Faymonville Max Trailer-3-Achs-Mega-Tele-Plateau-Nachlaufgel. kúpiť použité (52 559)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container Hedsyxc Eyepfx Anrel - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 Hsdpfx Aneykpbkjrjl - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 500 kg, dovolené zaťaženie nápravy (náprava 2): 10 500 kg, povolené zaťaženie nápravy (náprava 3): 10 500 kg, prvá registrácia: 11/2022, celková dĺžka: 13 900 mm, celková šírka: 2 550 mm, celková výška: 2 400 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17.5, rázvor náprav: 2 300 mm, Rok výroby: 2022, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS (elektronický brzdový systém) - Zadné vzduchové odpruženie - Rezervné koleso = Poznámky = - Faymonville / Max Trailer 3-nápravový nízkoložný náves (typ: MAX100) - Rozmery ložnej plochy: dĺžka 930 cm x šírka 254 cm - Rozťahovateľný na: 1280 cm (+ 350 cm) - Výška loženia: 91 cm - Zaisťovacie oka (viazacie body) - Blatníky (alebo priestor pre kolesá) - Rozširovacie vložky - Rozmery labutej šije: dĺžka 252 cm x šírka 247 cm x výška 40 cm - Výška loženia: 149 cm - 2 hliníkové nájazdové rampy ALTEC (typ: VFR120) - Rozmery: dĺžka 235 cm x šírka 47 cm - Maximálny nájazdový uhol: 30 % (16,5°) - 10,5-tonové nápravy! - 18 ton nápravového tlaku! - 49,5 tony technická prípustná celková hmotnosť! - STAV NOVÉHO! - Vždy skladované v hale! - Najazdené iba 20 000 km! = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 235/75 17.5 Značka náprav: BPW Odpruženie: vzduchové odpruženie Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; vzor pneumatiky vľavo vnútri: 70 %; vľavo vonku: 70 %; vpravo vnútri: 70 %; vpravo vonku: 70 % Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; vzor pneumatiky vľavo vonku: 80 %; vpravo vonku: 80 % Zadná náprava 3: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; riadená; vzor pneumatiky vľavo vnútri: 70 %; vľavo vonku: 70 %; vpravo vnútri: 70 %; vpravo vonku: 70 % Hedpsyztt Tefx Anrsl Hmotnosti Pohotovostná hmotnosť: 10 069 kg Užitočné zaťaženie: 35 931 kg Celková prípustná hmotnosť: 46 000 kg Údržba, história a stav Počet majiteľov: 1 APK (technická kontrola): platná do 11.2026 Technický stav: dobrý Vizuálny stav: dobrý Identifikácia ŠPZ: OT-87-PP Bezpečnosť produktu Výrobca: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stav: použitý, pohotovostná hmotnosť: 13 200 kg, maximálna hmotnosť nákladu: 52 800 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable platform with rear taper approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for tension strap hooks (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate covering above the axles Axles and Tyres: - BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece Steel Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood cover - Ramps with hydraulically folding sections, hydraulic lifting device, and hydraulically adjustable position - Maximum load per pair: 40,000 kg Included Accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection rail - 4 wheel chocks - One spare wheel - Electro-hydraulic unit - Remote steering control from front and rear via cable remote with push buttons, includes axle alignment monitoring - Mounting points at the rear of gooseneck for ALU drive-on ramps - European reflective warning panels (red-yellow) at the rear of the trailer - White reflective tape in compliance with EU regulations on sides, on extension, and red at the rear - At the gooseneck and ramp sides (left/right) each one mount for warning signs including socket - One mount for beacon at rear of trailer - Galvanized folding supports under loading platform taper - Operating valves for ramps located on the right side of the trailer - Cover plates to bridge the gap between ramps and loading platform - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease - On the gooseneck: ALU side and rear walls approx. 2,440 x 400 mm, pluggable - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350 x 400 x 400 mm on gooseneck, box covers oil filler cap - 4 pairs of WADER container locks in loading platform for one 20ft, 2x 20ft, 40ft or one 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Galvanized platform extensions, extendable by approx. 230 mm per side - Checkerboard climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform taper - Lift axle on front axle, control via TEBS E depending on current axle load and loading status - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm) each with position light - Radio remote control for remote axle steering in addition to cable control, with control lights on receiver for axle tracking Hsdpfjyffd Dex Anrel - Anti-slip sand coating applied on chequer plates on gooseneck and loading platform - 80 km/h speed limit stickers at rear and on both sides

