Pracovná plošinová náves

FAYMONVILLE Telemax Megatrailer - hydr. gelenkt

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: Isdpfjiu Er Aex Ab Detl - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: veľmi dobrý (použitý), prvá registrácia: 09/2015, dĺžka ložného priestoru: 20 180 mm, šírka ložného priestoru: 3 000 mm, farba: iný, Rok výroby: 2015, Poškodenia: žiadne YAFTL2007F0017329 = Ďalšie informácie = Prevádzková hmotnosť: 13 600 kg Nosnosť: 28 400 kg Celková povolená hmotnosť: 42 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Cena: na vyžiadanie ŠPZ: DW205AH = Firemné informácie = V prípade akýchkoľvek otázok alebo návrhov nás neváhajte kontaktovať. Zaručujeme odpoveď do 8 hodín. Ceny sú uvedené bez DPH. Z poskytnutých informácií nemožno odvodiť žiadne práva. Kancelársky telefón: Mobil: (Holandsky - Anglicky - Nemecky - Francúzsky - Španielsky - Taliansky) Dostupné na WhatsAppe a Viberi. Itedpfx Abeymrb Sj Dol Mobil: (Holandsky) Dostupné na WhatsAppe a Viberi. Pri platbe bankovým prevodom je potrebné zaslať peniaze na náš bankový účet uvedený nižšie. Vždy si overte platobné údaje, ktoré sú uvedené na našej webovej stránke. Ak ste obdržali iné informácie, kontaktujte nás. Ak máte akékoľvek pochybnosti, zavolajte nám, aby sme mohli overiť faktúru a/alebo platbu. Bankové údaje: Rabobank Laan van Limburg 2 4701 BP Roosendaal IBAN: NL 89 RABO EORI/DIČ/DPH: NL857401B(01) BIC/SWIFT: RABONL2U

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: > 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Iodpjl Uxdkofx Ab Djtl Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 8 000 kg, maximálna hmotnosť nákladu: 30 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2005, dĺžka ložného priestoru: 13 700 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 385.65 r 22.5, farba: tmavočervená, Rok výroby: 2005, Výbava: ABS, sem technokar plošinový náves s 5 naklápacími hydraulickými ramenami na prepravu plechov a šikmých panelov, 3 nápravami s kotúčovými brzdami, tretia náprava riadená, EBS, vzduchové odpruženie, rok výroby 2005, nerezové boxy, elektrická ovládacia zásuvka, skryté kotviace háky, fixačné čapy na plechy, predajca INTERDRIVE SRL-PARMA Ijdjt Twlnspfx Ab Detl

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/2015, celková dĺžka: 13 800 mm, celková šírka: 2 550 mm, celková výška: 2 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70R17.5, rázvor náprav: 10 520 mm, farba: modrá, Rok výroby: 2015, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = Itsdjzn Hgkopfx Ab Dol - Toolbox - Centrálne mazanie = Poznámky = Nooteboom Euro 38-02 Odnímateľný čelný ťah. Predĺžiteľný. Odnímateľný nosník/rám. Diaľkové ovládanie. Dĺžka nákladového priestoru: 625 cm + 465 cm. Šírka nákladového priestoru: 254 cm – 299 cm. Výška nákladového priestoru: 43 cm. = Ďalšie informácie = Rozmer pneumatiky: 245/70R17.5 Brzdy: Bubnové brzdy Odpruženie: Vzduchové odpruženie Zadná náprava 1: Dvojité pneumatiky; riadená; stav pneumatiky vľavo, vnútri: 50 %; stav pneumatiky vľavo, vonku: 50 %; stav pneumatiky vpravo, vnútri: 50 %; stav pneumatiky vpravo, vonku: 50 % Zadná náprava 2: Dvojité pneumatiky; riadená; stav pneumatiky vľavo, vnútri: 50 %; stav pneumatiky vľavo, vonku: 50 %; stav pneumatiky vpravo, vnútri: 50 %; stav pneumatiky vpravo, vonku: 50 % Cena: Na vyžiadanie Typové označenie: EURO-38-02 / AGRI / EXTENDABLE / = Informácie o firme = VŠETKY CENY SÚ UVEDENÉ V NETTO CENE PRE EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Hovorme po rusky. Snažíme sa poskytovať čo najpresnejšie informácie. Napriek tomu z uvedených textov nemôžu vyplynieť žiadne nároky.

