Kässbohrer Tieflader Ausfahrbar 4 M Mit Hydrl. Rampen kúpiť použité (59 149)

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026 Hedsylfvgepfx Anrjl

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation Hodsrczm Dspfx Anrel * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) Hjdol Th Evopfx Anrel * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy Hjdpfswmpbdsx Anrjl - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: nový, pohotovostná hmotnosť: 2 980 kg, maximálna hmotnosť nákladu: 7 520 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 280 mm, šírka ložného priestoru: 2 480 mm, zavesenie: oceľ, veľkosť pneumatiky: 245/70 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 245/70 R 17,5, veľkosť zadnej pneumatiky: 245/70 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, rampa cca 2.700 mm dlhá x 900 mm široká, rampy s roštami, nakladacia výška: 840 mm, 10 upevňovacích očiek po 2,5 t, 8 x upevňovacie očká po 6 t, oceľové bočné steny, sklápateľné a odnímateľné, drevené dosky 50 mm, zadná časť ložnej plochy so sklonom, vnútorná šírka ložnej plochy 2.480 mm, zadný stĺpik odnímateľný, predná časť priechodná na nakladanie, dostupné aj s dĺžkou ložnej plochy 6.300 mm!!, nájomné od 500 €, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, More Details: ! Hedpfx Asyyy T Donrjl

Stav: použitý, najazdené kilometre: 559 430 km, výkon: 368 kW (500,34 k), prvá registrácia: 08/2019, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, pohon všetkých kolies, sadzový filter, MAN 18.500 TGS SZM 4x4 Odpruženie: listové-listové Rázvor: 3,60 m Užitočné zaťaženie: 9 547 kg Výbava: - Hydraulické čerpadlo - Motorová brzda - Digitálny tachograf - Vyhrievané sedadlo - 1x lôžko - Chladnička - Rádio-CD-Media-Navi-USB-AUX - Elektrické ovládanie okien - Posuvná strecha - Slnečná clona Hsdsy Hyqiepfx Anrel Radi vám pomôžeme aj v oblasti financovania/leasingu s našimi partnermi. Všetky údaje bez záruky. Zmeny a medzičasný predaj vyhradené.

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 8 000 kg, maximálna hmotnosť nákladu: 39 000 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 13 000 kg, dovolené zaťaženie nápravy (náprava 2): 13 000 kg, povolené zaťaženie nápravy (náprava 3): 13 000 kg, prvá registrácia: 07/1983, dĺžka ložného priestoru: 11 870 mm, šírka ložného priestoru: 2 500 mm, zavesenie: parabolický list (pružina), farba: biely, Rok výroby: 1983, Návves CTC ZA90SRT47 Hodpfjy Axufex Anrol Nízkozdvižný náves 11,87 m s hydraulickými rampami a navijakom (4,10 m + 7,35 m) 3 nápravy Parabolické odpruženie Celková prípustná hmotnosť 47 000 kg – užitočné zaťaženie 39 000 kg Pre špeciálne prepravy povolená súprava 56 000 kg Exportná cena bez DPH: 18 000,00 eur Všetky údaje sú bez záruky/ možnosť omylu vyhradená.

Stav: nový, pohotovostná hmotnosť: 3 050 kg, maximálna hmotnosť nákladu: 9 950 kg, celková hmotnosť: 13 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 280 mm, šírka ložného priestoru: 2 480 mm, zavesenie: oceľ, farba: iný, typ prevodu: iný, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each rated at 2.5 t, 8 lashing eyes each rated at 6 t, steel drop sides, foldable and removable, wooden planks 50 mm thick, rear loading area chamfered, internal loading width 2,480 mm, removable rear stanchion, through-loading possible at the front, also available with 5,300 mm loading length!! Rental price from €550, -- errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Hodpoywx Uzsfx Anrsl