Stav: nový, maximálna hmotnosť nákladu: 90 700 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Our entire vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full configuration available on request. Gooseneck: Gooseneck hydraulically lift/lowerable and removable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook pickups at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design with fixed hardwood floor approx. 50 mm thick, * with drive-over bridge hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axles Hedpow Tgp Dsfx Anrol 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX centralized lubrication for a gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for a 3-axle bogie * Preparation for mounting screw-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Recesses on the outside of the loading platform's outer beams for fitting foldable extensions * One 7-pin socket left and right, front and rear on the rear bogie for warning boards * BEKA-MAX centralized lubrication for a 5-axle bogie * At the rear bogie, a socket for the cable remote control of the rear steering * Rear chassis with trough * 2 LED reversing lights fitted on the rear panel * European warning panels (red-yellow) at the rear * One mud flap at the rear * One LED revolving beacon with bracket left and right on the rear cross member * Two stainless steel toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle ...

Stav: použitý, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 48 650 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with bevel approx. 1,000 mm x 10° Loading deck: - Telescopic loading deck, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - Recess in the loading deck, including into the bevel, for accommodating the excavator dipper stick Ramps: - 1 pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Each ramp can be hydraulically shifted approx. 235 mm outwards and approx. 215 mm inwards - Square anti-slip bars 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles with hydromechanical forced steering - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling the hydraulic functions, excluding hydraulic cable winches - Parking position on the gooseneck for warning boards when not in use - 1 spare wheel - Outer side rail of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck approx. 40 mm thick hardwood floor, over the kingpin checker plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connection panel - 4 wheel chocks Hsdpfsyrfn Njx Anrel - Mechanical landing gear with 2-speed gearbox and crank - Continuous 50 mm hardwood flooring on the loading deck, interrupted between the axles - Deck locking using conically welded locking profiles every 250 mm - Incl. pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for the telescopic tubes with large cross-section; intermediate table with stepped deck and extendable support rails for ALU bridging elements - 1 pair of lashing rings on the front cross-member - 8 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward - Extendable (galvanized) deck widenings approx. 230 mm per side - Wheel recesses with square anti-slip bars, 15 x 15 mm, continuously open in front of the axles up to the gooseneck cross-member, approx. 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging or widening planks for the telescopic section - ALU elements lockable on the telescopic tubes of the extensions - Widenable U-profiles for holding ALU covers - Wheel recesses with square anti-slip bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning boards, approx. 423 x 423 mm - Radio and cable remote control

Stav: použitý, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, Rok výroby: 2024, Výbava: ABS, For every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Gooseneck rear with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the platform and in the bevel to accommodate the excavator bucket stick - Pneumatic locking system with conical locking bolts and reinforced locking positions - Hardwood covering on the platform bevel Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - 20 x 30 mm square climbing bars at intervals of approx. 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS tire monitoring system - TPMS tire monitoring sensors Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic functions - 1 spare wheel - Outer beam on the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, thereafter approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of flat lashing rings in the rear area of the gooseneck - On the gooseneck 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, one plug-in ALU rear board, approx. 400 mm high, anodized - 2" king pin - Round NATO socket on the front connection rail - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank Hsdpfx Anoypb Aksrol - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable (galvanized) extensions by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuously open in front of the axles up to the crossmember of the gooseneck, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminum elements mounted on the extension tubes of the widening sections - Widenable U-profiles for placing the ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminum elements mounted on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote, with single-track axle monitoring - 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 - Under the gooseneck and on the rear crossmember left and right, each with a 7-pin socket with bracket for warning plates - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the platform bevel - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for remote steering operation, in addition to cable remote - Wabco Smart Board System - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank Hedok Aht Uepfx Anrjl - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle Hjdpfx Asu Hp Hrenrol - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Hodpfetphtmex Anrjl At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams Hodpfx Anohlz R Sersl - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: Hodpsrq Dlfofx Anrel S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 620 mm, šírka ložného priestoru: 2 540 mm, celková šírka: 2 540 mm, Rok výroby: 2026, Výbava: ABS, WEB TRAILER PRSH 27 FLATBED with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height approx. 1,280 mm at 1,150 mm fifth wheel height Spring center approx. 1,300 mm Kingpin load max. approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made of welded longitudinal beams and inserted cross members Outer frame height approx. 125 mm, 4 mm thick, with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, 5t each!! Landing gear: 24t telescopic landing gear, branded (Jost/SAF) Axles: Branded (SAF/BPW/JOST) 9t 22.5" large disc brake, total travel approx. 180 mm Without axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system, Knorr or Wabco Air connections, red and yellow coupling head Raise and lower system with 1 rotary slide valve, Knorr/Wabco Air tanks 2 x approx. 80 l Tire pressure monitoring Lighting: LED lighting Hsdpfx Anog Dkx Esrol 15-pin front connection Flashing side marker lights Tyres: Branded tyres 385/65 R 22.5 on steel rims Body: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof 28 mm hardwood floor alternating with galvanized Omega steel profiles Hardwood planks bolted to the cross members (optional double bolting) Floor: Certificate for tested forklift axle load of 9.0t according to DIN EN 283 Accessories: Premium rear lamp bracket, large and edged Rear underrun protection, welded version (rectangular tube) Access ladder, rear right, foldable and extendable with platform Two wheel chocks with holder, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Novagrau 7350 Other colors available at extra cost (subject to powder availability) KTL with zinc phosphating plus powder coating for highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show special equipment Consult us for a free and non-binding quote. Leasing, financing, or hire-purchase possible! We can accommodate your requirements! Contact us – we will gladly prepare an offer for you. Errors and interim sales excepted!!!

