Meiller 3-Achs Stahlm. Mit E-Verdeck U. Hydr. Heckklappe kúpiť použité (65 729)

Stav: nový, farba: biely, kabína vodiča: iný, typ prevodu: iný, objem nakladacieho priestoru: 18 m³, dĺžka ložného priestoru: 5 700 mm, šírka ložného priestoru: 2 300 mm, výška ložného priestoru: 1 400 mm, Rok výroby: 2011, Location of vehicle: Bovenden, Nedpfx Aovhknioqrolb Body: For MAN and Mercedes-Benz 4-axle chassis from 4200 mm wheelbase, approx. 18.3 m³ ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stav: použitý, najazdené kilometre: 1 001 km, prvá registrácia: 01/2011, celková hmotnosť: 15 600 kg, farba: biely, kabína vodiča: iný, typ prevodu: iný, objem nakladacieho priestoru: 9 m³, dĺžka ložného priestoru: 4 900 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 800 mm, Rok výroby: 2011, Miesto vozidla: Bovenden, oceľová nadstavba, bočný system Bordmatik na ľavej strane, upevňovacie oká. Nadstavba: trojstranný sklápací systém Meiller typ D316 BM s Bordmatik na ľavej strane, demontovaný z vozidla Iveco Trakker AD260T45W 6x6 s rázvorom 3500 mm. Hydraulické prípojky pre sklápací príves vzadu. Údaje o príslušenstve bez záruky, zmeny, predaj počas ponuky a chyby vyhradené! Nledpfxowphy Re Aqreb

Stav: použitý, najazdené kilometre: 1 001 km, typ paliva: nafta, farba: strieborný, kabína vodiča: iný, typ prevodu: iný, dĺžka ložného priestoru: 5 100 mm, šírka ložného priestoru: 2 350 mm, výška ložného priestoru: 900 mm, Miesto vozidla: Bovenden, oceľová nadstavba Nadstavba: trojstranný sklápač, hliníkové bočné steny na pravej strane delené, sklopné a výkyvné, výmenný systém ex 2646 Príplatok za rám selenového závesu EURO 1.500,00 ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmena, predbežný predaj a omyly vyhradené! Nlsdji Rrtwepfx Aqrsb

Stav: použitý, najazdené kilometre: 1 001 km, prvá registrácia: 01/2009, celková hmotnosť: 15 600 kg, farba: červená, kabína vodiča: iný, typ prevodu: iný, dĺžka ložného priestoru: 4 900 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 800 mm, Rok výroby: 2009, Miesto vozidla: Bovenden, oceľová nadstavba, Bordmatik vľavo Nadstavba: Meiller trojstranná sklápačová nadstavba s Bordmatikom vľavo, demontovaná z Daimler-Benz Actros 2646 K 6x4 s rázvorom 3300 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzičasný predaj a chyby vyhradené! Nlsdpfjxfinfsx Aqrsb

Stav: použitý, najazdené kilometre: 1 001 km, prvá registrácia: 01/2007, celková hmotnosť: 15 600 kg, farba: sivý, kabína vodiča: iný, typ prevodu: iný, dĺžka ložného priestoru: 6 200 mm, šírka ložného priestoru: 2 320 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2007, Vehicle location: Bovenden, Body: Meiller 3-way tipper body with Bordmatik on the left, dismantled from Iveco-Magirus Trakker AD410T45W 8x8 with a 4750mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nedpovvbptefx Aqrelb

Stav: použitý, najazdené kilometre: 1 001 km, prvá registrácia: 01/2024, farba: biely, kabína vodiča: iný, typ prevodu: iný, dĺžka ložného priestoru: 4 700 mm, šírka ložného priestoru: 2 410 mm, výška ložného priestoru: 600 mm, Rok výroby: 2024, Miesto vozidla: Bovenden, oceľová nadstavba, upevňovacie oká, výklopné klapky. Nadstavba: Meiller trojstranná sklápačná nadstavba s pružinovo asistovanými klapkami a pneumatickým odistením zadnej klapky. Údaje o príslušenstve sú bez záruky, zmeny, predaj medzičasom a chyby vyhradené! Nlsdpfx Aqewkiw Tereb

