Müller-Mitteltal Ka-Ta-R 14,4, Verzinkt, Alu-Bordwände kúpiť použité (55 824)

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm Dodpfxjl Tpc Ao Ahrekn * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear, front * Folding galvanized steel underrun protection for paver loading * Closed individual plastic mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without center stanchion – pendulum-mounted via manual central locking and left side drop-down with side wall spring assist) * Sliding tarpaulin similar to RAL 7038 agate grey with tensioning by lateral tensioning ratchets and tensioning cords at the front and rear * Front wall platform made of grating with access step at the drawbar and handrail on the front wall * Rear wall – made of HBW 400 steel – pendulum-mounted via automatic dual claw lock * 5 mm steel floor made of HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Side wall painting in any desired RAL color (except for special or metallic finishes), changeable up to approx. 6 weeks prior to completion * Axles, air tanks, landing gear, flange towing eye painted in a shade of black * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted Dodoxl Nkgjpfx Ahrskn * Available from approx. week 44 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange-type towing eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange-type towing eye ----Electrics / Lighting: * RDÜ tire monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cable for forestry and agricultural towing vehicles * LED rear lights ----General attachments: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access step, front left (in direction of travel) Dodpjq Euagofx Ahrekn * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear, at the central locking mounts, as well as 2 on the front wall * Steel pallet three-way tipper body (continuous side walls – no center posts – foldable with drop side spring assist; tailgate foldable and swinging, with manual central locking) * 4 mm steel floor * Rear mounting rail for loading ramps ----Load securing: * Lashing point, one per corner, 5 t each * Additionally, four 3 t lashing rings recessed in the side outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps at the rear, integrated under the loading platform in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear posts hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted black * Side panels can be painted in a RAL color of your choice (no special or metallic paintwork), changeable up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equaliser assembly ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flanged drawbar eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V, 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Equipment: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Right-hand side plastic tool box * Two-step entrance front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the side and rear in the central locking mounts and 2 on the front wall * Steel 3-way tipper body (continuous side walls – without central posts – foldable with board wall spring assist, foldable and swinging rear flap with manual central locking) * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side, integrated into the external frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment underneath the loading deck, integrated into the chassis ----Tyres: * Tyres 385/55 R 19.5 Dsdpfx Ahol Thw Iorjkn ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, drawbar eye and support winch painted in black * Side wall paintwork in your chosen RAL colour (no special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! Dksdsyfu Sdjpfx Ahron = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 05/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic leaf springs * Front support winch, rear spring-assisted square tube supports with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, enclosed fenders made of steel sheet * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, graduated * For drum diameter 800–3,000 x (1,700 mm width between drum arms) * With locking system for drum securing at the carrier arm ends, as well as central claw lock securing the cable drum mount to the chassis * Motor-hydraulic pull and push cylinders with pipe rupture safety. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system plugs, hoses, and pipes in NW 13. * Drum drive motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. * Including power pack with hydraulic Hatz 1B30 silent diesel engine and hand starter, 6.5 HP (150 bar), power supply selectable via switching the connection lines between truck hydraulics or the power unit * Toolbox approx. 500 x 350 x 400 mm * Chassis with galvanized drawbar * Advertising surface integrated within the side guard, exterior polyester-coated in RAL white * ---- as-new condition (used only for 1 project) * ---- * Financing available through our partners, with or without down payment or residual value, and various terms possible. Request a quote from us! * We are Müller Mitteltal authorized dealers! * Example leasing offer from our partner FM LeasingPartner from as little as EUR 515/month net on a 72-month term (no down payment, zero residual value). * Request a quote from us! Dedpfx Ahoy Rb Tysrskn ---- * Our opening hours * Monday to Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside these hours, appointments are available upon request * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle français

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou Djdpfswyhzpex Ahrokn * Ťažné oko výškovo nastaviteľné cca 300 mm * Podpera BPW * Mechanické zadné podpery * Plastová náradová schránka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm * V rohoch pred čelnou stenou a koncovým nosníkom vždy 1 x 6,3 t upevňovací krúžok, bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené do vonkajšieho rámu * Jednodielne mechanické mrežové nájazdové rampy s pružinovým mechanizmom pre obsluhu jednou osobou cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažné oko žiarovo pozinkované * Nápravy, pružiny, vzduchové zásobníky, predná podpera lakované v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dodanie približne od 35. týždňa/2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ---- Braking system: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ---- Drawbar / Flange drawbar eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into underrun protection ---- General attachments: * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards ---- Tipping body: * 3-way tipper body made of fine-grained steel for pallets, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed smooth steel front wall Dkodpfxsvin T Se Ahron * Hard wood plate for excavator bucket mounted on the front wall * Continuous side walls – without centre posts – foldable with spring-assisted side boards, and pendulum system via manual central locking * Rear stanchions bolted * Combined steel double wing rear doors, asymmetrically split, swingable up to 270° and lockable, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary bar lock and central locking, deactivation function for automatic tailgate opening when tipping in reverse with open wing door * 4 mm steel floor plate * Two-step access at front left * Mounting rail at the rear for loading ramps ---- Load securing: * One 7 t lashing point at each corner * Four 3 t lashing points recessed into the side outer frame on each side ---- Loading ramps: * Recessed mounting compartment for loading ramps at the rear of the chassis * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ---- Painting: * Chassis, drawbar, rear stanchions, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanized * Side wall colour can be selected in any desired RAL shade (no special or metallic paint); modifiable up to approx. 6 weeks before completion * Axles, air tanks, flange drawbar eye, front landing gear painted in black ---- Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 45 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lift and lower function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with force-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing leg at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel drop-side three-way tipper body made of fine-grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet steel * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls — foldable without centre stanchion — with side panel spring lifts and pivoting via manual central locking * Bolt-on rear stanchions * Combination steel wing doors at the rear — 2-leaf, asymmetrically divided — swingable and lockable up to 270°, non-foldable — with additional pendulum frame for automatic rear door opening during tipping; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic rear door opening when tipping backwards with open wing door * 4 mm steel floor plate * Two-step access on the front left * Rear mounting rail for loading ramps Djdpfx Ajvin Ucohrskn ----Load Securing: * 1 x 7 t lashing ring in each corner * On each side, 4 x 3 t lashing rings integrated into the outer frame ----Loading Ramps: * Recessed ramp chamber at the rear of the chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper body, underrun protection, and rear support legs hot-dip galvanized * Side panels painted in a desired RAL colour (excluding special or metallic paints); changeable up to approx. 6 weeks before completion * Axles, air tanks, flange towing eye, and front landing leg painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas Dkjdpfoykxflox Ahren WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia Dkedpor Dpzxofx Ahrsn * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) Djdpfxjr Dpz Ao Ahrjkn * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, objem nakladacieho priestoru: 10 m³, celková dĺžka: 7 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2012, Aplikačný materiál: Betón Dkodpfx Asx Utq Sehron Hrubá hmotnosť: 6.530 kg Užitočné zaťaženie: 25.470 kg CELKOVÁ HMOTNOSŤ: 32.000 kg

