Müller-Mitteltal 3- Achs Sattel.-Luft-Lenk,Hydr. Rampe Mit Gummi kúpiť použité (46 889)

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Platform: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (including holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General attachments: * Mechanically adjustable 3-metre warning sign kits front and rear * Support winch at the front * External foldable support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on left & right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards Ijdpfjy U A Efox Agtsth ----Loading area: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container exterior width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - each side fitted with 5 x 3 t UVV lashing rings - * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wood floor as well as rear in the rear cross member) * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, rear underrun protection, as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch, and flange towing eye painted in a black tone ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering mechanism ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED beacon (removable incl. bracket) at the rear * TPMS (tire pressure monitoring system) ----General attachments: * Mechanically adjustable 3 m warning panel sets, front and rear * Landing leg at the front * Externally mounted folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each installed left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Platform: Iedpsv D Tbdsfx Agtoth * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN), with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible - 5 x 3 t UVV lashing rings each side installed * 1 x 6.3 t lashing ring in each of the front and rear corners (front directly behind the container locks in the wooden floor, and rear in the end crossmember) * Various holes in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (10 t load capacity / pair), suitable for rubber-tyred and tracked vehicles * Rear loading compartment integrated under the platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg and flange drawbar eye painted in black shade ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 39/2026

Stav: použitý, maximálna hmotnosť nákladu: 38 230 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2026, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Müller-Mitteltal nízkoložný náves s kolískami pre kolesá TS 3 RM ML 30,0, 2 nakladacie výšky a rampy * Zvýšenie maximálneho zaťaženia na sedlo z 12 t na 18 t vrátane. Kráľovský čap namontovaný v: druhej pozícii 2“, kráľovský čap do vrátane ohybu 2 750 mm. Zadný výkyvný rádius cca 2 400 mm voľného priestoru (odporúča sa minimálne 150 mm voľného priestoru). Predný výkyvný rádius 1 480 mm alebo 1 570 mm s rezervným kolesom. Upozornenie: Dostatočný voľný priestor voči ťahaču je nutné zabezpečiť zo strany zákazníka. * Výsuvné časti pre predné a zadné kolískové výklenky na kolesá dole (hĺbka 205 mm). 6 ks podláh na zakrytie kolísk na uchytenie pneumatík podľa kódu 09.112, ALU vzduchojem namiesto oceľového. * Smartboard ovládacia skrinka ako infotool namontovaná na prívese s tlakovými senzormi pre zobrazenie celkovej nápravovej hmotnosti. Zobrazenie dostupné voliteľne cez ovládaciu skrinku alebo v nákladnom vozidle cez EBS vzduchové pruženie (závisí od výrobcu nákladného vozidla). * SP-kombi balík: náradie s 45° rohmi z pozinkovaného oceľového plechu, dodatočne práškované v RAL 9006 biela hliníková, na sedlovej platforme B=2 480 x V=500 mm so sklopným horným vekom, bočné dvere a šikmé ľavé ALU bočné steny sklopné k sedlovej platforme (500 mm vysoké), zasúvacia ALU zadná stena (150 mm vysoká), ALU bočné steny lakované na vnútornej aj vonkajšej strane v RAL 9006 biela hliníková. Vrátane sklopných a odnímateľných zadných zábran, pozinkované (bez vrchného laku). Vrátane šróbovaného predku. Dĺžka predného nosníka po ohyb je 3 935 mm. Predný výkyvný rádius bez rezervného kolesa, pri ohybe 2 450 mm