Müller-Mitteltal T3 Tiefl., Verz., Baggerstiel, Hydr. Klapprampen kúpiť použité (4 624)

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning sign packages front & rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (mounted at rear) * Drawbar with 40 mm towing eye, height adjustable via tension spring & turnbuckle * 4 stake pockets per side (stakes not included) with integrated lashing options Nledpfjq Dyv Iox Apajc * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on main frame of bogie platform * 5 pairs UVV-certified swiveling and retractable lashing rings * Loadable in all directions and recessed into outer frame corners: 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not in rear taper) * Extension planks stored in a compartment under the loading area * Excavator arm rest over rear axle up to rear cross-member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings mounted on excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic ramp sideways shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to 140 l/min), dual-line hydraulics * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm sloped approach) * Loaded deck height approx. 860 mm +/- 30 mm compensating unit * Chassis, bogie, folding outriggers, drop-down rear supports, and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics Nlsdpjtplwfsfx Apaec * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle Nljdpfx Asx Ipbgopajc * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) Nledpjx Ipb Hsfx Apajc * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring and turnbuckle ----Lighting / Electrical: * RDÜ tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Removable revolving beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel mud flaps, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for tool box on the turntable platform * 4 stake pockets on each side (stakes not included) with lashing possibilities ----Load securing (La-Si package including): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame * 13.4 t load capacity at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanically folding extension arms for a total width of 3 meters (not in the rear slope) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways Nljdpfx Asl Th I Ajpasc * 4-way control block for retrofit of hydraulic side ramp displacement ----Loading area: * Above turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points Nsdpjl Th Nnofx Apaslc ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical connectors * Four stake pockets per side, each with dual 2 t lashing points * Load security package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – in the corners up to 13.4 t, elsewhere up to 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm), adjustable sideways * Excavator arm trough from rear axle to rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Nsdpfxel Tpwyo Apajlc * Loading height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame Nljdpjl Thxdsfx Apaoc * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve Nledpfol Tik Nox Apasc * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale excepted Nledpfx Apol Tq Eujaec * Available from approx. week 32/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 Njdpfxjl Tphrj Apaelc * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system Nledpfxjl Th Ads Apaoc * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ systém kontroly tlaku v pneumatikách * Nouzové odpojení pro válce s perovým akumulátorem * Bubnové brzdy * 3 x 11 t BPW Eco nápravy * Parabolické pružiny * Mechanické vyrovnání náprav vzadu * Boční ochrana proti podjetí * Otočné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední uzavřené plastové blatníky a rovné zadní pozinkované ocelové kryty s ochranou proti odstřikování * Konturovací páska po stranách a vzadu, reflexní * Výklopné víko (žárově zinkované) na skříňku na nářadí v platformě podvozku Nsdpex Ipa Nefx Apajlc * Multinapěťová instalace * LED zadní světla * Výstražné světlo (odnímatelné) vzadu * Tažná oj s okem 40 mm a nastavitelnou výškou pomocí tažné pružiny a napínáku * 15-pólová elektrická zásuvka * Po stranách vždy 4 kapsy na kolíky (bez kolíků), současně možnost zajištění nákladu * Balíček zajištění nákladu (La-Si) obsahuje: 2 oka (6,4 t) vpředu vlevo a vpravo na hlavním rámu platformy, 5 párů UVV otočných a sklopných vázacích ok, zatížitelných ve všech směrech a zapuštěných do vnějšího rámu – v rozích 13,4 t, jinak 10 t * 6 párů mechanických sklopných ramen pro celkovou šířku 3 m (ne ve zkosení vzadu) * Rozšiřovací desky uložené uprostřed ložné plochy * Odkládací plocha pro rameno bagru přes zadní nápravu až k zadnímu nosníku, délka cca 2 100 mm (2 páry vázacích ok 6,4 t po stranách odkládací plochy) * Mechanicky jednodílné nájezdové rampy s pružinovým mechanismem (cca 3 000 x 720 mm) * Mechanicky posuvné boční rampy * Ložná plocha nad otočnicí: cca 1 960 x 2 520 mm * Ložná výška nenaloženého vozu cca 1 070 mm * Zadní ložná plocha: cca 6 500 x 2 520 mm * Ložná výška nenaloženého vozu cca 910 mm (včetně 860 mm nájezdového zkosení) * Podvozek, otočný rám, tažná oj a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové válce atd. lakované černou barvou * 235/75 R 17,5 dvoumontáž kol * Pohotovostní hmotnost 5 900 kg * --technicky možné celkové povolené zatížení 30 000 kg-- * Vozidlo je žárově zinkované * Nové vozidlo s tovární zárukou * Změny a meziprodej vyhrazeny * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets, front and rear * VA: closed plastic fenders; HA: straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye, height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t), front left & right on the main frame of the bogie platform; 5 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, flush-mounted in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear incline) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the excavator arm storage) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above slewing ring: approx. 1,960 x 2,520 mm Nlsdpfx Apex Ipavsaoc * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector Nodpeq Dyvcofx Apaslc * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle Nodpfx Apetplv Noajlc * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Nodozd Dtgepfx Apaelc

