Müller-Mitteltal T3 Tiefl., Luft., Schwarzdeckentransporte kúpiť použité (3 326)

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Equipment: Ledpfsl Tilxex Ankoaf * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox front right, mounted on the front bulkhead exterior ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolt-on bulkhead made of smooth sheet * Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist * Bolt-on, hot-dip galvanized rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side) * In the front and rear corners, one 6.3 t lashing ring fitted in each * Various apertures for securing options up to 1.2 t in the front and rear cross members ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under platform, integrated into the chassis ----Painting: * Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads * Board colour in RAL 9010 pure white * Side wall painting in an RAL colour tone available at extra charge ----Info: * New vehicle, not registered * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing Lodpsx Nli Nsfx Ankoaf * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 30 440 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40,0 ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátorové valce * Bubnové brzdy ----Nápravy: * 4 x 11 ton, nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s hydraulickým zdvíhacím a spúšťacím systémom a ventilom RtR ----Očkový ťah: * Priamy očkový ťah s 50 mm očkom a plynulo nastaviteľnou výškou ----Elektrická inštalácia / Osvetlenie: * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazovania na displeji nákladného vozidla prostredníctvom signálu EBS – bez inštalácie na strane nákladného vozidla. * SmartBoard ako informačný nástroj s tlakovými senzormi pre zobrazovanie zaťaženia nápravy pre každú nápravovú skupinu * 15-pólová zásuvka * LED zadné svetlá * LED obvodové svetlá (odnímateľné) vzadu ----Všeobecné montážne diely: * Balíky výstražných tabúľ vpredu a vzadu * 2 x náradie v skrinkách z pozinkovanej – práškou lakovanej – oceľovej dosky, cca 650 x 300 x 600 mm, bočne vpravo * Vpredu plný plastový samostatný blatník * Vzadu priamy oceľový blatník, každý s ochranou proti striekajúcej vode (potlačenie striekajúceho spreju) * Bočná ochrana proti nárazu ----Ložná plocha: * Predná časť otočnej plošiny predĺžená o 520 mm s 45° rohmi a 3 zapustenými úložnými priehradkami vrátane veka a možnosťou uzamknutia * Podlaha nad otočnou plošinou z 50 mm a v ložnej plošine z 60 mm mäkkého dreva * Gumová vrstva 20 mm namiesto drevenej podlahy v jazdnej dráhe s dĺžkou ložnej plošiny 6 780 mm vrátane nájazdovej rampy * Gumová vrstva na nájazdovej rampe vľavo a vpravo, cca 860 mm dlhá * Na každej strane 4 držiaky na nosníky (ale nosníky nie sú súčasťou) so súčasnou možnosťou upevnenia záťaže 2 tony ----Podvozok: * Podvozok z vysoko pevnej jemnozrnnej ocele ----Zabezpečenie nákladu (balík Lasi): Otočná plošina: * 2 páry 13,4 tonových očiek na upevnenie v vonkajšom ráme otočnej plošiny Ložná plocha: * Na každej strane 4 páry 10 tonových očiek na upevnenie vo vonkajšom ráme, spustiteľné a zaťažiteľné vo všetkých smeroch * Na každej strane vzadu 2 páry 13,4 tonových očiek na upevnenie, otočných ----Rampy: * Gumová vrstva na sklopných nájazdových rampách * Hydraulické sklopné rampy s hydraulicky výsuvnou špicou, cca 4 650 x 720 mm * Hydraulické bočné posúvanie rampy a ventily pre zaistenie nákladu ----Zadná podpera: * Hydraulická zadná podpera ----Rozšírenie: * 8 párov pozinkovaných sklopných oporníkov pre celkovú šírku 3 metre (ale nie v zadnej rampe) * Rozširovacie dosky uložené bočne vľavo v úložnom priestore ----Ukladacie miesto pre výložník rýpadla: * Ukladacie miesto pre výložník rýpadla nad zadnou nápravou až po koniec nájazdovej rampy, cca D=2 100 mm x Š=740 x H=190 mm * 2 páry 6,4 tonových očiek na upevnenie na bočnej strane v ukladacom priestore pre výložník rýpadla ----Hydraulika: * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákladnom vozidle vyššom ako 40 – max. 120 l/min) Lasdpfx Anjylfvmskjf ----Rozmery ložnej plochy: * Zadná ložná plocha: cca 6 780 x 2 520 mm (vrátane 860 mm nájazdovej rampy) * Ložná plocha nad otočným krúžkom: cca 2 990 x 2 520 mm ----Výška ložnej plochy: * Naložené, cca 890 mm, +/- 20 mm ----Lakovanie: * Bočné a zadné reflexné kontúrové pásy * Podvozok, otočná plošina, nájazdové rampy a sklopné oporníky, žiarovo pozinkované * Nápravy, očkový ťah, vzduchový kotol a otočný krúžok, natreté čiernou farbou ----Informácie: * Nové vozidlo so zárukou výrobcu * Chybné informácie a medzivýpredaj s

