Nízkopodlažný náves

GOLDHOFER STZ-L3-37/80A 3x gelenkt 7,5m ausziehbar

Stav: použitý, maximálna hmotnosť nákladu: 38 000 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2012, with air suspension, hydromechanical forced steering, single telescoping loading platform STZ-L Gooseneck - Robust steel welded construction - Engineered loading area 3,500 x 2,480 mm - Hydromechanical forced steering (2-circuit steering) in flat construction (height 235 mm) with adjustable guide elements - Turntable-mounted kingpin plate with replaceable 2" kingpin and adjustable steering wedge Loading Deck - Single telescoping, designed as an outer-inner tube construction with a fixed 1,000 mm long loading deck section at the front - Extension stages locked by spring-actuated cylinders and conical pins Undercarriage - 3-axle, air-suspended running gear - BPW (Eco) axle unit, consisting of three hydromechanically forced-steered steering axles - Axles with adjustable tapered roller bearings and automatic brake linkage adjusters (AGS) - Standard lift and lower valve for lowering to min. 825 mm or raising to max. 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of Vehicle - Straight design - Short 1,000 mm rear overhang measured from the center of the last axle - Rear mechanical support Braking System - 2-line full-air brake system with diaphragm actuators - Automatic load-dependent brake (ALB) - Automatic brake linkage adjusters (AGS) - Parking brake with spring actuators - Anti-lock braking system (ABS) Special Equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical Data Lodpfx Afsyxcpfj Tehf Gooseneck Loading platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height, loaded: 1,300 mm Main Deck Loading platform (LxW): 10,000 x 2,550 mm Telescopically extendable by 7,500 mm Incrementally up to (LxW): 17,500 x 2,550 mm Loaded deck height: 925 mm (+/- 100 mm) Second driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axles hydromechanically forced-steered (2-circuit steering system)

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) Lhodpfx Afeup U Hzj Tef - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: použitý, maximálna hmotnosť nákladu: 38 000 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2009, with air suspension, hydromechanical forced steering, single telescoping loading platform STZ-L Gooseneck - Robust steel welded construction - Engineered loading area 3,500 x 2,480 mm - Hydromechanical forced steering (2-circuit steering) in flat construction (height 235 mm) with adjustable guide elements - Turntable-mounted kingpin plate with replaceable 2" kingpin and adjustable steering wedge Loading Deck - Single telescoping, designed as an outer-inner tube construction with a fixed 1,000 mm long loading deck section at the front - Extension stages locked by spring-actuated cylinders and conical pins Undercarriage - 3-axle, air-suspended running gear - BPW (Eco) axle unit, consisting of three hydromechanically forced-steered steering axles - Axles with adjustable tapered roller bearings and automatic brake linkage adjusters (AGS) - Standard lift and lower valve for lowering to min. 825 mm or raising to max. 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of Vehicle - Straight design - Short 1,000 mm rear overhang measured from the center of the last axle - Rear mechanical support Braking System Lsdeyrzwtjpfx Af Tshf - 2-line full-air brake system with diaphragm actuators - Automatic load-dependent brake (ALB) - Automatic brake linkage adjusters (AGS) - Parking brake with spring actuators - Anti-lock braking system (ABS) Special Equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical Data Gooseneck Loading platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height, loaded: 1,300 mm Main Deck Loading platform (LxW): 10,000 x 2,550 mm Telescopically extendable by 7,500 mm Incrementally up to (LxW): 17,500 x 2,550 mm Loaded deck height: 925 mm (+/- 100 mm) Second driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axles hydromechanically forced-steered (2-circuit steering system)

