Faymonville 6-Achs Multimax Satteltieflader - Hydr. Gelenkt kúpiť použité (36 130)

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes Blodpfx Aergzv Nsdvsg PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Ďalšie vozidlá na požiadanie. Výber z výbavy. Celková špecifikácia na vyžiadanie. LABUŤOVÝ KRK: * Labuťový krk v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3700 mm, vzadu so skosením cca 1000 mm x 10° * Vhodné pre ťahače: 4 x 2, 6 x 2 a 6 x 4 * Predný čelný panel z ocele, zasúvateľný, cca 400 mm vysoký * ASPÖCK-UNIBOX na prednej prípoji s 24N, 24S a 15-pol zásuvkami * 3 kW elektrohydraulická jednotka pre riadenie hydrauliky, okrem hydraulických lanových navijakov Bljdoxarmaopfx Advsg * Vonkajšie nosníky labuťového krku s montážnymi otvormi pre skrutkovacie kotviace oká. Prvý otvor cca 200 mm odpredu, potom každých cca 400 mm. 2 páry skrutkovacích kotviacich ôk vrátane (LC 5 000 daN) * 1 pár ležiacich kotviacich ok v zadnej časti labuťového krku (LC 10 000 daN) * Na labuťovom krku 1 pár zasúvateľných ALU bočných stien, cca 400 mm vysokých, eloxované prevedenie * Na labuťovom krku jedna zasúvateľná ALU zadná stena, cca 400 mm vysoká, eloxované prevedenie * Na labuťovom krku cca 40 mm silná povrchová vrstva z tvrdého dreva, nad kráľovským čapom podlahový profilovaný plech * 3,5-palcový kráľovský čap * Vodiaca doska labuťového krku pre sedlovú dosku, cca 500 mm široká * Okrúhla NATO zásuvka na prednej prípoji (Maeler & Kaege VG 96 917) * 2 páry kotviacich ok s pružinou, zavesené na vonkajších nosníkoch labuťového krku (LC 5 000 daN) LOŽNÁ PLOCHA: * Ložná plocha v vysúvateľnom prevedení, dĺžka cca 8800 mm so skosením vzadu cca 500 mm x 10° * Pneumatické uzamykanie s kónickým uzamykacím čapom a zosilnené pozície uzamykania, napájacie vedenia sú chránené v teleskopických nosníkoch a automaticky sa prispôsobujú zvolenej dĺžke ložnej plochy * BPW nápravy a zavesenie, 1. náprava riadená dopredu, všetky ostatné nápravy mechanicko-hydraulicky nútene riadené * 1. náprava s elektromagnetickým blokovaním spiatočky cez cúvací systém a manuálne aktivovanie * Technické zaťaženie na nápravu: 12 000 kg * Vzduchové odpruženie so zdvihovým a spúšťacím ventilom * 235/75 R 17.5 3PMSF dvojmontáž – výrobca podľa nášho výberu * Mechanické oporné nohy so 2-stupňovou prevodovkou a kľukou. JOST modul B – statická skúšobná nosnosť = 50 000 kg * Na ložnej ploche súvislá a medzi nápravami prerušená cca 50 mm silná vrstva z tvrdého dreva (tým sa zvyšuje koeficient trenia). – Štrbinové otvory pre zavesiteľné a premiestniteľné premostiace prvky * Vpredu na ložnej ploche – 1 posuvný medzistôl, cca 300 mm široký, pre výsuvnú rúru s veľkým prierezom, s profilovaným plechom. – vpredu a vzadu so štrbinovými otvormi pre zavesiteľné a premiestniteľné premostiace prvky * 1 pár kotviacich ok na prednej priečnej priečke (LC 10 000 daN) * 7 párov zapustených kotviacich ok vo vonkajšom ráme ložnej plochy, vyklápateľné von (LC 10 000 daN) * Rozšírenie (pozinkované) výsuvné o cca 230 mm na každú stranu (bez drevených trámov) * 1 pár mechanických zadných podpier * Riadenie zpredu a zozadu pomocou diaľkového ovládania, s kontrolou vyrovnania náprav, bez inštalácie v ťahači * TPMS snímače tlaku v pneumatikách namontované na všetkých kolesách * Uzamykanie ložnej plochy kónicky navařenými aretačnými profilmi každých 500 mm * Kontrola uzamknutia vľavo a vpravo na návesu * Pre medzistôl, cca 300 mm široký, mechanický zámok na upevnenie medzistola vo vysunutom stave * 5 párov závitových blokov na výsuvnom nosníku na montáž skrutkových ok M20 (LC 5 000 daN) BRZDOVÝ SYSTÉM

