Langendorf Náves S Nízkym Nakladacím Zariadením kúpiť použité (60 494)

Stav: nový, pohotovostná hmotnosť: 8 900 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 200 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 900 mm, celková dĺžka: 13 300 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17,5, farba: červená, Rok výroby: 2026, Výbava: ABS, Trojoseový náves nízkopodlažný s dvojdielnymi oceľovými rampami, hydraulicky ovládanými. Rozšíriteľný na šírku 3000 mm, labutí krk s hliníkovými bočnicami 320 mm. 3. náprava riadená s blokovaním pri cúvaní. Drevená podlaha hrubá 70 mm. Ijdpfx Aoyxfndegljar

Stav: použitý, Rok výroby: 1985, 1985 | Langendorf SATÜ 18/18 Úplne zrekonštruovaný | Nízkozdvižný náves 📍Lokalita: Rakúsko, Eberdorf 🚛 Doručenie dostupné na vašu adresu – použite našu kalkulačku dopravy pre odhad nákladov na prepravu! 💰 Kúpte teraz za 13 900 EUR alebo dajte ponuku. Platba pri doručení je možná za prijateľný poplatok (podlieha schváleniu)* 👷‍♂️ Skontrolované nezávislým odborníkom 15 kontrolných bodov 6 schválených ✅ 0 nedokonalostí ℹ️ 0 závad ⚠️ 📌 Komentár inšpektora: Čerstvo zrekonštruované, po oprave nepoužité. 📄 Chcete vidieť kompletnú inšpekciu, ďalšie fotky alebo video? Tip: Referencia „39629 Equippo“ sa často používa pri vyhľadávaní ďalších detailov online. Iasdpjyq H Eysfx Aglsr 💡 Prečo je tento stroj a naša služba výnimočná: ✔ Dôkladná kontrola odborníkmi ✔ Dodávka na pracovisko k dispozícii ✔ Záruka vrátenia peňazí ✔ Bezpečné a flexibilné platobné možnosti 🔄 Zvažujete ďalšie možnosti strojov? Ponúkame užitočné nástroje a zdroje pre všetkých majiteľov a operátorov strojov – jednoducho dostupné na našej platforme.

Stav: použitý, Rok výroby: 2013, 2013 | Hiebenthal TTH 18 | Nízkozdvižný náves 📍 Umiestnenie: Nemecko, Rodgau 🚛 Doručenie k vám je možné – použite našu kalkulačku dopravy na odhad prepravných nákladov! Iaodjyq H Hkopfx Aglsr 💰 Kúpiť ihneď za 13 500 EUR alebo urobte ponuku. Platba pri dodaní je možná za mierny poplatok (podlieha schváleniu)* 👷‍♂️ Skontrolované nezávislým expertom 11 kontrolných bodov: 6 schválených ✅ 5 čiastočne v poriadku ℹ️ 0 výhrad ⚠️ 📌 Komentár inšpektora: Funkčný – vyžaduje určitú pozornosť a ošetrenie proti korózii 📄 Chcete vidieť kompletnú inšpekciu, ďalšie fotografie alebo video? Tip: Referencia „39981 Equippo“ sa často používa pri vyhľadávaní bližších detailov online. 💡 Prečo je tento stroj a náš servis výnimočný: ✔ Dôkladná kontrola odborníkmi ✔ Dovezieme priamo na stavbu ✔ Záruka vrátenia peňazí ✔ Bezpečné a flexibilné možnosti platby 🔄 Zvažujete aj iné stroje? Ponúkame užitočné nástroje a zdroje pre všetkých vlastníkov a operátorov techniky – jednoducho dostupné na našej platforme.