Stav: nový, maximálna hmotnosť nákladu: 91 640 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Celý náš vozový park s okamžitě a krátkodobě dostupnými vozidly najdete na našich webových stránkách. Výběr z výbavy. Kompletní výbava na vyžádání. Labutí krk * Hydraulicky zvedatelný/snižovatelný a snímatelný labutí krk. Délka cca 3 650 mm. Pro tahače: 6 x 4 nebo 8 x 4 Hjdpjuvbdtofx Anrel 3-nápravový kompaktní přední podvozek * Uložení háku vpředu a vzadu, délka cca 3 560 mm * Šířka podvozku: cca 2 850 mm Rypadlový most * Teleskopický rypadlový most BB-A s přejezdovými háky vpředu a s čepovým okem vzadu * Základní šířka: cca 2 850 mm, délka: cca 7 150 mm, výška nosníku: cca 430 mm, šířka nosníku: cca 1 350 mm * Ložná výška cca 580 mm při světlé výšce cca 150 mm 5-nápravový zadní podvozek * Mechanická čepová spojka pro připojení hlubokoložného návěsu vpředu, zadní závěs vzadu * Šířka podvozku: cca 2 850 mm * Délka podvozku: cca 6 840 mm * Kyvná náprava 3-nápravová Přední podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky předního podvozku: 12x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J kyvná náprava 5-nápravový zadní podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky zadního podvozku: 20x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J Lakování * HRM metalizace celého podvozku vozidla ZINACOR 850 (85 % zinek / 15 % hliník) pro zajištění nejlepší antikorozní ochrany * Závěrečný nátěr dvěma vrstvami dvousložkového laku, jednobarevně v RAL 3002 karmínově červené, dle systému RAL 841GL. Ráfky v odstínu stříbrná šedá Včetně příslušenství * Ocelová čelní stěna, výška cca 400 mm * Nasazovací ALU bočnice a zadní stěna na labutím krku, cca 400 mm vysoké, eloxované provedení * 3,5'' královský čep * BEKA-MAX centrální mazání pro labutí krk * Multispojovací hydraulické přípojky na labutím krku * BEKA-MAX centrální mazání pro 3-nápravový podvozek * Sedmipólová zásuvka vlevo a vpravo vzadu na předním podvozku pro výstražné tabule * Možnost zašroubování (ø cca 40 mm) každých cca 500 mm na horním pásu vnější trubky rypadlového mostu pro šroubovací oka (LC 16 000 daN) * Sklopná rozšíření s ocelovými deskami, nastavitelná na šířku cca 2 850 mm až cca 3 250 mm * Ocelové desky lze vkládat do dvou pozic pro vytvoření snížené ložné plochy. Nosnosti podle šířky viz zatěžovací diagram * Ocelové desky s gumovou povrchovou úpravou ± 12 mm * Sedmipólová zásuvka vlevo a vpravo, vpředu a vzadu na zadním podvozku pro výstražné tabule * BEKA-MAX centrální mazání pro 5-nápravový podvozek * Na zadním podvozku zásuvka pro kabelové dálkové ovládání natáčení náprav * Zadní podvozek s vanou * Dva nerezové nářaďové boxy, cca 855 x 340 x 390 mm, na labutím krku vlevo a vpravo * 1-válcový...

