Wörmann Bauhl119.62/247 Rampen kúpiť použité (506)

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip Godpfsl Sl Izox Amgjbl 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, maximálna hmotnosť nákladu: 8 840 kg, celková hmotnosť: 11 800 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 200 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková délka: 8 000 mm Délka ložné plochy: 6 200 mm včetně zadního zkosení Další informace: plus přepravní náklady / příprava ze skladu 26639 Wiesmoor: 1 280,00 € bez DPH Šířka ložné plochy: 2 480 mm Podvozek: centrální nápravový přívěs Jemnozrnná ocelová svařovaná konstrukce Vnější rám s mírným zkosením, nová verze s "Load-Lock profilem" pro uchycení upínacích pásů Pár vnějších vázacích oček v podlaze, každé 5 t 1x vpředu v rozích, 1x před a 1x v zadním zkosení 6 párů vnějších vázacích oček v podlaze/vnějším rámu, každé 5 t Opěrná noha vpředu Sklopná podpěra vzadu Klíny pod kola s držákem Boční ochrana proti podjetí – hliník Podjezdová zábrana – pozinkovaná ocel Zadní zástěrka po celé šířce (není v kombinaci s držákem na vysokozdvižný vozík) Čtvrtměsíční blatníky 1 plastová uzamykatelná skříňka na nářadí, šířka = 600 / výška = 425 / hloubka = 460 mm Tažné zařízení pro centrální nápravový přívěs Tažná oj s certifikovaným tažným okem Ø40 mm Výškově nastavitelná tažná oj pomocí šroubu, max. rozsah 300 mm Nápravy a odpružení GFA nebo BPW nápravy dle volby výrobce, s kuželíkovými ložisky a brzdou s S-cam "Laserové měření náprav/podvozku" - snížení opotřebení pneumatik a spotřeby paliva Parabolické pružiny s bezúdržbovými ocelovo-gumovými ložisky a mechanickým vyrovnáním zatížení náprav Brzdová soustava Dvouvodičová pneumatická brzdová soustava Barevné vedení hadic pro snadný servis Ruční šroubová parkovací brzda 2 nezaměnitelné spojovací hlavice vpředu s propojovacími vedeními k tahači 24 V ABS a ALB s konektorem ABS vpředu, včetně propojovacího kabelu Pozor: Přívěs smí být tažen pouze tahači, které zajišťují funkci ABS! Kola a pneumatiky 235/75 R17,5 - výrobce dle volby dodavatele Ocelová kola, tovární stříbrná Elektrická instalace 24 V, vícekomorová světla, po stranách žluté LED osvětlení 2 bílé poziční LED světla vpředu 2 bílo/červené vedení pruhu vzadu 2x 7pólové nezaměnitelné konektory vpředu vč. propojovacího kabelu Podlaha Ocelová/rýhovaná podlaha pro vysokou bodovou zátěž Poznámka: Dochází k mírnému vlnění podlahy v důsledku svařování! Délka ložné plochy cca 6 200 mm Zkosení vzadu cca 900 mm Čelo / rohové sloupky vpředu 25 mm hliníkový dutý profil, výška 400 mm Bočnice 25 mm hliníkový dutý profil, výška 400 mm, sklopné a odnímatelné Středové sloupky Bez středových sloupků Zadní stěna / rohové sloupky vzadu 1 pár ocelových sloupků připevněných k rámu s držákem pro aretaci nájezdových ramp, šířka vjezdu cca 2 430 mm Nájezdové rampy Ocelové rampy, délka 2 300 mm, šířka 510 mm, posuvné do stran s držadlem na rampách s dřevěnou výplní (špičky z oceli/rýhovaného plechu) s plynovou vzpěrou pro obsluhu jednou osobou Provozní pokyny Uvedená celková hmotnost je technicky možná; v závislosti na druhu nákladu nemusí být dosaženo celkové hmotnosti při dodržení povolených nápravových/tlakových a sedlových zatížení. (Nevhodné rozložení nákladu může způsobit špatné jízdní vlastnosti a sledování přívěsu) Země registrace/Registrační značky Německo s Dekra přejímkou a osvědčením (podle §13 EG - FGV) Gbjdpfxsyl E Dqj Amgsl 24/7 servisní hotline připraveno na jednoradový držák SPZ Konturové označení reflexními pásky dle ECE R 048, bílé po stranách a červené vzadu Lakování Rám DB 7350 Novagrau Čelo – hliník Bočnice – eloxovaný hliník Nájezdové rampy – žárově zinkované

