Rampa pre teleskopický nízkozdvižný náves

NOOTEBOOM MCO-73-04V Tele-Tieflader Rampen 4-Achs

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high Gedpfok Af Svox Ag Tobh - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf Gbodergzv Nspfx Ag Tjh

Stav: nový, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, 3-axle MULTIMAX *PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin steering angle towards rear approx.: 2,100 mm Coupling height when loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: * Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm *Gross vehicle weight depends on fifth-wheel load: Yes Special permit required if national regulations are exceeded. Technical Description Gooseneck: SNT-design gooseneck to optimize platform length, length approx. 3,900 mm, rear with bevel approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for tractor units: 4 x 2 and 6 x 2. Loading Platform: Length approx. 9,600 mm with rear bevel of approx. 900 mm x 6°. Section after gooseneck hydraulically lift- and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Ramps with hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward. Maximum load and drive-on angle as per technical datasheet: C470319. Maximum ramp angle with lowered platform: 9°. Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with raising and lowering valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF dual tires. Brand at our discretion. Load index 143/141J (144/144F). Braking System: WABCO EBS-E brake system according to EU standards. Without connection cable to the tractor unit. Lighting System: 24-volt "ASPÖCK-NORDIK full LED" lighting, compliant with EU standards. (ASS 3) Metallization: Complete HRM (High Resistance Metallization) of the entire structure. Full-steel construction shot-blasted, then hot finished with ZINACOR 850 (Zinc 85% – Alu 15%). 6-coat finishing: Full-steel construction, shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Final coating with 2 coats of 2-component (acrylic) paint in a single RAL color of your choice. Afterwards, sealing of cavities with special wax. Rims in silver. Multi-color and special paintwork available at additional cost. Steel Structure: High-strength, fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa). Welders certified according to DIN-EN 287-1. MAG welding process as per EN ISO 4063. Protective gas M21 according to EN ISO 14175. Front wall made of steel, removable, approx. 400 mm high. Connection bar for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. Gsdpfxeizu Nte Ag Tjbh 24N plug as per ISO-1185 24S plug as per ISO-3731 15-pin plug as per ISO-12098 If your pin configuration differs from ISO standard, please inform us. "Anderson" socket at the front connection bar. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or the electric winch (35 mm²,...

Stav: nový, maximálna hmotnosť nákladu: 65 400 kg, celková hmotnosť: 93 400 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, Pos. 1. Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data are only valid when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights / Speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Permissible total weight: 94,000 kg Unladen weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on the load chart / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Total combination length: 24,165 mm Vehicle width: Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Steering radius front / rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front running gear Wheelbase: 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered 14,400 mm flatbed (external beams) single-telescopic with interface Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Construction height: 300 mm Plus 4,000 mm extension beam incl. Loading height (loaded): approx. 450 mm Gsdpfxowg N N Ij Ag Tobh 4-axle rear running gear Wheelbase: 3 x 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced-steered

Stav: použitý, Funkcionalita: obmedzená funkčnosť, výkon: 43,39 kW (58,99 k), typ paliva: nafta, Rok výroby: 2004, Teleskopický výložník vrátane lopatového balíka Kabína poškodená, viď foto!! Inak plne funkčné Gbsdpex A S Enefx Ag Tjh

Stav: použitý, pohotovostná hmotnosť: 28 700 kg, celková hmotnosť: 98 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2009, ďalšia kontrola (TÜV): 05/2026, veľkosť pneumatiky: 285/70 R19,5, farba: žltá, Výbava: ABS, Bubnová brzda EBS Užitočné zaťaženie 69 300 kg Mercedes-Benz Arocs 2663 LS ťažký ťahač Farba: žltá 591 100 km STK platná do: 09/2026 Nafta Nádrž na AdBlue Prvá registrácia: 09/2017 Objem motora: 15 569 ccm Výkon: 460 kW ABS Palubný počítač Uzávierka diferenciálu Hydraulika (prídavný pohon) Kipp hydraulika Asistent jazdného pruhu EBS ESP Nízka hlučnosť Navigačný systém Nezávislé kúrenie Nezávislá klimatizácia Tempomat Kontrola trakcie Prídavné reflektory Euro 6 C 3 nápravy Rázvor: 3 400 mm Veľkosť pneumatík: 385/65 R22,5 - 315/80 R22,5 Celková prípustná hmotnosť: 26 000 kg Gjdsx Nqibjpfx Ag Tebh Užitočné zaťaženie: 15 425 kg Pohotovostná hmotnosť: 10 575 kg Retarder Plnoautomatická prevodovka Listovo-vzduchové pruženie Turbo-retardérová spojka Technicky prípustná celková hmotnosť súpravy: 70 000 kg pri 12 % / 100 000 kg pri 8 % Prídavný pohon na strane motora Slnečná clona Výstražné majáky Vzduchové trúby Vzduchom odpružená kabína 1 lôžko VIN-číslo: 10167342 Technické údaje bez záruky na ich presnosť.