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (tyre pressure monitoring), available display in truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffer * Mechanical drop supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel deck with recessed rollers in the bogie area * Roll-off container transport: container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically insertable front stop angles in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip clamps for side-centering the skips, front 4 skip clamps are insertable and fitted with a pendulum stop * Weld seam as anti-slip coating in the ramp track area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips * 4 lashing cleats per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight of technically 20,000 kg * New vehicle with manufacturer's warranty * Errors and interim sale reserved Lodel Thv Repfx Ankoaf ----Delivery Time: * Available from approx. week 44 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), readout possible in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box, made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection Lsdpel Thwcjfx Ankeaf * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffers * Mechanical rear drop-down supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically pluggable stop angles at the front on the runway, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 removable skip stops for lateral centring, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing skip containers by positive and non-positive fastening of tensioning elements * 4 lashing profiles on each side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment, accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 44/2026

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left Lajdpfx Anel Tphroksf * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads Lasdpjxptn Defx Ankjf * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: Lasdpfx Anjl Tihuekef * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 30 440 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40,0 ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátory * Bubnové brzdy ----Nápravy: * 4 x 11 tonové nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s hydraulickým systémom na zdvíhanie a spúšťanie a ventilom pre automatické vyrovnávanie výšky ----Očkové ťažné zariadenie: * Priame očkové ťažné zariadenie s 50 mm čapom a plynulo nastaviteľnou výškou ----Elektrická inštalácia / Osvetlenie: * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom signálu EBS – bez potreby inštalácie na strane nákladného vozidla * SmartBoard ako informačný nástroj s tlakovými senzormi pre zobrazenie zaťaženia nápravy pre každú nápravovú skupinu * 15-pólová elektrická zásuvka * LED koncové svetlá * LED obrysové svetlá (odnímateľné) vzadu ----Všeobecné montážne diely: * Balíky výstražných tabúľ vpredu a vzadu * 2 x náradie boxy z pozinkovanej práškovej ocele, približne 650 x 300 x 600 mm na pravej strane * Predná celistvá plastová ochranná kapotka blatníka * Zadné priame oceľové ochranné kryty blatníkov, každý s ochranou proti striekajúcej vode (zabraňuje rozptylu vody) * Bočná ochranná lišta ----Nízko podlažná plošina: * Predná časť otočnej plošiny predĺžená o 520 mm s 45° rohmi a 3 zapustenými úložnými priehradkami vrátane veka a možnosťou uzamknutia * Podlaha nad otočnou plošinou z 50 mm a v nízko podlažnej plošine z 60 mm ihličnatého dreva * Gumová podlaha 20 mm namiesto drevenej podlahy v jazdnej oblasti s dĺžkou nízko podlažnej plošiny 6 780 mm vrátane rampy * Gumová podlaha na rampe vľavo a vpravo, dĺžka približne 860 mm * Na každej strane 4 úchytné body pre nosníky (ale žiadne nosníky nie sú súčasťou) s možnosťou upevnenia záťaže do 2 ton * súčasne ----Podvozok: * Podvozok z vysoko pevnej jemnozrnnej ocele ----Upevňovanie nákladu (balík Lasi): Otočná plošina: * 2 páry 13,4-tonových úchytných bodov vo vonkajšom ráme otočnej plošiny Nízko podlažná plocha: * Po stranách, vždy 4 páry 10-tonových úchytných bodov vo vonkajšom ráme, vysúvateľné a zaťažiteľné v každom smere * Vzadu po stranách, vždy 2 páry 13,4-tonových úchytných bodov, otočných ----Rampy: * Gumová podlaha na sklopných rampách * Hydraulické sklopné rampy s hydraulicky vysúvateľnou prednou časťou, približne 4 650 x 720 mm * Hydraulické bočné posúvanie rampy a ventily pre udržanie nákladu ----Zadná opora: * Hydraulická zadná opora ----Rozšírenie: * 8 párov pozinkovaných výsuvných opier pre celkovú šírku 3 metre (ale nie na zadnej rampe) * Rozšírovacie dosky uložené na bočnej strane vľavo v úložnom priestore ----Úložný priestor pre lyžicu rýpadla: * Úložný priestor pre lyžicu rýpadla nad zadnou nápravou až po koniec rampy, približne D=2 100 mm x Š=740 x V=190 mm * 2 páry 6,4-tonových úchytných bodov na bočnej strane v úložnom priestore pre lyžicu rýpadla ----Hydraulika: Lajdpoylfvgefx Ankef * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákladnom vozidle nad 40 – max. 120 l/min.) ----Rozmery ložnej plochy: * Zadná ložná plocha: približne 6 780 x 2 520 mm (vrátane 860 mm rampy) * Ložná plocha nad otočným krúžkom: približne 2 990 x 2 520 mm ----Výška ložnej plochy: * S nákladom: približne 890 mm, +/- 20 mm ----Lakovanie: * Reflexné bočné a zadné olemovanie * Podvozok, otočný krúžok, rampy a výsuvné opory sú žiarovo pozinkované * Nápravy, očkové ťažné zariadenie, vzduchový zásobník a otočný krúžok sú natreté čiernou f

