Nízkopodlažný náves

MEUSBURGER MPG 3 Tieflader Plane verbreiterbar

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Fgodpfxoiu Eu Ns Am Sjb Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: použitý, pohotovostná hmotnosť: 8 006 kg, maximálna hmotnosť nákladu: 26 994 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2021, zavesenie: vzduch, veľkosť pneumatiky: -, Rok výroby: 2021, Výbava: ABS, zdvíhacie čelo, ref: LOC-VO21-557-A Umiestnenie? Polopríves - skriňový (Schmitz, Krone alebo Fruehauf) od 680 €/mesiac bez DPH Technické parametre: Schmitz Cargobull SKO 24 (2021) Konfigurácia: 3 nápravy Vzduchové odpruženie Zosilená podlaha Dostupnosť a podmienky prenájmu: Krátkodobý alebo dlhodobý prenájom Servis a asistencia v cene Možnosť prispôsobenia podľa vašich požiadaviek Kontaktujte nás ešte dnes pre viac informácií a získajte individuálnu cenovú ponuku! Zdvíhacia náprava Informácie o pneumatikách: 385/65 R22.5 160J Fgodov E Rkxepfx Am Ssb Plocha: 35,445 m² Šírka: 2,55 m Výška: 4 m Objem: 141,78 m³ Zdvíhacie čelo Typ zadných dverí: dvojkrídlové ABS Výrobné číslo: WSM00000703

Stav: nový, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 12 000 kg, dovolené zaťaženie nápravy (náprava 2): 12 000 kg, povolené zaťaženie nápravy (náprava 3): 12 000 kg, celková dĺžka: 9 300 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R17.5, rázvor náprav: 1 360 mm, farba: modrá, Rok výroby: 2023, Výbava: zdvíhacie čelo, Farba: Modrá Nosnosť: 54 465 kg Hlavné vlastnosti: Výrobca: Faymonville Model: MAX 110-Z-4AA-9.30-U Číslo podvozku: YAMT14XX4N0107629 Rok výroby: Nový, nepoužívaný Hmotnosti/Nosnosť: Zaťaženie na ťažný čap: 23 000 kg Zaťažiteľnosť náprav: 12 000 kg Celkové zaťaženie náprav: 48 000 kg Celková prípustná hmotnosť (GVW): 71 000 kg Pohotovostná hmotnosť: 16 535 kg Užitočná nosnosť: 54 465 kg Nápravy: Značka náprav: BPW Hydraulické riadenie Vzduchové odpruženie s možnosťou zdvíhania a spúšťania Brzdový systém WABCO Pneumatiky: 245/70 R17.5 – Michelin (zaťažovací index 146/146 F) Prvá náprava zdvíhacia Rozmery: Dĺžka ložnej plochy: 9 300 mm Predlžovanie: 6 500 + 6 800 mm Šírka ložnej plochy: 2 540 mm Výška nakladania: 900 mm Ďalšie informácie: Dvojito vysúvateľná ložná plocha Kontajnertové zámky Výsuvné bočné podpery + drevené výsuvy na rozšírenie do šírky Kotviace oká Súprava dvoch skladacích nákladových rámp Centrálne mazanie 1x rezervné koleso s držiakom Podpery JOST Elektrická inštalácia 24 V Fsdpfx Asuu Hcfem Sogb King-pin 2.0" (ťažný čap) Jeden pozinkovaný oceľový čelník Elektricky poháňané hydraulické čerpadlo Ručné riadenie Twist locky = Ďalšie informácie = Všeobecné údaje Rok výroby: 2023 Konfigurácia náprav Rozmer pneumatík: 245/70 R17.5 Odpruženie: vzduchové Zadná náprava 1: Dvojmontáž; zdvíhacia náprava; max. zaťaženie: 12 000 kg; riadená; značka náprav: BPW; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 2: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 3: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 4: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Hmotnosti Pohotovostná hmotnosť: 16 535 kg Nosnosť: 54 465 kg Celková prípustná hmotnosť: 71 000 kg Funkčnosť Výška ložnej plochy: 900 mm Predlžovacia nadstavba: Áno Stav Všeobecný stav: veľmi dobrý Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Finančné informácie Cena: na vyžiadanie Dodatočné informácie Pre ďalšie informácie kontaktujte pána Stefana Schaapvelda.

Stav: nový, maximálna hmotnosť nákladu: 31 500 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, Výbava: ABS, Wiese 3-axle semi-trailer with lift table and folding rear section. Fsdpfx Aovw Hmtom Sjgb Perfect for transporting forklifts and/or work platforms. Technical specifications: - 3 x 10 t axles - Lift axle - Steering axle with Smart Steering (steers both forward and backward) - Outer beam chassis with inclined frame - Neck construction rated for 18 t, suitable for 2- and 3-axle tractor units - Hydraulic lift table adjustable to 3 positions - Rear in folding tail design with hydraulic extensions, usable as drive-on ramps, bridging ramp, or loading platform (overall length reduced with rear upright) - Remote control for ramps and lift table - Front wall - Grating floor - Numerous lashing points - SmartBoard - Central lubrication system - Steel construction, shot-blasted, hot-dip galvanized and painted Various optional extras available: For example: - Winch - Toolbox on fifth wheel step - Alloy wheels Further information on request.