Stav: použitý, maximálna hmotnosť nákladu: 24 000 kg, celková hmotnosť: 34 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/1988, ďalšia kontrola (TÜV): 06/2026, Labuťový krk Dĺžka: 3350 mm Šírka: 2490 mm Polomer prehnutia: 2300 mm Zaťaženie na sedlo: 14 500 kg Výška pripojenia: 1 300 mm Hlboké ložisko Nakladacia plocha dĺžka: 4660 mm vrátane 400 mm skosenia Šírka: 2 500 mm Rozšíriteľné na 3 000 mm Nakladacia výška: 650 mm Podvozok Nakladacia výška naložené: 900 mm Dĺžka: 3 000 mm vrátane 800 mm skosenia Godexc Dbhjpfx Amgebl Šírka: 2 500 mm Skosenie: 800 mm Zadné podopretie hydraulické 2-dielne hydraulické rampy Dĺžka 1: 2 500 mm Dĺžka 2: 1 100 mm Šírka: 720 mm Zaťaženie na sedlo: 14 500 kg Zaťaženie zadnej nápravy: 2 x 10 000 kg Celková hmotnosť: 34 500 kg Užitočné zaťaženie: 24 000 kg Vlastná hmotnosť: 10 500 kg

Stav: použitý, maximálna hmotnosť nákladu: 5 300 kg, celková hmotnosť: 8 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2015, Loading length 6,000 mm Width 2,000 mm Loading height 2,660 mm Platform height 640 mm Gbsdpfxswy A Ude Amgel Ramps: 1,900 mm long, 450 mm wide, with plug-in grid surface Rear drop pipe supports Height-adjustable drawbar, 40 mm eye, 1,700 mm long ABS Tyres: 215/75 R 17.5

Stav: nový, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference number: 11612 * NEW VEHICLE, immediately available, in RAL 9016 traffic white * Home delivery available at additional cost! * GVW: 11,900 kg, payload: 8,750 kg * Galvanized floor 5m x 2.42m x 0.5m; sideboards swingable, foldable, and detachable; pre-equipped for retrofitting additional sideboard extensions * Bulkhead hot-dip galvanized * Lockable compartment under the tipping bed for access ramps Gsdpfxjyl Ebpj Amgsbl * Includes loading ramps 3.31m, 8t per pair * 4 UVV load securing rings LC 5000daN front and rear * 8 recessed and foldable lashing rings LC 3000daN in the tipper floor (centered) * Mesh hooks * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Galvanized chassis frame * Tyres: 235/75R 17.5 (set of 4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12V+24V * Side marker lights with indicator function * Bolted, galvanized rear stanchions * Excavator bucket tray mounted on the front wall ---- Please request a quote – additional equipment available Financing from as little as €405 net per month over 72 months, no down payment, no final installment. An offer from our financing partner "FM LeasingPartner" ---- Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours, visits are possible by arrangement. Whatsapp Leasing, financing, and trade-ins available ----

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2013, dĺžka ložného priestoru: 13 330 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 2 600 mm, zavesenie: iný, veľkosť pneumatiky: 385 65 R 22,5, Rok výroby: 2013, Výbava: ABS, Konfigurácia náprav Rozmer pneumatiky: 385 65 R 22,5 Brzdy: kotúčové brzdy Zadná náprava 1: Profil pneumatiky vľavo: 40%; Profil pneumatiky vpravo: 40%; Odpruženie: vzduchové odpruženie Zadná náprava 2: Profil pneumatiky vľavo: 40%; Profil pneumatiky vpravo: 40%; Odpruženie: vzduchové odpruženie Zadná náprava 3: Profil pneumatiky vľavo: 40%; Profil pneumatiky vpravo: 40%; Odpruženie: hydraulické odpruženie Hmotnosti Pohotovostná hmotnosť: 9 000 kg Užitočné zaťaženie: 30 000 kg Celková prípustná hmotnosť: 39 000 kg Funkčné Chladiaci motor: nafta a elektrický (16 824 motohodín nafty; 4 412 elektricky) Hrúbka steny: 65 mm Stav Technický stav: dobrý Optický stav: dobrý = Ďalšie možnosti a výbava = - Zadné dvere - Vzduchové odpruženie - Mono temp/ single temp - Kotúčové brzdy - Delia priečka = Poznámky = Chladiace zariadenie značky: Thermo King Gbjdpfx Aewylx Sjmgjl