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (TPMS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles Hedpfxoq Dyu Uo Anrol * Air suspension with lift and lowering function * Mounting provisions front (bulkhead) and rear slant for retrofitting container locks for 20" container transport * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped design * Bulkhead with provisions for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls of steel sheet (trapeze-profiled), foldable, with central folding stanchion * Removable steel rear wall, slides between ramps – stored inside at bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t drop-forged lashing brackets every 600 mm * Profifix lashing rail along the central axis for lashing capacity up to LC 3000 daN * Each front and rear corner with one 10 t lashing ring * Lashing package: each side with two 8 t foldable lashing rings in the outer frame; various holes in bulkhead and rear cross member for 1.2 t lashing options * Single-piece mechanical grid ramp with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Rear approach angle/chassis slope approx. 860 mm * Drawbar, bulkhead, rear flap, foldable supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Body paintwork in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and interim sale * Available from week 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 58 860 kg, celková hmotnosť: 73 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný vozový park s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výpis z výbavy. Kompletnú výbavu poskytneme na požiadanie. Labutí krk: * Labutí krk so skosenými rohmi vpredu cca 45° a so zadným zrezaním cca 750 mm x 10° * 3 páry viazacích ôk (LC 5 000 daN). Podlaha z tvrdého dreva, hrúbka cca 30 mm Nakladacia plocha v vysúvateľnom prevedení: * Nakladacia plocha v vysúvateľnom prevedení so zadným zrezaním cca 500 mm x 8° * 8 párov výklopných viazacích ôk na vonkajšej strane (LC 10 000 daN) * 1 pár ležatých viazacích ôk vpredu na nakladacej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme nakladacej plochy na uchytenie upínacích pásov (LC 2 000 daN) * Podlaha z tvrdého dreva, hrúbka cca 48 mm, nad nápravami podlaha z ryhového plechu Dvojdielne oceľové rampy: * Jeden pár pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 900 mm, s gumovým povrchom Super Grip * Rampa s hydraulickými sklápateľnými a vysúvateľnými dielmi * Hydraulický zdvih, hydraulicky posuvný * Maximálne zaťaženie na pár: 50 000 kg * V súlade s nariadením 1230/2012/EÚ rampy s dĺžkou menšou ako 300 mm nemusia byť v jazdnej polohe započítané do dĺžky vozidla 16 500 mm Nápravy: Hedpfx Aney Augwsrel * BPW nápravy a podvozok, 1. náprava riadená dopredu, 2. a 3. náprava pevná, 4. a 5. náprava riadená dozadu, vzduchové pruženie so zdvíhacími/spúšťacími funkciami, bubnové brzdy * Riadené zadné nápravy s elektromagnetickou blokáciou cúvania – aktivácia cez spätný chod alebo manuálne * Technická nosnosť nápravy: každá 12 000 kg Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém monitoringu tlaku v pneumatikách TPMS podľa ECE R 141. Prenos údajov do ťažného vozidla cez štandardizované rozhranie EBS podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné prijímať a zobrazovať tieto údaje Podpery návesu: * Mechanical JOST podpery s 2-rýchlostnou prevodovkou, zdvihová nosnosť cca 24 t (skúšobná nosnosť cca 50 t) Brzdový systém: * Wabco brzdový systém podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích vedení k ťahaču Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele * Oceľové kvality: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektroinštalácia: * Elektroinštalácia podľa predpisov EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikanie s ukazovateľom smeru * ASPÖCK-UNIBOX na prednej prípojnej lište so zásuvkami 24N, 24S a 15 pólov. Pripojenie podľa ISO: 24N ISO-1185, 24S ISO-3731, 15 pinov ISO-12098 Lakovanie: * Kompletná oceľová konštrukcia po zváraní automaticky otryskaná tryskacím zariadením * Druhé otryskávanie s korundom pre optimálnu priľnavosť náterového systému * Metalizácia HRM celého podvozku ZINACOR 850 (85% zinok/15% hliník) na zabezpečenie najlepšej antikoróznej ochrany * Finálny vrchný lak 2 vrstvy dvojzložkového náteru, jednoliata farba RAL 3002 karminovo červená podľa RAL systému 841GL * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Vrátane nasledovného príslušenstva: * 2” konštrukčný čap (king pin) * Pozinkovaná čelná stena z ocele, výška cca 400 mm * Držiak rezervného kolesa pred čelnou stenou * Na pozinkovanej prípojnej lište vpredu žlto-červené vzduchové spojky * Držiak pre výstražné majáky na zadnej časti prívesu * Pozinkované podpery pod sklonom nakladacej plochy * Gumový povrch Super Grip 2