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Fgjdpetphtmefx Am Ssb Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: použitý, najazdené kilometre: 370 700 km, výkon: 375 kW (509,86 k), prvá registrácia: 01/2023, typ paliva: nafta, pohotovostná hmotnosť: 8 117 kg, maximálna hmotnosť nákladu: 9 883 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 4x2, rázvor náprav: 3 600 mm, farba: červená, kabína vodiča: iný, typ prevodu: poloautomatický, emisná trieda: Euro 6, zavesenie: vzduch, počet sedadiel: 2, Výbava: ABS, klimatizácia, nezávislé kúrenie, nízka hlučnosť, palubný počítač, systém kontroly trakcie, tempomat, uzávierka diferenciálu, Curb weight: 8,117 kg, permissible total weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/65 R22.5, air suspension front and rear, retarder, digital tachograph, fifth wheel: JOST JSK 42 K0, Electronic Braking System (EBS), Electronic Stability Program (ESP), Traction Control (ASR), Climatronic, stationary air conditioning, air-suspended driver's seat, driver's armrest, ride height control, LED headlights, automatic driving lights, headlight range adjustment, MAN Media Truck Advanced, digital radio reception (DAB), sound system, power steering, adjustable steering column, electric windows, roof hatch, outside temperature display, fog lights, electric exterior mirrors, kerb mirror, wide-angle mirror, immobiliser, tinted windows, sun visor, aero package, refrigerator box, beacon, axle load display, work lights, LED daytime running lights, cup holder, EfficientLine package, cornering light, rubber floor covering, insulated cab, telematics system, light sensor, smartphone app integration, speed limiter, storage box, suspended cab. Errors and changes excepted. Next service dates per on-board computer: coolant and steering oil: 11/2026, S12: 12/2026, engine oil: 04/2027, axle oil: 11/2027, transmission oil: 10/2028. Brake pads: FA: 42%–38%, RA: 39%–43%. Vehicle has 48 months full vehicle warranty until 01/2027! Fgjdpfx Asx Nktasm Ssb

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 08/1994, farba: žltá, Rok výroby: 1994, Výbava: ABS, = Ďalšie možnosti a výbava = - Vzduchové odpruženie = Ďalšie informácie = Konfigurácia náprav Zadná náprava 1: Dvojmontáž Zadná náprava 2: Dvojmontáž Zadná náprava 3: Dvojmontáž; Riadená Zadná náprava 4: Dvojmontáž; Riadená Hmotnosti Pohotovostná hmotnosť: 11 420 kg Funkčné údaje Výška ložnej plochy: 77 cm Výsuvná nadstavba: Áno Stav Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Finančné informácie Cena: na vyžiadanie NOOTEBOOM OSD-50-04-V POLONÍZKOPODLAŽNÝ NÁVES Fsdsuxy Dfopfx Am Sogb 4x SAF NÁPRAVY 2x RIADENÁ NÁPRAVA (NÁBĚHOVÁ) VZDUCHOVÉ ODPORUŽENIE ROZMER PNEUMATÍK 205/65/R17.5 VÝSUVNÁ NAKLADACIA PLOŠINA DĹŽKA 923 CM + 670 CM VÝSUV, CELKOVÁ DĹŽKA NAKLADACEJ PLOŠINY 1 593 CM ŠÍRKA NAKLADACEJ PLOŠINY 275 CM + 2x 27,5 CM BOČNÉ ROZŠÍRENIE, CELKOVÁ ŠÍRKA NAKLADACEJ PLOŠINY 330 CM VÝŠKA NAKLADACEJ PLOŠINY ±77 CM ZAŤAŽENÁ LABUŤIA ŠIJA 388 CM DĹŽKA HÁKOVÉ OKÁ A VLOŽKY RONG 2x PODPERA ZADNÁ SLEDUJTE NÁS NA INSTAGRAME: GEURTSTRUCKS HOVORÍME PO NEMECKY HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stav: nový, maximálna hmotnosť nákladu: 30 540 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 550 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 2 990 mm, celková šírka: 2 550 mm, celková výška: 1 010 mm, Rok výroby: 2025, Výbava: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMI-TRAILER RH100 - EXTENDABLE - For construction material and construction equipment transport, NEW VEHICLE Gross vehicle weight (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Unladen weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Extension length approx. 4,000 mm, lockable in increments of 500 mm Reinforced version for building material transports, 20 t/5m at crane center, construction equipment transport up to 20 t (in retracted position) Reinforced external U-profile frame 6 mm Conical cross beams 4 mm Frame tapering at rear, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at the front left of the coupling Energy guide chain in the central frame Frame locking with integrated greasing strip 4 pairs of extendable 8 t lashing rings, 9 pairs of 10 t lashing rings on the outer frame profile at the rear, extendable and foldable outward both sides for oversize cargo lashing 10 pairs of lashing studs with welded round steel on the lower outer frame 6 pairs of insert sockets with reinforcement bracket for shaped tube stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), both sides on the outer frame 3 insert socket cross supports for shaped tube stanchions 80x80 mm, positioned at center cross beams Insert socket cross supports as holders for shaped tube stanchions 6 pairs of recessed container locks for: - 2 x 20 ft containers - 1 x 20 ft container centered - 2 x 20 ft containers - 1 x 30 ft container Reinforced rear end plate with continuous mounting rail for drive-on ramps Mechanical 2 x 12 t landing gear, single-side operation + compensating mechanism 2 drop-down support legs at the rear SAF Intradisc-B9 axles with disc brakes Ø370 mm (19.5'' disc), load capacity 9 t/axle, on-road version Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm SAF trailing axle with king pin/low-friction joint, approx. 10° steering angle, electropneumatic reverse lock automatically switched in reverse, additional cab switch with release valve Special axle lift on 1st axle, automatically raises/lowers by load, with forced lowering, start assist button in cab / '3 x braking' Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system complying with EC directives 71/320 ECE R13 2-circuit air brake system, EBS module 2S2M, one axle sensored RSS/RSP - Stability program Spring-loaded parking brake Steel air reservoir Air suspension with lifting and lowering, total stroke approx. 200 mm Automatic driving level 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, 'BASIC' package Axle load display via EBS CANbus signal Tire pressure monitoring according to ECE directive 141 Fgedpfxjwfu N Re Am Ssb 35 mm timber floor, longitudinal over wheels, steel checker plate covering Timber floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes on top of corner posts Front steel corner posts integrated in front wall, front side (free side loading length) 24-volt lighting system in accordance with EC directives 76/756/EEC 2 full-LED multi-chamber tail lights "Aspöck" with int