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2022, ďalšia kontrola (TÜV): 03/2027, Kögel 3-nápravový mega príves s bočnou posuvnou plachtou, posuvnou strechou, zdvíhacou strechou, paletovými dorazovými lištami, 8x hliníkové laty, plachta modrá, neutrálna. Veľmi dobrý použitý stav. Predaj výhradne podnikateľom s vylúčením akejkoľvek záruky. Chyby a medzipredaj vyhradené. Hsdpfsyhbbdex Anrel

Stav: použitý, farba: červená, Rok výroby: 2022, Faymonville Maxtrailer F-S43-1AAF. Hodpfjyxlc Uex Anrsl Rok výroby: 2022. Nápravy BPW 9 ton. Maximálna hmotnosť: 45 000 kg. Zaťaženie na čap: 18 000 kg. Predĺžiteľný o 6,5 metra. Rozšíriteľný 2 x 25 cm. Náhradné koleso. Vzduchové odpruženie. Pozinkovaný povrch. Príprava na twistlocky. 3. náprava je len riadená náprava. Medzistôl: 25 cm. Rozmery ložnej plochy: Dĺžka: 13 750 mm. Šírka: 2 550 mm. Výška: 1 150 mm. Výška čapu: 1 000 mm. Pneumatiky: 435/50R19,5 80%. Špičkový stav! ID č.: 501. Všeobecné obchodné podmienky spoločnosti Heinhuis sa vzťahujú na všetky inzeráty, ponuky a cenové ponuky spoločnosti Heinhuis, na všetky zmluvy uzavreté so spoločnosťou Heinhuis a na rokovania, ktoré im predchádzajú. Akýmkoľvek spôsobom reakcie akceptujete platnosť týchto Všeobecných obchodných podmienok a prehlasujete, že ste sa s nimi oboznámili. Naše ceny sú exportné netto ceny. = Ďalšie informácie = Rok výroby: 2022 Celková prípustná hmotnosť: 44 999 kg = Informácie o spoločnosti = Pre viac informácií: WhatsApp:

Stav: použitý, pohotovostná hmotnosť: 14 995 kg, maximálna hmotnosť nákladu: 50 805 kg, celková hmotnosť: 65 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2023, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Rok výroby: 2023, prevádzková hmotnosť: 14 995 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and function report. Gooseneck: - Gooseneck with rear chamfer: approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Hjdpfxev Hr Axs Anrol Loading platform: - Extendable loading platform with rear chamfer: approx. 500 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 4 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table, 250 mm - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring; over the axles with checker plate covering Axles and tyres: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tools - Tyres: 235/75 R17.5 Braking system: - Braking system compliant with EU regulations, EBS-E (4S3M) Accessories included: - 2" kingpin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanised connection rail - 4 wheel chocks with holders on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Remote steering front and rear, operated by cable remote control with push buttons, axle tracking control included - Mounting point at the rear of the gooseneck for ALU loading ramps - Galvanised width extensions, extendable by approx. 230 mm per side - European reflector signs (red-yellow) at the rear of the trailer - White reflective tape to EU regulations on the sides, extension, and rear in red - At the gooseneck and rear, left and right, each with a holder for warning boards, including socket - Galvanised folding supports under the rear chamfer of the loading platform - 1 holder for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease, removable pump guard - 1 mudflap at the rear of the trailer - Operator manual and description - On the gooseneck, ALU side and rear boards, insertable approx. 2,440 x 400 mm - Rear galvanised stanchions removable (superstructure length approx. 2,560 mm) - 4 pairs WADER container locks in the loading platform for 1x 20ft, 2x 20ft, 40ft, or 45ft container - 8 pairs of pockets for stanchions 100 x 50 mm in the outer frame of the loading platform - Sliding hook rails for ALU loading ramps at the rear of the trailer - Lift axle on the leading axle, controlled by TEBS E depending on current axle load and loading status - Four slide-out warning boards approx. 423 x 423 mm extendable by approx. 400 mm, each with a position light - Holder for beacon on warning boards - Wireless remote control for rear steering in addition to cable remote, with indicator lights on the receiver as axle tracking control - Anti-slip sand layer painted on checker plate over kingpin and loading platform - 80 km/h speed sticker at rear - Load gauge for axle load determination, incl. load chart