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete stock of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° Bledpfjtx Nwnex Advog * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with sockets * 3 kW electro-hydraulic power pack for hydraulic functions, except for hydraulic winches * 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * One plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approximately 40 mm thick hardwood floor covering over gooseneck, checker plate covering over king pin * 2-inch king pin * Rear part of gooseneck with mount for aluminum loading ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * Recess in the platform and into the chamfer for receiving excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, first axle with forced steering, all other axles with hydro-mechanical forced steering * First axle with electromagnetically activated reverse lock, activated via reverse gear and manual control * Technical axle load: 12,000 kg each, air suspension with lift/lower valve * Twin tires 235/75 R 17.5 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood floor covering approx. 50 mm thick on loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * Extendible U-profiles for inserting the aluminum covers: – on the fixed part behind the gooseneck – at the intermediate table – on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * 1 pair of mechanical rear supports * Remote steering from the front and rear via cable remote control, with single-track monitoring of axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-piece steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long and approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber flooring approx. 25 mm and steel flooring approx. 5 mm as additional

Stav: použitý, maximálna hmotnosť nákladu: 69 060 kg, celková hmotnosť: 84 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2013, ďalšia kontrola (TÜV): 07/2026, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park s vozidlami dostupnými ihneď alebo v krátkej dobe nájdete na našej webovej stránke. Výber zo základnej výbavy. Kompletná výbava na vyžiadanie. • Podvozok z vysoko kvalitnej jemnozrnnej ocele QSTE, so stredovým nosníkom, neteleskopický • Sklopné istiace oká, kladná sila cca 100 kN každé • 4 páry vreciek na kôly v oblasti ložných držiakov, cca 80 x 80 mm • Hydraulické podpery (elektrohydraulické) • 6 x 11 000 kg (technicky), nápravy SAF • Vzduchové odpruženie • 1. náprava riadená dopredu, 2. náprava pevná • 3. až 6. náprava nútene riadená • Tridec riadenie Blodpoy Ikbhefx Advjg • Prídavné riadenie • Zásuvka NATO • 1. náprava zdvíhateľná • Pneumatiky 265/70R19.5 • 3,5-palcový čap, vymeniteľný • Brzdový systém Wabco ABS/EBS • Predná oceľová stena, výška cca 400 mm • 2 bočné steny na husacom krku • Jednofarebné lakovanie v RAL 3000 červená

Stav: nový, maximálna hmotnosť nákladu: 51 780 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specifications available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,700 mm, sloped at the rear approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * One mounting hole in the rear upper area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in rear aluminum drop side, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch kingpin * 1 crosswise stake pocket strip in the gooseneck floor before the slope, for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM: * Retractable loading platform, length approx. 8,800 mm, with rear slope approx. 500 mm x 10° * One depression in the platform and extending into the slope for accommodating excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system complying with ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles trailing steerable * 3rd and 4th axles with electro-magnetic reversing lock, actuated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring on the platform, 50 mm thick, interrupted between the axles (increased coefficient of friction) * 1 intermediate table with offset platform, approx. 300 mm wide, for extension tube with large cross-section, sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Retractable extensions (galvanized) approx. 