Stav: nový, číslo stroja/vozidla: 14090, Rok výroby: 2024, prevádzkové hodiny: 1 153 h, nosnosť: 5 000 kg, zdvíhacia výška: 5 500 mm, voľný zdvih: 1 900 mm, stavebná výška: 2 900 mm, dĺžka vidlíc: 1 200 mm, veľkosť prednej pneumatiky: 445/70 R22.5, veľkosť zadnej pneumatiky: 340/80 R18, celková hmotnosť: 8 436 kg, typ motora: Diesel, výrobca: Manitou Gbedpfxjw Ayv Rj Ag Tjh

Stav: použitý, číslo stroja/vozidla: YV2AP90D2BA70xxxx, najazdené kilometre: 300 000 km, Rok výroby: 2011, Uveďte referenčné číslo pri dopyte: 22386 Špecifikácie: Najazdené kilometre: 300 000 km Prevodovka: automatická Retarder Euro 5 – 700 k Plnooceľové pruženie 6x4 Gedpfx Aoyhyq Ueg Tjbh 3,5" sedlový čap Vyklápacia polo-hydraulika Dobré pneumatiky Svetelná rampa Spacia kabína Rádio/CD Klimatizácia Údržba vykonávaná vo vlastnej réžii Ihneď k dodaniu Popis: Volvo FH16 700 6x4 ťažné vozidlo z roku 2011. Verzia pre ťažké nasadenie s 3,5" sedlovým čapom. Ihneď k dodaniu. Km: 300000 PS: 700 TÜV: nie EU schválené do: 20.09.2025 Vlastná hmotnosť: 10520 Celková hmotnosť: 35000 Užitočné zaťaženie: 24405 Šírka: 255 Dĺžka: 695 Euro: 5 Model: FH16 700 6x4 tungtrekker – Dodávané schválené – 300 000 km Prevodovka: automat = Ďalšie informácie = Pre viac informácií kontaktujte ATS Norway.

Stav: použitý, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2012, ďalšia kontrola (TÜV): 03/2026, dĺžka ložného priestoru: 12 000 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 600 mm, Rok výroby: 2012, Výbava: ABS, * 3rd & 4th axle rear-steered * Two-part hydraulic loading ramps * Hydraulic additional rear stabilizers * Wabco Trailer EBS-E * SAF twin tyres axles with disc brakes * 2 x storage boxes * Work lights * Spare wheel * Gooseneck (3.3m × 2.55m) * Low bed (8.7m × 2.55m) * Tyre size: 235/75R17.5 * Technical gross weight: 61,000 kg (with special permit) * Unladen weight: 11,300 kg * Overall length: 12,450 mm * Safety inspection due: 09/2026 * Vehicle number: 11748 --- Errors and prior sale excepted. Advertising and various labels have been digitally removed. We are happy to assist you with all formalities associated with purchasing a vehicle. Please inform us of your requirements and suggestions—we will take care of them! Among other services, we can offer the following for an additional charge: * Trade-in of your old vehicle * TÜV / safety inspection * Complete export handling * Financing brokerage * Export license plate application * Vehicle transfer * Vehicle registration * Vehicle recovery and transport Godjyc Rhpspfx Ag Tobh – Your VTS Team

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2010, celková dĺžka: 13 140 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, rázvor náprav: 9 010 mm, Rok výroby: 2010, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Zdvíhacia náprava = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 245/70 R 17.5 Značka náprav: SAF Brzdy: bubnové brzdy Odpruženie: vzduchové odpruženie Zadná náprava 1: dvojmontáž; riadená; profil pneumatiky vľavo vnútri: 20%; vľavo vonku: 20%; vpravo vnútri: 20%; vpravo vonku: 20% Zadná náprava 2: dvojmontáž; riadená; profil pneumatiky vľavo vnútri: 40%; vľavo vonku: 40%; vpravo vnútri: 40%; vpravo vonku: 40% Zadná náprava 3: dvojmontáž; riadená; profil pneumatiky vľavo vnútri: 25%; vľavo vonku: 25%; vpravo vnútri: 25%; vpravo vonku: 25% Hmotnosti Prevádzková hmotnosť: 13 060 kg Gbedpsxzt H Dsfx Ag Toh Užitočné zaťaženie: 34 940 kg Celková hmotnosť: 48 000 kg Funkčnosť Výška ložnej plochy: 90 cm Stav Poškodenia: žiadne Identifikácia ŠPZ: OK-58-YS