Müller-Mitteltal Ka-Ta-R 14,4, Verzinkt, Alu-Bordwände kúpiť použité (57 955)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevantnosť
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum pridania
- Najstaršie inzeráty
- Dátum pridania
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Aktualizácia
- Najstaršia aktualizácia
- Aktualizácia
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- relevantnosť
- relevantnosť
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTALTandem- Stahl- 3- Seitenkipper mit Rollplane
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * Wabco EBS-E (elektronický brzdový systém s RSS)
* Núdzové uvoľnenie pre pružinové brzdové valce
* Bubnové brzdy
* Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom EBS signálu – bez montáže na strane vozidla –
* 2 x 9 t Gigant nápravy
* Vzduchové odpruženie s kontrolou výšky počas sklápania
* Ťažné oko s 50 mm prírubou (posuvné o +77 mm a -33 mm prostredníctvom odsadzovacej dosky)
* Jost podperná podpera vpredu
Ijdpfjxl Nkgjx Aglear
* Sklopný pozinkovaný oceľový podbehový ochranný kryt pre zásobovanie finišérom
* Uzavreté plastové jednostranné blatníky
* Stojacia plošina pri čelnej stene
* Mechanická rolovacia plachta
* 15-pólová elektrická zásuvka
* LED koncové svetlá s pozinkovanou ochrannou strieškou
* Podvozok z jemnozrnnej ocele
* Oceľová trojstranná korba (bočné steny s MM profilom – priebežné bez stredného stĺpika – výkyvné cez manuálne centrálne zamykanie, ľavá strana sklopná s pružinovým zdvihákom)
* Rolovacia plachta podobná RAL 7038 achátovo sivá s napínaním pomocou račňových napínačov po stranách a elastickými lanami vpredu a vzadu
* Čelná plošina z roštového plechu so stupňom na ťažnom ramení a držadlom na čelnej stene
* Zadná stena z HBW 400 ocele – výkyvná cez automatické dvojité pazúrové uzáverie
* 5 mm oceľová podlaha z HBW 450 ocele
* Po stranách po 4x 3 t zápustné a sklopné upevňovacie oká, zabudované v oceľovej podlahe
* Zosilnená a certifikovaná nástavba podľa EN 12642 XL vrátane certifikátu zabezpečenia nákladu do 19 t
* Sklápacia plošina a bočné steny v RAL 9010 čisto bielej
* Lakovanie bočných stien v dohodnutom farebnom odtieni RAL za príplatok možné
* Podvozok lakovaný v RAL 9011 grafitovo čiernej
* Nové vozidlo s plnou výrobcom poskytnutou zárukou
* Zmena údajov a predaj vyhradený
* Ihneď k dispozícii v Egestorfe
Malý inzerát
Egestorf
842 km
Pracovná plošinová náves
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear
* Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads
----Suspension:
* Air suspension with lift and lower system and RtR function
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required
* LED tail lights, 12/24 V
* Flashing side marker lights
* LED reversing lights activated via reverse gear
* SmartBoard as info tool installed with pressure sensors solely for total axle load display
* 7-pin socket at the rear for overlength lighting
* LED beacon (removable) at the rear
----General Attachments:
* Aluminum air reservoir
* Mechanical crank landing gear
* Galvanised steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning board package
Iedpfxsykx I He Agljar
----Low Loader Deck:
* 50 mm floor covering made from larch/Douglas fir instead of spruce/fir
* Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps
* Tread plate covering above the wheels
* SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the slanted corners
* Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes
* Plug-in aluminum rear panel, 150 mm high
* 2nd king pin position
* Preparation for container locking system
* Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck
* Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame
----Load Securing:
Gooseneck platform:
* 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole
* 2 x 16.5 t lashing rings recessed in the floor at the slope
* Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame
Low-bed platform:
* 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck
* 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame
* 4 stake pockets recessed in the outer frame on each side
* Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit)
----Excavator Boom Rest:
* From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest)
----Ramp:
* Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp shifting on sliding tube of the ramp shaft
----Hydraulics:
* Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing
Malý inzerát
Egestorf
842 km
Nízkopodlažný náves
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML
----Braking system:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN
* Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering device as well as RtR function