Stav: dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 4 100 kg, maximálna hmotnosť nákladu: 34 900 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2021, ďalšia kontrola (TÜV): 05/2026, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17,5, farba: čierny, Rok výroby: 2021, Kontajnerová nadstavba Multicont ATL pre 40 a 45 stopové kontajnery, výmenná nadstavba Swap Body 45 stôp, odkladacia schránka, zadný podbehový chránič pre 45 stôp vysúvateľný, podvozok dostupný v 91161 Hilpoltstein. Iaedsvrz Nxopfx Agler

Stav: použitý, pohotovostná hmotnosť: 10 650 kg, maximálna hmotnosť nákladu: 40 310 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 650 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear straight gooseneck design - 3 pairs of lashing rings (LC 5,000 daN) Loading platform: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the external frame of the platform for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles covered with checker plate Ijdpfxjxfa E Ue Aglsar Axles and Tyres: - BPW axles, 2 fixed axles, 2 self-tracking axles - Air suspension, drum brakes, lifting/lowering function - Self-tracking axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake System: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-color Novagrau Accessories included: - Spare wheel carrier in front of front wall - 2" king pin - Galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 4 wheel chocks with holder on the front wall - Galvanized folding supports under the bevel of the platform - Bracket for beacon light at the rear of the semi-trailer - Zinc-plated extendable width extensions, approx. 230 mm per side - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Gooseneck and rear plate each with a warning sign bracket including socket left and right - Mudflap at the rear - European reflective signs (red-yellow) at the rear of the semi-trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - On the gooseneck, removable ALU side walls and rear wall approx. 2,440 x 400 mm - Removable galvanized rear stanchions (body length approx. 2,560 mm) - 7 pairs of container locks: 1x 20ft container on the platform; 1x 40ft container on the platform; 1x 40ft container on the gooseneck; 2x 20ft containers - 7 pairs of pockets for plug-in stanchions 100 x 50 mm in the outer frame of the platform - Lifting axle at the front axle with TEBS E control, depending on the current axle load and cargo condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - On the checker plate on the gooseneck and platform, painted sand layer for anti-slip protection - Four extendable warning panels (approx. 400 mm extension), approx. 423 x 423 mm, each with a positioning light - Bracket for beacon on the warning panels - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%), hot-finished

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck Iedpfx Aoi Ai E Rjgloar - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: použitý, pohotovostná hmotnosť: 14 640 kg, maximálna hmotnosť nákladu: 27 760 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2009, zavesenie: vzduch, farba: modrá, Stav - Veľmi dobre zachované vozidlo od prvého majiteľa Kategória - Návves Značka - Nooteboom Model - MCO-48-03 - 3-nápravový nízkoložný náves Mesiac registrácie - 09 Iodpfown H Anox Agljar Rok registrácie - 2009 Celková hmotnosť v kg - 42000 Prevádzková hmotnosť v kg - 14640 Užitočné zaťaženie v kg - 27760 Farba - Modrá Počet náprav - 3 Obchod/Export - Čistá cena v € - 29990 Zmeny, medziobchod a chyby vyhradené Telefón +49 551 50 84 912

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 9 000 kg, maximálna hmotnosť nákladu: 29 000 kg, celková hmotnosť: 38 000 kg, prvá registrácia: 08/2020, farba: červená, Rok výroby: 2020, ES-GE 2-axle lowbed trailer, non-extendable, Tridec steering system Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Unladen weight +/- manufacturer tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing clearance (tractor): approx. 2,100 mm Fifth wheel height: approx. 1,150 mm B dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Loading height raised bed: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Tractor unit data: A dimension: approx. 4,500 mm Fifth wheel height: approx. 1,150 mm Swing clearance: approx. 2,100 mm Chassis: - Made from high-grade fine-grained steel - Lowbed in rigid design - Axle unit non-detachable - Without excavator arm recess Kingpin: - 2'' kingpin Landing gear: - Without front landing legs Axles: - 2 x 10,000 kg axles (17.5"), technical 12,000 kg each - Gigant brand - Closed drum brakes. Asbestos-free brake linings - Automatic slack adjusters. Central alignment - Axle spacing approx. 1,360 mm Iaodpfxeu U Np Tj Aglor Suspension: - Air suspension with raise/lower function - 2nd driving height for air suspension (+ approx. 30 mm) Steering: - Hydraulic axle steering - All axles steered. "Tridec" brand Tyres: - 9 tyres, 245/70 R 17.5, load index 146/146 F - Continental tyres - Steel rims Brakes: - Dual-line air brake system per EC directive, "Knorr" brand - Automatic load-dependent brake force regulator - Controlled via standard red/yellow air couplings in accordance with ISO 1726 - Electronic brake system, "EBS", 7-pin socket as per ISO 7638, fitted at front, according to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Spring-actuated parking brake - 4 wheel chocks with holders - Without flexible hoses (Wendeflex) to the tractor unit - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load display Underrun protection: - Integrated into rear end plate Side frame: - Side frame made of UNP steel approx. 200 mm Load securing: - 13 lashing points per side with 13,400 kg traction, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity at the rear of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with approx. 13,400 kg traction at lowbed rear upright section - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side welded externally to the main frame Floor: - Approx. 28 mm hardwood flooring with Omega profiles, laid between the main beams - Tread plate (approx. 8/10 mm) above the axle unit Front wall: - Designed as a storage box with lid, approx. D 400 x H 450 mm, extending the full width of the loading platform, corners chamfered Sideboards: - 3 removable anodized sideboards on gooseneck, approx. 2,440 x 400 mm - Removable, galvanized stakes at rear Galvanization: - All steel parts shot blasted - Spray-galvanized chassis Paintwork: - Primed and single-color painted in RAL 3002 signal red - Axles, landing gears KTL-coated, black. Wheels silver