Stav: použitý, pohotovostná hmotnosť: 11 130 kg, maximálna hmotnosť nákladu: 36 870 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2019, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5 140J, veľkosť zadnej pneumatiky: 235/75 R 17,5 140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, 4 kapsy na kolesá s krytmi, kotevné oká, elektrohydraulické čerpadlo pre rampy a podpery, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Nlodpey Ulg Eefx Aqreb

Stav: nový, pohotovostná hmotnosť: 7 320 kg, maximálna hmotnosť nákladu: 22 680 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Load platform length: 8,100 mm, loading height loaded: approx. 900 mm, 20 lashing eyes each rated at 10 t, 14 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring-assist for one-piece ramps, 70 mm thick hardwood floor, storage box with lid for lashing chains or tensioning straps, contour markings in accordance with regulations, spring-loaded parking brake, vehicle chassis fully hot-dip galvanized. Available at extra cost: - Warning signs with lighting and beacon = Price: €800 - Extension to 3 m width = Price: €1,100 - Hydraulic one-piece ramps = €500 Also available from stock with 9 m load platform length and wide version. Nodpfx Aqoy Uam Horolb -- Errors, misprints and modifications reserved, sample images -- More data available at: ! More details: !

Stav: nový, pohotovostná hmotnosť: 7 460 kg, maximálna hmotnosť nákladu: 22 540 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy 9 000 mm, výška ložnej plochy pri zaťažení cca 900 mm, 20 upevňovacích očiek po 10 t, 16 vreciek na kolíky v vonkajšom ráme, nájazdové rampy (cca 3 000 x 750 mm), rampy bočne nastaviteľné, plynové pružiny pre jedno-dielne rampy, drevená podlaha hrúbky 70 mm, úložná skrinka s vekom na upevňovacie reťaze alebo upínacie pásy, obrysové značenie podľa predpisov, parkovacia brzda s pružinovým akumulátorom, vozidlo žiarovo zinkované ponorom, vrátane indikátorov zaťaženia náprav. Príplatky za: - Varovné tabule s osvetlením a majákom = cena: 800 € - Rozšírenie na 3 m = cena: 1 100 € - Hydraulické jednodielne rampy = 500 € K dispozícii aj s dĺžkou ložnej plochy 8,10 m a rozšírením. Nlsdpfx Ajy T E Aqjqrjb -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie -- Viac údajov na: !, Podrobnosti: !

Stav: nový, pohotovostná hmotnosť: 7 460 kg, maximálna hmotnosť nákladu: 22 540 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy 9 000 mm, výška ložnej plochy pri zaťažení cca 900 mm, 20 upevňovacích očiek po 10 t, 16 vreciek na kolíky v vonkajšom ráme, nájazdové rampy (cca 3 000 x 750 mm), rampy bočne nastaviteľné, plynové pružiny pre jedno-dielne rampy, drevená podlaha hrúbky 70 mm, úložná skrinka s vekom na upevňovacie reťaze alebo upínacie pásy, obrysové značenie podľa predpisov, parkovacia brzda s pružinovým akumulátorom, vozidlo žiarovo zinkované ponorom, vrátane indikátorov zaťaženia náprav. Príplatky za: - Varovné tabule s osvetlením a majákom = cena: 800 € - Rozšírenie na 3 m = cena: 1 100 € - Hydraulické jednodielne rampy = 500 € K dispozícii aj s dĺžkou ložnej plochy 8,10 m a rozšírením. -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie -- Nledpjy Sn Elsfx Aqrjb Viac údajov na: !, Podrobnosti: !