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) Hsdpfxsi Ai E Rs Anrol - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2005, farba: čierny, Rok výroby: 2005, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = Hodpjxw T Uasfx Anrsl - Náprava s dvojitými kolesami - Rezervné koleso = Ďalšie informácie = Hrubá hmotnosť: 8.900 kg Užitočné zaťaženie: 26.100 kg CELKOVÁ HMOTNOSŤ: 35.000 kg Predajná cena: € 18.000, US$ 21.210

Stav: nový, celková hmotnosť: 78 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 850 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck in SNT design for load area length optimization, approx. 3,700 mm long, tapered at the rear approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2, and 6 x 4 Load area: • Load area with extendable design, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load area and extending into the taper for excavator dipper stick accommodation, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards • Hardwood covering on the tapered rear of the load area • Ramp with hardwood covering • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer ramp frame Hodsrvw U Sepfx Anrel Axles and tyres: • TWINAXLE-II independent wheel suspension with BPW axle stubs, 1st axle with steering control ahead of pivot, all other axles hydromechanically forced steering • 1st axle with electromagnetic reverse lock activated via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle levelling, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Yellow-red air couplings on the front connection bar • 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of lying lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Hardwood covering approx. 40 mm thick over the gooseneck, checker plate covering over the kingpin • 3.5" kingpin • Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide • Load area locking with conically welded locking profiles every 250 mm • Pre-tensioning plate included • 1 pair of lashing rings on the front cross member • 8 pairs of recessed lashing rings in the outer frame of the load area, foldable to the outside • Extensions (galvanized) extendable by approx. 230 mm each side • 1 pair of fixed wheel recesses, open up to extension, approx. 700 x 410 mm, in the load area in front of the 1st axle • Wheel recesses with sheet steel covering and square climbing strips 15 x 15 mm, spaced approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the load area between the 1st and 2nd axle • Wheel recesses with square climbing strips 15 x 15 mm and extensions in the lower section • ALU covers for wheel recesses between the 1st and 2nd axle, can also be used as extension planks • 1 pair of mechanical rear supports • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the rear taper of the load area • Central lubrication system with 1 pump, brand BEKAMAX, with standard grease per NLGI-2 • Radio and wired remote control, with 2 indicator lights on the receiver as single track control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 4 680 kg, maximálna hmotnosť nákladu: 13 320 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 750 mm, šírka ložného priestoru: 2 350 mm, výška ložného priestoru: 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 245/70 R17,5, | Möslein tandemový sklápací nízkozdvižný príves DTD 18 Schwebheim | Trojstranný sklápací príves s výsuvnými rampami | Nosnosť 13 320 kg | Výškovo nastaviteľné oj | ABS | Dĺžka ložnej plochy: 5,75 m, šírka: 2,35 m, výška bočníc: 0,60 m | Sklopné zadné podpery | Pneumatiky: 435/50 R19.5, nápravy BPW | Chyby, omyly a predchádzajúci predaj vyhradené. Hedpfx Aexztrmonrjl

Stav: použitý, maximálna hmotnosť nákladu: 2 100 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/1996, Int. č.: B - 11 Na objednávku zákazníka Beyer * BMH 30.4 * Nízkozdvižný príves * Nájazdové rampy * 2-nápravový * povolená celková hmotnosť 3000 kg * ŤAŽNÉ ZARIADENIE guľová hlava * vo výbornom stave, málo používaný Hsdoxvf Upopfx Anrol Možná protihodnota Financovanie od 3,99% Omyly a medzipredaj vyhradené! Uvedené údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako potvrdené vlastnosti. Predajca nepreberá zodpovednosť za preklepy a chyby v prenose dát. Uvedené vybavenie je potrebné overiť osobitne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celého Nemecka na požiadanie Otváracie hodiny: Pondelok – Štvrtok: 9:00-17:00 Piatok: 9:00-14:00 a podľa dohody!