alebo 2 750 mm cca 1 750 mm, resp. cca 1 480 mm. * 2 ks kontajnerových zámkov zapustených do predného nosníka. * 3 ks otvorov pod sedlovou plošinou na uloženie voliteľných ALU nájazdových rámp alebo drevených podláh na zakrytie kolísk pre kolesá. * Sklopné a výsuvné podpery (pozinkované) a drevené fošne na rozšírenie vrátane (nie na zadnom skosení), držiak na fošne na sedlovej platforme (šírka nákladu max. 2 500 mm). * Druhé LED pozičné svetlo vpredu a vzadu v rámci varovného balíka (dvojité osvetlenie), len v spojení s varovným balíkom. Itsdpfx Asy R Ipuegteh * 2 LED cúvacie svetlá na zadnej strane prívesu, ovládané spätným chodom (vhodné pre 12 V a 24 V), max. spolu povolené 2 kusy navyše. * 7-pólová zásuvka na zadnej strane, zapojená pre osvetlenie nadmernej dĺžky s koncovým svetlom (58 R) a uzemnením. * Gumový poťah na nájazdovej rampe vľavo a vpravo (cca 860 mm dlhý), gumové pásy na vnútornej hrane jednodielnych rámp. * Plne automatická centrálny mazací systém s čerpadlom (24V), zásobník na tuk a integrované ovládanie prívesu, bez pripojenia rámp (pri riadení: s pripojením rozdeľovača sedlovej platformy). Upozornenie: možné len pri ťahačoch s 24V svetelnou sústavou! Medzipredaj a chyby sú výslovne vyhradené! Predaj výhradne podľa našich VOP. Dôležité upozornenie – Dôležitá informácia: Napriek starostlivému prevereniu všetkých detailov v našej ponuke môže dôjsť k chybám. Časť týchto chýb môže byť spôsobená prenosom v systémoch rôznych platforiem. Preto upozorňujeme, že všetky údaje sú uvedené bez záruky a nepredstavujú právny nárok. Právne: Táto predajná ponuka nepredstavuje ponuku v zmysle §145 BGB. Ide iba o informácie na zahájenie zmluvného konania. Uvedené informácie sú bez záruky a nepredstavujú zaručené vlastnosti produktu.

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profi ----Brzda: Itedsl Tlhrepfx Agteh * Wabco EBS-E (elektronický brzdový systém) * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Nápravy: * 4 x 11 t nápravy Gigant ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením a RtR ventilem ----Tažná oje: * Tažná oje s 50 mm okem a výškově nastavitelná ----Osvětlení / Elektrika: * EBS multi-napěťová soustava s 12 & 24 V elektroinstalací * 15-pólová zástrčka * LED osvětlení 12 / 24 V * Odnímatelný zadní LED výstražný maják * 2 LED couvací světla (ovládaná přes zpětný chod) ----Obecné příslušenství: * Manometr – ukazatel tlaku pro určení hmotnosti nákladu (nápravy odděleny do 2 okruhů vzduchového odpružení) * Boční ochrana proti najetí * Zadní výklopné podpěry na rámu podvozku * Mechanicky nastavitelné sady výstražných tabulí vpředu i vzadu * Nerezové plastové čtvrtkryty s ochranou proti odletu vody * Přímé, pozinkované zadní plechové zástěrky s ochranou proti odletu vody * Konturové reflexní pásky na bocích i vzadu * Nářadový box z pozinkovaného ocelového plechu, černě práškově lakovaný, cca 1000 mm široký, 600 mm hluboký, 300 mm vysoký ----Nízkoložná plošina: * Přední část před otočnou plošinou cca 490 mm dlouhá se 45° rohy * Roboticky svařovaná protiskluzová úprava na ocelové desce otočné plošiny * Podlaha z tvrdého dřeva v pochozích zónách nízkoložné plošiny ----Zabezpečení nákladu (balíček La-Si obsahuje): * U nosníku čelní stěny vlevo i vpravo vždy 1 x 13,4 t UVV kotvicí oko * Na boku 4 otvory v otočné plošině, každá s nosností 2 t * 1 pár kotvicích ok (13,4 t) zavěšený vzadu vlevo a vpravo před zadním nosníkem * Na boku 4 páry UVV kotvicích ok (10 t), výklopná a sklopná, zatížitelná všemi směry, zapuštěná v vnějším rámu * Na boku vždy 3 kapsy na kolíky, současně možnost kotvení 2 t ----Balíček pro rozšíření: * Žárově zinkované mechanické výklopné výložníky pro celkovou šířku 3 m (ovšem ne ve zkosené zadní části) * Držák prken pro rozšiřování podvozku vlevo v podélném směru ----Odstavná plocha pro rameno bagru: * Odstavná plocha pro rameno bagru nad zadní nápravou až k zadnímu nosníku cca 2100 mm dlouhá, cca 190 mm hluboká * Po stranách vždy 2 páry kotvicích ok 6,4 t v odstavné ploše pro rameno bagru ----RAMPY: * Hydraulické sklopné nájezdové rampy (cca 3000 x 720 mm), mechanicky příčně nastavitelné * Vnější laťky ramp z tvrdého dřeva * Ocelová konstrukce připravena pro 6cestné rozvaděče ----Výška ložné plochy: * Nakládací hrana nenaložená cca 950 mm +/- 20 mm ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Podvozek, otočná plošina, výklopné výložníky, mechanické podpěry a nájezdové rampy žárově zinkovány * --Nápravy, vzduchojemy, tažná oje lakovány v černém odstínu-- ----Informace: * Vozidlo má registraci na jeden den v 07/2024, kvůli chybějícímu monitoringu tlaku v pneumatikách nebylo naloženo/již použito * Nové vozidlo s tovární zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lift and lower function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with force-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing leg at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel drop-side three-way tipper body made of fine-grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet steel * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls — foldable without centre stanchion — with side panel spring lifts and pivoting via manual central locking * Bolt-on rear stanchions * Combination steel wing doors at the rear — 2-leaf, asymmetrically divided — swingable and lockable up to 270°, non-foldable — with additional pendulum frame for automatic rear door opening during tipping; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic rear door opening when tipping backwards with open wing door * 4 mm steel floor plate * Two-step access on the front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * On each side, 4 x 3 t lashing rings integrated into the outer frame ----Loading Ramps: * Recessed ramp chamber at the rear of the chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles Itodpfx Agevin Ucstsh ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper body, underrun protection, and rear support legs hot-dip galvanized * Side panels painted in a desired RAL colour (excluding special or metallic paints); changeable up to approx. 6 weeks before completion * Axles, air tanks, flange towing eye, and front landing leg painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profi ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Nouzové uvolnění pružinových válců * Bubnové brzdy ----Nápravy: * 4x 11 t Gigant nápravy ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením včetně RtR ventilu ----Tažná lišta: * Tažná lišta s tažným okem 50 mm a možností výškového nastavení ----Osvětlení / Elektrika: * EBS multi-napěťový systém s 12 & 24 V elektroinstalací * 15-pólová elektrická zástrčka * LED osvětlení 12 / 24 V * Odnímatelný LED maják vzadu * 2 LED couvací světlomety (spínané přes zpátečku) ----Všeobecné příslušenství: * Manometr - ukazatel tlaku pro určení zatížení (nápravy oddělené do 2 okruhů vzduchového odpružení) * Boční ochrana proti podjetí Itedpfxjl Tnu As Agtoh * Výkyvné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední plastové čtvrt-blatníky se zástěrkami * Zadní rovné galvanizované ocelové bočnice se zástěrkami * Reflexní obrysová páska po stranách i vzadu * Skříň na nářadí z pozinkovaného plechu, černě práškově lakovaná (cca 1000 mm široká, 600 mm hluboká, 300 mm vysoká) ----Ložná plocha: * Přední část před točnou cca 490 mm dlouhá se 45° rohy * Svařovaný ROBOT protiskluzový povrch na ocelové desce točny * Podlaha z tvrdého dřeva v pojezdové oblasti hlubokoložné plošiny ----Zajištění nákladu (La-Si balíček obsahuje): * Před nosníkem čela vlevo & vpravo vždy 1x 13,4 t UVV kotevní oko * Na každé straně 4 otvory v točně s kotevní silou 2 t * 1 pár kotevních ok (13,4 t) zavěšených vzadu vlevo & vpravo před zadním nosníkem * Na každé straně 4 páry UVV kotevních kroužků (10 t), nastavitelné a sklopné, zátěž ve všech směrech, zapuštěné v bočním rámu * Na každé straně 3 kapsy pro sloupky s možností upevnění 2 t ----Sada pro rozšíření: * Žárově pozinkovaná mechanická výklopná ramena pro celkovou šířku 3 m (ne však v zadním šikmém zakončení) * Držák