Stav: použitý, maximálna hmotnosť nákladu: 38 000 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2009, so vzduchovým odpružením, hydromechanickým núteným riadením, jednoducho teleskopovateľnou ložnou plochou, STZ-L labutí krk - robustná oceľová zváraná konštrukcia - vytvorená ložná plocha 3 500 x 2 480 mm - hydromechanické nútené riadenie (dvojokruhové riadenie) v plochom vyhotovení (konštrukčná výška 235 mm) s nastaviteľnými vodiacimi prvkami - sedlová doska s ložiskom otočného venca a vymeniteľným 2" kráľovským čapom a nastaviteľným riadiacim klinom Ložná plocha - jednoducho teleskopovateľná, vyhotovená ako vonkajšia–vnútorná rúrková konštrukcia s 1 000 mm dlhou, pevným čelom ložnej plochy vpredu - aretácia výsuvných stupňov pomocou pružinových hydraulických valcov a kužeľového čapu Podvozok - 3-nápravový podvozok so vzduchovým odpružením Lodpfx Afjyrzv Ns Tohf - BPW (Eco) nápravová jednotka, pozostávajúca z troch hydromechanicky nútene riadených náprav s čapovým riadením - nápravy s nastaviteľnými kužeľíkovými ložiskami a automatickými napínačmi táhiel (AGS) - štandardne zdvíhací a spúšťací ventil pre zníženie na min. 825 mm, resp. zdvihnutie na max. 1025 mm - nakladacia výška 1: 885 mm - nakladacia výška 2: 925 mm Zadná časť vozidla - priamy dizajn - krátky 1 000 mm presah od stredu poslednej nápravy - mechanická podpera vzadu Brzdová sústava - dvojokruhová celopohonová tlaková vzduchová brzdová sústava s membránovými brzdovými valcami - automatická brzda závislá od zaťaženia (ALB) - automatické napínače táhiel (AGS) - parkovacia brzda pomocou pružinových valcov - ABV-brzda Špeciálna výbava - centrálne maznice "BekaMax" - elektroagregát - diaľkové ovládanie Technické údaje Labuťí krk Ložná plocha (DxŠ): 3 500 x 2 480 mm Konštrukčná výška nad sedlovým návesom: 235 mm Výška sedla zaťaženého: 1 300 mm Ložná plocha Ložná plocha (DxŠ) 10 000 x 2 550 mm Teleskopovateľná o 7 500 mm Po stupňoch do (DxŠ) 17 500 x 2 550 mm Nakladacia výška zaťaženého: 925 mm (+/- 100 mm) 2. prepravná poloha: 885 mm (+140/-60 mm) Riadenie 1. až 3. náprava hydromechanicky nútene riadená (dvojokruhové riadenie)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: Ledpfx Afoyxc Eye Tohf - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: použitý, maximálna hmotnosť nákladu: 26 700 kg, celková hmotnosť: 32 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL * Zadná korba * 2-nápravový * VIN: WSK000001270258 * Pohotovostná hmotnosť: 5 800 kg * Užitková hmotnosť: 26 700 kg * Celková hmotnosť: 32 500 kg * Zaťaženie oja: 26 700 kg * Zaťaženie náprav: 9 000 / 9 000 kg * Dĺžka návesu: 8 775 mm Ljdjlhp Rzjpfx Af Tshf * Šírka návesu: 2 550 mm * Výška návesu: 3 280 mm * Pneumatiky: 385 / 65 R 22,5 * Cena na vyžiadanie * Všetky údaje bez záruky * Interné číslo: 0376 Tel./WhatsApp:

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: WLAST300000A72224, pohotovostná hmotnosť: 13 880 kg, prvá registrácia: 08/2023, ďalšia kontrola (TÜV): 12/2026, celková dĺžka: 17 100 mm, celková šírka: 2 550 mm, celková výška: 3 750 mm, Rok výroby: 2023, LANGENDORF semi low-loader with wheel recesses in drivable version, Type SATÜV 30 - 8,900 mm + 4,200 mm extendable, suitable for a three-axle tractor unit 6x4, wheelbase 3,300 mm, "A" dimension max. 5,000 mm. Rear loading ramps: L x W 2,950 + 1,700 x 700 mm, automatically widening Permissible trailer gross weight: 48,000 kg Permissible fifth wheel load: approx. 18,000 kg Permissible trailer axle load: 30,000 kg Unladen weight: approx. 14,000 kg Payload with uneven load distribution: approx. 34,000 kg Gross train weight acc. to StVZO: 40,000 kg Unladen weight of tractor unit (depending on type): approx. 9,500 kg Unladen weight of semi low-loader: approx. 14,000 kg Payload acc. to StVZO: 16,500 kg Gross train weight with special permit acc. to §29: 41,800 kg Unladen weight of tractor unit (depending on type): approx. 9,500 kg Unladen weight of semi low-loader: approx. 14,000 kg Payload with special permit acc. to §29 (indivisible load): approx. 18,300 kg Gross train weight with special permit acc. to §70: 56,000 kg Unladen weight of tractor unit (depending on type): approx. 9,500 kg Unladen weight of semi low-loader: approx. 14,000 kg Payload with special permit acc. to §70 (indivisible load): approx. 32,500 kg Dimensions: king pin to rear end of vehicle approx. 11,500 mm Loading length incl. 600 mm drive-on slope: 8,900 mm Extendable by 4,200 mm to 13,100 mm Deck loading length: 3,500 mm Loading width: 2,550 mm Loaded platform height at full load incl. 10 mm wood floor projection above outer frame: approx. 910 mm Axle spacing: 2,260 mm - 1,410 mm Ljdpfsywniujx Af Tohf Coupling height loaded: 1,250 mm