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights activated via reverse gear
* SmartBoard installed as infotool with pressure sensors exclusively for total axle load display
* 7-pin socket at the rear for overlength lighting
* Removable LED beacon at the rear
----General attachments:
* Aluminium air tanks
* Mechanical crank landing gears
* Galvanised steel mudguards
* Swivel arm as a carrier for connecting lines in front of the front plate
----Warning package:
* Mechanically adjustable warning sign package
----Low-loader platform:
* 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir
* Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps
* Tear plate coverings above the wheels
* SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm
* Top folding lid and side doors in the slanted corners
* Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable
* Plug-in aluminium rear wall, 150 mm high
* 2nd kingpin position
* Preparation for container locking
* Preparation for 3 recesses in the approach slope from the low deck to the gooseneck
* Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame
----Load securing:
Semi-trailer platform:
* Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole
* 2 x 16.5 t lashing rings recessed in the floor beside the approach slope
Iaodpfx Ageykx I Telsr
* Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* Each side with 2 x 6.3 t recessed lashing rings in the outer frame
Low-loader platform:
* 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck
* Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame
* Each side with 4 stake pockets, recessed in the outer frame
* Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point)
----Excavator arm trough:
* From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded)
----Ramp:
* Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (load capacity 26 t/pair)
* Hydraulic ramp movement on sliding tube of the ramp shaft
----Hydraulics:
* Hydraulic flow divider in th


Mesačne viac ako 140 000 dopytov na kúpu
Informujte sa teraz
+49 201 858 95 507
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0:
* Wabco EBS brzdový systém
* RDÜ systém monitorovania tlaku v pneumatikách
* Núdzové uvoľnenie pružinových valcov
* Bubnové brzdy
* 2 x 10 t BPW Eco nápravy
* Parabolické listové pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom
* Ťažná tyč s 50 mm prírubovým okom a výškovo nastaviteľná ťažná tyč
* Predná stabilná podpera Jost
* Zadné výklopné opory zvonka
* Bočný ochranný rám proti nárazu
* Plastové štvrtinové blatníky
* 15-kolíkový elektrický konektor
* LED zadné svetlá
* 50 mm podlaha z ihličnatého dreva
* Príprava pred čelnou stenou na dodatočnú montáž uzáverov kontajnera
* Skrutkovaná čelná stena z hladkého plechu
* Bočné steny z oceľového plechu - trapézový profil - sklopné s pružinovým zdvihákom bočnice
* Zadná oceľová stena zasúvateľná medzi rampy s držiakom vo vnútri pred čelnou stenou, ak sa nepoužíva
* Skrutkované zadné stĺpiky
* Perforovaný vonkajší rám ohnutý cca 45° so zaťažiteľnosťou 2 t každých 480 mm
* Možnosť inštalácie 3 t závesných upevňovacích ôk každých 600 mm
* V predných a zadných rohoch vždy 1 x 10 t upevňovacie oko, v čelnom a koncovom nosníku rôzne otvory na upevnenie 1,2 t
* Profifix upevňovacia lišta v pozdĺžnej osi uprostred na upevnenie do LC 3000 daN
* Jednodielne mechanické rampy s roštom a pružinovým mechanizmom pre jednoručnú obsluhu cca 2.750 x 620 mm (možno stiahnuť na 20 mm)
* Zadný nábehový uhol cca 860 mm
* Podvozok, ťažná tyč, čelná stena, zadná stena, rampy a výklopné opory žiarovo pozinkované
* Náter bočníc v RAL 9010 čistá biela
* Náter bočných stien v inom RAL odtieni za príplatok
Ijdpfsl Th Hwjx Agljar
* Nápravy, pružiny, vzduchové nádrže, prírubové oko a stabilná podpera v čiernej farbe
* Nové vozidlo s plnou zárukou výrobcu
* Zmeny a predchádzajúci predaj vyhradené
* Dostupné približne od týždňa 21/2026
* Ilustračné fotografie
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0:
* 2-in-1-Funktion: geeignet für Abrollcontainer und als Tieflader
----Bremse:
* EBS – elektronisches Bremssystem
* Notlöseeinrichtung für Federspeicherzylinder
* Trommelbremsen
----Achsen:
* 2 x 10-t-Achsen
----Federung:
* Luftfederung mit Hebe- und Senkanlage sowie RTR-Ventil
----Zugschere:
* Zugdeichsel 2.000 mm lang mit 40 mm Zugöse und höhenverstellbarer Einrichtung
----Elektrik / Beleuchtung:
* Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – ohne LKW-seitige Installation
* LED-Schlussleuchten 12 / 24 V
* 15-poliger Stromstecker
Iedpfsl Tq Nmox Agloar
----Allgemeine Anbauteile:
* Werkzeugkasten aus pulverbeschichtetem Stahlblech, ca. 1.000 x 300 x 600 mm
* Ablagekasten für Containernetz aus verzinktem Blech, 960 x 300 x 450/400 mm