230 mm per side (without wooden planks) * 1 pair of fixed integrated wheel wells, open up to the extension, approx. 700 x 410 mm (W x D), in the platform ahead of the 1st axle * Between the 2nd and 3rd axles in the platform, 1 pair of fixed integrated wheel wells, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports * 245/70 R 17.5 3PMSF dual tires – manufacturer at our discretion HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-piece steel ramps, length approx. 4,350 mm and width approx. 900 mm * Hardwood covering; hydraulically folding ramp tips * Ramps can be hydraulically moved individually approx. 235 mm outwards and approx. 215 mm inwards * Hardwood covering on the slope of the platform Bjdpfx Aoyhkrlodvolg * Ramp with hardwood covering BRAKING SYSTEM: * WABCO EBS-E braking system in compliance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stav: nový, maximálna hmotnosť nákladu: 36 410 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park so vozidlami dostupnými ihneď a v krátkom čase nájdete na našej webovej stránke. Bedpjy Auh Isfx Advelg Výber zo špecifikácie. Kompletná výbava na vyžiadanie. HUSÍ KRK: * Husí krk v SNT dizajne pre optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 700 mm, vzadu so skosením cca 1 000 mm x 10° * Pre ťahače: 4 x 2, 6 x 2 a 6 x 4 * Čelná stena z ocele, zasúvateľná, výška cca 400 mm * ASPÖCK-UNIBOX * 3 kW elektrohydraulická jednotka na ovládanie hydraulických operácií, s výnimkou hydraulických lanových navijakov * Nad husím krkom cca 40 mm silná tvrdodrevo podlaha * 2-palcový kráľovský čap * Vodiaca doska husieho krku pre sedlový tanier, šírka cca 500 mm * Uchytenie v zadnej časti husieho krku pre ALU najazdové rampy * Okrúhla NATO zásuvka na čelnej prípojnej lište (Maeler & Kaege VG 96 917) * 4 kliny s držiakom pred čelnou stenou * 1 pár zásuvov na kolíky zapustených do husieho krku, pre zasúvacie kolíky cca 100 x 50 mm (vnútri na ráme podvozka) VÝBAVA: * Ložná plocha dĺžka cca 8 800 mm, vo výsuvnom prevedení cca 4 100 mm, so skosením vzadu cca 500 mm x 10° * Jedno vyhĺbenie v ložnej ploche a zasahujúce do skosenia na uloženie ramena lyžice bagra, cca 2 490 x 750 x 210/290 mm (D x Š x V) * Pneumatické uzamykanie s kužeľovým západkovým čapom a zosilnenými uzamykacími pozíciami, prívodné vedenia sú chránené vo výsuvných nosníkoch, automaticky sa prispôsobujú dĺžke ložnej plochy * TPMS systém kontroly tlaku v pneumatikách podľa ECE R 141 * BPW nápravy a zavesenie, 1. a 2. náprava pevná, 3. náprava riadená s výkyvnou koncovkou * 3. náprava s elektromagnetickou spätnou zarážkou cez spiatočku a manuálne aktivovanie * Technické zaťaženie nápravy: po 12 000 kg, vzduchové pruženie so zdvíhacím a znižovacím ventilom * 235/75 R 17.5 3PMSF dvojmontáž. Značka podľa nášho výberu * Mechanické oporné nohy sedlovej časti s dvojstupňovou prevodovkou a kľukou. JOST Modul B, statická skúšobná nosnosť = cca 50 000 kg * Na ložnej ploche súvislá a medzi nápravami prerušená cca 50 mm hrubá tvrdodrevo podlaha (zvýšený koeficient trenia) * 1 priečny stôl cca 300 mm široký pre výsuvnú rúrku s veľkým prierezom. Priečny stôl so zníženou ložnou plochou a výsuvnými závesnými lištami pre ALU premostenie * Uzamykanie ložnej plochy s kužeľovo privarenými profilmi každých cca 250 mm. Vrátane predsadenej platne * 1 pár upínacích krúžkov na prednej priečnej výstuhe (LC 10 000 daN) * 9 párov zapustených upínacích krúžkov v vonkajšom ráme ložnej plochy, vyklopiteľných von (LC 10 000 daN) * 1 pár pevne zabudovaných kolísk na kolesá pred nápravami, otvorených k priečnej výstuhe husieho krku, cca 700 x 410 mm (Š x H) * Kolískové jamy s hranatou protišmykovou lištou cca 15 x 15 mm plus rozšírenia v spodnej časti (ak je vozidlo vybavené výsuvnými rozšíreniami) * 1 pár pevne zabudovaných kolísk na kolesá cca 1 480 x 700 x 410 mm (D x Š x H), na ložnej ploche medzi 1. a 2. nápravou * Kolískové jamy s hranatou protišmykovou lištou cca 15 x 15 mm plus rozšírenia v spodnej časti * Hliníkové kryty kolísk na kolesá pred nápravami a medzi 1. a 2. nápravou, ktoré môžu byť tiež použité ako rozširujúce dosky (ak je vozidlo vybavené výsuvnými rozšíreniami) * Hliníkové prvky uzamykateľné na výsuvných rúrkach rozšírení * 1 pár mechanických zadných podpier * 1. náprava s pomocou pri rozjazde * Nalakované pieskové lôžko

