Náves s výmennou nadstavbou

KÖGEL S24-2 BDF-Auflieger verlängerbar Liftachse *NEU*

Stav: nový, celková hmotnosť: 41 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 360 mm, celková šírka: 2 550 mm, celková výška: 1 800 mm, Rok výroby: 2021, Výbava: ABS, Wechsel chassis semi-trailer for 40', 2x 20', 1x 30', 1x 40'HC containers * Lift axle * Rear extension pneumatically extendable by 1,360 mm * SAF axles with disc brakes * Jost landing gears * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Wheel chocks Pjdskbvviopfx Afmeha --- Vehicle ID number 6915 --- Subject to errors and prior sale

Stav: nový, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, 3-axle MULTIMAX *PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin steering angle towards rear approx.: 2,100 mm Coupling height when loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: * Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm *Gross vehicle weight depends on fifth-wheel load: Yes Special permit required if national regulations are exceeded. Technical Description Gooseneck: SNT-design gooseneck to optimize platform length, length approx. 3,900 mm, rear with bevel approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for tractor units: 4 x 2 and 6 x 2. Loading Platform: Length approx. 9,600 mm with rear bevel of approx. 900 mm x 6°. Section after gooseneck hydraulically lift- and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Ramps with hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward. Maximum load and drive-on angle as per technical datasheet: C470319. Maximum ramp angle with lowered platform: 9°. Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with raising and lowering valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF dual tires. Brand at our discretion. Load index 143/141J (144/144F). Braking System: WABCO EBS-E brake system according to EU standards. Without connection cable to the tractor unit. Lighting System: 24-volt "ASPÖCK-NORDIK full LED" lighting, compliant with EU standards. (ASS 3) Metallization: Complete HRM (High Resistance Metallization) of the entire structure. Full-steel construction shot-blasted, then hot finished with ZINACOR 850 (Zinc 85% – Alu 15%). 6-coat finishing: Full-steel construction, shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Final coating with 2 coats of 2-component (acrylic) paint in a single RAL color of your choice. Afterwards, sealing of cavities with special wax. Rims in silver. Multi-color and special paintwork available at additional cost. Steel Structure: High-strength, fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa). Welders certified according to DIN-EN 287-1. MAG welding process as per EN ISO 4063. Protective gas M21 according to EN ISO 14175. Pedpfjizu Ntox Afmjha Front wall made of steel, removable, approx. 400 mm high. Connection bar for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. 24N plug as per ISO-1185 24S plug as per ISO-3731 15-pin plug as per ISO-12098 If your pin configuration differs from ISO standard, please inform us. "Anderson" socket at the front connection bar. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or the electric winch (35 mm²,...

Stav: nový, konfigurácia náprav: 3 nápravy, Výbava: ABS, Kässbohrer Tank Container Chassis SHF-T 20'' Delivery time: Available at short notice from stock! Unladen weight approx. 3,280 kg Colour: NOVA GREY Phedpfx Afjimvpasmoa Chassis & Axles # BPW axles with disc brakes 22.5 inch # Wabco braking system EBS 4S/2M with RSS # Wabco air suspension system # 6 x premium tyres 385/65 R 22.5 on "Alux" aluminium rims # 1st axle as lift axle # 4 x JOST container locks Further details & accessories # Aspöck 24V lighting # 2 hose tubes integrated into chassis # ADR / hazardous goods panel, foldable, rear left # Fire extinguisher box WITHOUT extinguisher ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° Phjdpsiu Er Aefx Afmja - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 2 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2025, Výbava: ABS, Brand new Wiese Wingliner semi-trailer in OpenTop configuration * SAF axles with air suspension and disc brakes * Tyres: 6x 385/65 R22.5" * Wabco brake system * LED lighting * Titgemeyer outer frame, with 12 pairs of lashing rings recessed into the outer frame * 1x spare wheel holder * 2x stainless steel toolboxes, approx. 1,000x500x500 mm * Wingliner OpenTop body * Left side wall and the roof can both be fully opened for loading * Driven by electro-hydraulic unit * Radio remote control * etc... This vehicle is also available for rent!!! Podpfx Aouqgugefmeha For further information, please do not hesitate to contact us.