* Konturmarkierungsband seitlich und hinten, reflektierend
* Seitlicher Unterfahrschutz
* Viertel-Kunststoffkotflügel mit Spritzschutz
* Kunststoff-Rammschutzpuffer hinten
* Klappbares A-Schild hinten
----Ladefläche:
* Hauptrahmen mit erhöhten Außenrahmen zur Führung der Abrollcontainer
* Stahlblechboden mit Rollenvertiefungen im Drehgestellbereich
* Containernutzlänge von 5.500 – 7.000 mm möglich
* Pneumatische 4-fach-Klammerverriegelung sowie mechanisch steckbare Anschlagwinkel vorn auf der Laufbahn, Ladungssicherungszertifikat nach DIN 30722-1
* Schweißraupe als Anti-Rutschbelag im Laufbahnbereich der Auffahrschräge
* Mechanische Fallstützen hinten
----Ladungssicherung:
* 1 Paar 10-t-UVV-Zurrösen vorne am Stirnwandträger
* 3 Paar 10-t-UVV-Zurrösen seitlich im Außenrahmen
* Jeweils seitlich 4 x 2-t-Zurrpunkte in Kleeblatt-Ausführung
* 4 x 8-t-Zurrbügel eingelassen im Außenrahmen
----Rampen:
* 1 Paar Aluminium-Auffahrrampen (10,6 t/Paar), 2.800 x 470 mm, geeignet für gummibereifte und kettenbetriebene Fahrzeuge (abschließbares Staufach von hinten zugänglich)
----Lackierung:
* Fahrgestell, Drehgestell, Verriegelungsteile und hintere Fallstützen feuerverzinkt,
* Zugdeichsel, Achsen und Luftkessel in schwarz lackiert
----Infos:
* Neufahrzeug ohne Erstzulassung, mit voller Herstellergarantie
* Irrtümer und Zwischenverkauf vorbehalten
* Beispielbilder
----Lieferzeit:
* ca. ab KW 23 / 2026 lieferbar
Malý inzerát
Egestorf
842 km
Roll off príves
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0:
* 2-in-1 – suitable for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
----Suspension:
* Air suspension with lifting and lowering function as well as RTR valve
----Drawbar:
* Drawbar, 2,000 mm long, with 40 mm eye and height adjustment
----Electrics / Lighting:
* Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required
* LED tail lights 12/24 V
* 15-pin power connector
----General Attachments:
* Tool box made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container mesh, galvanized sheet, 960 x 300 x 450/400 mm
* Contour marking tape, side and rear, reflective
* Side underrun protection
* Plastic quarter mudguards with spray protection
Iajdpfx Agel Tpc Aolsr
* Plastic rear impact protection buffer
* Foldable rear A-board
----Loading Area:
* Main frame with raised outer frame for guiding roll-off containers
* Steel panel floor with roller recesses in the bogie area
* Cont. length from 5,500 – 7,000 mm possible
* Pneumatic 4-position clamp lock and mechanical plug-in stop angles at the front of the guide track, cargo securing certificate to DIN 30722-1
* Weld seam as anti-slip coating in the inclined entry area
* Mechanical drop supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front bulkhead support
* 3 pairs 10 t UVV lashing rings laterally in the outer frame
* 4 x 2 t lashing eyes per side in cloverleaf design
* 4 x 8 t lashing brackets recessed into the outer frame
----Ramps:
* 1 pair aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear)
----Coating:
* Chassis, bogie, locking parts, rear drop supports hot-dip galvanized
* Drawbar, axles, and air tank finished in black paint
----Information:
* New vehicle, unregistered, full manufacturer's warranty
* Errors and interim sale reserved
* Sample images
----Delivery Time:
* Available approx. from calendar week 23 / 2026
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0:
* Wabco EBS brzdový systém
* RDÜ systém monitorovania tlaku v pneumatikách
* Núdzové vypúšťanie pre pružinové brzdové valce
* Bubnové brzdy
* 2 x 10 t BPW Eco nápravy
* Parabolické pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom
* Ťažné oje s 50 mm prírubovým ťažným okom a výškovo nastaviteľné oje
* Predný podperný zdvihák Jost
Ijdpfx Agel Th Hleloar
* Vonkajšie vyklápacie podpery vzadu
* Bočný nárazový ochranný systém
* Plastové štvrť-blatníky
* 15-pólová elektrická zásuvka
* LED zadné svetlá
* 50 mm podlaha z ihličnatého dreva
* Pred prednou stenou pripravená montážna sada pre dodatočnú montáž kontajnerových zámkov
* Skrutkovaná predná stena z hladkého plechu
* Bočné steny z oceľového plechu – trapézový profil – sklopné s plynovou pružiou na sklápanie
* Oceľová zadná stena zasúvateľná medzi rampy – držiak pri nevyužívaní vo vnútri pri prednej stene
* Zadné stĺpiky skrutkované
* Dierovaný vonkajší rám, ohnutý cca 45 stupňov, s viazací silou 2 t každých 480 mm
* Možná montáž 3 t padacích upevňovacích oka každých 600 mm
* V každom rohu vpredu a vzadu 1 x 10 t viazacie oko, vo prednej i zadnej priečnej stene rôzne otvory na upevnenie 1,2 t
* Profifix upevňovacia lišta pozdĺž stredu vozidla pre upevňovacie možnosti až do LC 3000 daN
* Jednodielne mechanické roštové najazdové rampy s pružinou pre jednému obsluhu, cca 2 750 x 620 mm (zúžiteľné na 20 mm)
