Sklápací náves

SCHMITZ CARGOBULL SKI24 7.2 SL Alu 27,2 cbm Mietkauf 610 EUR

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 636 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 300 mm, objem nakladacieho priestoru: 60 m³, Chassis manufactured using self-supporting ALU (aluminium) construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregate chassis made of ALUMINIUM with a frame height of 140 mm! (max. 39 tonnes). Axles and Suspension "Disc brakes 22.5": 3 x 9 tonne Jost axle units with DC air suspension, raising and lowering, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Tyres and Wheels: 6 wheels with tyres size 385/65 R 22.5, manufacturer’s choice. Alcoa aluminium rims DuraBright 11.75x22.5 ET 120. King pin bolted into a 10 mm thick plate. Landing Legs: aluminium drop legs, 2 x 10 t load capacity, for air suspension we use swivel feet. Brake System: according to E.G. standard, two-line brake system, Wabco EBS electronic braking system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoir system, premium modulator. Dkjdpfx Aofakkcedkor Electrical System: according to the German Road Traffic Licensing Regulations (StVZO) with 2 LED five-chamber lights (Aspöck Europoint LED) integrated into the aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin socket, with side LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights from the 1st support leg height, 1 internal LED work light at the front left, operated from outside. Body/Tipping Body "Fully welded interior construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn Aluminium tipper body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), fully welded, 600 mm wide, with lower and upper flange, plank profiles fully welded on the inside, floor designed as a moving floor system fitted on 140 mm ALU cross members, floor load approx. 7 t/m², tightly spaced cross members (approx. 350 mm), ALU headboard with 600 mm plank profile 2-3 mm thick, straight design, special slanted ALU corner profiles, smooth straight rear wall with 2 ALU swing doors 50/30 mm thick, 4 vertical locking rods in welded ALU rear frame fitted with Teflon and stainless steel bearings, movable ALU wall hanging on the reinforced ALU upper flange with Kevlar cover for complete emptying, side brush sealing and additional side Kevlar cover, integrated discharge funnel with folding cover plate at rear left, externally operated, viewing window rear left, one sample slide per rear door (total 2), service door front left. Hydraulic system: "Cargo Floor" moving floor system integrated in the floor with hydraulically operated ALU profiles on ALU square tubes with around 670 PE-HD slide shoes, floor thickness approx. 6 mm, hydraulic stroke approx. 200 mm, fixed connections at the headboard, separate possibility for connecting hydraulic lines under the vehicle with fixed connections, pipe size NW 21, fixed connections with size and design yet to be specified, operating pressure 190–240 bar max., aluminium end pieces welded into floor, electric operation rear left with cable remote control in a lockable waterproof box. Accessories: PVC mudguards with rubber mud flaps, aluminium spare wheel holder, side ALU underrun protection, folding type, 1 tool box approx. 800x460x430 mm, plastic, approx.

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33902037031, pohotovostná hmotnosť: 4 795 kg, maximálna hmotnosť nákladu: 30 320 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 7 200 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 450 mm, objem nakladacieho priestoru: 25 m³, celková dĺžka: 8 600 mm, celková šírka: 2 550 mm, celková výška: 3 040 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5", stav pneumatík: 100 percento, farba: sivý, These images are archive photos! The vehicle may still be in use! Fine-grain steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin, Patented curved front end 24 t two-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with load compensation Wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard brackets, stone-repellent surface With anti-spray mudflaps only on the last axle Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned — reduces tyre wear and fuel consumption Axles in off-road version Air suspension 1st axle is an automatic lift axle, including forced lowering and starting aid, operated by "braking 3 times" (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism Braking System Two-line compressed air braking system Coloured line routing for easy service Spring-accumulator parking brake Two confusion-proof coupling heads at the front, without connection line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure proper ABS operation! With lift & lower valve Vehicle stability control system Automatic tilt lowering with shut-off valve "TPMS" Tire Pressure Monitoring System — display via instrument in towing vehicle, via EBS, without truck installation (must be supported in the truck; functionality only applies to standard tyres) Wheels and Tyres 385/65 R22.5" Steel rims Electrical System 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate illumination in LED (Note: With certain towing vehicles, error messages may occur, even if functionality is ensured) Side-mounted yellow LED lights coupled to the indicators "flashing side marker lights" 2 white position lights at the front in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin confusion-proof sockets at the front, without connection cable Additional integrated LED work light at the rear, operated via the reverse light Hydraulics Low-pressure cylinder max. 170 bar, Operated hydraulically via truck PTO Body (Tipper) Aluminum box body of high-grade, wear-resistant material Dodpfxey Rrplo Adkokr Inclined front wall, 5 mm thick, with external cylinder mount Side walls made of 30 mm hollow chamber profiles, precisely welded, with bulkhead-resistant top rail profile. Interior features climbing steps on the front wall (not in combination with Cramaro systems). Shovel and broom holder outside on front wall. Greenline — conical and aerodynamic body design "Membrane" rear wall Rear wall as pendulum tailgate with double hinge, external mounting with double hook locking Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access steps, connection plate for air/electric and brake, with ample space for best possible handling Roll tarp, stored to right side, with central locking on left side Operational notes For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and material damage.