Stav: použitý, celková hmotnosť: 39 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2022, dĺžka ložného priestoru: 13 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, Rok výroby: 2022, Výbava: ABS, lfd 12389 LOWBED TRAILER MAX TRAILER 3-axle F-S43-1AAF / EXTENDABLE 4500 mm / STEERABLE AXLE Manufacturer: MAX TRAILERS First registration: 07/2022 Dimensions: 13,400 x 2,540 x 890 mm Perm. total weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Fifth wheel load: 18,000 kg Air suspension, lift/lower function Drum brakes ABS EBS Mileage: 142,000 km Axle manufacturer: BPW 10.5 t Lift axle Steering axle Trailing steer axle Lashing rings Superstructure paint: red Chassis paint: GALVANIZED/RED Tyres: 12 units Tyre tread depth: 7 – 10 mm Rear axle tyres 235/75 R17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber panels / precast concrete elements, etc. Hedpfx Asy Ag Adsnrel Ramp length 1200 mm / hardwood floor Rear loading edge 890 mm Lowered 840 mm Container locks for: 1 x 40/30ft and 20ft containers Incl. 4 x twistlocks Stanchion pockets and 5 t lashing rings on the loading area EXTENDABLE by 4,500 mm in 500 mm increments Central table can be removed TRAILING STEER AXLE ALUMINIUM AIR TANK / HOT-DIP GALVANIZED EXCELLENT CONDITION!!!! Currently, sample pictures from 06/2025 All information subject to change and prior sale! If you have any questions regarding this or other vehicles, please give us a call.

Stav: použitý, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2018, dĺžka ložného priestoru: 13 720 mm, šírka ložného priestoru: 2 540 mm, celková šírka: 2 540 mm, Výbava: ABS, Vehicle identification no.: YAFSR3001J0021353 TELESCOPIC EXTENSION up to 8,200 mm with sliding table CONTAINER POCKETS WADER suitable for 1 x 20", 2 x 20", 1 x 40", extendable for 45" container German MOT (HU) valid until 02/2027 – Safety Inspection (SP) until 08/2026 Hodoyw Dl Eopfx Anrsl SAF axles with drum brakes 3 hydro-mechanically forced-steered axles on turntable with cable control and radio remote control Automatic tracking Platform dimensions: 13,720 mm – Loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic unit Width marker lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel bracket WITH spare wheel Subject to change, prior sale, and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense of the term. Only the details in the purchase contract are legally binding. Our offer does not generally include a new roadworthiness inspection (TÜV). If a new TÜV certificate is required, we are happy to provide an offer through one of our partner workshops! Vehicle may be stickered and/or lettered with advertisements. Our general terms and conditions of delivery and payment apply.

Stav: použitý, celková hmotnosť: 50 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/2019, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, celková šírka: 2 540 mm, Výbava: ABS, Vehicle Identification No.: YAMT23XX1K0104335 TELESCOPIC EXTENSION up to 7,300 mm CONTAINER POCKETS – WADER type for 1 x 20", 2 x 20", 1 x 40", extendable to 45" container Hedpfxjywqdus Anrsl German Inspection (DE HU) until 02/2027 – Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically and mechanically steered axles with cable control + radio remote control Platform dimensions: 13,500 mm (of which 500 mm are chamfered) – Loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear inside turning radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket – electro-hydraulic unit Widening lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Subject to changes, prior sale and errors. This description is for general vehicle identification only and does not constitute a warranty in the legal sense of a sales contract. Only the description stated in the purchase contract is binding. Our offer is generally without a new TÜV (technical inspection). If a new TÜV inspection is required, we will be pleased to provide you with an offer from our partner workshops! Vehicle might be stickered and/or labelled with advertising. Our general terms and conditions of delivery and payment apply.