* Zadný najazdový sklon cca 860 mm
* Podvozok, oje, predná stena, zadná stena, nájazdové rampy a výklopné podpery žiarovo pozinkované
* Nátery bočníc v RAL 9010 čistobiele
* Nátery bočných stien možné vo farebnom odtieni RAL za príplatok
* Nápravy, pružiny, vzduchové nádrže, prírubové ťažné oká a podperný zdvihák natreté čiernou farbou
* Nové vozidlo s plnou zárukou výrobcu
* Zmeny a medzipredaj vyhradené
* Dodanie cca od 21. týždňa roku 2026
* Ilustračné obrázky
Malý inzerát
Egestorf
842 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release system for spring-actuated cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering device
----Drawbar:
* Drawbar, 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cab via EBS signal – no installation required on the truck side
* 15-pin power connector
* 2 additional LED reversing spotlights (activated by reverse gear)
* LED lighting
Iaedpfx Agex Nli Njler
----General Equipment:
* Aluminium air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° angled, perforated for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals
* Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing rings on each side
* 5 pockets on each side for posts 100 x 50 mm in the outer frame (posts not included)
* 30 mm phenolic plywood floor
----Drum supports:
* 3 galvanized drum supports, secured by container locks, with side forklift pockets, 800 mm center/center (pocket width: 185 mm)
* Maximum drum diameter: 2,600 mm; maximum drum width: 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross brace
* Maximum drum weight per drum support: 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum axle
* Steel drum axle, diameter 76 mm, with centering and rotatable ends
* 2 locating rings
* 2 polyamide centering cones
* 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and uncoiling
----Loading height:
* Loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
* Axles painted in black shade
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from CW 28/2026
Malý inzerát
Egestorf
842 km
Príves
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raising and lowering system
----Drawbar:
* 1,800 mm long drawbar with 40 mm towing eye
----Electrics / Lighting:
* Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side-
* 15-pin power socket
* 2 additional LED reverse lights (activated by reverse gear)
* LED lighting
Iajdpfex Nlkaox Agljr
----General Attachments:
* Aluminium air tank
* Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals
* Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side
* 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery
* 30 mm phenolic plywood floor
----Cable Drum Supports:
* 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per support: 6,000 kg
* No drive or drum brake
* Support arm with tension lock for securing the drum axle
* 76 mm diameter steel drum axle, centred, with rotating ends
* 2 locating rings
* 2 polyamide centring cones
* 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised
* Axles painted in black
Malý inzerát
Egestorf
842 km
Príves
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
----Brake system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering system
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tyre pressure monitoring with display function in the truck cockpit via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General attachments:
* Aluminium air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform body:
* Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Installation of 3,000 kg drop-in lashing brackets possible at approx. 600 mm intervals – each side supplied with 12 x 3,000 kg lashing brackets as standard
* Each side with 5 pockets for stanchions 100 x 50 mm in the outer frame (stakes not included)
* 30 mm phenolic plywood floor
----Drum supports:
* 3 galvanised drum supports secured with container locks, with side forklift pockets, centre-to-centre 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross brace
* Maximum drum weight per cable drum support: 6,000 kg
* Without drive and drum brake
* Support arm includes clamping lock for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centring and rotating ends
* 2 locating rings
* 2 polyamide centring cones
* 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, turntable bogie, drawbar, outer frame and underrun protection hot-dip galvanised
* Axles painted in a shade of black
----Information:
Ijdpfex Nlkgox Agloar
* Technical upgrade to 30 t GVW possible
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Available from week 28 / 2026
Malý inzerát
Egestorf
842 km
Roll off príves
MÜLLER-MITTELTALRA-T 18,0 Außenroller, feuerverzinkt, Neu