Stav: nový, pohotovostná hmotnosť: 7 320 kg, maximálna hmotnosť nákladu: 22 680 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Load platform length: 8,100 mm, loading height loaded: approx. 900 mm, 20 lashing eyes each rated at 10 t, 14 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring-assist for one-piece ramps, 70 mm thick hardwood floor, storage box with lid for lashing chains or tensioning straps, contour markings in accordance with regulations, spring-loaded parking brake, vehicle chassis fully hot-dip galvanized. Available at extra cost: - Warning signs with lighting and beacon = Price: €800 - Extension to 3 m width = Price: €1,100 Nlsdpfx Aoy R Riqjqrjb - Hydraulic one-piece ramps = €500 Also available from stock with 9 m load platform length and wide version. -- Errors, misprints and modifications reserved, sample images -- More data available at: ! More details: !

Stav: použitý, pohotovostná hmotnosť: 4 200 kg, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2018, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 550 mm, objem nakladacieho priestoru: 22 m³, zavesenie: vzduch, veľkosť pneumatiky: 245 / 70 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 245 / 70 R 17,5, veľkosť zadnej pneumatiky: 245 / 70 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, 4 × vrecká na stĺpiky na čelnej strane, 5 × vrecká na stĺpiky v strede, 6 párov vreciek na stĺpiky vo vonkajšom ráme, 4 × zasúvacie stĺpiky, 8 párov upevňovacích ôk, predáva sa na objednávku., -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, More Details: ! Nodpfx Aqjy Rlmqerolb

Stav: nový, pohotovostná hmotnosť: 7 460 kg, maximálna hmotnosť nákladu: 22 540 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, s ukazovateľom zaťaženia nápravy, Dĺžka ložnej plochy 9.200 mm, Nakladacia výška naložená cca 900 mm, 20 x kotviacich očiek po 10 t, 16 x vrecká na stĺpiky v vonkajšom ráme, nájazdové rampy (cca 3 000 x 750 mm), protišmykový pás na vonkajšej strane rámp a zadnej šikmine, nájazdové rampy bočne nastaviteľné, pružinový zdvih pre jednodielne rampy, podlaha z dreva s hrúbkou 70 mm, úložná schránka s vekom na upevňovacie reťaze alebo napínacie pásy, obrysové značenie podľa predpisov, parkovacia brzda s pružinovým akumulátorom, vozidlo žiarovo zinkované ponorom, vr. ukazovateľa zaťaženia nápravy, príplatky: Varovné tabuľky s osvetlením a majákom = Cena: 400 €; Rozšírenie na 3 m = Cena: 500 €; Hydraulické jednodielne rampy a hydraulický posuv rámp = Cena: 1 000 €; Prehlbeň na lyžicu bagra = Cena: 1 000 €; K dispozícii aj s ložnou dĺžkou 8,20 m + rozšírenie šírky na sklade. -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky -- Viac údajov na: !, More Details: ! Njdpfxjy Rllys Aqrolb

Stav: nový, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy: 9 000 mm, Naložená výška cca 900 mm, 20 x kotviacich ôk, každé 10 t, 16 x vreciek na stĺpiky v vonkajšom ráme, najazdové rampy (cca 3 000 x 750 mm), nastaviteľná šírka nájazdových rámp, pružinový zdvihák pre jednokusové rampy, drevená podlaha, hrúbka 70 mm, úložná skrinka s vekom na viazacie reťaze alebo napínače, obrysové označenie podľa predpisov, ručná brzda s pružinovým zásobníkom, pojazdný podvozok žiarovo zinkovaný, Príplatky: Výstražné tabule s osvetlením a majákom = Cena: 800 €, rozšírenie na 3 m = Cena: 1 100 €, Nljdpfjy Nirzsx Aqreb hydraulické jednokusové rampy: 500 €, k dispozícii aj s ložnou dĺžkou 8,10 m + rozšírením na sklade. --- Chyby v tlači, omyly a zmeny vyhradené, ukážkové fotografie -- Viac údajov na požiadanie!