Stav: nový, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 12 300 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, Wiese 2-Axle Step Frame Trailer in Telescopic Version with Fassi Crane F545RA.2.26 Mega Lowliner as step frame trailer. Chassis Welded construction with crossmembers, made entirely of high-quality steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles, each with 10,000 kg load capacity, equipped with 17.5" drum brakes ABS: one axle equipped with sensor Axle spacing: 1,810 mm both axles with forced steering Tyres 8x 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centered, offset = 122 mm Lighting System 24V lighting system compliant with EU directive 76/756/EEC and amendments, featuring: 2x2 three-chamber LED rear lights 1x LED reversing light 1x LED fog light LED side marker lights Lane keeping lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket wired per EU standard Floor Anti-slip phenolic plywood flooring Steel chequer plate in axle area Load Securing External frame with D030 mm lashing hole profile on the bevel 2x12 lashing points 8,000 daN in the outer frame 3x combi stake pocket rows for 80x80 mm stakes in the low bed Accessories 2x wheel chocks with holder Spare wheel holder winch 2x toolboxes with pull-out drawer (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Hsdeyihgyopfx Anrel Additional support beams 360° working range approx. 100% capacity to the front side The attached images are sample images. We manufacture crane trailers in a variety of versions. For further information, please do not hesitate to contact us. Upon request, we will send you a quote based on your required specifications.

Stav: nový, maximálna hmotnosť nákladu: 30 310 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, NOVÉ VOZIDLO Fliegl 4-nápravový nízkoložný návěs s 2 páry kolových výklenků a rampami Celková hmotnost: 40 000 kg Užitečné zatížení: 30 310 kg Provozní hmotnost: 9 690 kg Celková délka: 12 000 mm Ložná délka: 10 000 mm Ložná plocha: 7 150 mm včetně 850 mm náběhové rampy Ložná výška: 900 mm 1. pár kolových výklenků za schodem v ložném prostoru, spodní délka cca 1 600 mm, hloubka 400 mm 2. pár kolových výklenků mezi nápravami v ložném prostoru, spodní délka 600 mm, hloubka 300 mm Hodpenzlg Defx Anrsl Rozšíření na 3 000 mm, výstražné tabule, výstražné majáky, Velký vázací balíček 5 párů kapes na sloupky ve vnějším rámu Výklenek na rameno bagru, délka 1 800 mm, hloubka 150 mm Tažná oj 50 mm Vzduchové odpružení s ventilem pro zvedání a spouštění, samostatně ovladatelné BPW bubnové brzdy Pneumatiky 235 / 75 R 17,5" Zjišťování nápravového zatížení přes EBS CAN Bus signál, Trailer Info Center Rampy 2 800 mm × 750 mm s hydraulickým ovládáním Hydraulický boční posuv Nabídka operativního leasingu: doba trvání 48 měsíců, zůstatková hodnota 40 %, akontace pouze DPH ze splátek nájmu, měsíční splátka 970,00 EUR bez DPH Vozidlo je k dispozici od 11.09.2023 po veletrhu Neumünster. Navštivte nás na veletrhu Nordbau – stánek West 121, přímo u hlavního vchodu. Další nové i použité 3-, 4- a 5-nápravové nízkoložné návěsy ihned k dispozici.

Stav: nový, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 12 300 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, Wiese 2-axle step-frame flatbed lowliner with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross members, made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross bracings Axles 2 BPW axles, each rated for 10,000 kg load capacity, with 17.5" drum brakes ABS: 1 axle with sensing Axle spacing: 1,810 mm Tyres 8 x 235/75 R17.5 Wheels Aluminium rims, 10-hole, hub-centred, offset = 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC et seq. including: 2x2 triple-chamber LED tail lamps 1x LED reversing lamp 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Hodpfen Hrtgox Anrsl Flooring Galvanized grating on the low-bed section Steel chequer plate in axle area Load securing Outer frame with D30 mm lashing hole profile on the slope 2x12 lashing points, 8,000 daN each, in the outer frame 3x rows of pocket stakes for plug-in stanchions 80x80 mm in the low-bed section Accessories 2x wheel chocks with holders Spare wheel holder with winch 2x toolboxes with pull-out drawer (for chain storage) Surface protection Steel construction: blasted and primed Finish Chassis/frame/lower frame: single colour RAL 3020 (traffic red) Axle hubs: single colour RAL 3020 (traffic red) Axles: KTL-coated, black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% reach to the front For further information, please do not hesitate to contact us.