Stav: nový, * OKAMŽITE DOSTUPNÝ * vrátane sklopnej ložnej plochy / podpery vpredu aj vzadu / nájazdové rampy Technické údaje: • Značka: Martz • Model: SMART KARGO 235 • Typ vozidla: skriňový príves • Stav vozidla: nové vozidlo • Prvá registrácia: bez prvej registrácie • TÜV/STK: 3 roky od prvej registrácie • Vnútorné rozmery (DxŠxV): 223 x 147 x 146 cm • Vonkajšie rozmery (DxŠxV): 340 x 190 x 196 cm • Povolená celková hmotnosť: 750 kg • Pohotovostná hmotnosť: 439 kg • Užitočné zaťaženie: 311 kg • Podvozok: nízko uložený príves (kolesá vedľa nadstavby) • Pneumatiky: 155/70R13 • Podvozok: gumová náprava KNOTT • Oporné koleso: áno • Povolenie na 100 km/h: áno POPIS • Podlaha a steny z preglejky • Zosilnené pevne skrutkované V-oje, sklopné • Veľmi stabilný zváraný oceľový rám • Rám kompletne žiarovo pozinkovaný ponorným kúpeľom • 2x praktické nájazdové rampy, počas jazdy sa dajú uložiť na vnútornú stranu dverí • Pozdĺžne nosníky po celej dĺžke • Rám vďaka stabilnej konštrukcii veľmi torzne tuhý • 4 zapustené kotviace úchyty v podlahe • 2-krídlové zadné dvere s uzamykateľným otváracím tyčovým zámkom • 2x manipulačné madlá vpredu • Bezúdržbová gumová náprava KNOTT • 100 km/h schválenie od výrobcu • 13-pólová zásuvka • Cúvacie svetlo • Veľkorozmerné bezpečnostné osvetlenie • Integrované zadné hmlové svetlo • Osvetlenie integrované do zadného rámu • 2x zadné podpery • 2x predné podpery • Oporné koleso namontované Doplnková výbava – na vyžiadanie: • Motocyklové držiaky, • Upínacie popruhy na motocykle, • Upínacie popruhy • Ďalšie kotevné oká • Kotviace lišty na stenách aj v podlahe na napínacie popruhy a rozpierky • Rozpierky • Vnútorné osvetlenie • Cúvacie svetlo • a ďalšie Nové vozidlo so zárukou a technickou kontrolou. - Možnosť financovania alebo leasingu - Možnosť dodania v rámci celej SR - Všetky ceny sú s DPH - Technický preukaz možno poslať vopred alebo vieme vybaviť prevádzkové značky (Slovensko) - Exportné značky vrátane colného odbavenia možné Popisy a obrázky sú chránené autorským právom!! Godpfx Amjx Tiytogebl Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Viac ako 1200 prívesov ihneď dostupných skladom! Sme viac ako 30 rokov odborným predajcom a servisom značiek Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Chyby, zmeny a medzičasný predaj vyhradené -