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF Blsdpfsxtc Uhsx Advog • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: použitý, maximálna hmotnosť nákladu: 56 200 kg, celková hmotnosť: 69 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2021, dĺžka ložného priestoru: 12 500 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 625 mm, Rok výroby: 2021, Výbava: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low-bed semi-trailer, air-suspended, 2 self-tracking axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, first owner 4.1 m extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALUMINIUM WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, chamfer approx. 1,000 mm x 10° Loading platform: Extendable loading platform, length approx. 8.8 m, chamfer approx. 500 mm x 10° Excavator bucket recess approx. 2490x750x210 mm Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward Axles and suspension: 4x BPW axles 12 t, 2 rigid, 2 self-tracking axles Electromagnetic reverse interlock reverse gear + manual Air suspension with lifting/lowering valve Tyres: 235/75 R17.5 3PMSF MICHELIN | PIRELLI Load index: 143/141J (144/144F), spare wheel NEW 16x powder-coated ALUMINIUM WHEELS Brake system WABCO, EBS-E EU regulations 24V lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of external frame Complete steel construction shot-blasted, ARC-ZINC-COATED ZINACOR 850 (85% zinc - 15% aluminium) hot-refined Steel construction, steel grades: * S355J2+N/S355MC (yield strength 355MPa) * S690QL/S700MC (yield strength 690MPa) * Welders certified per DIN-EN 287-1 * MAG welding process per EN ISO 4063 * Shielding gas M21 per EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high Bedpfx Adsy Iq Arsvolg * NATO socket + spiral cable * 3 kW electro-hydraulic unit for hydraulic functions * Spare wheel holder on the front wall * Mounting holes for bolted lashing rings * First hole approx. 200 mm from the front, then every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole in the rear upper area of the outer beams * 1 pair of screw-in lashing rings (LC 10,000 daN) * Gooseneck approx. 40 mm thick hardwood flooring * 1 pair of removable aluminium side walls, aluminium rear wall approx. 400 mm high, anodized * 2-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * 4 wheel chocks with holders * Mounts for aluminium drive-on ramps * JOST mechanical landing gear with 2-speed gearbox and crank handle * Continuous hardwood flooring (approx. 50 mm) on loading platform, interrupted between the axles * Loading platform locking with conically welded locking profiles, 250 mm incl. pre-tensioning plate * Long holes for hook-in and repositionable bridging elements at the front of the loading platform * 1 intermediate table with stepped loading platform, approx. 300 mm wide for the extension tube * Front and rear with long holes for hook-in and repositionable bridging elements * Removable cover flush with loading platform * Extensions extendable approx. 230 mm per side * 1 pair of fixed open wheel recesses up to the extension, approx. 700 x 410 mm, in the loading platform before the 1st axle * Covers for wheel recesses longitudinally divided, with wooden covering, external with plug-in safety locks * Wheel recesses with metal covering and 15 x 15 mm square climbing bars every 200 mm * Between 2nd and 3rd axles, in the loading platform, 1 pair of fixed wheel recesses * 25 mm "Super Grip" rubber flooring and 5 mm metal floor as additional reinforcement on the chamfer of the loading platform * Control valves for the hydraulic ramps on the right and...