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 14 620 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * RA-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
Iaodpfjv Nulzsx Aglsr
* Emergency release device for spring-brake cylinders
* Disc brakes
* 2 x 10 t BPW wide track axles
* Air suspension (automatic lowering when brake is disconnected)
* Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle
* Plastic toolbox 450 x 470 mm, mounted right side
* Side-mounted storage box, 1,000 x 500 x 500 mm
* Enclosed plastic fenders, front and rear axles
* Enclosed side underrun protection suitable as advertising surface
* Rear underrun protection
* Rear plastic impact protection buffers
* Rear hazardous goods plate
* 15-pin electrical connector
* LED tail lights
* Roller track length approx. 6,830 mm
* Pneumatic 4-point twist-lock system
* Mechanically adjustable stop brackets (2 positions) front left and right on guide rails
* 265/70 R 19.5 twin tires
* 3,220 kg unladen weight
* --Permissible gross weight technically possible up to 20,000 kg--
* Approx. 1,130 mm ride height when loaded
* Suitable for container lengths from 5,500 – 7,000 mm
* Hot-dip galvanized chassis
* Air tanks, axles, slewing ring, and drawbar
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available immediately from Egestorf
Malý inzerát
Bovenden
769 km
Mobilná betonáreň
Müller-MitteltalMÜLLER MITTELTAL SF32, Liebherr Betonmischer
Zavolať
Stav: použitý, najazdené kilometre: 1 100 km, typ prevodu: iný, farba: biely, celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 600 kg, maximálna hmotnosť nákladu: 25 400 kg, veľkosť pneumatiky: 425/65R22,5, prvá registrácia: 03/2016, zavesenie: vzduch, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), underrun protection, support legs
Superstructure: Liebherr concrete mixer type HTM 1004, approx. 10m³, 2x 10t BPW axles!
Iaedoi Rk Axjpfx Agljr
Matching hydraulics for power take-off on the towing vehicle available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Malý inzerát
Burghaun
750 km
Müller-Mitteltal SF32BM/BT Liebherr HTM1004 10m³ BPW zdvíhacia náprava
Müller-MitteltalSF32BM/BT Liebherr HTM1004 10m³ BPW Liftachse
Zavolať
Stav: použitý, konfigurácia náprav: 2 nápravy, Rok výroby: 2014, Výbava: ABS, Pre otázky týkajúce sa vozidla je Vám k dispozícii pán Seidel (telefonicky).
MÜLLER MITTELTAL SF32BM/BT Betonmixer náves
Isdpsyfu Sdsfx Agljar
Nadstavba: Liebherr HTM 1004 10m³, nápravy BPW, bubnové brzdy, pružinová brzda, Wabco ABS, 1. náprava zdvíhateľná, vzduchové odpruženie, prípustná celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 510 kg, nosnosť: 25 490 kg, profil pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm
Na požiadanie Vám radi pripravíme ponuku na leasing alebo financovanie.
Pán Seidel (tel.) Vám ochotne poradí.
Viac informácií nájdete na našej domovskej stránke.
... Zmena, omyly a medzičasný predaj vyhradený!!!
= Ďalšie informácie =
Celková prípustná hmotnosť: 32 000 kg
Vonkajšie rozmery: 0x2500x4000
Pre viac informácií kontaktujte Tobias Ebert.
Malý inzerát
Egestorf
842 km
Roll off príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles (9 t each)
* 1st axle as lift axle (fully automatic)
* Lift axle with +30 mm ride height via lift cylinder
* Traction aid for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no installation required on the truck side, additional cable for operation from within the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange bolt-type towing eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, switched via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control 12+24 V via tail light
----General Equipment:
* BPW landing leg, front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead on the left
* Shovel and broom holders in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, located at the right side
* Enclosed side underrun protection, usable as advertising space
----Hydraulics:
Iedpfx Asyfy Rrjgljar
* 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-strength, fine-grain steel
* 20,000 kg traction force
* Hook height 1,570 mm
* Hooklift operated via remote control
* Remote control features fast-lowering function (unloading only, not while loading)
* Emergency stop switches on both left and right sides
* Container mountings with 4 supports per side and 1 roller each at the rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to support main arm lifting
* 2 x mechanical drop support legs at rear
* Rated for 20 t gross weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside its charging cradle, the service brake must be applied to enable radio control. Brake connections must remain connected at all times to operate the hydraulic/pneumatic valves.