Stav: nový, vrátane rampového tunela s rampami / uzavretá ložná plocha s mnohými upevňovacími bodmi / ručný lanový navijak Technické údaje: - Značka: Martz - Model: GT PLATEAU 450/2 S 2,7T - Typ vozidla: Autoprepravník - Stav vozidla: Nové vozidlo - Prvá registrácia: bez prvej registrácie - STK/Kontrola: 2 roky od prvej registrácie - Vnútorné rozmery (d x š x v): 449 x 211 x 0 cm - Vonkajšie rozmery (d x š x v): 600 x 215 x 89 cm - Povolená celková hmotnosť: 2 700 kg - Pohotovostná hmotnosť: 625 kg - Nosnosť: 2 075 kg - Podvozok: vysokonavývesný (kolesá pod plošinou) - Pneumatiky: 195/55R10C - Náprava: KNOTT gumová torzná náprava - Podporné koleso: Áno - Povolenie na 100 km/h: Voliteľné, možná dodatočná inštalácia POPIS - Protišmyková, vodeodolná preglejková podlaha - vrátane ručného lanového navijaka s brzdou - Zásuv na nájazdové rampy pod ložnou plochou - 2x oceľové rampy na naloženie - Extrémne pevný zváraný oceľový rám - Kompletne žiarovo zinkovaný rám - 10x upevňovacie oko na boku rámu (600 daN/kg) - Dodatočná montáž bočníc možná kedykoľvek - Automatická spätná jazda - KNOTT nájazdová brzda a parkovacia brzda - Extra pevné skrutkové "V" ojisko, zosilnené - 13-kolíková zástrčka - Cúvacia lampa - Veľkorozmerové bezpečnostné osvetlenie - Integrovaná hmlová lampa - Osvetlenie zapustené v zadnom ráme - LED bočné obrysové svetlá vzadu vľavo a vpravo - Automaticky namontované podporné koleso Možné doplnkové príslušenstvo na vyžiadanie: - Povolenie 100km/h s tlmičmi kmitania kolies - Zarážka kolies Gjdpfx Asx S Rm Ssmgsbl - Bočnice - Ochrana proti krádeži - Rezervné koleso - Náradová skrinka - Cúvacia lampa - Upínacie pásy - a oveľa viac Nové vozidlo so zárukou a STK. - Financovanie alebo leasing možné - Celonárodná dodávka možná - Všetky ceny sú vrátane DPH - Technický preukaz možno zaslať vopred alebo je možné poskytnúť prevoznú poznávaciu značku (Nemecko) - Exportné značky vrátane colného deklarovania možné Popisy a obrázky sú chránené autorským právom! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Viac ako 1 200 prívesov k dispozícii okamžite! Sme už vyše 30 rokov špecializovaným predajcom a servisom pre Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix a mnoho ďalších značiek - Zmena, chyba a medzipredaj vyhradené -

Stav: použitý, maximálna hmotnosť nákladu: 18 000 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1991, dĺžka ložného priestoru: 8 200 mm, šírka ložného priestoru: 2 500 mm, Výbava: ABS, * ABS * BPW nápravy ----Nástavba: nízkozdvižný přívěs (2200+6000 mm), výška ložné plochy cca 900 mm, zadní část zkosená, nájezdová výška cca 750 mm, ocelovo-dřevěná podlaha, rozšiřitelný na 3 m, odpružené nájezdové rampy, upevňovací oka. Prodej pouze podnikatelům. PŘI EXPORTU JE TŘEBA UHRADIT POUZE ČISTOU CENU BEZ DPH!!!!! VEŠKERÉ ÚDAJE JSOU BEZ ZÁRUKY, ZVLÁŠTĚ TÝKAJÍCÍ SE VÝBAVY A PŘÍSLUŠENSTVÍ. Základem všech kupních smluv, faktur, proforma faktur, objednávek a prodejních jednání jsou naše VOP (viz tiráž/impressum). Gbjdpfx Amowdb Ttegol