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with a bevel of approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel reinforcement on the gooseneck and rear bevel * 2" king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of detachable ALU side boards, approx. 400 mm high, anodised finish * 1 LED work light each, left and right, mounted on top of the front wall, wired to the connector strip for the tractor unit LOADING PLATFORM: * Loading platform, length approx. 9,600 mm, with a rear bevel approx. 900 mm x 6° Bljdjy Auhhepfx Adveg * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface on the lift bed and loading platform with approx. 5 mm steel underlay for extra reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable trailing axle * 3rd axle with electro-magnetic reverse lock, activated via reverse gear or manually * 1st axle with starting aid * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, length approx. 4,920 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edges of the ramp tips, with switch next to the ramp control * Ramp locking for road position via quick coupling * Factory-applied sand coating on the external ramp frame and ramp tips * Mechanical sideways support legs with drop tube design on the ramps for docking to unloading ramps * Hydraulic ramp control valves located on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection PAINTING: * Trailer carmine red (RAL 3002) * Rims silver-grey * Side boards natural aluminium * Wheel hubs per axle manufacturer specification * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector strip for supply lines to the tractor unit, positioned approx. 1,000 mm from the lower edge of the external frame profile * Lashing chain attachment points on the inner left and right of the front wall, including aluminium tray below left and right for storing chains or tie-down straps * Behind the front wall: 12 mm thick DELIGNIT floor covering, bolted * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable pressure roller * Pulley for the cable winch with shackle and bolted lashing ring

Stav: nový, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Extract from the equipment. Complete equipment details on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10°, and integrated mounting rail for loose ALU loading ramps * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines safely routed within the extendable beams and automatically adapting to the current platform length * Technical fifth-wheel load: 18,000 kg * For tractor units: 4 x 2 and 6 x 2 * TPMS tyre pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for control of hydraulic functions. Without supply connections installation on tractor unit * 4 pairs of recessed lashing rings in the gooseneck outer frame: - Front three pairs flat (LC 10,000 daN) - Rear pair foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets recessed in the gooseneck outer frame, for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B - static test load approx. 50,000 kg * Approx. 32 mm wooden floor encased in ALU Omega profiles on gooseneck and loading area * 10 pairs of recessed flat lashing rings in the loading area outer frame, foldable outwards * 1 pair of lashing rings each before the last axle and at the trailer rear crossmember (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the loading area frame, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier beneath loading platform, right side driving direction * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted on the left under the loading area (driving direction) * Bevel on the vehicle's rear crossmember, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle's rear crossmember * 1 pair of drop-in tube supports at the rear crossmember * Remote steering from front and rear via cable remote control, axle tracking control, no installation in tractor unit * Round NATO socket at the front connector bracket (Maeler & Kaege VG 96 917) * 1 LED work light each left and right on the front wall, wired to the tractor unit connector bracket * One locking point in extension, every approx. 