Stav: nový, maximálna hmotnosť nákladu: 36 461 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 480 mm, celková výška: 860 mm, Rok výroby: 2025, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN). 1 pair of fold-out lashing rings on the inside at the front center beam (LC 10,000 daN). Grating surface C40/4 (point load 2.3 tons on an area of 20 x 20 cm), tread plate covering above the axles. Two-Part Steel Ramps: One pair of galvanized two-piece steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 tons on an area of 20 x 20 cm). Ramp with hydraulically folding ramp sections, hydraulic lifting device. Maximum load per pair: 40,000 kg. According to Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm in transport position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load). Tyres: 235/75 R17.5 3PMSF tyres as per manufacturer's choice. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle is via the standard EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting. Phedsw Dl Hwepfx Afmja All LED side marker lamps flash with the indicator. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Curtainsider Body (Tarp Body): Curtainsider body approx. 3,960 mm - Galvanized front wall with tensioning mechanism for sliding curtains. - Roof by "EDSCHA" brand, forward-sliding on aluminium roof rail profiles (bolted to front and rear walls). - 3 pairs of movable stanchions in the loading area. - Rear hydraulically extendable left and right by approx. 750 mm. - Sliding roof with foldable portal support. - Sliding curtain with 700 mm reserve length, lashing straps at approx. 600 mm intervals. - Height of upper edge (loaded): approx. 3,960 mm. - Driving with open sliding roof is not permitted and will damage the tarp. Paintwork: Entire steel structure is automatically shot-blasted using a turbine after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection. Final coating with 2 coats of 2K finish paint, single color in a shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Stav: použitý, číslo stroja/vozidla: 147, najazdené kilometre: 150 000 km, výkon: 368 kW (500,34 k), prvá registrácia: 09/2022, typ paliva: nafta, celková hmotnosť: 17 997 kg, veľkosť pneumatiky: 315/70r22,5, konfigurácia náprav: 4x2, rázvor náprav: 3 600 mm, ďalšia kontrola (TÜV): 09/2025, brzdy: intarder, farba: biely, kabína vodiča: spacia kabína, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ-vzduch, Výbava: ABS, hydraulika, klimatizácia, navigačný systém, nezávislé kúrenie, nízka hlučnosť, palubný počítač, spojler, tempomat, uzávierka diferenciálu, Equipment / Specification Vehicle Specification * Engine: 500 HP * Emissions standard: Euro 6e * Transmission: 12-speed ZF Traxon automatic gearbox + intarder + single PTO Axles and Wheels Wheelbase: 3,600 mm Front Axle * Tire size: 315/70R22.5 * Tires: Continental * Brakes: Disc brakes * Suspension: Parabolic leaf spring * Load capacity: 7,100 kg Psdelbmxdepfx Afmsha Rear Axle * Tire size: 315/70R22.5 * Tires: Continental * Brakes: Disc brakes * Suspension: Air suspension with 2 air bellows * Load capacity: 11,500 kg Special Equipment Luxury Pack Exterior * Electric cab tilt system * LED low-beam headlights * Side skirts * Aluminium wheels * 1 fuel tank, 600 l * Coupling height: 1,100 mm * Fog lights * Sun visor on cab * Roof spoiler * Side spoilers * Rain sensor * Automatic headlight control Interior * 8" cluster display * Multimedia system with 7.2" touchscreen * Truck-specific navigation system * Refrigerator * Electric cab tilt system * Auxiliary heater * Double armrest on passenger seat * Second bed + storage compartments Technical Features * Cruise control * Adaptive cruise control (without ZF intarder) * LDWS (Lane Departure Warning System) * AEBS (Advanced Emergency Braking System) * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ASR (Anti-Slip Regulation) * ECO-Roll * Differential lock * Adaptive speed regulation * Max Cruise (predictive cruise control) * TPMS (Tire Pressure and Temperature Monitoring System) 3-year full vehicle warranty (3+0) Heated windscreen 2-circuit hydraulic system (incl. 200 l tank unit, hydraulic pump (110 l/min), pipe pendulum unit) Rental vehicle with signs of use, subject to prior rental and errors excepted.

Stav: použitý, najazdené kilometre: 5 000 km, výkon: 382 kW (519,37 k), prvá registrácia: 04/2025, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, ďalšia kontrola (TÜV): 04/2026, brzdy: retardér, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, Rok výroby: 2025, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, navigačný systém, nezávislé kúrenie, sadzový filter, Vybavenie: Navigačný systém Phjdpei Nyvmsfx Afmsa * Nezávislé kúrenie Regulácia rýchlosti: Adaptívny tempomat Klimatizácia: Automatická klimatizácia * Parkovacia klimatizácia Hydraulický systém: Žiadny Bezpečnosť: ABS * EBS * ESP * Retarder/Intarder Doplnky: Možnosť prenájmu

Stav: nový, konfigurácia náprav: 3 nápravy, Výbava: ABS, Vážený záujemca, predstavujeme Vám našu mobilnú wellness jednotku. V ponuke je zahrnutá nadstavba, na požiadanie Vám radi pomôžeme aj s kúpou prívesu. Kabína obsahuje zabudovanú saunu a vstavanú vaňu. Kabína je pohodlná aj v zatvorenom stave a vďaka dvom otvárateľným bočniciam ju možno bez problémov premeniť na otvorenú vonkajšiu jednotku. Vaňa: | drevom vykurovaná alebo elektrická verzia | 1000 litrov vody | 6 osôb | doba napúšťania cca 30 minút Sauna: | Harvia Vega BC80 E – 8 kW elektrická pec | Harvia M3 saunová pec na drevo Podpfsu H Eanex Afmeha Kabína ďalej obsahuje: | zabudovaná sprchová hlavica a 600-litrová vodná nádrž | televízor | HPC hydraulický piest – ovládateľný aj cez mobil | kotol | menič napätia | 2 akumulátory | Thule markíza Viac informácií na

Stav: nový, maximálna hmotnosť nákladu: 37 581 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 15 850 mm, celková šírka: 2 550 mm, Rok výroby: 2025, Výbava: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension locking position: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm Phsdpfxjmtwype Afmea - Wheelbase: 7,700 mm - Axle load: 10 tonnes - Overall width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x rigid front axles, 1x trailing steering axle at rear - Air suspension including load gauge - Wabco braking system - Tyres: 12 x 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear support winch with 50 tonne capacity - Mechanically folding rear supports with 45 tonne capacity - Wheel recesses: 420 mm deep, 800 mm wide, - suitable for tyre diameter up to max. 1,800 mm RAMP: - Rear end ramp mountings LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft., 1x40 ft. or 1x45 ft. containers + 4 twist locks - Front wall made of steel material, 1,500 mm high, with Code-XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box with space for 18 stakes - 1x amber rotating beacon - Wheel recess bridge to cover wheel recesses Chassis colour: RAL 3020 Traffic Red For further information, please feel free to contact us.