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards Gedsl Tlhrspfx Amgjbl * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, prvá registrácia: 08/1998, celková dĺžka: 16 000 mm, celková šírka: 2 550 mm, Rok výroby: 1998, GOLDHOFER STZ -TL 3 -33/80 3-nápravový (labutí krk) polonízky náves s 3 riadenými nápravami, so sklopnou plošinou a hydraulickými rampami NÁVES BOL OBRÁBENÝ PIESKOM A LAKOVANÝ!! • ABS Godpfxewpknwj Amgobl • 3 x BPW ECO-Plus vzduchom odpružené nápravy • 3 x riadené nápravy • Zdvíhacie/spúšťacie zariadenie • Hydraulické, dvojdielne nájazdové rampy • Hydraulicky spúšťateľná plošina • Rozšíriteľný na 3 m šírky • Výstražné tabule • Konektor NATO pre elektrickú/hydraulickú pumpu • Celková dĺžka: 16.000 mm • Pohotovostná hmotnosť: 15.900 kg • Celková prípustná hmotnosť: 48.000 kg (technicky možné 48.000 kg) • Nosnosť: 32.100 kg • 4 x manometre zaťaženia náprav • Dvojmontáž pneumatík: 235/75 R17,5 - STK a kontrola bezpečnosti: !! nové !! - Nemecké vozidlo! Chyby a medzipredaj vyhradené!

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) Gbedpfxol Tnu Ao Amgel * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 24 640 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/1993, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 500 mm, ? Hydraulické oporné nohy ? Výklenky na kolesá ? 3 kapsy na kôly na každej strane ? 4 kotviace oká na každej strane ? Hydraulické rampy ? Bubnová brzda ? Vzduchové odpruženie ? Dvojmontáž kolies ? Nápravy SAF Gbedpexuykijfx Amgsl Všetky údaje bez záruky / Predaj medzičasom vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 4 500 kg, celková hmotnosť: 6 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/1979, ďalšia kontrola (TÜV): 04/2026, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 1 900 mm, výška ložného priestoru: 380 mm, celková šírka: 2 500 mm, celková výška: 3 000 mm, Rok výroby: 1979,

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm Gbsdpfx Amjrczm Djgel * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles Gbsdpjl Th Evsfx Amgsl * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 2 000 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2016, ďalšia kontrola (TÜV): 11/2025, Rok výroby: 2016, Výbava: ABS, SARIS TRAILER WITH 2-AXLE LOW-LOADER AND RAMP, TÜV VALID UNTIL 11/2025 ----VEHICLE EQUIPMENT---- * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * IDEAL FOR MINI EXCAVATORS, FORKLIFTS, ETC. * LENGTH: 4 M * PERMISSIBLE GROSS WEIGHT: 3,500 KG Gbodpfx Amouidc Rogel * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG * TIRE SIZE: 185 / 70 R13 * TÜV: 11 / 2025 * EXPORT SALES ONLY WITH DEPOSIT, MIN. €500 - €2,000 ----EXPORT DECLARATION, CUSTOMS, EXW IN 10 MIN. (APPROVED EXPORTER), 5-DAY, 30-DAY LICENSE PLATES AND 17–21 DAYS AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION! ORAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries a deposit of at least €500.00 / €1,000.00 is required. Changes, errors, and prior sale excepted! You can find additional vehicles on our website. Sales are made exclusively according to our general terms and conditions – see our website for details. Important note – Important information: Despite careful verification of all details in our offer, errors may still occur. Some of these might be caused by transmission errors in the systems of different platform providers. Therefore, please note all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for initiating a contract. The information provided here is not binding and does not constitute assured characteristics.