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: YA9TL510050113953, pohotovostná hmotnosť: 27 720 kg, maximálna hmotnosť nákladu: 70 000 kg, celková hmotnosť: 100 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2005, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 14 200 mm, šírka ložného priestoru: 3 250 mm, celková dĺžka: 23 950 mm, celková šírka: 3 250 mm, celková výška: 1 050 mm, zavesenie: hydraulika, farba: modrá, Rok výroby: 2005, počet osí: 7, Na predaj je nízkopodlažný náves značky Faymonville. Počet náprav 2+5 = 7 Bol vždy servisovaný vo vlastnej dielni a je vo výbornom stave. Náves bol používaný výlučne na prepravy v EÚ – pobaltských krajinách, Nemecku a okolí. Približne 1-2 krát za tri mesiace. Nízkopodlažný náves sa nachádza v Lotyšsku, 3405 Liepaja! Detaily podľa obrázkov! Ijdpex Afbvofx Aglear

Stav: použitý, pohotovostná hmotnosť: 7 440 kg, maximálna hmotnosť nákladu: 42 000 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, farba: červená, brzda prívesu: príves s brzdou, Rok výroby: 2009, Výbava: ABS, Na predaj je robustný HRD plochý náves, typ SPLB 3 S, rok výroby 2009, so skontrolovanou čelnou stenou EN 12642-XL a bohatou výbavou. Druhá čelná stena na premiestnenie / variabilne montovateľná Zasúvacie stĺpiky Kontajnerové zámky (8 ks) integrované v podlahe – vhodné pre 20 ft / 40 ft kontajnery Osvetlené výstražné tabule na prepravu nadrozmerných nákladov (výsuvné) Pneumatiky s viac ako 50 % dezénu Bočné steny čiastočne prítomné (úplnosť neoverená) Iasdpfx Agjx Akvrjlor Drevená podlaha so solídnou konštrukciou, stopy používania zodpovedajúce veku