* Underrun protection monitoring system ensures underrun guard is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, steps, underrun protection, and drop support legs hot-dip galvanized
* Axles, air tanks, and front landing leg painted black
* Palfinger hooklift painted black/yellow
----Notes:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Container: Dimensions:
* Loading length: 5,500 mm
* Loading width: 2,300 mm
* Loading height: 1,000 mm
Notes:
* Fittings for hook systems available
Malý inzerát
Egestorf
842 km
Roll off príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
Iodex Dp Atspfx Aglear
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axles:
* 2 x t SAF axles
* 1st axle as a lift axle (fully automatic)
* Lift axle with +30 mm driving height via adjustment cylinder
* Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Drawbar Eye:
* 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12/24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Remote power supply 12+24V via tail light circuit
----General Attachments:
* BPW landing gear (front)
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond aluminum rims
* Detachable pin towing eye (usable only with retracted underrun protection)
* Closed plastic half-shell single mudguards
* Two-step access ladder in front of front wall, left side
* Shovel and broom holder in front of front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation
----Hook Lift:
* Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023)
* Base frame made of high-strength fine grain steel
* 20,000 kg pulling force
* Hook height: 1,570 mm
* Hooklift control via remote control
* Remote control with quick function for lowering, but not for lifting
* Emergency stop switches on left and right sides
* Container platform with 4 lateral supports per side and 1 roller at the rear per side
* Hydraulic rear lock
* 2 additional hydraulic cylinders to support the main boom lifting
* 2 x mechanical drop-down rear supports
* Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves
* Monitoring system for underrun protection to ensure it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Brake System:
* Wabco EBS-E braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x t SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with +30 mm driving height via adjustment cylinder
* Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power plug
* 3-pin 12V auxiliary plug
* LED lighting system 12/24V
* 2 LED reversing lights activated by reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connector cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via tail lights
----General Fittings:
* BPW landing gear at front
* Manually extendable underride guard for container lengths over 6,000 mm
* Speedline diamond aluminium rims
* Pin-lock tow coupling (use only with underride guard pushed in)
* Enclosed plastic half-shell individual mudguards
* Two-step access before the front bulkhead on the left
* Shovel and broom holder in front of the front bulkhead
* 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side
* Enclosed side guard usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023)
* Base frame made of high-strength fine-grained steel
* 20,000 kg tractive force
* Hook height 1,570 mm
* Hookloader control via remote control
* Remote control with quick function for lowering only, not for picking up
* Emergency stop switches on both left and right sides
* Container mountings with 4 supports each side and 1 roller at rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down rear supports
* Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate.
Iajdpfex Dp Agjx Agler
* Monitoring system for underride guard ensuring it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised
* Axles, air tank, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is immediately available
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axles:
* 2 x t SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via positioning cylinder
* Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power plug
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24 V electrics
* Extended connection lines for agricultural and forestry vehicles
* Power supply to remote control 12+24 V via tail light
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable tow pin coupling (usable only when underrun protection is retracted)
* Closed plastic single-splashguard fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side
* Closed side underrun protection usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-strength fine-grain steel
* 20,000 kg tensile force
* Hook height 1,570 mm
* Hooklift control via remote control
* Remote control with rapid function for tipping off, but not for lifting
* Emergency stop switches on both the left and right sides
* Container supports with 4 rests each side plus 1 roller each at rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves.
* Monitoring system for underrun protection—ensures retraction during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in a shade of black
* Palfinger hooklift painted black/yellow
----Info:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Container: Dimensions:
Iodpjx Dp Amofx Agljar
* Cargo length: 5,500 mm
* Cargo width: 2,300 mm
* Cargo height: 1,000 mm
Info:
* Mounting brackets for hook systems according to...
Malý inzerát
Regensburg
556 km
Nízkozdvižný príves
MÜLLER-MITTELTALPT 30,0 KOMPAKT GERADE FLÄCHE CONTAINER Nr.: 540
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 22 000 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2008, Výbava: ABS, Identifikačné číslo vozidla: WMM0000080052540
PRIAMA NAKLADACIA PLOCHA
Uzamykanie kontajnera
Vlastná hmotnosť: 8 000 kg
Nemecká STK: splatná
Nápravy Gigant s bubnovými brzdami
Vzduchové odpruženie
Rozmery plošiny: 9 400 mm – výška nakladania: 880 mm – rozmery viď obrázok č. 4
Možnosť rozšírenia na 3 000 mm so svetlami
Oje – 50 mm
Hydraulické rampy, dvojdielne – dĺžka 2 600 + 1 600 mm – šírka 650 mm
Opory
Pneumatiky: 235/75 R17,5
Zmeny, medzipredaj a chyby sú výslovne vyhradené. Popis slúži len na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Rozhodujúci je popis podľa kúpnej zmluvy.
Iodstuhv Rspfx Agloar
Naša ponuka je všeobecne bez novej platnej technickej kontroly. V prípade záujmu o novú TK Vám radi pripravíme ponuku v spolupráci s našimi partnerskými servismi! Vozidlo môže byť polepené reklamou a/alebo označené popisom. Platí naše všeobecné dodacie a platobné podmienky.