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, 3 nápravy, SAF nápravy, otočný záves, listové pruženie, ABS (protiblokovací systém), viazacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná opora, bočná hliníková ochrana, zdvojené pneumatiky, odkladacia schránka Nadstavba: 3-nápravový podvalník s hydraulicky sklopnými a bočne posuvnými dvojdielnymi rampami, pozinkované rampy, 3x 10t SAF nápravy, bubnové brzdy, výrez na rameno rýpadla, 50 mm ťažné oko! Vrchné plato cca 1500 mm, spodné plato cca 6300 mm! Nledpfey R Ekijx Apasc Dĺžka rampy cca 4200 mm! Za príplatok je k dispozícii aj vhodná 40 mm oje! ÚDAJE O VÝBAVE BEZ ZÁRUKY, zmena, medzi-predaj a chyby vyhradené!

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené! Nodpfx Ajqpgtmjpaolc

Stav: použitý, maximálna hmotnosť nákladu: 16 950 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2006, ďalšia kontrola (TÜV): 04/2026, Rok výroby: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: We offer: Net purchase for companies within the EU holding a VAT ID number and for customers from non-EU countries. Nledpfjyv Ug Djx Apaec Leasing and financing options. Handling of all customs formalities. Issuance of temporary and export license plates. Transport to the port. All prices advertised are gross prices and already include the statutory VAT of 19%.