Stav: nový, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, s ukazovateľom zaťaženia nápravy, dĺžka ložnej plochy 8 200 mm, ložná výška zaťažená cca 900 mm, 20 x kotviacich ôk po 10 t, 14 x vrecká na kolíky vo vonkajšom ráme, najazdové rampy (cca 3 000 x 750 mm), lepiaca lišta na vonkajšej strane rámp a šikmine zadnej časti, rampy bočne nastaviteľné, pružinový zdvihák na jednoliate rampy, drevená podlaha 70 mm hrubá, odkladacia skrinka s vekom na upevňovacie reťaze alebo pásy, obrysové označenie podľa predpisov, parkovacia brzda s pružinovým akumulátorom, vozidlo ponorene žiarovo zinkované, vrátane ukazovateľov zaťaženia náprav. Príplatky za: výstražné tabule + osvetlenie + maják = cena: 800 €, rozšírenie na 3 m = cena: 1 100 €, hydraulické jednodielne rampy 500 €, hydraulické bočné posúvanie rámp = cena: 1 000 €, výklenok na rameno bagra = cena: 1 000 €. Dostupné aj s ložnou dĺžkou 9,20 m skladom. -- Zmeny, chyby a tlačové chyby vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov na: ! Nodpfx Aqsy Izwtorelb

Stav: nový, maximálna hmotnosť nákladu: 34 350 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment list. Complete specification on request. Chassis: * Welded construction made from high-quality steel profiles with through cross-members for high floor or point load capacity, with heavy-duty outer frame * Rear loading floor designed as a steel welded construction, with two welded-in drive tracks on the outside made of 5-hole perforated steel sheet (Lohr/Rolfo system hole pattern), approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear end of the vehicle features an integrated hydraulically extendable loading platform, extendable by approx. 1,500 mm, constructed in steel welding with 5-hole perforated steel plate (Lohr/Rolfo hole pattern) cover, lamp mounts, and two compartments for ramps with ramp supports * Operation and control of the rear is via an electric hydraulic unit mounted in a stainless steel box on the left side of the chassis, controlled by remote control * Power supply is provided by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the towing vehicle) Coupling device: * 2" king pin, replaceable from below Underride protection: * Rigidly mounted, compliant with EC regulations Nlodjwt Iyljpfx Aqreb Landing legs: * 2 x 12 t landing gears with 2-speed gearbox Axles: * 3 x 9 t air suspension axle units * Manufacturer: SAF with disc brakes approx. 370 x 45 mm * ABS * 10-hole mid-centered wheel connection ET120 * Air suspension total travel approx. 310 mm, raising approx. 220 mm, lowering approx. 90 mm * Air suspension controlled by hand lever with stop function Lifting axles: * 1st and 3rd axles automatically liftable, also controllable via operating panel on chassis frame or via PIN 12 of the lighting socket Tyres: * 6 units, 445/45R19.5, mounted on 14.00x19.5 rim, 10-hole ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axles rear Brake system: * Manufacturer: Wabco * Two-line brake system compliant with EC, incl. EBS, automatic load-dependent regulation * Spring actuators acting as parking brake on 2 axles * Confusion-proof coupling heads permanently mounted to the front cross-member, without connection line to towing vehicle Lighting equipment: * EC-compliant, 24 Volt * Multi-chamber tail lights * License plate lights * LED side marker lights * LED position light white at the front and LED lane marker lights at the rear * Fixed 15-pin socket and 2x7-pin sockets on front cross-member, no connecting line to towing vehicle Load securing: * 9 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, tensile strength approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, tensile strength approx. 2.5 t * Outer frame drilled every 500 mm for lashing straps Stake pockets: * 16 plug-in stakes approx. 100/40 mm, useful length approx. 800 mm Stake pockets: * 8 per side recessed in the outer frame * 4 rows of stake pockets across loading area Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Front wall: * Solid front wall * Stake depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holder * 2x PVC toolbox, approx. 600/400/500 mm * Rear beacon bracket incl. lamp * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, size approx. 1,550