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes Lajdpfx Ansrwc R Ajkef ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye Ledpfex Nlkaox Ankjaf ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals Lodjx Nlkgepfx Anksaf * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2010, 3-nápravový nízkozdvižný príves, prejazdný zozadu. Povolená celková hmotnosť 30 000 kg, užitočné zaťaženie 22 700 kg. Nakladacia plocha 8 900 mm (7 000 + 1 900) x 2 550 mm, výstražný balík pre nadrozmer, 12 kotviacich ôk a 8 vreciek na stĺpiky s možnosťou súčasného kotvenia, 6 prepraviek na náradie. Dvojdielne hydraulické rampy cca 2 100 + 2 000 x 800 mm s gumovým povrchom, hydraulická zadná podpera. Nápravy BPW, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75 R 17.5. Kovaný oje, otočné ťažné oko 40+50 mm. 2-vedenie pneumatík (duomatic), 2-vedenie hydrauliky, 24 voltov. Výška nakladania prázdneho prívesu cca 910 mm. Oranžový náter. STK platná do 03-2027. Ledpoy Evvlofx Ankeaf = Ďalšie informácie = Rozmer pneumatiky: 235-75R17.5 Pruženie: parabolické Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 22 700 kg Celková hmotnosť: 30 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové brzdové valce * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v kabíne nákladného vozidla cez EBS signál – bez potreby inštalácie na strane nákladného vozidla * Bubnové brzdy * 4 x 11 t Gigant nápravy * Vzduchové odpruženie so zadným manuálnym znížením podvozku Lasdpfxjxmpyke Ankef * Varovné tabuľové balíky vpredu a vzadu * SmartBord infotool s tlak. senzormi pre zobrazenie celkovej zaťaženosti náprav podľa skupiny * Bočné a zadné reflektujúce kontúrové pásky * Odnímateľné zadné LED výstražné svetlo * 15-pólová elektrická zástrčka * LED koncové svetlá * Priamy ťažný oje s 50 mm okom a plynule nastaviteľnou výškou * Predné kryté plastové jednostranné blatníky * Zadné rovné oceľové blatníky so zásterkami (potlačenie rozstrekovania vody) * Bočná ochrana proti podjazdu * Predĺžený predok podvozku pred točňovou plošinou cca 520 mm s 45° rohmi a 3 odkladacími priestormi vrátane uzamykateľných výklopných viek (otváranie smerom dozadu) * Podvozok z vysokokvalitnej jemnozrnnej ocele * Podlaha nad točňovou plošinou z 50 mm a na nízkoplošinovej časti z 60 mm smrekového dreva * Vonkajšie dosky nájazdových rámp z 50 mm tvrdého dreva * Paket zabezpečenia nákladu: 2 viazacie úchyty 6,4 t vpredu vľavo a vpravo na hlavnom ráme točňovej plošiny, po jednom páre 13,4 t viazacích ok po bokoch vpredu a vzadu na vonkajšom ráme, po jednom páre 10 t sklopných a výškovo nastavitelných viazacích ok po bokoch (vyťažené vo všetkých smeroch a zapustené do vonkajšieho rámu), na ráme blatníkov skrutkované 5 t viazacie oká (pri prednom blatníku vždy 2 ks a pri zadnom 1 ks), 2 páry viazacích ok 6,4 t po bokoch v priestore pre rameno bagra * 11 párov vyklápacích rozšírení pre celkovú šírku 3 m (nie na zadnej šikmine) * Úložný priestor (L = 2 470 x B = 570 x H = 250 mm) na rozširovacie dosky z oceľového plechu naprieč ložnou plochou pred prvou zadnou nápravou * Priestor pre rameno bagra nad zadnou nápravou až po koniec nájazdovej šikminy cca 2 300 x 740 x 190 mm * Na každej strane 2 blatníkové výrezy cca 640 mm široké – predný 340 mm hlboký, zadný 220 mm hlboký – s výsuvným krytom (úložisko krytov vpredu na točňovej plošine) pre prepravu kolesových nakladačov s rázvorom 3 100 – 3 640 mm * Mechanické podpery vzadu * Hydraulické sklápacie rampy s hydraulicky výklopným špicom cca 4 650 x 720 mm * Hydraulicky nastaviteľné postranné rampy * Ložná plocha nad točňou: cca 2 990 x 2 520 mm * Zadná ložná plocha: cca 6 780 x 2 520 mm, nakladacia výška zaťažená cca 890 mm +/- 20 mm (vrátane 860 mm nájazdovej šikminy) * Podvozok, točňa, vyklápacie rozšírenia, zadné podpery a nájazdové rampy žiarovo zinkované * Nápravy, vzduchojem a ťažné oje lakované na čierno * Pneumatiky: 235/75R17.5 * Vozidlo je žiarovo zinkované * Nové vozidlo so zárukou výrobcu * Zmeny a predaj vyhradené * K okamžitému odberu v Egestorfe