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profi ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Nápravy: * 4 x 11 t nápravy Gigant ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením a RtR ventilem ----Tažná oje: * Tažná oje s 50 mm okem a výškově nastavitelná ----Osvětlení / Elektrika: * EBS multi-napěťová soustava s 12 & 24 V elektroinstalací * 15-pólová zástrčka * LED osvětlení 12 / 24 V * Odnímatelný zadní LED výstražný maják * 2 LED couvací světla (ovládaná přes zpětný chod) ----Obecné příslušenství: * Manometr – ukazatel tlaku pro určení hmotnosti nákladu (nápravy odděleny do 2 okruhů vzduchového odpružení) * Boční ochrana proti najetí * Zadní výklopné podpěry na rámu podvozku * Mechanicky nastavitelné sady výstražných tabulí vpředu i vzadu * Nerezové plastové čtvrtkryty s ochranou proti odletu vody * Přímé, pozinkované zadní plechové zástěrky s ochranou proti odletu vody * Konturové reflexní pásky na bocích i vzadu * Nářadový box z pozinkovaného ocelového plechu, černě práškově lakovaný, cca 1000 mm široký, 600 mm hluboký, 300 mm vysoký ----Nízkoložná plošina: * Přední část před otočnou plošinou cca 490 mm dlouhá se 45° rohy * Roboticky svařovaná protiskluzová úprava na ocelové desce otočné plošiny * Podlaha z tvrdého dřeva v pochozích zónách nízkoložné plošiny ----Zabezpečení nákladu (balíček La-Si obsahuje): * U nosníku čelní stěny vlevo i vpravo vždy 1 x 13,4 t UVV kotvicí oko * Na boku 4 otvory v otočné plošině, každá s nosností 2 t * 1 pár kotvicích ok (13,4 t) zavěšený vzadu vlevo a vpravo před zadním nosníkem * Na boku 4 páry UVV kotvicích ok (10 t), výklopná a sklopná, zatížitelná všemi směry, zapuštěná v vnějším rámu * Na boku vždy 3 kapsy na kolíky, současně možnost kotvení 2 t ----Balíček pro rozšíření: * Žárově zinkované mechanické výklopné výložníky pro celkovou šířku 3 m (ovšem ne ve zkosené zadní části) * Držák prken pro rozšiřování podvozku vlevo v podélném směru ----Odstavná plocha pro rameno bagru: * Odstavná plocha pro rameno bagru nad zadní nápravou až k zadnímu nosníku cca 2100 mm dlouhá, cca 190 mm hluboká * Po stranách vždy 2 páry kotvicích ok 6,4 t v odstavné ploše pro rameno bagru ----RAMPY: * Hydraulické sklopné nájezdové rampy (cca 3000 x 720 mm), mechanicky příčně nastavitelné * Vnější laťky ramp z tvrdého dřeva * Ocelová konstrukce připravena pro 6cestné rozvaděče ----Výška ložné plochy: Nljdpfxsl Tlhrs Apasc * Nakládací hrana nenaložená cca 950 mm +/- 20 mm ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Podvozek, otočná plošina, výklopné výložníky, mechanické podpěry a nájezdové rampy žárově zinkovány * --Nápravy, vzduchojemy, tažná oje lakovány v černém odstínu-- ----Informace: * Vozidlo má registraci na jeden den v 07/2024, kvůli chybějícímu monitoringu tlaku v pneumatikách nebylo naloženo/již použito * Nové vozidlo s tovární zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Braking system: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange eye: * Drawbar height-adjustable by approx. 300 mm * 40 mm flange drawbar eye ----General equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, outside on front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----Loading platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) Nedpol Thy Rjfx Apaelc * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear-access storage compartment under the loading platform integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall and rear wall hot-dip galvanized * Drop side colour RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra charge ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: Nljdorwc R Rjpfx Apajc * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profi ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Nouzové uvolnění pružinových válců * Bubnové brzdy ----Nápravy: * 4x 11 t Gigant nápravy ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením včetně RtR ventilu ----Tažná lišta: * Tažná lišta s tažným okem 50 mm a možností výškového nastavení ----Osvětlení / Elektrika: * EBS multi-napěťový systém s 12 & 24 V elektroinstalací * 15-pólová elektrická zástrčka * LED osvětlení 12 / 24 V * Odnímatelný LED maják vzadu * 2 LED couvací světlomety (spínané přes zpátečku) ----Všeobecné příslušenství: * Manometr - ukazatel tlaku pro určení zatížení (nápravy oddělené do 2 okruhů vzduchového odpružení) * Boční ochrana proti podjetí * Výkyvné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední plastové čtvrt-blatníky se zástěrkami * Zadní rovné galvanizované ocelové bočnice se zástěrkami * Reflexní obrysová páska po stranách i vzadu * Skříň na nářadí z pozinkovaného plechu, černě práškově lakovaná (cca 1000 mm široká, 600 mm hluboká, 300 mm vysoká) ----Ložná plocha: * Přední část před točnou cca 490 mm dlouhá se 45° rohy * Svařovaný ROBOT protiskluzový povrch na ocelové desce točny * Podlaha z tvrdého dřeva v pojezdové oblasti hlubokoložné plošiny ----Zajištění nákladu (La-Si balíček obsahuje): * Před nosníkem čela vlevo & vpravo vždy 1x 13,4 t UVV kotevní oko * Na každé straně 4 otvory v točně s kotevní silou 2 t * 1 pár kotevních ok (13,4 t) zavěšených vzadu vlevo & vpravo před zadním nosníkem * Na každé straně 4 páry UVV kotevních kroužků (10 t), nastavitelné a sklopné, zátěž ve všech směrech, zapuštěné v bočním rámu * Na každé straně 3 kapsy pro sloupky s možností upevnění 2 t ----Sada pro rozšíření: * Žárově pozinkovaná mechanická výklopná ramena pro celkovou šířku 3 m (ne však v zadním šikmém zakončení) * Držák prken pro rozšíření pod podvozkem vlevo v podélném směru ----Odkládací plocha pro rameno rypadla: * Odložení ramene rypadla přes zadní nápravu až k zadnímu nosníku cca 2100 mm dlouhé a cca 190 mm hluboké * Na každé straně 2 páry kotevních ok 6,4 t v odkládací ploše pro rameno rypadla ----RAMPY: * Hydraulicky ovládané jednodílné nájezdové rampy (cca 3000 x 720 mm), mechanicky nastavitelné do strany Nsdpfxol Tnu Ae Apaslc * Vnější prkna ramp z tvrdého dřeva * Ocelová konstrukce připravená pro šestipákové regulační ventily ----Výška nakládací hrany: * Ložná hrana nenaložená cca 950 mm +/- 20 mm ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Podvozek, točna, výklopná ramena, mechanické podpěry a nájezdové rampy žárově zinkované * Nápravy, vzdušníky, tažná lišta lakované v černém odstínu ----Informace: * Vozidlo má denní registraci 07/2024, kvůli chybějícímu systému kontroly tlaku v pneumatikách nebylo zatíženo ani použito * Nové vozidlo, záruka výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: Nledsl Tnvgepfx Apasc * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026