Stav: nový, maximálna hmotnosť nákladu: 37 350 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Výpis vybavenia Podvozok: Zvarená konštrukcia z vysokokvalitných oceľových profilov s prelisovanými priečnikmi pre vysoké zaťaženie podlahy resp. bodové zaťaženie, s ťažkým vonkajším rámom. Nakladacia podlaha vzadu ako oceľová zváraná konštrukcia s dvoma zvarenými nájazdovými lištami z 5-dierového oceľového plechu (systém dierovania Lohr/Rolfo) na dĺžke cca 2 250 mm hydraulicky sklápateľná o cca 350 mm. V zadnej časti vozidla je integrovaný hydraulicky výsuvný nakladací stôl o cca 1 500 mm ako oceľová zváraná konštrukcia s prekrytím z 5-dierového oceľového plechu (systém Lohr/Rolfo), s uchytením svetiel a dvoma priehradkami na rampy a oporu rampy. Pohon a ovládanie zadnej časti prebieha cez elektricko-hydraulickú jednotku, ktorá je namontovaná v nerezovej skrinke na ľavej strane podvozku, s diaľkovým ovládaním. Elektrické napájanie zabezpečuje batéria ťažného vozidla (NATO zásuvka na čelnej stene, bez prepojovacieho kábla k motorovému vozidlu). Závesné zariadenie: 2-palcový „Königszapfen“, vymeniteľný zospodu. Podbehová ochrana: Podľa predpisov EÚ, pevne namontovaná. Stojky návesu: 2x 12 t podperné navijaky s dvojstupňovou prevodovkou. Nápravy: 3x 10 t vzduchom odpružené nápravy, výrobca SAF, kotúčové brzdy cca 370x45 mm, ABS, uchytenie kolesa 10-dierové, centrované, ET120, celkový zdvih vzduchového odpruženia cca 200 mm (zdvih nahor cca 140 mm, dole cca 60 mm), ovládanie vzduchového odpruženia ručne s funkciou STOP. Riadená náprava: 3. náprava je doťahovacia s manuálnou a automatickou spiatočnou blokáciou. Zdvihacia náprava: 1 náprava automaticky zdvihnuteľná, navyše ovládateľná na ráme podvozka alebo PIN 12 svetelnej zásuvky. Obutie: 6x, 445/45R19,5, výrobca podľa nášho výberu, na ráfiku 14.00x19,5, 10-dierové ET120 upevnenie. Blatníky: Podľa EÚ – 1/4 PVC blatník pred a za kolesami 1., 2. a 3. nápravy. Držiak rezervného kolesa: Bez. Brzdový systém: Dvojokruhový brzdový systém podľa EÚ s EBS, automatická regulácia záťaže. Pružinové akumulátory ako parkovacia brzda na 2 nápravách, spoľahlivo zamontované spojovacie hlavy na čelnej priečke, bez prepojovacieho vedenia k motorovému vozidlu. Výrobca: Wabco. Osvetľovacie zariadenie: Podľa EÚ, 24 Voltov, viackomorové zadné svetlá, osvetlenie ŠPZ, LED bočné obrysové svetlá, LED pozičné svetlá vpredu a LED stop svetlá vzadu, 15-pólová zásuvka aj 2x 7-pólové zásuvky pevne na čelnom nosníku, bez prepojovacieho vedenia k motorovému vozidlu. Zabezpečenie nákladu: - 9 párov skladacích upínacích krúžkov, rovnomerne rozdelených, ťažná sila cca 8 t. - 7 párov skladacích upínacích krúžkov, rovnomerne rozdelených, ťažná sila cca 2,5 t. - 2 páry skladacích upínacích krúžkov vzadu na vozidle, ťažná sila cca 2,5 t. - Vo vonkajšom ráme otvory pre napínacie pásy každých cca 500 mm. Zástrčné stĺpiky: 16 ks, cca 100/40 mm, užitočná dĺžka cca 800 mm. Vrecká pre stĺpiky: - na každej strane 8 ks zapustených do vonkajšieho rámu - 4 rady priečnych vreciek pre stĺpiky cez ložnú plochu Podlaha: cca 28 mm Z-tvrdé drevo zapustené do vonkajšieho rámu. Čelná stena: Uzavretá čelná stena, zásobník na 16 podstavcov – cca 100/40 mm. Čelná stena je pri hlavnom ráme skrutkovaná. Vybavenie: - 2 kusy podkladových klinov s držiakom - 2 PVC náradové boxy, cca 600/400/500 mm Njdpoy Up S Sofx Aqrslb - držiak pre rotačné majáky vzadu, vr. svetla - 2 ks LED cúvacích svetiel (vzadu) - 2 ks hliníkové nájazdové rampy, rozmery cca 1 550x400 mm, nosnosť cca 4 000 kg/pár - zaťaženie nápravy na hydraulickom zadku cca 5 000 kg Lakovanie: Podvozok je