prken pro rozšíření pod podvozkem vlevo v podélném směru ----Odkládací plocha pro rameno rypadla: * Odložení ramene rypadla přes zadní nápravu až k zadnímu nosníku cca 2100 mm dlouhé a cca 190 mm hluboké * Na každé straně 2 páry kotevních ok 6,4 t v odkládací ploše pro rameno rypadla ----RAMPY: * Hydraulicky ovládané jednodílné nájezdové rampy (cca 3000 x 720 mm), mechanicky nastavitelné do strany * Vnější prkna ramp z tvrdého dřeva * Ocelová konstrukce připravená pro šestipákové regulační ventily ----Výška nakládací hrany: * Ložná hrana nenaložená cca 950 mm +/- 20 mm ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Podvozek, točna, výklopná ramena, mechanické podpěry a nájezdové rampy žárově zinkované * Nápravy, vzdušníky, tažná lišta lakované v černém odstínu ----Informace: * Vozidlo má denní registraci 07/2024, kvůli chybějícímu systému kontroly tlaku v pneumatikách nebylo zatíženo ani použito * Nové vozidlo, záruka výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ---- Braking system: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ---- Drawbar / Flange drawbar eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into underrun protection ---- General attachments: * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards ---- Tipping body: * 3-way tipper body made of fine-grained steel for pallets, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed smooth steel front wall * Hard wood plate for excavator bucket mounted on the front wall * Continuous side walls – without centre posts – foldable with spring-assisted side boards, and pendulum system via manual central locking * Rear stanchions bolted * Combined steel double wing rear doors, asymmetrically split, swingable up to 270° and lockable, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary bar lock and central locking, deactivation function for automatic tailgate opening when tipping in reverse with open wing door Itsdpfx Agevin T Setsh * 4 mm steel floor plate * Two-step access at front left * Mounting rail at the rear for loading ramps ---- Load securing: * One 7 t lashing point at each corner * Four 3 t lashing points recessed into the side outer frame on each side ---- Loading ramps: * Recessed mounting compartment for loading ramps at the rear of the chassis * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ---- Painting: * Chassis, drawbar, rear stanchions, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanized * Side wall colour can be selected in any desired RAL shade (no special or metallic paint); modifiable up to approx. 6 weeks before completion * Axles, air tanks, flange drawbar eye, front landing gear painted in black ---- Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 45 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 31 300 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2019, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 3 050 mm, celková šírka: 2 550 mm, Výbava: ABS, Meusburger MPG-3 Nízkozdvižný príves s plachtou, riadená/zvýšená náprava Vybavenie: vzduchové pruženie * Váha nápravy * 1. náprava zdvíhacia * 3. náprava riadená * Hydraulická rampa s prídavným podperou a diaľkovým ovládaním * Prejazdová rampa * Elektrický navijak s diaľkovým ovládaním * Edscha strecha * Úložné boxy na oboch stranách * Rezervné koleso v cestnej výbave * Prídavné reflektory * Rozťahovacie tabuľky šírky Ijdpfx Aowfwd Djgtjth Bezpečnosť: ABS * EBS * Kotúčové brzdy Možnosť omylu a predchádzajúceho predaja vyhradená. Interné číslo vozidla: 8303

Stav: použitý, maximálna hmotnosť nákladu: 16 950 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2006, ďalšia kontrola (TÜV): 04/2026, Rok výroby: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: We offer: Net purchase for companies within the EU holding a VAT ID number and for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of temporary and export license plates. Itedpeyv Ug Dsfx Agtoh Transport to the port. All prices advertised are gross prices and already include the statutory VAT of 19%.