Stav: nový, najazdené kilometre: 100 km, výkon: 375 kW (509,86 k), typ paliva: nafta, typ prevodu: automatický, konfigurácia náprav: 3 nápravy, celková hmotnosť: 32 000 kg, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, emisná trieda: Euro 6, farba: biely, Rok výroby: 2026, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, 4-axle Volvo Machinery Transporter / Access Platform Transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tyres - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-roof long-distance safety cab FH - Cab auxiliary heater, 2 kW - 33 l fridge with freezer compartment under bunk - Air suspension on front axle(s) - Transmission/I-Shift control via operator panel on driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise control - Manual shifting possible in automatic mode (incl. kickdown) - Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system (drowsiness warning) - VEB Volvo Engine Brake - etc. WIESE body for access platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm usable length - Exterior width 2,550 mm - Loading height (top edge of floor) approx. 1,050 mm unladen - Robust, weight-optimised welded steel construction, box-type design - Short cross member distances for high point loads - Rear end beveled for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced version - Storage box inside at bottom in front of bulkhead - Grating floor - Suitable for 5,000 daN wheel load - Steel sheet toolboxes above axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, rated at 8 t, recessed into outer frame - Longitudinals with full-length Multi-X contour offering numerous lashing points (2.5 t each) - 4 lashing eyes (8 t) recessed at the rear (left/right/centre/centre) - 4 lashing eyes (8 t) recessed in front of bulkhead (left/right/centre/centre) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length: approx. 4,360 mm (2,725 mm + 1,635 mm) Platform width: approx. 850 mm per ramp - 2 single/slide-out ramps, both adjustable sideways - Ramps usable as loading ramps or as bridging ramps for warehouse logistics (slide-out remains closed), fixed section can be laid onto loading dock - Robust locking bar for transport security (alternative with tension strap) - 2 hydraulic rear supports with footplates, warning sound & indicator lamp in cab - Ramp and support drive via electro-hydraulics - Operation by wireless remote control and emergency controls on control block - Control block mounted in stainless steel toolbox on chassis side - Superwinch, pulling force 8.2 t, with approx. 20 m steel cable - Step with grip handles (right & left) for load area access - 5 stainless steel toolbox drawers, lighting as optional extra at increased price - Side panel cladding (see sample images – green vehicle) optional at extra cost - KTL body coating - Rear ball coupling trailer hitch, rated at 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on front wall - 4 LED work lights on chassis sides for perimeter illumination Gbjdpjw Itmrofx Amgol - 2 LED work lights at rear - 1 rotating beacon at rear, removable Stock vehicle is white cab with superstructure in nova grey (external frame paint in customer RAL colour upon request)

Stav: nový, najazdené kilometre: 100 km, výkon: 375 kW (509,86 k), typ paliva: nafta, celková hmotnosť: 32 000 kg, konfigurácia náprav: 3 nápravy, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, Rok výroby: 2026, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, 4-axle Volvo machine transporter / work platform transporter * Model: FH 500 8x2R * Trailing axle, electro-hydraulically steered, single tyres * Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle * FH long-distance safety cab * Cab parking heater, 2 kW * 33 l fridge with freezer compartment, under the bunk * Front axle(s) with air suspension * Gearbox / I-Shift operation via driver's seat control panel * I-Shift driving modes: Standard, Performance, and Economy * I-See with map-based topography and traffic information * Eco cruise control (cruise control) including brake cruise control * Manual shifting possible in automatic mode (including kickdown) Adaptive traction control * Adaptive cruise control (ACC) with collision warning and emergency braking function * Lane keeping assist * Side collision avoidance and turn assist (both sides) * Driver alert system for fatigue warning * VEB Volvo Engine Brake * etc. WIESE superstructure for platform and construction machine transport with hydraulic loading ramps With 2 pairs of wheel wells incl. wheel well covers Superstructure dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height, top of floor approx. 1,050 mm unladen - Made in robust, weight-optimised steel welded construction, box design - Short cross member spacing for high point loads Gedpfx Aow Itl Uemgjbl - Rear end bevelled for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Tool box inside bottom in front of the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel plate boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of recessed heavy-duty lashing rings, 8t, integrated into the outer frame - Longitudinal beams each with Multi-X contour along the entire length with numerous 2.5t lashing points - 4 lashing eyes 8t recessed at the rear (left/right/centre/centre) - 4 lashing eyes 8t recessed in front of the bulkhead (left/right/centre/centre) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps are two individual/telescopic ramps, both ramps are laterally adjustable - Ramp can be used as loading ramp and as drive-over ramp for warehouse operation (telescopic part remains closed), fixed ramp part can be placed onto a building ramp - Sturdy tension bar as transport lock (optionally with strap) - 2 hydraulic rear supports with footplate, warning buzzer and indicator light in cab - Ramp and support operated electro-hydraulically - Control via radio remote control and emergency operation at valve block - Valve block mounted in a stainless steel tool box on the side of the frame - Superwinch, 8.2 t pulling force, with approx. 20 m steel cable - Boarding steps with handrails left and right to access load area - 5 stainless steel drawer-style toolboxes, including lighting (optional at extra cost) - Side paneling as per sample photos (green vehicle) available as an option for extra cost - Superstructure coating KTL - Rear-mounted ball-type trailer coupling, 3.3 t - 4 LED work lights - 2 LED tail lights mounted at top of bulkhead - 4 external LED work lights on frame for area illumination - 2 LED work lights at the rear - 1 removable beacon at the rear The stock vehicle comes with a white cab and novagrau (custom RAL colour for outer frame available on request).