Stav: použitý, najazdené kilometre: 544 354 km, prvá registrácia: 12/2016, typ paliva: nafta, palivo: nafta, Rok výroby: 2016, Mercedes Actros 4163 LS 8x4 GIGA Space heavy-duty tractor unit, 160 tonnes gross train weight FULLY EQUIPPED 18 months ago: Original Mercedes replacement engine, replacement transmission, new intarder/retarder, and clutch!!! ● 6-cylinder Euro 6 engine with 460 kW / 630 HP ● Displacement: 15,569 cm³ ● Axle configuration: 8x4 ● Wheelbase: 3,900 mm ● Leaf suspension (1st and 2nd axles) / air suspension (3rd and 4th axles) ● 250 tonnes gross train weight ● Intarder/retarder ● Reinforced automatic transmission with turbo retarder clutch ● ASR / deactivatable ● Differential lock ● Hill start assist ● Automatic climate control ● Stationary air conditioning ● Auxiliary heater ● Adaptive cruise control ● Lane assist ● Emergency brake assist ● GIGASPACE comfort cab with 2 bunks/beds and seating area ● Air horns ● Light bar with 4 work lights ● 2 fuel tanks ● Cab spoiler ● Sliding fifth wheel ● Multifunction steering wheel ● Large navigation system ● CB radio ● Tyres: 385 / 65 R 22.5 (1st + 2nd axles) ● 315 / 80 R 22.5 (3rd + 4th axles) Itedpfxjyutkdj Ab Del - One owner! - German vehicle! - HU / TÜV / SP: new! Errors and prior sale excepted! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for more information.

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg Iedpoya E A Nsfx Ab Dstl - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, celková hmotnosť: 43 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross members, designed for high point loads * Underride guard, width approx. 700 mm * Outer frame as UNP-profile * Fifth wheel plate approx. 8 mm * Neck height at front approx. 130 mm Coupling device * 2-inch king pin Underride protection * Bolted design, compliant with EU standards Side underrun protection * Compliant with EU standards, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensation foot and single-sided operation on the right side Axles * 3 x 9 t air suspension axle units, 22.5'' disc brakes * Total lift approx. 180 mm * Lifting/lowering device via rotary valve Brake system * Two-line compressed air braking system according to EU standards with EBS and RSS, automatic load-dependent regulation * Spring-loaded cylinders as parking brake * Anti-mistake coupling heads fixed to the front cross member, without connection line to the towing vehicle Tyres * 6-fold, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand at our discretion * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * According to EU standards Spare wheel holder Without Load securing * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.0 t * Drilled holes in the outer frame approx. every 400–600 mm for attaching lashing straps Front wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inside lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor, recessed into the outer frame with galvanised omega steel profiles Lighting system * According to EU regulation, 24 Volt, multi-chamber lights * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * Lane marker lights, LED Itedow U H Sbjpfx Ab Djl * 1x15- and 2x7-pin sockets on front cross member Equipment * 2 wheel chocks, with holder * ECE 70 warning plates * Holder for rotating beacon, incl. rotating beacon * 2 rubber bumpers at rear * Folding and extendable rear right access ladder (without platform) * 1 open box made from perforated sheet metal, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, mounted behind the axles Paintwork * Front wall: RAL, single colour, as desired * Chassis: Hot-dip galvanised * Outer frame hot-dip galvanised + RAL single colour as desired * Centre stanchions RAL single colour as desired * SSV: aluminium anodised * Underride guard: white (RAL 9016 traffic white) * Add-on parts: galvanised/KTL black * Rims: silver Conspicuity marking * Complete, yellow Including special accessories * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of crosswise stake pockets on the loading platform * 20 pieces of stakes made from galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stakes mounted inside the front wall * 5 x 25 mm drop and rear boards, made from anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip side stanchions * Board and stake magazine: left and right chassis i