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Isdpsl Thxdjfx Agtsth * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN Iedpfsrwc R Rsx Agtoth ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: Isdpfx Ajl Thyxegtoth * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: Itjdpexptn Djfx Agtsh * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest Ijdol Tihuopfx Agtsth ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Ijdpfxel Th Ade Agteth * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders Ijdpfxsl Thymo Agtsth * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: Itjdpfx Aerwc R Aogtoh * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Brzdy: * Wabco EBS (elektronický brzdový systém) * Nouzové odpuštění pružinových válců * Bubnové brzdy ----Nápravy: * 2x 7t Gigant nápravy ----Odpružení: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oje / přípojný čep: * Tažná oje výškově stavitelná o 300 mm s přípojným čepem 40 mm / přírubou ----Elektroinstalace / Osvětlení: * 15pólová zástrčka Itedpfsx Hm Rcox Agtsh * LED koncová světla 12/24 V * Monitorování tlaku v pneumatikách s možností zobrazení v nákladním voze přes signál EBS (není nutná instalace na vozidle) ----Obecné příslušenství: * Jost mechanický opěrný naviják vpředu * Vzadu 2 mechanické sklopné stabilizační nohy * Plastová sada nářadí cca 750 x 350 x 300 mm vpředu na pravé straně podvozku * Šroubovaný podjezdový ochranný rám * Plastové čtvrtkové blatníky ----Sklápěcí nástavba: * Síťové háky v ložiskách centrálního uzamčení a 2 kusy na čelní stěně * Ocelová paletová 3stranná sklápěcí nástavba s vyztuženými Strong bočnicemi (spojité horní bočnice s vnitřním trubkovým vyztužením, bez středových sloupků, sklopné s plynovým tlumičem) * Šroubované zadní sloupky * Kombinovaná ocelová křídlová zadní stěna, dvoukřídlová, asymetricky dělená, otočná o 270° a aretovatelná (nelze sklopit), s přídavným kyvným rámem pro automatické otevření zadní stěny při sklápění, zamykání přes pozinkovaný otočný uzávěr a centrální zamykání, deaktivace automatické funkce zadní stěny při sklápění dozadu s otevřenými křídlovými dveřmi * 4 mm plechová podlaha z jemnozrné oceli ----Zajištění nákladu: * V rozích vždy 1x 5t upevňovací oko * Po stranách vždy 4x 3t zapuštěných upevňovacích ok v vnějším rámu ----Podvozek: * Podvozek z jemnozrné oceli ----Rámpy: * Vzadumountovaná kolejnice pro najížděcí rampy * 1 pár hliníkových najížděcích ramp cca 3570 x 410 mm (nosnost 10 t/pár) vhodné pro gumová i pásová vozidla * Uzamykatelný úložný prostor pod ložnou plochou v rámu podvozku pro rampy ----Pneumatiky: * Pneumatiky 358/55 R 19,5 ----Lakování: * Tažná oje, podjezdový ochranný rám, zadní sloupek, zadní sklopné nohy žárově zinkované * Nápravy, pružiny, vzduchojemy a opěrný naviják lakovány černě * Bočnice lakovány v požadovaném odstínu RAL (bez speciálního nebo metalického laku), barvu lze změnit do cca 6 týdnů před dokončením ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu * Změny a omyly vyhrazeny, mezitímní prodej možný * Ilustrační fotografie ----Dodací lhůta: * K dispozici ihned od 29. týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Braking system: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders Ijdpfx Agjx Hm Rietoth * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal - no truck-side installation required - ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side on the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks at central locking bearings and 2 on the front wall * Steel pallet – 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal pipe reinforcement, no centre stanchions), fold-down with drop side spring lifter * Rear stanchions bolted * Combination steel wing door rear panel, 2-leaf, asymmetrically split, swivels and locks up to 270°, not fold-down, with additional pendulum frame for automatic rear wall opening during tipping, locking by galvanized rotating bar catch at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with wing door open * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 ton lashing point in each corner * 4 x 3 ton recessed lashing rings on each side in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting rail for access ramps * 1 pair aluminium access ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading surface, recessed in the chassis for the ramps ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Side panel paintwork in a RAL colour of choice (no special or metallic paintwork). Can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to error and prior sale * Sample images ----Delivery Time: * Available immediately from CW 29/2026