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: Iaodpfx Agoup U Hzjljr - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 900 kg, Podvozok: - Pevná oceľová rámová zváraná konštrukcia s predným zalomením rámu a rovným ložným povrchom so skosením vzadu cca 500x100 mm - Krk rámu 200 mm s prednými skosenými rohmi - Skosený koniec labutieho krku cca 500 x 100 mm (vonkajší rám v oblasti zadného skosenia opatrený stúpacími rebrami) - 2 polohy kráľovského čapu s výmenným 2” čapom - Vonkajší rám uzavretý smerom von, dierovaný profil - Ložná plocha s výsuvným centrálnym rámom, výsuv cca 2 000 mm, po 500 mm s pneumatickým aretovaním - Rám pred a za delením so stupňom 80x80 mm - Spevnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku - Bez výsuvných rozširovacích prvkov na ložnej ploche, pripravené na dodatočnú montáž (vodicí rúry zvarené v ráme) - S bagrovo jamou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začína cca za 2. nápravou po koniec vozidla - 1 pár kolových jám medzi 1. a 2. nápravou s oceľovým krytím (Körapur povrch), hĺbka cca 400 mm - Proti podbehnutiu = predĺžený záverečný plech - Zadné podpery s rýchlym spúšťaním Nápravy, riadenie a pneumatiky: - BPW vzduchové nápravy, každá 10 t nosnosť, priemer vankúša 360 mm - S-cams 300/200 mm, bezazbestové brzdové obloženie - Automatický napínač ťahadla - Zdvih a spúšťanie celkový zdvih cca 200 mm - 2. jazdná poloha cez guľový ventil +50 mm - 1. náprava zdvíhacia (káblovaná cez EBS), automatické prepínanie s núdzovým mechanickým ovládaním tlačidlom na návesu - 3. náprava vlečená, s elektrickou a mechanickou aretáciou - 12 oceľových diskov, 10-dierové, so stredovým upevnením - 12 pneumatík 245/70 R 17.5 143/141J, bezdušové - Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: - Na labutom krku zasúvateľné bočnice a zadné čelo, výška cca 400 mm - Držiak rezervného kolesa - Bočný hliníkový nárazník - 4 podkladové kliny vrátane držiakov - Podlhovastý držiak ŠPZ v záverečnom plechu - 1 zasúvateľná ECE tabuľa vzadu - 11 párov ZK modulov 10t naboku: - 2x na labutom krku - 2x na ložnej ploche pred výsuvom - 7x za výsuvom - Výsuvné výstražné tabule vrátane 3 pozičných svetiel vpredu na oporných nohách a vzadu pred záverečným plechom, bezstupňovo vysúvateľné na šírku ložnej plochy do 4 500 mm - 4 zasúvateľné držiaky pre výstražné tabule v rúrkach na ložnej ploche - 6 párov zásuvných vreciek na laty 100x50 mm po bokoch - 2 priečne rady zásuvných vreciek na laty 100x50 mm na labutom krku od vonkajšieho rámu do hlavného rámu (1x pred a 1x za kráľovským čapom) - 3 priečne rady zásuvných vreciek na laty 100x50 mm na ložnej ploche od vonkajšieho rámu do hlavného rámu (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou) - 2 páry oceľových dosiek v ložnej ploche pre zámky na kontajner na 1x 20ft kontajner - Gumová zásterka namontovaná na ochranu proti podbehnutiu Iasdpfx Agjxnnk Djljr Náves je voliteľne dostupný s rampami.

Stav: nový, pohotovostná hmotnosť: 9 800 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 9 800 kg, Výbava: ABS, Chassis: - Robust steel frame welded construction with front frame cranking and level loading platform, rear bevel approx. 500x100 mm - Neck of frame 200 mm with beveled front corners - Sloped end swan neck approx. 500 x 100 mm (ribbed anti-slip strips on outer frame in the area of the rear bevel) - 2 king pin positions with exchangeable 2" king pin - Outer frame fully welded as perforated external frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, can be locked pneumatically in 500 mm increments - Frame before and after separation with 80x80 mm step - Reinforced frame design / point load supported at center of gravity when retracted - No extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame) - With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (Körapur-coated), depth approx. 400 mm - Underrun protection = extended end plate - Drop leg rear supports Ramps: - 2 pcs. special design two-piece loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden decking - Incl. ribbed anti-slip strips on ramps - Can be secured in travel position with lashing straps - Operated via control lever mounted at rear, RH side of chassis - Laterally hydraulically adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears with single-side operation and load equalization Axles, Steering, and Tyres: - BPW air suspension axles, max. 10 t axle load each, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower system, total travel approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle lift axle (wired via EBS), activation fully automatic with emergency operation by push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered offset mounting - 12 tyres size 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring system Accessories: - Plug-in side and rear walls on swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection Iasdpfx Agsxgm S Dsljr - 4 wheel chocks - 1 plug-in ECE rear panel - 11 pairs ZK-modules 10t each, on sides: - 2x on swan neck - 2x on platform before extension - 7x after extension - Extendable warning boards incl. 3 position lamps each, mounted at front landing gears and rear before end plate, steplessly extendable to platform width of 4,500 mm - 4 mounting slots for warning boards in stake pockets on load platform - 6 pairs of side stake pockets for 100x50 mm plug-in stakes - 2 transverse stake pocket rows for 100x50 mm stakes across swan neck from outer frame to main frame (1 before and 1 after king pin positions) - 3 transverse stake pocket rows for 100x50 mm stakes across load platform from outer frame to main frame (1 before extension, 1 after extension, 1 after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to fit 1x 20ft container - Rubber skirt fitted to underrun protection