Stav: nový, najazdené kilometre: 100 km, výkon: 375 kW (509,86 k), typ paliva: nafta, celková hmotnosť: 32 000 kg, konfigurácia náprav: 3 nápravy, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 550 mm, Rok výroby: 2026, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, 4-axle Volvo machinery and access platform transporter Model: FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - FH safety long-distance driver cab - Cab auxiliary heater, 2 kW - 33 l cool box with freezer compartment under bunk - Air suspension on front axle(s) - I-Shift transmission control unit at driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco-Cruise-Control (cruise control) including brake cruise control - Manual shifting in automatic mode possible (incl. kickdown) - Adaptive traction control - Adaptive Cruise Control (ACC) with collision warning and emergency braking function - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system for drowsiness warning - VEB Volvo Engine Brake - etc. WIESE body for access platforms and construction equipment transport with hydraulic loading ramps Including 2 pairs of wheel recesses with wheel recess covers Body dimensions: - Length usable area: approx. 9,050 mm - External width: 2,550 mm - Loading height upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction in box design - Short cross-member spacing for high point loads - Rear end tapered for low drive-on angle - Outer frame profile 90° - Front wall reinforced - Storage box inside, below and in front of the bulkhead - Grating floor - Design suitable for 5,000 daN axle load - Steel sheet boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with Multi-X profile along the full length with multiple 2.5 t lashing points - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front of the bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length: approx. 4,360 mm (2,725 mm + 1,635 mm) Platform width: approx. 850 mm per ramp - Ramps designed as 2 individual/slide ramps, both ramps laterally adjustable - Ramp can be used as drive-on ramp as well as bridging ramp for warehouse equipment (sliding part remains closed); fixed ramp part is placed onto the loading dock - Sturdy tension bar as transport security (alternatively belt tension) - 2 hydraulic rear supports with plate, acoustic warning and warning light in cab - Ramp and supports operated via electro-hydraulics - Radio remote control as well as emergency manual control at the control block - Control block installed in stainless steel storage box, side-mounted on frame - Superwinch 8.2 t winch with approx. 20 m steel cable - Access steps with handgrips on both sides for access to load area - 5 stainless steel storage boxes as drawers, including lighting available as option for extra charge - Side panels as shown in example pictures (green vehicle), available as option for extra charge - KTL coating for body - Rear trailer hitch with ball head, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of front wall - 4 LED work lights mounted externally on chassis for area illumination - 2 LED work lights at rear - 1 removable revolving beacon at rear Gbjdpfx Ajw Itmlsmgsl The stock vehicle is painted with white cab and nova grey body (outer frame can be painted in RAL color of your choice upon request).

Stav: nový, pohotovostná hmotnosť: 757 kg, maximálna hmotnosť nákladu: 2 743 kg, celková hmotnosť: 3 500 kg, dĺžka ložného priestoru: 3 300 mm, šírka ložného priestoru: 1 800 mm, výška ložného priestoru: 300 mm, 3,30 m x 1,80 m x 0,30 m Celková hmotnosť 3500 kg, pohotovostná hmotnosť 757 kg, užitočné zaťaženie 2743 kg Gedowwv Tzjpfx Amgsbl Priemyselné oporné koliesko Rámpy & podpery

Stav: nový, pohotovostná hmotnosť: 1 020 kg, maximálna hmotnosť nákladu: 2 480 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 406 mm, šírka ložného priestoru: 200 mm, výška ložného priestoru: 30 mm, EDUARD trojstranný sklápěč 406x200x30 cm, 3500 kg, elektrické a ruční čerpadlo, včetně nájezdových ramp a podpěr, 4020-4-3O3-3563-P Gbodpfx Aswwv Avsmgjl

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Gbsdpfx Asya E A Njmgjl - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: Gbodpfxsl Thyxe Amgel * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)