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) Itedpfxswh Hdxe Agtjh * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: použitý, maximálna hmotnosť nákladu: 10 080 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2017, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, objem nakladacieho priestoru: 6 m³, Rok výroby: 2017, Výbava: ABS, Skladové číslo: 5820 Müller-Mitteltal 3-stranný oceľový tandemový sklápací príves / hliníkové nájazdy / pozinkované šasi / široké pneumatiky! Itedpszdm S Sjfx Agteh ---- * Výrobca: Müller-Mitteltal * Typ: KA-TA-R 13,5 * Prvá registrácia: 08/2017 * Celková hmotnosť: 13 500 kg * Prevádzková hmotnosť podľa osvedčenia: 3 420 kg * Nosnosť: 10 080 kg * Nápravy: 2x Gigant / bubnové brzdy * Odpruženie: listové pružiny * Pneumatiky: 385/55 R 19.5, cca 50% na oceľových diskoch * STK platná do: 08/2026 * EBS * Farba: šasi pozinkované, sklápacia nadstavba modrá * Vnútorný priestor sklápacieho korby: cca 6m³ (5,00 m dĺžka x 2,42 m šírka x 0,50 m výška) * Výsuvné hliníkové nájazdy * Ťažné oko 50 mm, výškovo nastaviteľné * Sklápacia nadstavba so 4 pármi výklopných úchytných ôk v podlahe * Predná podpera pre plné zaťaženie * Dodatočné zadné podpery (sklopné) * Nerezový úložný box vpredu vpravo * Štvrtinové blatníky * Certifikát na zabezpečenie nákladu * Prvý majiteľ Nemecký príves!! Nemecké doklady!! 1. majiteľ!! Poznámka k možným chybám v inzercii: Napriek starostlivému spracovaniu inzerátu sa môžu v texte alebo údajoch ojedinele vyskytnúť chyby. Nezodpovedáme za omyly, zmeny alebo medzipredaje. Všetky informácie sú bez záruky. Prosím, kontaktujte nás za účelom overenia údajov alebo zodpovedania ďalších otázok.

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform Itsdeq Dyvcjpfx Agteh * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement Itsdpfx Agotplv Njtoh * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of air suspension during tipping (can be deactivated via control unit in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tires: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation Ijdpfx Asy Tr Hiogteth ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with elevated support for connection lines ----General Attachments: * Front support winch * Bolted steel underrun protection * Plastic quarter fenders in front of the first and behind the last axle * Removable protective grid for rear lights (not approved under the German Road Traffic Licensing Regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel 3-way tipper body (fixed front wall, continuous side walls without central stanchions, right side wall swinging via central lock and foldable with drop-side spring assist * Left side wall foldable with drop-side hydromatics * Rear tailgate swinging via automatic hook lock * 5 mm steel floor plate made of HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, support winch, flange drawbar painted in black tone * Tipper body painted in a RAL custom color of choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion * Chassis, protective grid for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery Time: * The vehicle is still under construction and will be completed in calendar week 44 / 2026, provided uninterrupted and consistent production

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-assist for maneuvering purposes on the 1st axle (engaged via EBS) * 1st axle as a lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated via a control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * LED rear lights 12/24V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling, mm ----Coupling Height: * Coupling height approx. 440 - 550 mm loaded, with raised gantry for connecting lines ----General Attachments: * Support winch at the front * Bolted steel underrun protection * Plastic quarter mudguards in front of the 1st and behind the last axle * Removable guard for tail lights (not permitted for use on public roads as per national traffic regulations and must be removed before entering public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel 3-way tipper body (fixed headboard, continuous side walls—without central stanchions—right side wall hinged with central locking and foldable via drop-side spring bar, left side wall foldable with drop-side hydraulic system) * Rear tailgate hinged with automatic hook locking * 5mm steel floor plate made from HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t lashing rings per side, recessed into the external frame in accordance with accident prevention regulations (UVV) Ijdpsy Tr Hcefx Agtoth ----Painting: * Axles, air tanks, support winch, flange eye painted in black * Tipper body painted in a chosen RAL standard color (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Chassis, guards for tail lights, hot-dip galvanized ----Information: * Sample images ----Delivery Time: * The vehicle is still under construction and, assuming uninterrupted and consistent production, will be completed in week 44 / 2026.