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord info tool installed with pressure sensors for total axle load display per axle group Lajdpfx Aoxmpydenkof * Reflective contour tape on sides and rear * LED beacon (removable) at rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Closed single plastic fenders at front * Straight steel mudflaps at rear, each with spray suppression * Side underrun protection * Front extension ahead of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm coniferous wood, in low-bed platform made of 60 mm coniferous wood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t at front left and right on main frame of turntable platform, laterally front and rear each 1 pair of 13.4 t lashing rings on outer frame, plus 1 pair per side of 10 t swiveling and lowerable lashing rings, loadable in all directions and recessed in outer frame, screwed-on 5 t lashing rings to outer frames of wheel recesses (2 at each front recess, 1 at each rear), 2 pairs of 6.4 t lashing rings laterally in excavator arm holder * 11 pairs of folding outriggers for 3 m overall width (not in rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for extension planks, made of sheet steel, mounted transversely to the loading platform in front of the first rear axle * Excavator arm holder above the rear axle up to the end of the drive-on slope, approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide — front: 340 mm deep, rear: 220 mm deep — with sliding covers (storage for covers at front on turntable platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic sideways ramp adjustment * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded loading height approx. 890 mm ± 20 mm (incl. 860 mm drive-on slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Ljdpfx Ael Th Nnenkeaf * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 7 950 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2010, ďalšia kontrola (TÜV): 02/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11.000 kg Pohotovostná hmotnosť: 3.050 kg Užitočná nosnosť: 7.950 kg Celková dĺžka: 8.100 mm Dĺžka ložnej plochy: celkovo cca 6.000 mm Šírka: 2.550 mm / šírka ložnej plochy cca 2.470 mm Výška nakladania: 900 mm Ďalšie informácie - výškovo nastaviteľné oj - podporná noha - bočnice 400 mm, pružinové - elektrické koleso - nápravy BPW - mrežové rampy, bočne posuvné - lezecké lišty, zadná podpera Ljdpfxjx E I Ute Ankjaf - veľký upínací balík

Stav: použitý, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/2011, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Ďalšie informácie - Rampy pokryté roštom - Pružinové rampy - Sklopné podperné nohy Lsdpszb Ua Tefx Ankoaf - LED cúvacie svetlá - Pružiny bočníc - Nápravy BPW - Bočnice 400 mm - Užitková dĺžka 6.000 mm vrátane zadného dorazu cca 1.100 mm

