Müller-Mitteltal Tandem Kipper 18To Ka-Ta-M kúpiť použité (48 718)

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm Laodol Thvxspfx Aldsb * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange-type towing eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange-type towing eye ----Electrics / Lighting: * RDÜ tire monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cable for forestry and agricultural towing vehicles * LED rear lights Laodpfoq Euagsx Aldob ----General attachments: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear, at the central locking mounts, as well as 2 on the front wall * Steel pallet three-way tipper body (continuous side walls – no center posts – foldable with drop side spring assist; tailgate foldable and swinging, with manual central locking) * 4 mm steel floor * Rear mounting rail for loading ramps ----Load securing: * Lashing point, one per corner, 5 t each * Additionally, four 3 t lashing rings recessed in the side outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps at the rear, integrated under the loading platform in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear posts hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted black * Side panels can be painted in a RAL color of your choice (no special or metallic paintwork), changeable up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equaliser assembly ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flanged drawbar eye Ljdpfx Ajl Thw Ieldeab ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V, 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Equipment: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Right-hand side plastic tool box * Two-step entrance front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the side and rear in the central locking mounts and 2 on the front wall * Steel 3-way tipper body (continuous side walls – without central posts – foldable with board wall spring assist, foldable and swinging rear flap with manual central locking) * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side, integrated into the external frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment underneath the loading deck, integrated into the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, drawbar eye and support winch painted in black * Side wall paintwork in your chosen RAL colour (no special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ---- Braking system: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ---- Drawbar / Flange drawbar eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into underrun protection Ledpevin T Ssfx Aldoab ---- General attachments: * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards ---- Tipping body: * 3-way tipper body made of fine-grained steel for pallets, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed smooth steel front wall * Hard wood plate for excavator bucket mounted on the front wall * Continuous side walls – without centre posts – foldable with spring-assisted side boards, and pendulum system via manual central locking * Rear stanchions bolted * Combined steel double wing rear doors, asymmetrically split, swingable up to 270° and lockable, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary bar lock and central locking, deactivation function for automatic tailgate opening when tipping in reverse with open wing door * 4 mm steel floor plate * Two-step access at front left * Mounting rail at the rear for loading ramps ---- Load securing: * One 7 t lashing point at each corner * Four 3 t lashing points recessed into the side outer frame on each side ---- Loading ramps: * Recessed mounting compartment for loading ramps at the rear of the chassis * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ---- Painting: * Chassis, drawbar, rear stanchions, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanized * Side wall colour can be selected in any desired RAL shade (no special or metallic paint); modifiable up to approx. 6 weeks before completion * Axles, air tanks, flange drawbar eye, front landing gear painted in black ---- Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 45 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lift and lower function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with force-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing leg at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel drop-side three-way tipper body made of fine-grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet steel * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls — foldable without centre stanchion — with side panel spring lifts and pivoting via manual central locking * Bolt-on rear stanchions * Combination steel wing doors at the rear — 2-leaf, asymmetrically divided — swingable and lockable up to 270°, non-foldable — with additional pendulum frame for automatic rear door opening during tipping; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic rear door opening when tipping backwards with open wing door * 4 mm steel floor plate * Two-step access on the front left * Rear mounting rail for loading ramps ----Load Securing: Laodpfsvin Ucox Aldsb * 1 x 7 t lashing ring in each corner * On each side, 4 x 3 t lashing rings integrated into the outer frame ----Loading Ramps: * Recessed ramp chamber at the rear of the chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper body, underrun protection, and rear support legs hot-dip galvanized * Side panels painted in a desired RAL colour (excluding special or metallic paints); changeable up to approx. 6 weeks before completion * Axles, air tanks, flange towing eye, and front landing leg painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized Lasdpfxju I Iqxs Aldjb * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends Laedpsu I Iqlefx Aldjb * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends Laedpfxju I Iqrj Aldeb * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection Lsdsu I Iq Ejpfx Aldeab * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm Lajdju I Iqfepfx Aldjb * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 8 800 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 11,9: ----Brzda: * Brzdový systém EBS * Nouzové uvolnění pružinových válců * Bubnové brzdy, 2 x 5,5 t ----Nápravy: * Nápravy Gigant ----Odpružení: * Parabolické pružiny s vyrovnávací jednotkou ----Tažná oj / příruba tažného oka: * Výškově nastavitelná tažná oj (rozsah 300 mm) * 40mm přírubové tažné oko ----Obecné přídavné díly: * Přední opěrná noha Jost * Zadní výklopné podpěry * Plastová skříň na nářadí vpravo vpředu na čelní stěně * Boční nárazový ochranný pás * Plastové čtvrtové blatníky ----Elektrika / osvětlení: * Systém monitorování tlaku v pneumatikách (TPMS) * LED osvětlení ----Ložná plocha: * Ložná plocha 5,37 m * 50 mm podlaha z jehličnatého dřeva * Přišroubovaná čelní stěna z hladkého plechu * Boční stěny z trapézového ocelového plechu sklopné, s mechanismem pro zvedání bočnic * Zadní stěna posuvná mezi držáky ramp, při nepoužívání uložena uvnitř před čelní stěnou * Zadní sloupky přišroubovány ----Zajištění nákladu: * Děrovaný vnější rám, přehnutý cca 45°, s vázací silou 2 t každých 480 mm * Možnost instalace sklopných upínacích ok, nosnost 3 t každých 600 mm Lajdpfx Alol Th Nrsdeb * V každém rohu vpředu a vzadu 1x vázací oko 6,3 t * V čelním a koncovém nosníku různá otvory pro upínání 1,2 t ----RAMPY: * Jednodílné mechanické rampy z mřížového roštu s pružinovým mechanizmem pro obsluhu jednou osobou, rozměr cca 2 750 x 600 mm (lze stlačit až na 20 mm) * Najezdová šikmina vzadu cca 860 mm, podvozek ----Pneumatiky: * Pneumatiky 235/75 R 17.5 ----Rozvor: * Rozvor: 990 mm ----LakovánÍ: * Tažná oj, čelní stěna, zadní víko, sklápěcí podpěry a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchojem a 40mm tažné oko lakované černě * Lakování bočnic v RAL2011 – hluboká oranžová * Lakování bočních stěn v odstínu dle RAL za příplatek možné ----Informace: * Nové vozidlo s výrobní zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Okamžitě k dodání z Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 800 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----General Fittings: * Jost landing gear at the front * External foldable supports at the rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Load area: * Load area 5.37 m * 50 mm softwood floor * Bolted smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel sheet, foldable, with drop side lifting aid * Steel rear wall insertable between ramp holders, when not in use fits inside in front of the front wall * Rear stanchions bolted Lodpfxel Th Nco Aldoab ----Load securing: * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and end cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, rear flap, foldable supports, drive-on ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye painted in black * Drop sides painted in RAL2011 deep orange * Painting of side panels possible in an RAL colour at extra charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: Ledpfsl Tilxox Aldeab * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox front right, mounted on the front bulkhead exterior ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolt-on bulkhead made of smooth sheet * Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist * Bolt-on, hot-dip galvanized rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side) * In the front and rear corners, one 6.3 t lashing ring fitted in each * Various apertures for securing options up to 1.2 t in the front and rear cross members ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under platform, integrated into the chassis ----Painting: * Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads * Board colour in RAL 9010 pure white * Side wall painting in an RAL colour tone available at extra charge ----Info: * New vehicle, not registered * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: ----Brzdy: * EBS brzdový systém * Nouzové uvolnění pro pružinové válce * Bubnové brzdy ----Nápravy: * 2x 5,5 t BPW nápravy ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažné oko / tažná tyč: * Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem ----Obecné příslušenství: * Jost mechanická opěrná noha vpředu * vzadu 2 mechanické, žárově zinkované sklopné podpěry * Nářadový box z pozinkovaného ocelového plechu na pravé straně * Plastové čtvrtkrytky kol ----Elektroinstalace / osvětlení: * Systém pro kontrolu tlaku v pneumatikách (RDÜ) * 15 pólová elektrická zástrčka * Šroubovaný podjezdový ochranný rám s LED koncovými světly ----Sklápěcí korba: * Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně * Podvozek žárově zinkovaný * Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany * Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic * Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání * Zadní sloupek šroubovaný, žárově zinkovaný ----Zajištění nákladu: Laodepk D D Uepfx Aldjb * V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t * Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy ----RAMPY: * 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje * Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou * Vozidlo je žárově zinkováno ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL * Nové vozidlo s tovární zárukou * Změny, omyly a mezitímní prodej vyhrazeny ----Dodací lhůta: * K okamžitému odběru v Egestorf u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: ----Brzdy: * EBS brzdový systém * Nouzové uvolnění pro pružinové válce * Bubnové brzdy ----Nápravy: * 2x 5,5 t BPW nápravy ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažné oko / tažná tyč: * Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem ----Obecné příslušenství: * Jost mechanická opěrná noha vpředu * vzadu 2 mechanické, žárově zinkované sklopné podpěry * Nářadový box z pozinkovaného ocelového plechu na pravé straně * Plastové čtvrtkrytky kol ----Elektroinstalace / osvětlení: * Systém pro kontrolu tlaku v pneumatikách (RDÜ) * 15 pólová elektrická zástrčka * Šroubovaný podjezdový ochranný rám s LED koncovými světly ----Sklápěcí korba: Lodpfxjpk D Dmj Aldsab * Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně * Podvozek žárově zinkovaný * Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany * Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic * Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání * Zadní sloupek šroubovaný, žárově zinkovaný ----Zajištění nákladu: * V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t * Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy ----RAMPY: * 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje * Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou * Vozidlo je žárově zinkováno ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL * Nové vozidlo s tovární zárukou * Změny, omyly a mezitímní prodej vyhrazeny ----Dodací lhůta: * K okamžitému odběru v Egestorf u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 8 670 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Ljdpfxjq Hg Dxj Aldoab * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable (300 mm), hot-dip galvanized drawbar with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Tool box made of galvanized sheet steel, mounted on the right-hand side * Bolted underride guard * Plastic quarter mudguards * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipper Platform: * Lashing hooks on the sides and rear in the central locking mounts plus 3 pieces externally on the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls without central stanchion, foldable with drop-side spring lifts * Rear tailgate foldable or swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load Securing: * One 5 t recessed, foldable lashing ring in each corner * Four 3 t recessed, foldable lashing rings on each side, integrated into the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area in the chassis at the rear ----Tyres: * 235/75 R 17.5 tyres ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop-sides painted RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 600 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring actuators * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Lajdpfsv Dz N Aox Aldeb * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Towing Eye: * Hot-dip galvanized drawbar, height-adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * At the rear, 2 mechanical hot-dip galvanized drop-down supports ----Tipping platform: * Net hooks on the sides and rear in the central locking bearings, as well as 3 units on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides without central stanchion, foldable with drop-side spring assist * Rear gate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor * Rear guide rail for loading ramps ----Load securing: * Each corner with 1 x 5 t retractable and foldable lashing ring * Additionally, each side with 4 x 3 t recessed and foldable lashing rings in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Side board painted in RAL 9010 pure white * Painting of the side walls in RAL color shade available at extra cost * Floor and front wall hot-dip galvanized ----Info: * Reinforced bodywork with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf

Stav: dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 4 250 kg, maximálna hmotnosť nákladu: 14 750 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, povolené zaťaženie nápravy (náprava 1): 9 000 kg, dovolené zaťaženie nápravy (náprava 2): 9 000 kg, prvá registrácia: 03/2017, dĺžka ložného priestoru: 5 100 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 1 000 mm, celková dĺžka: 7 150 mm, celková šírka: 2 550 mm, celková výška: 2 600 mm, zavesenie: vzduch, brzda prívesu: príves s brzdou, Rok výroby: 2017, Výbava: ABS, IHNEĎ K DISPOZÍCII!!! DOBRÝ STAV!!! Lajdpfjy N Aitox Aldob SCHWARZMÜLLER M-serie trojstranný sklápací tandemový príves Čistá vývozná cena: 17.500 EUR

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring Lajdpfjyxbdbsx Aldeb * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner Lodpeyvxg Usfx Aldsab --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French * WhatsApp

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader | Drive-over Flatbed Trailer Reference No. for inquiries: 27963, available end of March 2026 NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Available at the end of March 2026 * Flatbed version with 400 mm high front wall, ramp safety via ramp holding rods and angled supports * Version GG 21 t with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm (loaded) / approx. 940 mm (unloaded) * 7,000 mm loading platform with 400 mm high front wall * Extended ramps: 3,000 mm, one-piece hot-dip galvanized ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load-securing package: - 4 UVV drop lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame, located approx. 1 m from the front and rear cross members - 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid in the outer frame - 2 UVV recessed lashing rings at front + rear cross member (LC 10,000 daN) * Additional lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross members * Pre-fitted for retrofitting container locks * 50 mm thick softwood floor * Gigant axles with air suspension incl. EBS 2S/2M, * Raise and lower function * 235/75R 17.5 (8 units) twin tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the front wall on the right-hand side in the direction of travel * LED lighting system * 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights Laodoyuq R Ujpfx Aldeb * Wide load warning board * 1 removable LED beacon incl. holder and installation * Folding supports at the rear, front support with gear-operated winding mechanism ---- Hire-purchase example via our partner MMV Leasing: €655/month net with 60 months term, no down payment, and €0 residual value Other terms with/without down payment/residual value possible! We are an official Müller-Mitteltal dealer ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours, appointments are possible by arrangement We speak German, English, Russian, Polish, French Leasing, financing, and trade-in available