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri Nlsdpfx Aqeq Euakorob

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes Nedpfx Astpta Dsqrslb ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible Nedpfx Aox Nli Noqrjlb * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector Nlsdpfx Ajx Nlkgsqrob * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) Nlsdpoykx Nksfx Aqrob ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights Nsdpfxsykx Nqj Aqrelb * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: použitý, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust welded steel frame construction with a front frame offset and level loading platform with rear taper approx. 500x100 mm Nledpfjywv Ixjx Aqreb - 200 mm gooseneck with chamfered front corners - Sloped end of the gooseneck approx. 500 x 100 mm (grip steps on the outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Closed external frame as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm lockable every 500 mm pneumatically - Frame stepped 80x80mm before and after division - Reinforced frame design / point load in retracted state at center of gravity - Without extendable widening sections but prepped for later installation (= guide tubes welded into frame) - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Rear underride guard = extended rear plate - Drop landing legs at the rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle as lift axle (wired via EBS), full automatic confirmation with manual emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally positioned offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Equipment: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in rear plate - 1 ECE board insertable at rear - 11 pairs ZK modules 10t side: - 2x on the gooseneck - 2x on the loading platform before the extension - 7x after the extension - No rear towing eyes - Extendable warning signs including 3 position lights each, front at landing gear and rear before tail plate, steplessly extendable up to load width 4,500 mm - 4 holders for warning signs insertable in stanchion pockets on the loading platform - 6 pairs of side stanchion pockets for 100x50 mm plug-in stanchions - 2 cross rows of stanchion pockets for 100x50 mm stanchions on the gooseneck from outer to main frame (1x before and 1x after king pin positions) - 3 cross rows of stanchion pockets for 100x50 mm stanchions on the loading area from outer to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard - Pre-installed (NATO cable routing, hole pattern for subsequent installation of NATO socket at front of rear plate, and holder on the vehicle) for retrofitting an electrohydraulic unit right rear for possible control of loading ramps Optional: The trailer can be delivered with aluminum loading ramps.

Stav: nový, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 450 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, WIESE 3-axle low-loader with ramps and wheel recesses? NEW Available approx. 4 months after order ---Vehicle Data--- Manufacturer: WIESE * Model: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth wheel load: 12,000 kg * Axle aggregate load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brake: WABCO EBS with RSS ---Dimensions--- * Loading platform length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth wheel section: approx. 3,640 mm * Overall width: 2,550 mm * Loading height at low-bed: approx. 920 mm * Fifth wheel height: approx. 1,250 mm ---Equipment--- * 3 x SAF axles (9 t) with air suspension * 1st axle: lift axle * 3rd axle: trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS braking system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin socket + 2 x 7-pin sockets ---Body--- * Robust steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings (8,000 kg) * Additional lashing points (5,000 daN) * 2 pairs of wheel recesses * Excavator trough * Aluminium plug-in side boards on upper deck * Toolbox at the front ---Ramps--- * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting mechanism Nlsdpfeyuq Igjx Aqrjb * Laterally adjustable ---Miscellaneous--- * Warning panels for over-width up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV inspection certificate We are happy to provide further information upon request.