Trojsmerný sklápačský príves

MÜLLER-MITTELTAL 11,9 to Tandemkippanh. mit Anlegerampen

Stav: nový, maximálna hmotnosť nákladu: 8 670 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release system for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensation unit Podpjq Hg Dxefx Ac Hsrd * Height-adjustable hot-dip galvanized drawbar (adjustable by approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at front * 2 mechanical, hot-dip galvanized folding supports at the rear * Tool box made of galvanized sheet steel, mounted on right side * 15-pin power connector * Bolted underride guard * LED lighting * Plastic quarter mudguards * Net hooks on sides and rear in the central locking mounts, plus 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous drop sides without central stanchion, foldable with sideboard gas spring lifters * Tailgate swing-action or drop-down via manual central locking * Hot-dip galvanized, bolted rear stanchion * Each corner with 1 x 5 t recessed and folding lashing ring, plus 4 x 3 t recessed and folding lashing rings per side on the outer frame * 4 mm steel floor * Rear ramp mounting rail * Body reinforced, with load securing certificate per EN 12642 XL * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear * Tyres 235/75 R 17.5 * Axles, springs, air tank, drawbar and landing gear painted in black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in any RAL colour available for extra charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Delivery possible from week 49/2025

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline": * Floor and front wall hot-dip galvanized * EBS braking system * Emergency release device for spring brake cylinder * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * Drawbar adjustable in height by 300 mm, with 40 mm flange eye * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin power connector Prsdpel Thyxsfx Ac Hjd * LED lighting * Bolted underrun protection * Plastic quarter mudguards * Lashing hooks on the sides and rear in the central locking mounts, plus 2 on the front wall * Steel pallet tipper body, 3-way tipper (continuous side walls, without center stanchions, foldable with dropside spring lifter) * Rear stanchions bolted * Combination steel rear wing doors, 2-leaf, asymmetrically split, swiveling up to 270° and lockable, not foldable, with additional swing frame for automatic rear door opening during tipping operation; locking via galvanized bar lock and central locking * Deactivation function for the automatic rear door function when reverse tipping with open wing door * Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings recessed into the outer frame on each side, 4 mm steel plate floor, rear ramp rail mount * Reinforced body with load securing certificate in accordance with EN 12642 XL * 1 pair of aluminum ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment at the rear, integrated in the chassis under the loading platform * Chassis, drawbar, front wall, tipping bed, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost * Axles, springs, flange eye, air reservoir and support winch painted in black * New vehicle, unregistered, with manufacturer’s warranty * Subject to change and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: * EBS, emergency release device for spring brake cylinders * TPMS (tire pressure monitoring system) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * Height-adjustable, hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel, mounted on the right side * 15-pin electrical connector * Bolted underrun protection with LED tail lights * Plastic quarter mudguards * Net hooks located on the sides and at the rear in the central locking bearings, as well as 3 additional hooks on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous drop sides without center stanchion, foldable with tailgate spring lifts * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * In each corner: 1 x 5 t recessed and foldable lashing ring, and on each side: 4 x 3 t flush-foldable lashing rings in the outer frame * 4 mm steel floor, rear ramp track for loading ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, recessed under the loading platform in the chassis * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in black * Vehicle is hot-dip galvanized Prodpfx Acepk D D Us Hod * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: * EBS, emergency release mechanism for spring-actuated cylinders * TPMS – tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem load equalization unit * Height-adjustable hot-dip galvanized tow bar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized fold-down supports at the rear * Toolbox made of galvanized steel sheet, mounted on the right side * 15-pin electrical plug * Bolted underrun protection with LED rear lights * Plastic quarter mudguards * Mesh hooks at the sides and rear within the central locking housings, as well as three exterior hooks on the front wall * Hot-dip galvanized chassis * Steel drop-side tipping body (3-way tipper), fully galvanized * Continuous, foldable side walls without center stanchion, equipped with drop side spring-assist lifting * Foldable and swinging tailgate with manual central locking * Hot-dip galvanized, bolted rear stanchion Prjdpopk D Dmefx Ac Hjd * Each corner features one flush-mounted, foldable 5 t lashing ring; each side includes four flush-mounted, foldable 3 t lashing rings in the outer frame * 4 mm steel sheet flooring, rear receiving rail for loading ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear * 235/75 R 17.5 tires * Axles, springs, air tanks, tow bar, and landing leg painted in black * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex works Egestorf near the A7