Stav: nový, maximálna hmotnosť nákladu: 36 245 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuální sklad vozidel, včetně vozidel ihned nebo krátkodobě dostupných, najdete na naší webové stránce. Výňatek z výbavy. Kompletní výbava na vyžádání. Ložná plocha: * Ložná plocha z tvrdého dřeva se zadním skosením cca 1 000 mm x 8° * 2 páry upínacích ok (LC 5 000 daN) * 1 pár upínacích ok (LC 10 000 daN) * 6 párů sklopných upínacích ok směrem ven (LC 5 000 daN) * 2 páry sklopných upínacích ok směrem ven (LC 10 000 daN) * Výřezy v vnějším rámu ložné plochy pro upevnění upínacích pásů (LC 2 000 daN) Opěrné nohy: * JOST opěrné nohy (mechanické) s dvourychlostní převodovkou, nosnost cca 24 t (zkoušená zatížitelnost cca 50 t) Nápravy: * BPW nápravy, vzduchové odpružení, kotoučové brzdy (cca 377 mm), funkce zdvihu/snížení (ET 120) * Nářadí pro nápravy Obutí: * Pneumatiky 435/50 R 19.5 – značka dle našeho výběru * TPMS systém kontroly tlaku v pneumatikách dle ECE R 141. Přenos dat do tahače probíhá přes normované EBS rozhraní dle ISO 11992. Pro správné zobrazení musí být tahač schopen tato data přijímat a zobrazovat. Brzdový systém: * Brzdový systém Wabco dle předpisů EU s EBS-E (2S2M) bez spojovacích vedení na tahač Ocelová konstrukce: * Ocelová konstrukce z vysocepevnostních jemnozrnných ocelí. Jakosti: S355J2+N/S355MC (mez kluzu 355 MPa), S690QL/S700MC (mez kluzu 690 MPa) Elektroinstalace: * Elektroinstalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) * Všechna LED boční poziční světla blikají se směrovkou * ASPÖCK-UNIBOX na přední připojovací liště se zásuvkami 24N, 24S a 15pólovou zásuvkou dle ISO: 24N ISO-1185, 24S ISO-3731, 15 pólů ISO-12098 Lakování: * Kompletní ocelová konstrukce po svaření automaticky tryskána v zařízení s metacími koly, druhé tryskání korundem pro optimální přilnavost lakového systému * Metalizace celého podvozku vozidla ZINACOR 850 (85 % zinek/15 % hliník) – pro zajištění nejlepší ochrany proti korozi * Vrchní lak dvouvrstvý dvousložkový nátěr, jednobarevně dle RAL 3002 karmínová červeň podle systému RAL 841GL * Zadní část vozidla metalizována a lakována v RAL 9010 (čistě bílá) * Systém lakování testován ve slanovodním sprejovém testu dle ISO 9227-NSS * Dutiny zataveny speciálním voskem Včetně následujícího příslušenství: * Žluto-červené vzduchové spojky na pozinkované přípojnici vpředu Hsdpsyvnfaofx Anrsl * 4 klíny s držáky * 2 palcový královský čep * Ložná plocha s vyztuženou tvrdodřevěnou podlahou * 1 držák rezervního kola pod ložnou plochou vpravo ve směru jízdy * Pozinkované sklápěcí opěrné nohy pod skosením ložné plochy * 9 párů kapes pro sloupky cca 100 x 50 mm ve vnějším rámu ložné plochy * 1 pozinkovaná ocelová přední stěna (EN12642-XL) vysoká cca 1 600 mm * Na centrálním nosníku lakovaná písková vrstva proti skluzu * 1 INOX (nerezová) příčná skříňka pod ložnou plochou, cca 1 000 x 400 x 2 500 mm * 6 párů zásuvek WADER na kontejnery v ložné ploše pro 1x 20' kontejner, 2x 20' kontejnery nebo 1x 40' kontejner * 3 páry příčných kapes pro sloupky cca 100 x 50 mm na ložné ploše * Úložný prostor pro max. 9 párů sloupků cca 100 x 50 mm šroubovaný uvnitř na přední stěně * 2 INOX skříňky pod ložnou plochou vlevo a vpravo, cca 600 x 350 x 600 mm * Držák pro hliníkové nájezdové rampy, příčně pod ložnou plochou za nápravami * 1 maják dodaný volně * 2 páry přepravních