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment Dkedpjl Tihuefx Ahrjn ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: Dksdpfx Ahjxptn Djrjn * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT Veľmi dobre udržiavaný tandemový valníkový príves ZANDT Cargo * TAT B 110 * Valník * Spevnená drevená podlaha * Záťažové upevňovacie koľajnice * Dvojosý tandem * Široké pneumatiky * Nastaviteľné ťažné oje * Celková povolená hmotnosť 11 900 kg * Veľmi dobrý stav Možný protiúčet Financovanie od 3,99% Dkedjymuz Uepfx Ahrsn Chyby a predaj vopred vyhradené! Údaje v tomto inzeráte sú nezáväzné a neslúžia ako garantované vlastnosti. Predávajúci nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné osobitne preveriť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celej SR na požiadanie Otváracie hodiny: pondelok až štvrtok od 9:00 - 17:00 h, piatok od 9:00 - 14:00 h a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady Dkodpjymuz Iofx Ahrjn * tandem s 2 nápravami * široké pneumatiky * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8500 mm Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Dkjdpfxsn Aw Hks Ahron Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, maximálna hmotnosť nákladu: 22 000 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2008, Výbava: ABS, Identifikačné číslo vozidla: WMM0000080052540 PRIAMA NAKLADACIA PLOCHA Uzamykanie kontajnera Vlastná hmotnosť: 8 000 kg Nemecká STK: splatná Nápravy Gigant s bubnovými brzdami Vzduchové odpruženie Rozmery plošiny: 9 400 mm – výška nakladania: 880 mm – rozmery viď obrázok č. 4 Možnosť rozšírenia na 3 000 mm so svetlami Oje – 50 mm Hydraulické rampy, dvojdielne – dĺžka 2 600 + 1 600 mm – šírka 650 mm Opory Pneumatiky: 235/75 R17,5 Zmeny, medzipredaj a chyby sú výslovne vyhradené. Popis slúži len na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Rozhodujúci je popis podľa kúpnej zmluvy. Dkodstuhv Repfx Ahrjn Naša ponuka je všeobecne bez novej platnej technickej kontroly. V prípade záujmu o novú TK Vám radi pripravíme ponuku v spolupráci s našimi partnerskými servismi! Vozidlo môže byť polepené reklamou a/alebo označené popisom. Platí naše všeobecné dodacie a platobné podmienky.

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame Dksdsykx I Hepfx Ahron ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear Dkjdpfx Aoykx I Tehron ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: použitý, maximálna hmotnosť nákladu: 4 500 kg, celková hmotnosť: 6 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/1979, ďalšia kontrola (TÜV): 04/2026, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 1 900 mm, výška ložného priestoru: 380 mm, celková šírka: 2 500 mm, celková výška: 3 000 mm, Rok výroby: 1979,

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye Dedjx Nlkaepfx Ahrekn ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: použitý, Rok výroby: 2013, Rôzne kontajnery pre Müller-Mitteltal CHK: - 7 ks 4,5 - 5 m³, cena za kus 1.000,- € - 3 ks 8 m³, cena za kus 2.000,- € Všetky kontajnery sú v prevádzkyschopnom stave. Roky výroby 2013 - 2015. = Ďalšie informácie = Krajina výroby: DE Pre viac informácií kontaktujte Jan-Marc Schwickert. Dksdpsxb N A Isfx Ahren

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles (9 t each) * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via lift cylinder * Traction aid for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no installation required on the truck side, additional cable for operation from within the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange bolt-type towing eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light ----General Equipment: Dksdpfx Ahsyfy Rroren * BPW landing leg, front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead on the left * Shovel and broom holders in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, located at the right side * Enclosed side underrun protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength, fine-grain steel * 20,000 kg traction force * Hook height 1,570 mm * Hooklift operated via remote control * Remote control features fast-lowering function (unloading only, not while loading) * Emergency stop switches on both left and right sides * Container mountings with 4 supports per side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical drop support legs at rear * Rated for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside its charging cradle, the service brake must be applied to enable radio control. Brake connections must remain connected at all times to operate the hydraulic/pneumatic valves. * Underrun protection monitoring system ensures underrun guard is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, steps, underrun protection, and drop support legs hot-dip galvanized * Axles, air tanks, and front landing leg painted black * Palfinger hooklift painted black/yellow ----Notes: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Notes: * Fittings for hook systems available