500 mm * Holder for plug-in stakes inside the gooseneck front wall when not in use Bljdoy Augdjpfx Adveg * 4 wheel chocks with holder beneath the loading area * (Galvanized) extensions extendable approx. 230 mm per side (without timber planks) * 1 LED work light each left and right in front of axles, wired to connector bracket for tractor unit * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with start-assist * Under gooseneck and at rear crossmember left and right: one holder each for warning panels * Acoustic warning signal for reversing * EU reflector at rear of vehicle

Stav: nový, maximálna hmotnosť nákladu: 42 900 kg, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 29 000 mm, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný vozový park s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výpis z výbavy. Kompletnú výbavu poskytneme na požiadanie. LOŽNÁ PLOCHA: * Labutí krk, dĺžka cca 3 900 mm so stredovým nosníkom * Ložná plocha vo dvojito výsuvnom prevedení, dĺžka cca 9 300 mm * Na stredovom nosníku je pevne privarený cca 200 mm široký podkladový stôl * Pneumatické uzamykanie s kónickým uzamykacím čapom a zosilnenými uzamykacími pozíciami; napájacie vedenia sú chránené vedené vo výsuvných nosníkoch a automaticky sa prispôsobujú aktuálnej dĺžke ložnej plochy (s výnimkou napájania prvej a druhej uzamykacej pozície) * Technická zaťažiteľnosť sedla: 25 000 kg Pre TRZ: 4 x 2, 6 x 2 a 6 x 4 * TPMS – systém kontroly tlaku v pneumatikách podľa ECE R 141 * BPW nápravy a zavesenie; všetky nápravy hydromechanicky nútene riadené, namontované na točni * Technická nosnosť náprav: po 12 000 kg; vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * 275/70 R 22.5 3PMSF dvojmontáž; značka podľa nášho výberu * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S & 15 pin * 3 kW elektrohydraulický agregát na ovládanie hydraulických operácií * 3 páry zapustených upevňovacích ôk v vonkajšom ráme labutieho krku, vyklápacie smerom von * Pri kráľovskom čape 1 pár upevňovacích ôk (LC 10 000 daN) – všetky ostatné upevňovacie oká (LC 5 000 daN) * 3 páry vreciek na stĺpiky zapustených v vonkajšom ráme labutieho krku, pre nasadzovacie stĺpiky cca 100 x 50 mm * 1 priečna lišta na vrecká na stĺpiky namontovaná v podlahe ložnej plochy labutieho krku, pre stĺpiky cca 100 x 50 mm * 1x vzadu na labuťom krku * 2-palcový kráľovský čap * Mechanické sedlové podpery s 2-stupňovou prevodovkou a kľukou * 8 párov vreciek na stĺpiky zapustených v vonkajšom ráme ložnej plochy, pre nasadzovacie stĺpiky cca 100 x 50 mm * 10 párov zapustených upevňovacích ôk v vonkajšom ráme ložnej plochy, vyklápacie smerom von * Dodatočné riadenie zpredu a zozadu ovládateľné pomocou káblového diaľkového ovládania so sledovaním jazdnej stopy náprav, bez inštalácie v ťahači * U poslednej nápravy aktivované vyfukovanie vzduchových mechov pri zatiahnutí parkovacej brzdy * Predná stena z ocele, cca 1 600 mm vysoká, certifikované vyhotovenie podľa EN12642:2016 XL * Okrúhla NATO zásuvka na pripojovacej lište vpredu (Maeler & Kaege VG 96 917) * 1 LED pracovné svetlo vľavo a vpravo pri sedlových podperách, s kabelážou na pripojovaciu lištu k ťahaču * Na labuťom krku a ložnej ploche cca 32 mm drevená podlaha * Na výsuvnom profile s veľkým prierezom uzamykacia pozícia každých cca 500 mm * Na výsuvnom profile s malým prierezom uzamykacia pozícia každých cca 1 000 mm, čím vzniká možnosť uzamknutia každých cca 500 mm * Výrezy v vonkajšom ráme ložnej plochy na zavesenie napínacích pásov (LC 2 500 daN) Bsdpfx Aeyvnd Nsdvslg * 4 priečne lišty na vrecká na stĺpiky namontované v podlahe ložnej plochy pre stĺpiky cca 100 x 50 mm * 4 zakladacie kliny s držiakom pod ložnou plochou * 1 uzamykateľný INOX náradový box, cca 2 390 x 800 x 500 mm (D x Š x V), namontovaný pod ložnou plochou vľavo v smere jazdy * 1 dodatočný uzamykateľný INOX náradový box, cca 1 250 x 500 x 550 mm (D x Š x V), namontovaný pod ložnou plochou vpravo v smere jazdy * 1 LED pracovné svetlo vľavo a vpravo pred nápravami, vrátane kabeláže * 2 manometre nápravovej nosnosti namontované na ľavej strane vrátane diagramu zaťaženia náprav * 1. náprava s automatickou funkciou zdvíhacej nápravy a rozjazdovou funkciou