Stav: nový, maximálna hmotnosť nákladu: 36 461 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 480 mm, celková výška: 860 mm, Rok výroby: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Fgsdpfx Aow Dl Hwsm Seb Loading Platform: Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN). 1 pair of fold-out lashing rings on the inside at the front center beam (LC 10,000 daN). Grating surface C40/4 (point load 2.3 tons on an area of 20 x 20 cm), tread plate covering above the axles. Two-Part Steel Ramps: One pair of galvanized two-piece steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 tons on an area of 20 x 20 cm). Ramp with hydraulically folding ramp sections, hydraulic lifting device. Maximum load per pair: 40,000 kg. According to Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm in transport position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load). Tyres: 235/75 R17.5 3PMSF tyres as per manufacturer's choice. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle is via the standard EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting. All LED side marker lamps flash with the indicator. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Curtainsider Body (Tarp Body): Curtainsider body approx. 3,960 mm - Galvanized front wall with tensioning mechanism for sliding curtains. - Roof by "EDSCHA" brand, forward-sliding on aluminium roof rail profiles (bolted to front and rear walls). - 3 pairs of movable stanchions in the loading area. - Rear hydraulically extendable left and right by approx. 750 mm. - Sliding roof with foldable portal support. - Sliding curtain with 700 mm reserve length, lashing straps at approx. 600 mm intervals. - Height of upper edge (loaded): approx. 3,960 mm. - Driving with open sliding roof is not permitted and will damage the tarp. Paintwork: Entire steel structure is automatically shot-blasted using a turbine after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection. Final coating with 2 coats of 2K finish paint, single color in a shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, farba: biely, 7,45 BDF Krone Jumbo Smooth-Sided Swap Body, used Exterior colour: White Parking height adjustable from 920 to 1320 mm. The swap body is watertight and the roller door operates smoothly. Forklift pockets Stackable Approximate external dimensions (in mm): Length 7450 Width 2550 Height 2950 Approximate internal dimensions (in mm): Length 7289 Width 2470 Height 2700 Door openings (in mm): Width 2370 Height 2550 Lashing: Keyhole Weight: Tare 3340 kg Maximum payload: 12660 kg Gross weight: 16000 kg Floor load capacity: 5460 kg Volume: 49.74 m³ Pallet capacity (in mm): Euro 800x1200: 18 Fodpfx Amouvibtj Segb Metric 1000x1200: 14 Cage box 835x1240: 16 “Aussie” 1170x1170: 12 Note: Actual dimensions and other specific details may vary slightly from the above specifications due to ongoing product improvements.