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9:
----Braking system:
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Accessories:
* Jost mechanical landing leg at the front
* Two mechanical, hot-dip galvanized folding supports at the rear
* Galvanized sheet steel toolbox, installed on the right side
* Hot-dip galvanized bolted underrun protection
* Plastic quarter mudguards
----Tipping Platform Body:
* Net hooks mounted laterally and at the rear in the central locking mounts, plus 3 hooks on the front wall
* Hot-dip galvanized chassis
* Steel pallet-wide 3-way tipper body
* Full-length drop sides, no center stanchions, with tailboard spring lifters
* Drop-down and swinging rear flap via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for later retrofitting of side extension boards
* Platform length: 5.5 meters
----Load Securing:
* One 5 t lashing ring in each corner
* Four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting track for drive-on ramps
* One pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
Iasdpfx Agem Angvelsr
* Lockable rear storage compartment integrated under the loading platform in the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in a shade of black
* Platform body color: RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available at extra cost
----Additional information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf, near the A7 motorway
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9:
Iasdjl Thx Ejpfx Aglsr
—Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
—Axles:
* 2 x 5.5 t Gigant axles
—Suspension:
* Parabolic springs with tandem equalizer unit
—Drawbar / Flange Eye:
* Height-adjustable drawbar (hot-dip galvanized, adjustable by 300 mm) with 40 mm flange eye
—Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
—General Attachments:
* Jost mechanical landing leg at the front
* Two mechanical hot-dip galvanized foldable supports at the rear
* Tool box made of galvanized sheet steel, mounted right side
* Hot-dip galvanized bolt-on underrun protection
* Tool box made of galvanized sheet steel, mounted right side
* Plastic quarter mudguards
—Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, plus 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipping body
* Continuous drop sides without center stanchions, foldable with sideboard spring assist
* Tailgate foldable or swinging, operated via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of side wall extensions
* 5.5 m platform length
—Load Securing:
* Each corner fitted with one 5 t lashing point
* Four 3 t lashing rings per side, mounted flush in the outer frame
—Ramps:
* Rear mounting rail for drive-on ramps
* Pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the load bed, integrated into the chassis from the rear
—Wheelbase:
* Wheelbase: 990 mm
—Tyres:
* Tyres: 235/75 R17.5
—Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Platform superstructure color: RAL 9010 pure white
* Custom painting of side walls and tipping bridge in other RAL colors available at extra cost
—Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer's warranty
* Subject to errors and prior sale
—Delivery Time:
* Immediately available ex Egestorf, A7
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering function
* Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
Iasdpomi Tmajfx Aglsr
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped installation
* Provision on the front wall for retrofitting container lock fittings
* Bolted front wall made from smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable, with central drop-in stake
* Steel rear wall, slide-in type between the ramps - when not in use, stowed inside at the front wall
* Rear stakes, bolted
* Perforated outer frame, approximately 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm possible
* Load securing package: in each front and rear corner, 1 x 10 t UVV lashing ring; on each side, 2 x 8 t UVV lashing rings, retractable into the outer frame; various holes for 1.2 t lashing options in the front and rear crossmember
* One-piece slide-in ramps, 12 t per pair, dimensions approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* --- Axles, air tanks, flange towing eye, and landing gear painted in black ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Pečať dôvery
Predajcovia certifikovaní spoločnosťou TruckScout24

Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinder
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eye and height adjustment by 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber rear lights
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped version
* Preparation at the front wall for the retrofitting of container locks
* Bolted front wall made of flat sheet metal
* Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the center