Stav: nový, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 12 300 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, Wiese 2-axle step-frame flatbed lowliner with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross members, made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross bracings Axles 2 BPW axles, each rated for 10,000 kg load capacity, with 17.5" drum brakes ABS: 1 axle with sensing Axle spacing: 1,810 mm Tyres 8 x 235/75 R17.5 Wheels Aluminium rims, 10-hole, hub-centred, offset = 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC et seq. including: 2x2 triple-chamber LED tail lamps 1x LED reversing lamp 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Flooring Galvanized grating on the low-bed section Steel chequer plate in axle area Load securing Outer frame with D30 mm lashing hole profile on the slope Hsdjt Izpyspfx Anrol 2x12 lashing points, 8,000 daN each, in the outer frame 3x rows of pocket stakes for plug-in stanchions 80x80 mm in the low-bed section Accessories 2x wheel chocks with holders Spare wheel holder with winch 2x toolboxes with pull-out drawer (for chain storage) Surface protection Steel construction: blasted and primed Finish Chassis/frame/lower frame: single colour RAL 3020 (traffic red) Axle hubs: single colour RAL 3020 (traffic red) Axles: KTL-coated, black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% reach to the front For further information, please do not hesitate to contact us.

Stav: nový, pohotovostná hmotnosť: 410 kg, maximálna hmotnosť nákladu: 1 590 kg, celková hmotnosť: 2 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 010 mm, šírka ložného priestoru: 1 530 mm, výška ložného priestoru: 1 200 mm, objem nakladacieho priestoru: 5,4 m³, farba: iný, stavebná výška: 1 740 mm, pracovná šírka: 2 040 mm, Manufacturer: Brenderup Hodpfx Ansuy Hwnorsl Model: Brenderup 2300S, 2300STB2000 Low Loader Steel Gross Vehicle Weight: 2000 kg, braked tandem axle Payload: 1590 kg Unladen Weight: 410 kg Body Dimensions: 3010 x 1530 x 400 mm With mesh extension sides, 800 mm high Tyres: 13-inch Loading height: 540 mm With folding front panel 13-pin plug included With overrunning brake and reverse drive automatic Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn and Neptun Upon request, we offer a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability for errors or misprints. Features: Reverse drive automatic, rubber suspension axle, independent wheel suspension, jockey wheel, marker lights, fully hot-dip galvanized frame, braked, including warranty. Brenderup uses galvanized components to optimally protect the trailer against rust. Robust corner lever latches, V-shaped safety drawbar, 6 internal lashing eyes, braked, 13-pin plug with reversing light, protected multifunction light, 40 cm steel side walls, with mesh extension sides, 800 mm high.

Stav: použitý, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 6 100 mm, šírka ložného priestoru: 2 000 mm, výška ložného priestoru: 400 mm, * Demmler TT 119 tandemový nízkozdvižný přívěs pro přepravu fréz * První registrace: 2013 * Podpěra pro dopravník * Vzduchové odpružení Hsdpot Ux Dbefx Anrol * Nastavitelná oj * 3 rampy * Užitečné zatížení: 8 900 kg * Pohotovostní hmotnost: 3 000 kg * Celková hmotnost: 11 900 kg * Rozměry ložné plochy: 6,10 m x 2,0 m x 0,40 m * Nakládací výška: 70 cm * Délka rampy: 2,50 m

Stav: použitý, maximálna hmotnosť nákladu: 18 000 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1991, dĺžka ložného priestoru: 8 200 mm, šírka ložného priestoru: 2 500 mm, Výbava: ABS, * ABS * BPW nápravy ----Nástavba: nízkozdvižný přívěs (2200+6000 mm), výška ložné plochy cca 900 mm, zadní část zkosená, nájezdová výška cca 750 mm, ocelovo-dřevěná podlaha, rozšiřitelný na 3 m, odpružené nájezdové rampy, upevňovací oka. Prodej pouze podnikatelům. PŘI EXPORTU JE TŘEBA UHRADIT POUZE ČISTOU CENU BEZ DPH!!!!! VEŠKERÉ ÚDAJE JSOU BEZ ZÁRUKY, ZVLÁŠTĚ TÝKAJÍCÍ SE VÝBAVY A PŘÍSLUŠENSTVÍ. Základem všech kupních smluv, faktur, proforma faktur, objednávek a prodejních jednání jsou naše VOP (viz tiráž/impressum). Hjdowdb Ttspfx Anrol