Stav: nový, pohotovostná hmotnosť: 9 450 kg, maximálna hmotnosť nákladu: 35 550 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 1 560 mm, celková šírka: 2 550 mm, veľkosť pneumatiky: 385/65 R 22,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck designed as load platform with aluminium chequer plate covering - Front edge bevelled at approximately 45° - Hydraulic lifting rocker, approx. -280/+250 mm lift and lower range - Two king pin positions at centres 2,300 mm and 2,000 mm - Suitable for tractor units: 4x2, 6x2 or 6x4 Loading bay: - Loading bay, approx. 9,500 mm length, equipped with bottom-mounted angle profiles for pallet loading (distance king pin to centre of axle assembly approx. 8,000 mm) Axles, suspension and tyres: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle balancing with lifting and lowering function - Lowering safety devices on the axles in case of air spring rupture, designed for maximum pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors fitted in all wheels including spares - TPMS system compliant with ECE R 141 Surface treatment: - Complete steel construction wheelabrated after welding - Second abrasive blasting with corundum for optimum coating adhesion - Full chassis HRM metallised with ZINACOR 850 (85% zinc/15% aluminium) to ensure premium corrosion protection - Final paint finish with two coats of two-component topcoat, solid colour in Nova Grey (DB 7350) - Paint structure tested by salt spray test in accordance with ISO 9227-NSS, cavity sealing with special wax Standard accessories included: - Plug-in steel headboard, approx. 400 mm high - Toolbox with lid, countersunk at rear of gooseneck, approx. 640 x 700 x 215 mm - Removable ALU rear panel on gooseneck, approx. 400 mm high, anodised - One pair of foldable ALU sideboards on gooseneck, approx. 400 mm high, anodised - 2" king pin - 3 pairs of recessed lashing rings on gooseneck (LC 6,300 daN) - Front connection panel fitted with yellow-red air couplings, illumination for operating gooseneck, suspension and hydraulic tensioning with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted at front right with 2 removable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on main beams (LC 6,300 daN) - Main beams with flush-fit grating deck between load securing guide rails - Hydraulic pre-installation including control unit for mounting 3 pairs of our hydraulic load securing devices - First and last axles liftable manually left and right - Storage box behind axle assembly, left and right, splashproof - Rear bevel for easier pallet insertion - Rear crossmember fitted with eyes for mechanical load restraining Hsdpfx Ansygvc Hsrsl - 7-pin socket at rear crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges fitted on left, including axle load diagram - 3 pairs of hydraulic load securing arms, pivoting and adjustable on main beams - Rear door with diagonal bracing, hinged left, hydraulically locked right, can be locked horizontally at 90°, 105° and 270° - Folding underrun protection for transport of max. 4 empty standard pallets - 1 spare wheel - Number plate bracket with illumination, rear left on trailer - Round NATO socket at front connection panel (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX make, standard grease version

Stav: nový, maximálna hmotnosť nákladu: 38 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment. Full specification available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading deck fitted with approx. 30 mm thick wooden floorboards * 7 pairs of flip-out lashing rings (LC 5,000 daN) * 3 pairs of flip-out lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for hooking lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical), two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 tyres, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via standardized EBS interface as per ISO 11992. The tractor unit must be capable of transmitting and displaying this data for correct display Axle: * BPW axles and suspension * All axles forced hydraulic steering * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * High-tensile fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system as per EU regulations * 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel structure automatically blast-cleaned after welding using a turbine blast machine * Second blasting with corundum for optimal coating adhesion * Top coat: 2 layers of 2K paint, single color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver gray * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Paint build-up tested in salt spray test to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder on the front bulkhead * 2-inch king pin * Galvanized connection rail at the front with yellow-red air couplings * Mounts for warning boards left and right on neck and rear, including socket Hjdpfsw Tpr Isx Anrel * 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the loading platform * One galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the platform for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; with additional locking position for a 45' container in the extension * 4 crosswise stake pocket strips in the platform for approx. 100 x 50 mm plug-in stanchions * Storage for up to 9 pairs of plug-in stanchions, bolted inside the front bulkhead * Climbing ladders mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted left-front under the loading platform * Additional INOX toolbox, approx. 1,200 x 46...

