Nízkopodlažný náves

SCHWARZMÜLLER RH240 Jumbo Plateau Tieflader ausziehbar > NEU <

Schwarzmüller RH240

Jumbo Flatbed Semi-Trailer Low Loader

extendable/ telescopic – for building material and construction machinery transport

- NEW - UNUSED -

GVW 36,000 kg
Tare weight 10,340 kg

Internal length approx. 13,570 mm =
Front platform length approx. 3,950 mm
Rear platform length approx. 9,620 mm

Platform width at the lower deck approx. 2,540 mm

Loading height in the lowbed (unladen) approx. 830 mm


Frame:
Extendable central frame welded construction

Extension length 6,000 mm

Pneumatically lockable, operated from the trailer, with additional position for 40ft container in the lowbed

Reinforced design for building material transport, rated for 20 t on 5 m at the centre of gravity, and suitable for construction machinery transport up to 20 t

Gkjdpfju A Nilox Abtod
Frame suitable for the transport of timber elements L/W/H approx. 13,000/575/3,200 mm

Reinforced frame for point loads front and rear at support blocks

Reinforced outer frame at dropped deck 6 mm

Reinforced outer frame at lowbed 6 mm

Tapered cross members

Sliding intermediate bearing approx. 300 mm (non-removable), mechanically lockable, designed as stake pocket cross member for square tube posts 80x80 mm; plus 1 pair 5 t lashing rings integrated on the outer side of the intermediate bearing

Frame for 2-axle tractor unit and coupling height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor unit

3 pairs front and 10 pairs rear, 10 t retractable lashing rings on both sides of the outer frame, also foldable outward for oversize securing

10 pairs of lashing eyes with welded round steel at the lower outer frame


Frame attachments:
10 pairs of socket housings with reinforcement for 80x80 mm square tube posts, on both sides of the outer frame
6 stake pocket cross members for 80x80 mm square tube posts
24 steel square tube side posts 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes on top for tension straps, hot-dip galvanized
3 pairs of container locks in the lowbed platform, recessed, for:
- 1 x 20ft container
- 1 x 30ft container
- 1 x 40ft container (when extended)

U-profile guide for loading ramps at frame end


Support equipment:
Mechanical steel landing gears, 2 x 12 t
2 drop-down supports, both sides at the rear frame


Wheels:
Tyres 205/65 R 17.5
Steel rims 6.00 x 17.5


Axles:
SAF low loader axles with drum brakes
Axle lift on 1st axle
Axle spacing 1,310 + 1,410 mm
Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear
Last axle is trailing-steered


Brake system / Suspension:
Brake system by Wabco
Brake/air connections with 2 single-coupling heads, yellow/red, EBS/ABS socket at front
Air suspension with lifting and lowering function, total lift approx. 200 mm
Automatic level adjustment to the programmed ride height from 15 km/h


Assistance / Safety Systems:
Standard reporting interval:
- every 15 minutes with ignition on
- every 24 hours with ignition off
Axle load display via EBS CAN bus signal for display in the cab (truck must be suitably prepared)
Wabco SmartBoard for reading out data via display (mileage, axle aggregate load, brake diagnostics, etc.)


Floor:
35 mm larch wood floor, impregnated on both sides, longitudinally laid with small gaps, wheel arches covered with steel chequer plate


Front wall:
Fixed profiled steel front wall, approx. 2,700 mm high, with 2 centre supports
2 front corner posts integrated in the front wall, bolted at the end face
2

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.