Stav: nový, maximálna hmotnosť nákladu: 45 250 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Hodpowx Dbijfx Anrel Excerpt from the equipment list. Full equipment details available on request. Chassis, cranked: * Special steel frame made of high-strength fine-grained steels, electrically welded at the joints * Well-dimensioned outer frame, 4-axle configuration * Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked section for maximum low-bed length in combination with AluLeg drop supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stake widening: * DINKEL special body * Self-supporting aluminum roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes can be widened for loading and unloading to approx. 4,200 mm * Three sliding stakes per side with rubber tension compensation * Additional center stake lockings in the roof rail and park position, operated by pull cable and spring bolt * DINKEL mechanical height-adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments via stake adjustment * Front overlap at the bulkhead for driving under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the sides, lower pockets for 450 mm slats, above four rows of single pockets. In the high-bed area only three rows of insertable slats, spacing evenly distributed Floor: * Approx. 27 mm special water-resistant glued beech plywood anti-slip boards, rough surface * Steel sheet in the wheel area. Forklift-trafficable according to DIN standard * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EU standard 71/320 EEC incl. PREV (parking release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator * Including WABCO tire pressure monitoring Axles: * 4 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. wheel holder * Without spare wheel Lighting: * As per EU standard including LED side marker lights * Position lamps in LED version * 2 additional reversing lights * 2 working lights on inside front wall, upper Paintwork: * Chassis and body painted in single color RAL 3002 carmine red * Center stakes and axles KTL coated in black * Corner stakes galvanized * Plastic parts black * Galvanized parts unpainted * Rims factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operated on the trailer * Oversize marking signs for front and rear made of galvanized, infinitely extendable design with installed marker lights including sockets for rotating beacons (small plates) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for arbitrarily locking the center stakes * PVC sliding tarpaulins, color similar to RAL 9006 silver, oversize and...

Stav: použitý, maximálna hmotnosť nákladu: 44 980 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2024, ďalšia kontrola (TÜV): 09/2025, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle configuration. Wheel covers over the axles with spray suppression system * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for maximum low-bed length in combination with AluLeg drop-down supports instead of telescopic support winches; max. rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake widening * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic panels * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with rubber tension unloading * Additional center stake lockings in the roof beam and parking position, with pull cable and spring latch * Lifting roof mechanically height-adjustable, stroke roof height approx. 400 mm, operable on both sides or one side only, without opening the opposite side or doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the stakes * Front overlap on front wall for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the sides, lower 450 pockets, above 4 rows of individual pockets * In the high bed only 3 rows of insert slats. Spacing uniformly distributed Floor * Approx. 27 mm special waterproof-bonded beech plywood, rough surface * Steel plate in the wheel housing area * Forklift accessible according to DIN standard (please specify exact standard if known) * Outer frame with flush surface Brakes Hsdpfslthgujx Anrsl * WABCO air brake system with EBS according to EC regulation 71/320 EEC incl. PREV (parking release safety valve) * Spring-loaded brake cylinder as parking brake * Wabco Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes designed for low-loader use * Air suspension with lifting and lowering function, total travel approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electric and mechanical locking Twin tires * 235/75 R 17.5, 16-ply, incl. spare wheel holder; spare wheel not included Painting * Chassis in RAL 3002 red, single color * Center stakes, axles KTL coated black * Corner stakes hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Wheels in factory silver * Body in RAL color, single color Special equipment included * Air suspension in ECAS version, control on the trailer * Oversize signage front and rear in galvanized, steplessly telescopic version with warning lights including sockets for rotating beacons (small signs) * Additional exterior unlocking for sliding roof frame * 4 stake adapters for special outer frame profile, for optional locking of the center stakes * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, for oversize/overheight, flat hooks, tarp folds, locks with pawl/OCS * Rear left telescopic socket for rotating beacon incl. beacon * Outer frame for machine transport with approx. 64 lashing points for 2,000 kg, 3,000 kg, and 10,000

Stav: nový, pohotovostná hmotnosť: 7 320 kg, maximálna hmotnosť nákladu: 22 680 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Load platform length: 8,100 mm, loading height loaded: approx. 900 mm, 20 lashing eyes each rated at 10 t, 14 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring-assist for one-piece ramps, 70 mm thick hardwood floor, storage box with lid for lashing chains or tensioning straps, contour markings in accordance with regulations, spring-loaded parking brake, vehicle chassis fully hot-dip galvanized. Available at extra cost: - Warning signs with lighting and beacon = Price: €800 - Extension to 3 m width = Price: €1,100 - Hydraulic one-piece ramps = €500 Also available from stock with 9 m load platform length and wide version. Hodjy H A N Iopfx Anrol -- Errors, misprints and modifications reserved, sample images -- More data available at: ! More details: !