Stav: nový, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, prevádzková hmotnosť: 10 100 kg, Výbava: ABS, Chassis: - Stable welded steel frame construction with front frame drop and flat load area, rear chamfer approx. 500x100 mm - Neck section 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear chamfer) - 2 kingpin positions with interchangeable 2” kingpin - Outer frame closed outwards with perforated profile for lashing with tension belts (no chains possible) - Reinforced frame version / point load at center of gravity - Provisions for extendable load platform wideners - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, plus 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only in conjunction with electro-hydraulic power pack) - Width approx. 800 mm - Wooden decking - Including traction ribs on ramps - Secured in transport position with tension belts - Operation via control lever mounted rear right in direction of travel - Sideways hydraulically adjustable Floor: - 35 mm larch wood flooring with aluminium omega profiles Landing gear: - Mechanical 24-ton landing legs, single-sided operation with compensating device Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive height via ball valve +50mm Iodewviwkepfx Agljar - 1st axle with lifting function (wired via EBS), fully automatic control with mechanical emergency activation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mounted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminum underride protection - 4 wheel chocks - Elongated license plate holder in end plate - 1 ECE removable sign board on the rear - 11 pairs ZK modules 10t at the sides: - 2x on the gooseneck - 9x on the load platform - Metal fenders with clear-pass - Extendable warning plates incl. 3 position lights each, front at landing legs and rear ahead of end plate, steplessly extendable up to load width of 4,500 mm - 4 sockets for warning plates storable in stake pockets on load platform - 6 pairs side stake pockets for 100x50 mm stakes - 2 crosswise rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1 in front and 1 behind kingpin positions) - 3 crosswise rows of stake pockets for 100x50 mm stakes on load platform from outer frame to main frame (1 in front area, 1 in front of 1st axle and 1 behind 3rd axle) - 2 pairs steel plates in load platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder Iedpfxshlz S Ne Aglear •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 8 950 kg, maximálna hmotnosť nákladu: 40 050 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 950 kg, Výbava: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat load area with rear taper approx. 500x100 mm - Neck section 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with exchangeable 2” king pin - Outer frame closed outward as punched external frame for lashing with tension belts - Reinforced frame design / point load at the centre of gravity - Provisions for extendable loading platform wideners - With excavator well, depth approx. 220 mm, width approx. 600 mm, beginning approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended final plate - Drop-down rear support legs Ramps: - 2 single-piece aluminium drive-on ramps, spring-assisted Ijdpfx Agjwu Agijljar - Length x width approx. 2,500 mm x 600 mm - Can be secured with tensioning straps for driving position - Manually adjustable sideways Floor: - 35 mm larch wood floor with aluminium omega profiles Landing Legs: - Mechanical 24t landing legs with single-side operation and push-pull equalizer Axles, Steering, and Tyres: - BPW air-suspended axles, each with 10t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting/lowering device with total lift approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic activation, with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Includes tyre pressure monitoring Brake System: - Dual-circuit brake with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-type parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, spray galvanizing of the chassis and priming - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Conspicuity tape on sides and rear in yellow Accessories: - Removable side and rear walls on gooseneck approx. 400 mm high - Spare wheel holder - Aluminium bump stop - 4 chocks - Sheet metal fenders with Clear-Pass - Elongated license plate holder on end plate - 1 ECE plate at the rear, plug-in - 11 pairs ZK modules 10t lateral: - 2x on gooseneck - 9x on load platform - Without rear towing eyelets - Extendable warning signs incl. 3 position lamps each, mounted at landing legs in front and behind, steplessly extendable to 4,500 mm loading width - 4 holders for warning signs, insertable in stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load area for container locks to carry 1x 20ft container - Rubber skirt mounted on underrun protection

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised Isdpswcmhajfx Agljar - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides Ijdpfx Aju Hp Hrsglsar - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Iodpfx Ageuadk Nsloar Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings Ijdpfx Agoma Hf Rjljar • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the bulkhead • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Iedpfx Aoiu Er Asglear - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. Isdpfsrigw Rsx Aglsar 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings Iodpjtphtmefx Aglsar 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm Isdjwhywfjpfx Agloar - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards Iedpfjhlz R Ssx Aglsar - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished