Faymonville 4-2+2-Achs-Tele-Semi M. Radmulden U. Rampen kúpiť použité (68 354)

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Kjdpfxstvfkfe Ac Isdl Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: Kodpfxji Ai E Rs Ac Iodl - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform Kdsdpfxsyxc Eye Ac Iol - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: použitý, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust welded steel frame construction with a front frame offset and level loading platform with rear taper approx. 500x100 mm - 200 mm gooseneck with chamfered front corners - Sloped end of the gooseneck approx. 500 x 100 mm (grip steps on the outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Closed external frame as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm lockable every 500 mm pneumatically - Frame stepped 80x80mm before and after division - Reinforced frame design / point load in retracted state at center of gravity - Without extendable widening sections but prepped for later installation (= guide tubes welded into frame) - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Rear underride guard = extended rear plate - Drop landing legs at the rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: Ksdpeywv Ixefx Ac Ijdl - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle as lift axle (wired via EBS), full automatic confirmation with manual emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally positioned offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Equipment: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in rear plate - 1 ECE board insertable at rear - 11 pairs ZK modules 10t side: - 2x on the gooseneck - 2x on the loading platform before the extension - 7x after the extension - No rear towing eyes - Extendable warning signs including 3 position lights each, front at landing gear and rear before tail plate, steplessly extendable up to load width 4,500 mm - 4 holders for warning signs insertable in stanchion pockets on the loading platform - 6 pairs of side stanchion pockets for 100x50 mm plug-in stanchions - 2 cross rows of stanchion pockets for 100x50 mm stanchions on the gooseneck from outer to main frame (1x before and 1x after king pin positions) - 3 cross rows of stanchion pockets for 100x50 mm stanchions on the loading area from outer to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard - Pre-installed (NATO cable routing, hole pattern for subsequent installation of NATO socket at front of rear plate, and holder on the vehicle) for retrofitting an electrohydraulic unit right rear for possible control of loading ramps Optional: The trailer can be delivered with aluminum loading ramps.

Stav: nový, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 900 kg, Podvozok: - Pevná oceľová rámová zváraná konštrukcia s predným zalomením rámu a rovným ložným povrchom so skosením vzadu cca 500x100 mm - Krk rámu 200 mm s prednými skosenými rohmi - Skosený koniec labutieho krku cca 500 x 100 mm (vonkajší rám v oblasti zadného skosenia opatrený stúpacími rebrami) - 2 polohy kráľovského čapu s výmenným 2” čapom - Vonkajší rám uzavretý smerom von, dierovaný profil - Ložná plocha s výsuvným centrálnym rámom, výsuv cca 2 000 mm, po 500 mm s pneumatickým aretovaním - Rám pred a za delením so stupňom 80x80 mm - Spevnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku - Bez výsuvných rozširovacích prvkov na ložnej ploche, pripravené na dodatočnú montáž (vodicí rúry zvarené v ráme) - S bagrovo jamou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začína cca za 2. nápravou po koniec vozidla - 1 pár kolových jám medzi 1. a 2. nápravou s oceľovým krytím (Körapur povrch), hĺbka cca 400 mm - Proti podbehnutiu = predĺžený záverečný plech - Zadné podpery s rýchlym spúšťaním Nápravy, riadenie a pneumatiky: - BPW vzduchové nápravy, každá 10 t nosnosť, priemer vankúša 360 mm - S-cams 300/200 mm, bezazbestové brzdové obloženie - Automatický napínač ťahadla - Zdvih a spúšťanie celkový zdvih cca 200 mm - 2. jazdná poloha cez guľový ventil +50 mm - 1. náprava zdvíhacia (káblovaná cez EBS), automatické prepínanie s núdzovým mechanickým ovládaním tlačidlom na návesu Kdsdpfx Asxnnk Djc Iel - 3. náprava vlečená, s elektrickou a mechanickou aretáciou - 12 oceľových diskov, 10-dierové, so stredovým upevnením - 12 pneumatík 245/70 R 17.5 143/141J, bezdušové - Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: - Na labutom krku zasúvateľné bočnice a zadné čelo, výška cca 400 mm - Držiak rezervného kolesa - Bočný hliníkový nárazník - 4 podkladové kliny vrátane držiakov - Podlhovastý držiak ŠPZ v záverečnom plechu - 1 zasúvateľná ECE tabuľa vzadu - 11 párov ZK modulov 10t naboku: - 2x na labutom krku - 2x na ložnej ploche pred výsuvom - 7x za výsuvom - Výsuvné výstražné tabule vrátane 3 pozičných svetiel vpredu na oporných nohách a vzadu pred záverečným plechom, bezstupňovo vysúvateľné na šírku ložnej plochy do 4 500 mm - 4 zasúvateľné držiaky pre výstražné tabule v rúrkach na ložnej ploche - 6 párov zásuvných vreciek na laty 100x50 mm po bokoch - 2 priečne rady zásuvných vreciek na laty 100x50 mm na labutom krku od vonkajšieho rámu do hlavného rámu (1x pred a 1x za kráľovským čapom) - 3 priečne rady zásuvných vreciek na laty 100x50 mm na ložnej ploche od vonkajšieho rámu do hlavného rámu (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou) - 2 páry oceľových dosiek v ložnej ploche pre zámky na kontajner na 1x 20ft kontajner - Gumová zásterka namontovaná na ochranu proti podbehnutiu Náves je voliteľne dostupný s rampami.

Stav: nový, pohotovostná hmotnosť: 8 490 kg, maximálna hmotnosť nákladu: 40 510 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 490 kg, Výbava: ABS, Chassis: - Robust steel frame construction with front frame offset and flat loading platform with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered corners - Sloping gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2" king pin - Outer frame closed to the outside as a perforated outer frame for lashing with tension straps - Reinforced frame design / point load at center of gravity - Preparations for extendable width extensions in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting roughly after 2nd axle to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Side underrun protection = extended end plate - Drop-down supports at the rear Floor: - 35 mm larch wooden floor with aluminum omega profiles Axles, Steering and Tires: - BPW air suspension axles, each with 10 t axle load, bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), automatic activation, with mechanical emergency operation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring system Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connections yellow/red Painting: - Steel shot blasting, spray galvanizing of chassis and priming - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel mudguards with Clear-Pass - Long license plate holder in end plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extending warning signs incl. 3 position lights each, front at landing gear and rear in front of end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs for plugging into stake pockets on the loading platform - 6 pairs of stake pockets at the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward to main frame (1x in front of and 1x behind the king pin positions) Ksdpfx Acjwu A Slo Isdl - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame inward to main frame (1x in the front area, 1x before 1st axle and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for later installation of NATO socket at the front of the end plate as well as bracket on the vehicle) for retrofitting an electro-hydraulic unit at the rear right for possible operation of drive-on ramps - Mechanical 24 t landing legs with single-side op

Stav: použitý, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2011, Výbava: ABS, Vehicle ID no.: W09TS300990M49248 TELESCOPIC EXTENSION up to 4,300 mm SLIDING DECK WHEEL WELLS Unladen weight: 9,000 kg German MOT (HU) due Gooseneck: 3,650 mm – Fifth wheel height: 1,250 mm Low bed: Length: 9,430 mm (of which 1,830 mm are chamfered) – Width: 2,540 mm – Loading height: 890 mm Kdodpfxeyx N Eyj Ac Ijl Detachable rails Support legs Wide load lighting Front fifth wheel load: max. 19,000 kg Technical axle loads 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = LIFTABLE 2 x toolboxes Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors are expressly reserved. This description serves solely for general vehicle identification and does not constitute a guarantee in the legal sense of sales law. The description as per the purchase contract shall be decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide a quote from our partner workshops! Vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Stav: použitý, maximálna hmotnosť nákladu: 40 800 kg, celková hmotnosť: 53 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2012, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Faymonville Multimax STN-4AX, 4-nápravový teleskopický podvalník Rok výroby: 11.2012 Prevádzková hmotnosť: 13 000 kg Celková hmotnosť: 53 800 kg Technicky možné: 55 400 kg Užitočné zaťaženie: 40 800 kg Zaťaženie na oji: 25 000 kg Pneumatiky: 205.65R17,5 3. a 4. náprava riadená nútene 4x SAF nápravy 7 600 kg s vzduchovým odpružením Dĺžka: 13 475 mm až 20 275 mm (výsuvná) Šírka: 2 540 mm až 2 620 mm Výška: 1 200 mm ! Ďalšie informácie na požiadanie e-mailom ! Údaje sú nezáväzné, možnosti omylu vyhradené! Údaje uvedené na internete predstavujú nezáväzný popis a neznamenajú garantované vlastnosti. Predávajúci nezodpovedá za chyby, preklepy ani chyby v prenose dát. Zmeny vyhradené. Stály nákup a predaj, ako aj protiúčet a prenájom žeriavov a zdvíhacích vozidiel Kjdpfx Aeu Aynljc Ijdl a tiež stavebných strojov a ťažkotonážnych vozidiel.

Stav: nový, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 100 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, ABS, Vzduchové odpruženie s možnosťou zdvíhania a spúšťania, Váhy na zaťaženie náprav, Celková dĺžka ložnej plochy cca: 9 100 mm, Nízka ložná plocha cca: 6 900 mm dĺžky, Výška ložnej plochy pri zaťažení cca 890 mm, 24 x upevňovacie oká po 10 t, 12 x vrecká na kolíky vo vonkajšom ráme, Nábehová lišta na vonkajšej strane rámp a v zadnej šikmine, Dvojdielne nájazdové rampy (cca 4 300 x 750 mm), Rámpe nastaviteľné do strán, Drevená podlaha 68 mm hrubá, Úložný box s vekom na upevňovacie reťaze alebo upínacie popruhy, Kontúrne označenie podľa predpisov, Výstražný maják, Pružinová parkovacia brzda, Vrátane ukazovateľov zaťaženia náprav, Rám žiarovo zinkovaný, Príplatok za: Hydraulický posuv rámp = Cena: 1 000 €, -- Chyby v tlači, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Viac detailov na: ! Kdodpsy Rlmdsfx Ac Isl

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Kdjdpfx Aceq Euako Isl Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis Kedpfxjtpta Dj Ac Iodl * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks Kedpfx Aeykx Nkoc Isdl * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards Kdedpfx Aoykx Nqec Isl * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, pohotovostná hmotnosť: 9 800 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 9 800 kg, Výbava: ABS, Chassis: - Robust steel frame welded construction with front frame cranking and level loading platform, rear bevel approx. 500x100 mm - Neck of frame 200 mm with beveled front corners - Sloped end swan neck approx. 500 x 100 mm (ribbed anti-slip strips on outer frame in the area of the rear bevel) - 2 king pin positions with exchangeable 2" king pin - Outer frame fully welded as perforated external frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, can be locked pneumatically in 500 mm increments - Frame before and after separation with 80x80 mm step - Reinforced frame design / point load supported at center of gravity when retracted - No extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame) - With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (Körapur-coated), depth approx. 400 mm - Underrun protection = extended end plate - Drop leg rear supports Ramps: - 2 pcs. special design two-piece loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden decking - Incl. ribbed anti-slip strips on ramps - Can be secured in travel position with lashing straps - Operated via control lever mounted at rear, RH side of chassis - Laterally hydraulically adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears with single-side operation and load equalization Axles, Steering, and Tyres: - BPW air suspension axles, max. 10 t axle load each, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower system, total travel approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle lift axle (wired via EBS), activation fully automatic with emergency operation by push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered offset mounting - 12 tyres size 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring system Kdedpfx Acjxgm S Ds Iel Accessories: - Plug-in side and rear walls on swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - 1 plug-in ECE rear panel - 11 pairs ZK-modules 10t each, on sides: - 2x on swan neck - 2x on platform before extension - 7x after extension - Extendable warning boards incl. 3 position lamps each, mounted at front landing gears and rear before end plate, steplessly extendable to platform width of 4,500 mm - 4 mounting slots for warning boards in stake pockets on load platform - 6 pairs of side stake pockets for 100x50 mm plug-in stakes - 2 transverse stake pocket rows for 100x50 mm stakes across swan neck from outer frame to main frame (1 before and 1 after king pin positions) - 3 transverse stake pocket rows for 100x50 mm stakes across load platform from outer frame to main frame (1 before extension, 1 after extension, 1 after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to fit 1x 20ft container - Rubber skirt fitted to underrun protection

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position Kdedpfjwcmhaex Ac Ijl - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller Kodpfx Acjuadk Ns Iodl - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, maximálna hmotnosť nákladu: 43 929 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 16 690 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Výbava: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, telescopic with wheel recesses (NEW) ----Features & Highlights Technology & Construction - Extendable low loader with wheel recesses - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extensions - Unladen weight: approx. 14,071 kg - Permitted total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles - 4 BPW axles, 2 fixed at the front, 2 self-steering at the rear - Lifting axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring system to R141 Ramps & Loading Area - Foldable 40-tonne ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + cover bridges included - Excavator boom recess at the rear Load Securing Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / recess area - 5×2 stake pockets, removable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort Ksdpfx Ajx Efznoc Iedl - 1× toolbox (700×400×360 mm) - Stake holder box - Rotating beacon - LED side lights, LED work lights - Wheel chocks - Extension boards with LED - Standard 2" king pin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special Features - New & immediately available - High payload, extremely versatile - Perfect for machine transport, construction machinery, vehicles, etc. - Very robust construction, high-quality BPW components For further information, please do not hesitate to contact us.

Stav: nový, maximálna hmotnosť nákladu: 43 929 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 16 690 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Telescopic Low Loader with Wheel Wells (NEW) ----Equipment & Highlights Technology & Bodywork Telescoping low loader with wheel wells * External length 13,190 mm, platform 9,240 mm + 3,500 mm extension * Platform height only 875 mm for low loading height * Total width 2,550 mm + 600 mm extension * Unladen weight approx. 14,071 kg * Permissible total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles, front 2 rigid, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tires 245/70 R17.5 (M+S + 3PMSF) * Tire pressure monitoring system according to R141 Ramps & Loading Area Folding 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + covering bridges included * Excavator arm recess at rear Load Securing Extensive lashing points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / wheel well area * 5×2 stake pockets, removable stakes 50×100 mm * Container lock for 1×20 ft or 1×30 ft Features & Comfort 1× toolbox (700×400×360 mm) * Stake pocket box * Beacon light * LED side lighting, LED work lights * Wheel chocks * Extension panels with LED Kedjx Ix Rqjpfx Ac Iedl * Standard 2" king pin * Metallized chassis (Zn/Al 85/15) – strong corrosion protection * Color: Red ----Special Features * New & immediately available * High payload, extremely versatile * Perfect for machine transport, construction machinery, vehicles, etc. * Very robust construction, high-quality BPW components For further information, we are at your disposal.

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Ksdok Af Svopfx Ac Ijdl Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: použitý, maximálna hmotnosť nákladu: 34 440 kg, celková hmotnosť: 46 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1999, dĺžka ložného priestoru: 13 550 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 950 mm, celková šírka: 2 550 mm, Celková hmotnosť: 46.500 kg Pohotovostná hmotnosť: 12.060 kg Užitočné zaťaženie: 34.440 kg Kdedpfx Acjycpbns Iol Celková dĺžka: 13.550 mm - 26.550 mm Šírka: 2.550 mm Ďalšie informácie - 3 nápravy hydraulicky nútene riadené - Preklápací klin nad sedlom - Lišta na zavesenie rámp - Zasúvacie kolíky na ložnú plochu - Dvojité teleskopické vysunutie až do 26.550 mm - Skrinka na náradie na labutom krku - Elektrokoleso - Príprava eln - Hydraulická funkcia doťahovania s elektrickým diaľkovým ovládaním - Veľký balík upevňovacích prostriedkov - Vlastná hydraulická čerpacia jednotka Ďalšie nové a použité nízkozdvižné návesy k dispozícii. Viac informácií na

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 42 100 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2001, dĺžka ložného priestoru: 8 960 mm, šírka ložného priestoru: 2 520 mm, celková dĺžka: 12 950 mm, celková šírka: 2 520 mm, celková výška: 3 800 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70R17,5, rázvor náprav: 1 360 mm, maximálna rýchlosť: 90 km/h, farba: modrá, brzda prívesu: príves s brzdou, Rok výroby: 2001, Výbava: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registration 21.11.2001, Overhauled in 2014, Brakes NEW as of 12/2025! 66,000 kg gross train weight with 3-axle tractor unit, Kdedpsyqm I Uefx Ac Iol Gross weight 58,000 kg, Kingpin load 18,000 kg, axles 1–4: 10,000/10,000/10,000/10,000 kg Unladen weight 15,900 kg, For exact dimensions, please refer to the technical data sheet. Lowbed 8.96 m + 5.50 m extension (telescopic), Hydraulic supports at front and rear allow the entire trailer plus 30 t load to be lifted easily; ideal for side unloading from loading ramps, Hydraulic suspension (also enables leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (including counter-steer), Hydraulic ramps + hydraulically extendable to 3,000 mm, Loading platform extendable to 3,000 mm, Tyres 245/70R17.5 1A=6/6/6/6 mm, 2A=11/11/8/8 mm, 3A=9/9/7/7 mm, 4A=11/11/7/5 mm, spare wheel 6 mm, Further details on request. Sale only to businesses or for export. Leasing / Financing available on request – instant processing, even without down-payment! More information and conditions on request. The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are provided without guarantee! Equipment must be checked separately if necessary. The seller accepts no liability for possible typographical or data transmission errors. Subject to error and prior sale. Thank you for your interest! We look forward to your visit. OUR SERVICE We are happy to take your used equipment in part-exchange, 30-day export license plate incl. insurance, EUR-1 + all customs documents for export, TÜV / technical inspection / accident prevention test / tachograph check / OBU installation, Professional delivery to customer, Airport Stuttgart / Sindelfingen train station pick-up by arrangement, Retrofitting of additional accessories as well as other individual customer requests possible upon consultation.

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Kedpfsykpbkex Ac Iodl Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, maximálna hmotnosť nákladu: 30 540 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 550 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 2 990 mm, celková šírka: 2 550 mm, celková výška: 1 010 mm, Rok výroby: 2025, Výbava: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMI-TRAILER RH100 - EXTENDABLE - For construction material and construction equipment transport, NEW VEHICLE Gross vehicle weight (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Unladen weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Extension length approx. 4,000 mm, lockable in increments of 500 mm Reinforced version for building material transports, 20 t/5m at crane center, construction equipment transport up to 20 t (in retracted position) Reinforced external U-profile frame 6 mm Conical cross beams 4 mm Frame tapering at rear, approx. 15°, approx. 500 mm Kdedpfx Acowfu N Rs Iel Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at the front left of the coupling Energy guide chain in the central frame Frame locking with integrated greasing strip 4 pairs of extendable 8 t lashing rings, 9 pairs of 10 t lashing rings on the outer frame profile at the rear, extendable and foldable outward both sides for oversize cargo lashing 10 pairs of lashing studs with welded round steel on the lower outer frame 6 pairs of insert sockets with reinforcement bracket for shaped tube stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), both sides on the outer frame 3 insert socket cross supports for shaped tube stanchions 80x80 mm, positioned at center cross beams Insert socket cross supports as holders for shaped tube stanchions 6 pairs of recessed container locks for: - 2 x 20 ft containers - 1 x 20 ft container centered - 2 x 20 ft containers - 1 x 30 ft container Reinforced rear end plate with continuous mounting rail for drive-on ramps Mechanical 2 x 12 t landing gear, single-side operation + compensating mechanism 2 drop-down support legs at the rear SAF Intradisc-B9 axles with disc brakes Ø370 mm (19.5'' disc), load capacity 9 t/axle, on-road version Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm SAF trailing axle with king pin/low-friction joint, approx. 10° steering angle, electropneumatic reverse lock automatically switched in reverse, additional cab switch with release valve Special axle lift on 1st axle, automatically raises/lowers by load, with forced lowering, start assist button in cab / '3 x braking' Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system complying with EC directives 71/320 ECE R13 2-circuit air brake system, EBS module 2S2M, one axle sensored RSS/RSP - Stability program Spring-loaded parking brake Steel air reservoir Air suspension with lifting and lowering, total stroke approx. 200 mm Automatic driving level 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, 'BASIC' package Axle load display via EBS CANbus signal Tire pressure monitoring according to ECE directive 141 35 mm timber floor, longitudinal over wheels, steel checker plate covering Timber floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes on top of corner posts Front steel corner posts integrated in front wall, front side (free side loading length) 24-volt lighting system in accordance with EC directives 76/756/EEC 2 full-LED multi-chamber tail lights "Aspöck" with int

Stav: použitý, maximálna hmotnosť nákladu: 34 030 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2025, ďalšia kontrola (TÜV): 07/2026, celková šírka: 2 480 mm, Výbava: ABS, Our entire vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Extract from the equipment list. Full specification available upon request. Gooseneck: * Gooseneck with approx. 750 mm x 10° rear bevel, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick, loading area; loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with approx. 1,000 mm x 8° rear bevel * 6 pairs of fold-out external lashing rings (LC 5,000 daN) Kodey Nu Hkopfx Ac Ijdl * 2 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of fold-in internal lashing rings on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) above the axles, checker plate surface Two-piece steel ramps: * One pair of galvanized, two-piece steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting unit, max. load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the total vehicle length of 16,500 mm when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (test load approx. 50 t) * Tyres: 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system as per ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated by reverse gear and manually * Air suspension with lift/lower valve Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colours: * Trailer RAL 3002 carmine red * Rims silver * Curtain in RAL 9006 silver Including accessories: * 1 spare wheel holder under the loading area, right in direction of travel * 2 inch king pins * One galvanized steel headboard * Yellow-red air couplings at the galvanized connection bar at the front * 4 wheel chocks with holder at the bulkhead * 3 height wooden planks * Galvanized folding supports under the loading platform bevel * Height-adjustable tarpaulin structure approx. 3,960 mm * Galvanized headboard with tensioning mechanism for sliding curtains * EDSCHA roof, adjustable in height by approx. 400 mm, can be moved forward on aluminum roof rail profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body can be hydraulically extended at the rear to the left and right by approx. 750 mm * Sliding curtain with approx. 700 mm reserve in length, with tensioning straps spaced approx. 600 mm in height * Upper edge of body approx. 3,960 mm (loaded) * Driving with open sliding roof is not permitted and will cause tarpaulin damage * An anti-slip sand layer is painted on the checker plates on the gooseneck and the loading area * Cover plates for bridging the gap between ramps and loading area * Electro-hydraulic unit under the loading area at the rear * On the gooseneck and on the ramps left and right, each with a holder for warning signs, including socket * Control valves for the ramps located on the right side of the trailer * Grating surface in the gooseneck bevel C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating surface in the loading platform bevel...

Stav: použitý, pohotovostná hmotnosť: 14 995 kg, maximálna hmotnosť nákladu: 50 805 kg, celková hmotnosť: 65 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2023, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Rok výroby: 2023, prevádzková hmotnosť: 14 995 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and function report. Gooseneck: - Gooseneck with rear chamfer: approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading platform: - Extendable loading platform with rear chamfer: approx. 500 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 4 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table, 250 mm - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring; over the axles with checker plate covering Axles and tyres: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tools - Tyres: 235/75 R17.5 Braking system: - Braking system compliant with EU regulations, EBS-E (4S3M) Accessories included: - 2" kingpin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanised connection rail - 4 wheel chocks with holders on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Remote steering front and rear, operated by cable remote control with push buttons, axle tracking control included - Mounting point at the rear of the gooseneck for ALU loading ramps - Galvanised width extensions, extendable by approx. 230 mm per side - European reflector signs (red-yellow) at the rear of the trailer - White reflective tape to EU regulations on the sides, extension, and rear in red - At the gooseneck and rear, left and right, each with a holder for warning boards, including socket - Galvanised folding supports under the rear chamfer of the loading platform - 1 holder for a beacon at the rear of the trailer Kdsdpov Hr Axsfx Ac Iel - Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease, removable pump guard - 1 mudflap at the rear of the trailer - Operator manual and description - On the gooseneck, ALU side and rear boards, insertable approx. 2,440 x 400 mm - Rear galvanised stanchions removable (superstructure length approx. 2,560 mm) - 4 pairs WADER container locks in the loading platform for 1x 20ft, 2x 20ft, 40ft, or 45ft container - 8 pairs of pockets for stanchions 100 x 50 mm in the outer frame of the loading platform - Sliding hook rails for ALU loading ramps at the rear of the trailer - Lift axle on the leading axle, controlled by TEBS E depending on current axle load and loading status - Four slide-out warning boards approx. 423 x 423 mm extendable by approx. 400 mm, each with a position light - Holder for beacon on warning boards - Wireless remote control for rear steering in addition to cable remote, with indicator lights on the receiver as axle tracking control - Anti-slip sand layer painted on checker plate over kingpin and loading platform - 80 km/h speed sticker at rear - Load gauge for axle load determination, incl. load chart