Stav: použitý, maximálna hmotnosť nákladu: 37 535 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2024, ďalšia kontrola (TÜV): 08/2026, celková šírka: 2 540 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a krátkodobo dostupných vozidiel, nájdete na našej webovej stránke. Výber zo základnej výbavy. Kompletnú výbavu poskytneme na požiadanie. Ložná plocha: * Výsuvná ložná plocha s pneumaticky ovládaným zámkom * 7 párov výklopných upevňovacích ok pre vonkajšie použitie (LC 5 000 daN) * 3 páry výklopných upevňovacích ok pre vonkajšie použitie (LC 10 000 daN) * Výrezy vo vonkajšom ráme ložnej plochy na prichytenie upínacích pásov (LC 2 000 daN) Podpery: * JOST podpery (mechanické) s dvojrýchlostnou prevodovkou pre cca 24 t zdvíhacie zaťaženie (cca 50 t skúšobné zaťaženie) Nápravy: * BPW nápravy, vzduchom odpružené, s kotúčovými brzdami (cca 430 mm), s funkciou zdvíhania/spúšťania. Technická nosnosť nápravy: 10 000 kg/nápravu (ET0) * Riadená vlečená náprava s elektromagnetickým zámkom pre cúvanie, ovládateľným zaradením spiatočky alebo manuálne * Náradie pre nápravy Obutie: * Pneumatiky 385/65 R 22.5 Hsdoxgk U Nspfx Anrjl Brzdová sústava: * Brzdová sústava podľa predpisov EÚ s EBS-E (2S2M), bez prepojovacích vedení k ťažnému vozidlu Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lak: * Prvotriedna a dlhotrvajúca ochrana proti korózii vďaka štandardnému tryskaniu zváraného rámu a základnému nástreku dvojzložkovým (2K) zinkovým základom * Vysokokvalitný dvojzložkový vrchný lak v jednofarebnom vyhotovení podľa RAL 3002 karmínová červená * Disky v striebornej farbe * Zadná časť metalizovaná a lakovaná v RAL 9010 (čisto biela) Vrátane nasledovného príslušenstva: * Na pozinkovanej prednej spojovacej lište žlto-červené vzduchové spojky * 4 ks klinov s držiakom * 2-palcový kráľovský čap * Žltý reflexný pás podľa EU predpisov po stranách, na výsuvu a zadnej strane návesu * Európske reflexné tabule (červená-žltá) na zadnej časti návesu * Ložná plocha s cca 30 mm hrubou drevenou podlahou v omega profiloch * 10 párov vreciek na stĺpiky pre zasúvacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme ložnej plochy * Úložisko pre max. 9 párov zasúvacích stĺpikov cca 100 x 50 mm na vnútornej strane čelnej steny * 1 držiak rezervného kolesa pod ložnou plochou vľavo v smere jazdy, bez rezervy * Jedna blatníková lišta na zadnej strane návesu * Návod na obsluhu a popis na USB kľúči * Držiak pre výstražné majáky na zadnej strane návesu * Na labutom krku a zadnej časti vľavo i vpravo držiak na výstražné tabule vrátane zásuvky * Samolepky rýchlosti 80 km/h vzadu a po stranách * Manometer záťaže na určenie zaťaženia náprav vrátane zaťažovacieho diagramu * Pozinkovaná oceľová predná stena (EN12642-XL), cca 1 600 mm vysoká * 6 párov WADER kontajnerových vreciek v ložnej ploche pre 1x 20' kontajner, 2x 20' kontajnery alebo 1x 40' kontajner zadne zarovno * INOX náradový box cca 600 x 350 x 600 mm pod ložnou plochou vľavo v smere jazdy * 4 páry líšt na stĺpiky namontované pozdĺžne na ložnej ploche pre zasúvacie stĺpiky 80 x 50 mm * Zdvihacia predná náprava riadená cez TEBS E v závislosti od aktuálneho zaťaženia a stavu naloženia * 2 LED cúvacie svetlá namontované na zadnej časti * HRM metalizácia (High Resistance Metallisation)

Stav: nový, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Extract from the equipment. Complete equipment details on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10°, and integrated mounting rail for loose ALU loading ramps * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines safely routed within the extendable beams and automatically adapting to the current platform length * Technical fifth-wheel load: 18,000 kg * For tractor units: 4 x 2 and 6 x 2 * TPMS tyre pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for control of hydraulic functions. Without supply connections installation on tractor unit * 4 pairs of recessed lashing rings in the gooseneck outer frame: - Front three pairs flat (LC 10,000 daN) - Rear pair foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets recessed in the gooseneck outer frame, for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B - static test load approx. 50,000 kg * Approx. 32 mm wooden floor encased in ALU Omega profiles on gooseneck and loading area * 10 pairs of recessed flat lashing rings in the loading area outer frame, foldable outwards * 1 pair of lashing rings each before the last axle and at the trailer rear crossmember (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the loading area frame, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier beneath loading platform, right side driving direction * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted on the left under the loading area (driving direction) * Bevel on the vehicle's rear crossmember, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle's rear crossmember * 1 pair of drop-in tube supports at the rear crossmember * Remote steering from front and rear via cable remote control, axle tracking control, no installation in tractor unit * Round NATO socket at the front connector bracket (Maeler & Kaege VG 96 917) * 1 LED work light each left and right on the front wall, wired to the tractor unit connector bracket * One locking point in extension, every approx. 500 mm Hjdpfxsy Augde Anrjl * Holder for plug-in stakes inside the gooseneck front wall when not in use * 4 wheel chocks with holder beneath the loading area * (Galvanized) extensions extendable approx. 230 mm per side (without timber planks) * 1 LED work light each left and right in front of axles, wired to connector bracket for tractor unit * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with start-assist * Under gooseneck and at rear crossmember left and right: one holder each for warning panels * Acoustic warning signal for reversing * EU reflector at rear of vehicle