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle Bodpfx Adehlz S Novslg •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing Bljdpfx Aswcmhajdvjg - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Blsdpfx Ajl Sl Izedveg Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Rok výroby: 2025, Výbava: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Excerpt from the equipment list. Complete specification upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double extendable design, length approx. 9,300 mm * On the central beam, a fixed support table approx. 200 mm wide is welded * Pneumatic locking with tapered locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the respective platform length (except for the first locking supply) * Technical king pin load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydraulically/mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires; brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control. Without supply line installation at the tractor unit * 4 pairs of recessed lashing rings on the gooseneck outer frame, foldable outwards * At the king pin, 1 pair of lashing rings (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets integrated into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the gooseneck floor for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck * 2" king pin * Mechanical landing legs with 2-speed gearbox and hand crank * Approx. 32 mm wooden flooring encased in ALU omega profiles on the gooseneck and cargo area * 10 pairs of recessed lashing rings lying in the cargo area outer frame, foldable outwards: - in front of the last axle and at the trailer end crossmember, one pair each of lashing rings (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets integrated into the cargo area outer frame for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * Steering from front and rear can be controlled via cable remote, with axle alignment monitoring, without installation into the tractor unit * Steel front wall, approx. 1,800 mm high, certified according to EN12642 : 2016 XL * Circular NATO socket at front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connection bar Bsdexc Axxjpfx Advslg * 3 crosswise stake pocket rails mounted in the cargo area floor for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the large cross-section pull-out pipe, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * WADER container pockets in the cargo area for transport of: 1x 20' container at load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Blodpfjyhkqusx Advsg Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Blodpfxsk Af Svs Advjg Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Bedpfx Adjmfqi Ievjlg Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, maximálna hmotnosť nákladu: 40 800 kg, celková hmotnosť: 53 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2012, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Faymonville Multimax STN-4AX, 4-nápravový teleskopický podvalník Rok výroby: 11.2012 Prevádzková hmotnosť: 13 000 kg Celková hmotnosť: 53 800 kg Technicky možné: 55 400 kg Užitočné zaťaženie: 40 800 kg Zaťaženie na oji: 25 000 kg Pneumatiky: 205.65R17,5 3. a 4. náprava riadená nútene 4x SAF nápravy 7 600 kg s vzduchovým odpružením Dĺžka: 13 475 mm až 20 275 mm (výsuvná) Šírka: 2 540 mm až 2 620 mm Výška: 1 200 mm ! Ďalšie informácie na požiadanie e-mailom ! Blodeu Aynljpfx Advjg Údaje sú nezáväzné, možnosti omylu vyhradené! Údaje uvedené na internete predstavujú nezáväzný popis a neznamenajú garantované vlastnosti. Predávajúci nezodpovedá za chyby, preklepy ani chyby v prenose dát. Zmeny vyhradené. Stály nákup a predaj, ako aj protiúčet a prenájom žeriavov a zdvíhacích vozidiel a tiež stavebných strojov a ťažkotonážnych vozidiel.