Stav: použitý, maximálna hmotnosť nákladu: 12 720 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 360 mm, výška ložného priestoru: 1 000 mm, objem nakladacieho priestoru: 11 m³, Výbava: ABS, * 9003 - ID vozidla pre telefonické dopyty * SAF nápravy, vzduchové odpruženie, sklopná podbehová ochrana, plošina, rolovacia plachta, ťažné oko Ø 50 mm * Trojstranný sklápací valník, Bordmatik vľavo, 4x zapustené kotviace oka v podlahe Lasdpfx Aljyca Ulsdsb * Výborný stav! * Pneumatiky 385/65R22,5 (12 mm) ----naša e-mailová adresa:     náš servis pre vás:       - Zabezpečenie krátkodobých alebo colných značiek       - Preprava / dodanie v rámci EÚ       - Colné odbavenie vozidiel do tretích krajín Ak máte otázky v ruskom jazyku, môžete volať na nasledujúce číslo * WhatsApp len pre rusky hovoriacich: * WhatsApp pre angličtinu, nemčinu a iné jazyky:

Stav: použitý, maximálna hmotnosť nákladu: 13 800 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2019, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, celková šírka: 2 550 mm, celková výška: 1 710 mm, Výbava: zdvíhacie čelo, Humbaur HTK 185524 Tandem three-way tipper Air suspension First registration: 08.01.2019 MOT valid until: 09/2026 Gross weight: 18,000 kg Unladen weight: 4,660 kg Payload: 13,340 kg External dimensions: 7,520 mm x 2,550 mm x 1,820 mm Internal dimensions: 5,500 mm x 2,420 mm x 600 mm Platform KTL coated Drop sides and chassis hot-dip galvanized Coupling eye 50 mm Axles with drum brakes Maintenance-free parabolic suspension for optimal load distribution Air brake with release valve Compressed air coupling heads (red/yellow) Automatic brake anti-lock system (ABV) EBS brake system High-quality steel side walls, foldable, removable, and swingable to the side and rear 2 rear support stands Central locking system Removable front wall Lashing points in platform floor Reinforced 12-ton gearbox support winch with load and rapid gear Galvanized central tube continuously adjustable via crank Lajdpfsxzx E Sex Aldeb Extra wide super single tyres for low ground pressure LED side marker lights Hydraulic three-way tipping system Tyres: 435/50 R19.5 Beam recess Side wall spring Loading ramps available at an extra charge of €1,500 19% VAT deductible. ATTENTION !!!!! PLEASE READ !!!! We expressly reserve the right of prior sale as this item is also listed on other platforms. We strongly recommend viewing and inspection to avoid misunderstandings regarding condition and suitability. Viewings and inspections can be arranged by appointment at any time and are expressly welcome!!! The images may show similar models and may include optional accessories at extra cost. The internal dimensions provided are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 08:30 to 17:00, Saturday 08:30 to 14:00 Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stav: použitý, najazdené kilometre: 464 701 km, výkon: 96 kW (130,52 k), typ paliva: nafta, palivo: nafta, emisná trieda: Euro 3, Rok výroby: 2005, Výbava: ABS, prípojné zariadenie, Hrubá hmotnosť: 4.470 kg Lajdpfx Aloyx If Eedeb Užitočné zaťaženie: 3.020 kg CELKOVÁ HMOTNOSŤ: 7.490 kg

Stav: nový, pohotovostná hmotnosť: 3 960 kg, maximálna hmotnosť nákladu: 10 440 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 700 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55 R 19,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55 R 19,5, veľkosť zadnej pneumatiky: 385/55 R 19,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Trojsmerný sklápací vozík, dĺžka ložnej plochy cca 5 700 mm, bočnice vysoké 600 mm, pozinkované, + nástavba z pletiva vysoká 1 000 mm, nakladacia výška (zaťažená) cca 990 mm, 4x ukotvovacie oká v podlahe po 5 t, 8x ukotvovacie oká v podlahe po 3 t, zosilnený prevodový podperný navijak s pracovným a rýchlobehom vpredu, širokoprofilové pneumatiky: 385/55 R 19,5, podvozok: žiarovo pozinkovaný, príplatok za: hliníkové nájazdové rampy (cca 3 520 x 400 mm), nosnosť páru 10 t a 2x výklopné podpery vzadu, cena: 1 500 eur. -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, More Details: ! Ledpfx Ajy Ualpjldoab