Nízkopodlažný náves

SCHWARZMÜLLER RH240 Jumbo Plateau Tieflader ausziehbar

Stav: nový, celková hmotnosť: 36 700 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Schwarzmüller RH240 Jumbo Flatbed Semi-Trailer Low Loader extendable/ telescopic – for building material and construction machinery transport - NEW - UNUSED - GVW 36,000 kg Tare weight 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at the lower deck approx. 2,540 mm Loading height in the lowbed (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, operated from the trailer, with additional position for 40ft container in the lowbed Reinforced design for building material transport, rated for 20 t on 5 m at the centre of gravity, and suitable for construction machinery transport up to 20 t Frame suitable for the transport of timber elements L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear at support blocks Reinforced outer frame at dropped deck 6 mm Reinforced outer frame at lowbed 6 mm Tapered cross members Sliding intermediate bearing approx. 300 mm (non-removable), mechanically lockable, designed as stake pocket cross member for square tube posts 80x80 mm; plus 1 pair 5 t lashing rings integrated on the outer side of the intermediate bearing Frame for 2-axle tractor unit and coupling height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor unit 3 pairs front and 10 pairs rear, 10 t retractable lashing rings on both sides of the outer frame, also foldable outward for oversize securing 10 pairs of lashing eyes with welded round steel at the lower outer frame Frame attachments: 10 pairs of socket housings with reinforcement for 80x80 mm square tube posts, on both sides of the outer frame 6 stake pocket cross members for 80x80 mm square tube posts 24 steel square tube side posts 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes on top for tension straps, hot-dip galvanized 3 pairs of container locks in the lowbed platform, recessed, for: - 1 x 20ft container - 1 x 30ft container - 1 x 40ft container (when extended) U-profile guide for loading ramps at frame end Support equipment: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at the rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear Last axle is trailing-steered Brake system / Suspension: Brake system by Wabco Brake/air connections with 2 single-coupling heads, yellow/red, EBS/ABS socket at front Air suspension with lifting and lowering function, total lift approx. 200 mm Automatic level adjustment to the programmed ride height from 15 km/h Assistance / Safety Systems: Standard reporting interval: - every 15 minutes with ignition on - every 24 hours with ignition off Axle load display via EBS CAN bus signal for display in the cab (truck must be suitably prepared) Wabco SmartBoard for reading out data via display (mileage, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch wood floor, impregnated on both sides, longitudinally laid with small gaps, wheel arches covered with steel chequer plate Front wall: Csdpfxju A Nile Am Sjrb Fixed profiled steel front wall, approx. 2,700 mm high, with 2 centre supports 2 front corner posts integrated in the front wall, bolted at the end face 2

Stav: použitý, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/2022, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2022, Výbava: ABS, 4-AXLE LOWBED SEMI-TRAILER WITH CRANKED PLATFORM Tractor Unit Data and Equipment: 3-axle tractor unit Please check fifth wheel height under the 'Dimensions' section! No modifications to the tractor unit Notes: 5,000 mm = maximum distance from the front edge of the tractor unit to the fifth wheel centre 1,730 mm = minimum clear distance in front of the fifth wheel centre 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted) 40 t Gross weight (technical) 58 t Axle group load (technical) 40 t King pin load (technical) 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform - flat loading area Approx. 730 mm = rear drive-on ramp Total width approx. 2,550 mm (with extensions approx. 3,000 mm) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm At unloaded fifth wheel height approx. 1,250 mm Please observe legal maximum total height and total train length when combining the vehicle! Steel welded construction with front angled frame neck and rear taper (without central excavator shovel recess) 5 pairs of pockets in the low bed for 100 x 50 mm rectangular stanchions 4 pairs of lashing brackets on the outer frame 2 pairs of 5t lashing rings under the outer frame between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical tensile force) in the low bed + 1 pair foldable between the 2nd and 3rd axle 1 pair recessed, retractable 10t lashing rings on the front cranked slope Pair of recessed, foldable 10t lashing rings on the inner side of the main beam after the 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inner side of the main beam after the front neck Interchangeable 2" king pin 5 pairs of steel rectangular stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion lock with pressure operation # permissible stanchion load 1,000 kg/stanchion at 500 mm above ground level load application point Pull-out extensions on both sides of the low bed platform with 50 mm softwood planks (the track width of construction equipment to be transported must not exceed the frame width of 2,550 mm) Mechanical steel landing gears, 2 x 12 t, single-sided operation (right), stroke equalization, make as per factory choice 2 hydraulic supports at the rear – individually operated, controls housed in a separate stainless steel box underneath AF air suspension lowbed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters Codpfx Aeu Uzv Eom Sjrb Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axles as stub-axle/steering knuckle-controlled SAF trailing axle, approx. 20° steering angle, electro-pneumatic automatic reverse lock via reverse gear, additionally with switch in driver’s cab and release valve on the trailer Start-assist on 1st axle = speed-controlled pressure relief, can be relieved when loaded, for push-button operation in driver's cab Mechanical odometer, mounted on 2nd axle, right side in driving direction 16 tyres 245/70 R 17.5, 146/146F, (tyre load capacity 12t/axle) 16 steel rims 6.75 x 17.5, with offset, silver (tyre load capacity 12t/axle) 1 tyre 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity 12t/axle) 1 steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" performance package ... further details on request! Cu