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low Loader – Flatbed – Trailer Available in calendar week 37 of 2026, inquiry number: 31941. Delivery to your address possible. * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall * Excavator bucket tray made of hardwood, bolted to front wall * Unladen deck height: 930 mm / laden: 870 mm * Single-piece ramps with hot-dip galvanized anti-slip steel grating, can be pushed together to about 20 mm, secured by support rods and diagonal bracing * Ramp assister with vertically mounted, adjustable springs for easy one-man operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashings, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm spacing possible) with close-spaced cross profiling, raised front and rear edge, rear drive-on slope, hot-dip galvanized * 10 UVV folding lashing rings LC 3000 daN retractable in the existing hole grid on the outer frame, additionally * Further lashing options via drillings (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox in front of the front wall * Side marker lights with indicator integration * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, folding supports at the rear * 2 container locks countersunk in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye possible upon request * 1 removable LED beacon at the rear ---- * Leasing, hire-purchase, financing, and trade-in possible * Example: €525 for 60 months, no down payment, no balloon payment Lsdpfxozbfmqj Ankoaf ---- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours available by appointment. We speak German, English, Polish, French. Leasing, financing, trade-in possible.

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall, insertable between the ramps – with internal mounting holder in front of the bulkhead when not in use * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; various holes in the bulkhead and rear cross member for 1.2 t lashing points * Profifix lashing rail along the longitudinal axis, centrally mounted, for lashing up to LC 3000 daN Ledjl Th Hlspfx Ankeaf ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Drop-sides painted in RAL 9010 pure white * Sidewalls painted in any RAL colour at extra charge * Axles, springs, air tank, flange eye, and landing gear painted in black tone ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 Laodpfxoyxbdbe Ankof * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.

Stav: použitý, pohotovostná hmotnosť: 8 680 kg, maximálna hmotnosť nákladu: 31 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, zavesenie: iný, veľkosť pneumatiky: 235/75R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5, veľkosť zadnej pneumatiky: 235/75R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, ABS, rozšírenie s výstražnými tabuľami, vozidlo sa predáva na objednávku., -- Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky --, Viac údajov na: !, More Details: ! Laodpfx Ajzrqidsnkof

Stav: použitý, pohotovostná hmotnosť: 5 300 kg, maximálna hmotnosť nákladu: 18 700 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2014, dĺžka ložného priestoru: 9 400 mm, zavesenie: oceľ, veľkosť pneumatiky: 205/65R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 205/65R17,5, veľkosť zadnej pneumatiky: 205/65R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Výška nákladnej plochy približne 900 mm, dĺžka nákladnej plochy približne 9 400 mm, upevňovacie body. – Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky –. Viac informácií nájdete tu: !, Viac podrobností: ! Laedpfxjzvyhkj Ankef

Stav: použitý, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, dĺžka ložného priestoru: 12 500 mm, výška ložného priestoru: 900 mm, celková dĺžka: 12 500 mm, Výbava: ABS, Nízko položený náves z nemeckého vlastníctva * Technicky povolená celková hmotnosť: 48 000 kg * Vlastná hmotnosť: 8 750 kg * Vzduchové odpruženie * Korba pre prepravu bagrov * Pneumatiky 235/75 R 17,5 * Hĺbka dezénu: približne 50–60 % * Výška sedla: približne 1,35 m Laedpfx Aszu Duxonkof * Ložná plocha: 8500 / 3000 mm * Výsuvné rozšírenia * ABS-EBS * Mechanické nájazdové rampy, jednodielne, s pružinovým odľahčením * Rozširovacie panely vpredu a vzadu * Nápravy BPW Technická kontrola platná do 05.2026 Kontrola tachografu platná do 11.2025

Stav: použitý, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 5 060 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2018, MUELLER MITTELTAL Príves (SKLÁPAČ) 5,06 m Dovoz / BEZ HAVLÍRNEJ HISTÓRIE VO VÝBORNOM STAVE! ? ROK VÝROBY: 2018 VZDUCHOVÉ ODPOROVANIE VEĽKOSŤ PNEUMATÍK: 385/55R19,5 RÁZVOR: 115 PLATFORMA: 506 x 242 x 50 m CELKOVÁ HMOTNOSŤ: 13 500 kg NOSNOSŤ: 10 000 kg TEL: KUBA – POĽŠTINA, ANGLIČTINA, NEMČINA, TALIANSKY SEBASTIÁN – POĽŠTINA, NEMČINA, TALIANSKY, ????? Laodpfx Aney E Ecnekof LASZLO – MAĎARČINA COSTEL – RUMUNČINA (Všetky formality pre export, vrátane čísla, vybavíme) RADEK – ?????