* Rear wall made of steel, slidable between the ramps (bracket for non-use located inside at the front wall)
* Rear stanchions bolted
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t drop-forged lashing rings every 600 mm
* Lashing (Lasi) package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings per side in the outer frame, various holes in the front and end cross member for 1.2 t lashing options
* One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eye, and landing gear painted in a black shade ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
Ijdpemi Tcqsfx Agloar
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 800 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 11,9:
----Brzda:
* Brzdový systém EBS
* Nouzové uvolnění pružinových válců
* Bubnové brzdy, 2 x 5,5 t
----Nápravy:
* Nápravy Gigant
----Odpružení:
* Parabolické pružiny s vyrovnávací jednotkou
----Tažná oj / příruba tažného oka:
* Výškově nastavitelná tažná oj (rozsah 300 mm)
* 40mm přírubové tažné oko
----Obecné přídavné díly:
* Přední opěrná noha Jost
* Zadní výklopné podpěry
* Plastová skříň na nářadí vpravo vpředu na čelní stěně
* Boční nárazový ochranný pás
* Plastové čtvrtové blatníky
----Elektrika / osvětlení:
* Systém monitorování tlaku v pneumatikách (TPMS)
* LED osvětlení
----Ložná plocha:
Ijdsl Th Nrjpfx Agloar
* Ložná plocha 5,37 m
* 50 mm podlaha z jehličnatého dřeva
* Přišroubovaná čelní stěna z hladkého plechu
* Boční stěny z trapézového ocelového plechu sklopné, s mechanismem pro zvedání bočnic
* Zadní stěna posuvná mezi držáky ramp, při nepoužívání uložena uvnitř před čelní stěnou
* Zadní sloupky přišroubovány
----Zajištění nákladu:
* Děrovaný vnější rám, přehnutý cca 45°, s vázací silou 2 t každých 480 mm
* Možnost instalace sklopných upínacích ok, nosnost 3 t každých 600 mm
* V každém rohu vpředu a vzadu 1x vázací oko 6,3 t
* V čelním a koncovém nosníku různá otvory pro upínání 1,2 t
----RAMPY:
* Jednodílné mechanické rampy z mřížového roštu s pružinovým mechanizmem pro obsluhu jednou osobou, rozměr cca 2 750 x 600 mm (lze stlačit až na 20 mm)
* Najezdová šikmina vzadu cca 860 mm, podvozek
----Pneumatiky:
* Pneumatiky 235/75 R 17.5
----Rozvor:
* Rozvor: 990 mm
----LakovánÍ:
* Tažná oj, čelní stěna, zadní víko, sklápěcí podpěry a nájezdové rampy žárově zinkované
* Nápravy, pružiny, vzduchojem a 40mm tažné oko lakované černě
* Lakování bočnic v RAL2011 – hluboká oranžová
* Lakování bočních stěn v odstínu dle RAL za příplatek možné
----Informace:
* Nové vozidlo s výrobní zárukou
* Změny a mezitímní prodej vyhrazeny
----Dodací lhůta:
* Okamžitě k dodání z Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 800 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Towing Eye:
* Drawbar height-adjustable by 300 mm
* 40 mm flange towing eye
----General Fittings:
* Jost landing gear at the front
* External foldable supports at the rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Load area:
* Load area 5.37 m
* 50 mm softwood floor
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, foldable, with drop side lifting aid
* Steel rear wall insertable between ramp holders, when not in use fits inside in front of the front wall
* Rear stanchions bolted
----Load securing:
* Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and end cross members for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
Iodsl Th Ncjpfx Agljar
* Drawbar, front wall, rear flap, foldable supports, drive-on ramps hot-dip galvanized
* Axles, springs, air tank, 40 mm flange towing eye painted in black
* Drop sides painted in RAL2011 deep orange
* Painting of side panels possible in an RAL colour at extra charge
----Info:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
Immediately available ex Egestorf
Malý inzerát
Coppenbrügge
815 km
Preprava kontajnerov
Müller-MitteltalCHK - diverse Container
Zavolať
Stav: použitý, Rok výroby: 2013, Rôzne kontajnery pre Müller-Mitteltal CHK:
- 7 ks 4,5 - 5 m³, cena za kus 1.000,- €
Iodexb N A Ispfx Aglear
- 3 ks 8 m³, cena za kus 2.000,- €
Všetky kontajnery sú v prevádzkyschopnom stave. Roky výroby 2013 - 2015.
= Ďalšie informácie =
Krajina výroby: DE
Pre viac informácií kontaktujte Jan-Marc Schwickert.
Uľahčujeme vám vyhľadávanie: "müller-mitteltal ka-ta-r 14,4, verzinkt, alu-bordwände"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.













































































































































































































































































































































































































































