Stav: nový, maximálna hmotnosť nákladu: 29 831 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, Kässbohrer Mega Platform Semi-Trailer Immediately Available TECHNICAL DATA: * K.SFS M / 90 - 12 / 27 DE * Fifth Wheel Height: 950 mm Itsdpor Ivwvofx Ab Dsl * King Pin Load Capacity: 15,000 kg * Axle Load: 27,000 kg * Gross Vehicle Weight: 42,000 kg * Overall Length: 13,680 mm * Internal Length: 13,610 mm * Overall Width: 2,550 mm * Internal Width: 2,480 mm * Wheelbase: 7,700 mm * Gooseneck: 90 mm * Unladen Weight ±3%: 6,169 kg CHASSIS: * Manufactured from high-quality, high-tensile S460 MC steel * KTL coated and painted * K-Fix (holes in the outer frame, load capacity 2.5 tonnes) * 3 x 9 tonne BPW EAC (ECO Air Compact) axles with disc brakes * 1st axle liftable, automatic * Wabco brake system * Air suspension with lift and lower valve * Tyres: 6 x 445/45 R19.5 * Mechanical landing gear by JOST * 30 mm phenolic resin-coated plywood floor with a forklift axle load of 8,000 kg according to EN 283 * KTL-coated steel front wall plate with internal plywood protection, 2,000 mm high ADDITIONAL FEATURES: * Front wall height: 2,000 mm * 1 x steel toolbox with PVC coating, 1,500 mm wide, mounted in front of the axles * 2 x 4 RoRo rings according to EN 29367-2 * 13 x 2 lashing rings with 2-tonne capacity in the floor and 7 x 2 lashing rings with 5-tonne capacity in the side frame * 7 x 2 stake pockets on the outer frame and 5 stake pockets centrally * Additional 2 x 2 stake pockets at the front * 4 x 2 container twistlocks for transport of 1 x 40 ft or 2 x 20 ft containers * Oversize plates (LED) * 7 x 2 lashing points on the outer frame with 1-tonne capacity * Stake storage box on the front wall COLOURS: * Chassis colour: RAL 3020 Traffic Red * Front wall colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 06/2022, dĺžka ložného priestoru: 11 060 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 1 500 mm, celková dĺžka: 113 500 mm, celková šírka: 2 480 mm, celková výška: 1 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65/22.5, farba: červená, Rok výroby: 2022, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Vzduchové odpruženie - Centrálne mazanie = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 385/65/22.5 Značka náprav: SAF Brzdy: bubnové brzdy Odpruženie: vzduchové odpruženie Zadná náprava 1: Max. zaťaženie nápravy: 10 000 kg Zadná náprava 2: Max. zaťaženie nápravy: 10 000 kg; Riadená Zadná náprava 3: Max. zaťaženie nápravy: 10 000 kg; Riadená Hmotnosti Prevádzková hmotnosť: 8 370 kg Užitočná nosnosť: 39 630 kg Celková povolená hmotnosť: 48 000 kg Funkčné Výška ložnej plochy: 150 cm Stav Technický stav: veľmi dobrý Itjdpfov I R N Tsx Ab Dsl Optický stav: veľmi dobrý NOOTEBOOM OVB-48-03 3-NÁPRAVOVÝ NÍZKY NÁVES VZDUCHOVÉ ODPRUŽENIE SAF NÁPRAVY 2. A 3. NÁPRAVA OVLÁDANÁ ELEKTROHYDRAULICKÝM PRÍDAVNÝM RIADENÍM DIAĽKOVÉ OVLÁDANIE CENTRÁLNE MAZANIE DĹŽKA=1106CM ŠÍRKA=250CM 34x KOTVIACE OČKÁ DO PODLAHY 20x RONGPALOV