 Gardine Durchlader Tandem
Malý inzerát
Achim
888 km
Otvorený príves
HUMBAURGlas/Querschienen/Rampenschacht/Luftfederung
HUMBAURGlas/Querschienen/Rampenschacht/Luftfederung
Malý inzerát
Diespeck
671 km
Príves s otvorenou plošinou
TheimlTH 10,5
TheimlTH 10,5
Malý inzerát
Burghaun
750 km
Plošinová dodávka s dvojitou kabínou
Mercedes-BenzSprinter 317 CDI DoKa Klima Stdheiz AHK3,5to
Mercedes-BenzSprinter 317 CDI DoKa Klima Stdheiz AHK3,5to
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
MÜLLER-MITTELTAL11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
Malý inzerát
Delbrück
866 km
Bočný vysokozdvižný vozík
Pagino 235- 12
Pagino 235- 12
Váš inzerát bol úspešne odstránený
Došlo k chybe






































































































































