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full range of vehicles, including those available for immediate or short-term delivery, on our website. Extract of equipment features. Full specification available on request. - Gooseneck, approx. 4,100 mm long, with central beam - Platform with double-extendable design, approx. 9,400 mm length - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Tyres: 235/75 R 17.5 3PMSF, twin tyres - WABCO brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic control operations; supply connections to tractor unit not included - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for insertable stanchions approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated into the outer frame of the loading platform for insertable stanchions approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel - Remote steering from front and rear via cable remote control with pushbuttons, autotraction control for the axles, no installation in tractor unit - 2 axle load gauges mounted on the left side - Front wall made of steel, approx. 1,600 mm high Blsdpfxswvzg Re Advsg - 3 cross-mounted stanchion pocket strips in the loading platform floor for insertable stanchions approx. 100 x 50 mm - 1 cross-mounted stanchion pocket strip in the floor of the gooseneck for insertable stanchions approx. 100 x 50 mm - 1 additional lockable INOX toolbox mounted under the platform - WADER container pockets in the platform for transport of: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metal coating (High Resistance Metallisation)

Stav: použitý, maximálna hmotnosť nákladu: 46 600 kg, celková hmotnosť: 60 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1990, dĺžka ložného priestoru: 10 430 mm, šírka ložného priestoru: 2 750 mm, celková šírka: 2 750 mm, celková výška: 3 700 mm, Ložná plocha: 8200 mm, rozšíriteľná na cca. 3250 mm, sklopné rozšírenia, výška ložnej plochy: cca. 980 mm, výška horného lôžka 1470 mm, zadný sklon: 760 mm, 4x ťažkotonážne uchytné oká na každej strane, hydraulická najazdová rampa (DxŠ) 2700x1000 mm, hydraulická opora vzadu, ťažné oko 50 mm, príprava na maják v zadnej časti, BPW náprava/y, 3. a 6. náprava riadená pasívne, bubnová brzdová sústava, listové pruženie, vozidlo môže byť polepené a/alebo popísané reklamou. SI86359 Naša ponuka je spravidla bez novej technickej kontroly (TÜV). V prípade záujmu o novú technickú kontrolu Vám radi pripravíme ponuku od partnerských servisov! Vozidlo môže byť polepené a/alebo popísané reklamou. Platné sú naše všeobecné obchodné a platobné podmienky. Bsdpoxyncdefx Advelg Radi Vám pripravíme ponuku financovania alebo leasingu na tento objekt. Neváhajte nás kontaktovať!

Stav: použitý, pohotovostná hmotnosť: 16 500 kg, maximálna hmotnosť nákladu: 67 500 kg, celková hmotnosť: 84 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2025, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimizing the loading area length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, and short 8x4 Extendable loading area: - Loading platform in double-extendable version, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A support plate approx. 300 mm wide with slots for plug-in and relocatable bridging elements is welded to the middle beam at the front and rear Hydraulic loading ramps: - Detachable hanging rail with bracket for mounting EU reflectors, warning signs, and speed stickers - Hardwood covering on the loading area’s bevel - Control valves for the hydraulic ramps located on the right side of the vehicle Axles and tires: - BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered - 1st axle with electro-magnetic reversing lock, activation via reverse gear and manual switch - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in compliance with ECE R 141 - TPMS tire pressure sensors installed in all wheels, including spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - Yellow-red air couplings on the junction rail - 3 kW electro-hydraulic unit to control hydraulic functions (except for hydraulic winches) - 1 spare wheel - Outer beams of the gooseneck with fixing holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) - On the gooseneck: 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Approx. 40 mm hardwood covering above the gooseneck - 3.5" kingpin - Gooseneck guidance plate for the fifth-wheel plate, approx. 500 mm wide - Round NATO socket at the front junction rail - One-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Continuous hardwood decking approx. 50 mm thick on the platform and interrupted between the axles - Loading area locking with conically welded locking profiles; within the first 3,000 mm extension a locking point every 500 mm on the large-section telescopic beam, thereafter every 1,000 mm Bledpeyvrvcsfx Advog - On the telescopic beam with small section, a locking point approx. every 3,000 mm and at maximum extension - Slots for plug-in and relocatable bridging elements at the front of the loading deck - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 7 pairs of recessed lashing rings in the outer frame of the loading area, fold-out (LC 10,000 daN) - Extendable widenings by approx. 230 mm per side - 1 pair of mechanical rear supports - Central lubrication system with 2 pumps, manufacturer BEKAMAX - Radio and cable remote control - 2 axle load gauges mounted on the left side including axle load diagram - 1st axle with automatic lift axle function - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) Bsdsuadk Njpfx Advolg - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou Bsdpfx Adoiuy Nlovslg - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve Bedsunrapspfx Advjlg - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)