Müller-Mitteltal 14,4 To Tand- Tiefl Mit 2- Seitenkipper kúpiť použité (59 382)

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: Hfjdpfel Tnvgjx Amhoi * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: Hfedjxptn Dspfx Amhoi ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 30 440 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40,0 ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátory * Bubnové brzdy ----Nápravy: * 4 x 11 tonové nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s hydraulickým systémom na zdvíhanie a spúšťanie a ventilom pre automatické vyrovnávanie výšky ----Očkové ťažné zariadenie: * Priame očkové ťažné zariadenie s 50 mm čapom a plynulo nastaviteľnou výškou ----Elektrická inštalácia / Osvetlenie: * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom signálu EBS – bez potreby inštalácie na strane nákladného vozidla * SmartBoard ako informačný nástroj s tlakovými senzormi pre zobrazenie zaťaženia nápravy pre každú nápravovú skupinu * 15-pólová elektrická zásuvka * LED koncové svetlá * LED obrysové svetlá (odnímateľné) vzadu ----Všeobecné montážne diely: * Balíky výstražných tabúľ vpredu a vzadu * 2 x náradie boxy z pozinkovanej práškovej ocele, približne 650 x 300 x 600 mm na pravej strane * Predná celistvá plastová ochranná kapotka blatníka * Zadné priame oceľové ochranné kryty blatníkov, každý s ochranou proti striekajúcej vode (zabraňuje rozptylu vody) * Bočná ochranná lišta ----Nízko podlažná plošina: * Predná časť otočnej plošiny predĺžená o 520 mm s 45° rohmi a 3 zapustenými úložnými priehradkami vrátane veka a možnosťou uzamknutia * Podlaha nad otočnou plošinou z 50 mm a v nízko podlažnej plošine z 60 mm ihličnatého dreva * Gumová podlaha 20 mm namiesto drevenej podlahy v jazdnej oblasti s dĺžkou nízko podlažnej plošiny 6 780 mm vrátane rampy * Gumová podlaha na rampe vľavo a vpravo, dĺžka približne 860 mm * Na každej strane 4 úchytné body pre nosníky (ale žiadne nosníky nie sú súčasťou) s možnosťou upevnenia záťaže do 2 ton * súčasne ----Podvozok: * Podvozok z vysoko pevnej jemnozrnnej ocele ----Upevňovanie nákladu (balík Lasi): Otočná plošina: * 2 páry 13,4-tonových úchytných bodov vo vonkajšom ráme otočnej plošiny Nízko podlažná plocha: * Po stranách, vždy 4 páry 10-tonových úchytných bodov vo vonkajšom ráme, vysúvateľné a zaťažiteľné v každom smere * Vzadu po stranách, vždy 2 páry 13,4-tonových úchytných bodov, otočných ----Rampy: * Gumová podlaha na sklopných rampách * Hydraulické sklopné rampy s hydraulicky vysúvateľnou prednou časťou, približne 4 650 x 720 mm * Hydraulické bočné posúvanie rampy a ventily pre udržanie nákladu ----Zadná opora: Hjdpfx Amsylfvgohjfi * Hydraulická zadná opora ----Rozšírenie: * 8 párov pozinkovaných výsuvných opier pre celkovú šírku 3 metre (ale nie na zadnej rampe) * Rozšírovacie dosky uložené na bočnej strane vľavo v úložnom priestore ----Úložný priestor pre lyžicu rýpadla: * Úložný priestor pre lyžicu rýpadla nad zadnou nápravou až po koniec rampy, približne D=2 100 mm x Š=740 x V=190 mm * 2 páry 6,4-tonových úchytných bodov na bočnej strane v úložnom priestore pre lyžicu rýpadla ----Hydraulika: * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákladnom vozidle nad 40 – max. 120 l/min.) ----Rozmery ložnej plochy: * Zadná ložná plocha: približne 6 780 x 2 520 mm (vrátane 860 mm rampy) * Ložná plocha nad otočným krúžkom: približne 2 990 x 2 520 mm ----Výška ložnej plochy: * S nákladom: približne 890 mm, +/- 20 mm ----Lakovanie: * Reflexné bočné a zadné olemovanie * Podvozok, otočný krúžok, rampy a výsuvné opory sú žiarovo pozinkované * Nápravy, očkové ťažné zariadenie, vzduchový zásobník a otočný krúžok sú natreté čiernou f

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: Hfjdpfx Aspk D I Aemhji * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) Hjdpfx Amowb Rakehofi ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: použitý, prvá registrácia: 06/2010, dĺžka ložného priestoru: 11 350 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 950 mm, - Riadená náprava - Diaľkové ovládanie - Hydraulické rampy - Horná nakladacia plocha 3500 mm - Dolná nakladacia plocha 7850 mm Hsdpfx Aex Dzn Uemhofi

Stav: použitý, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, Výbava: ABS, * Müller Mitteltal 3-nápravový príves pre abroll kontajnery * Typ TM 2 24 * Pre dva abroll kontajnery od 7 do 10 m³ * Zaistenie nákladu len dvoma reťazami na každý kontajner * Dvojitá pneumatika 265/70 R19,5 * Vzduchové odpruženie * Nápravy BPW Hfjdpfx Amsyx R Enshoi * Otočný oje pneumaticky sklopiteľné s pneumatickým odistením * 8 UVV kotviacich ôk 5t na upevnenie upínacích prvkov * 8 preklápateľných dorazov kontajnerov na bočné centrovanie * EBS * Technicky prípustná celková hmotnosť 27 000 kg

Stav: použitý, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2012, ďalšia kontrola (TÜV): 07/2028, Rok výroby: 2012, Interné číslo vozidla: G300402 Okamžite k dispozícii v našom areáli v Kaufungene Viac informácií na: * Golec Nutzfahrzeuge GmbH (nemecky, anglicky, bulharsky, rusky) Hjdpfx Amexy Ul Sohsfi * Viktoria Sologubova (poľsky, rusky, ukrajinsky, anglicky) Rok výroby: 2012 Pohotovostná hmotnosť návesu: 6 530 kg Betónovačkový náves LIEBHERR 10 m³ Chyby vyhradené Radi vezmeme vaše ojazdené vozidlo na protiúčet. Financovanie priamo u nás. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: použitý, maximálna hmotnosť nákladu: 15 100 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/1987, dĺžka ložného priestoru: 8 650 mm, šírka ložného priestoru: 2 480 mm, ? Mechanické rampy ? Nakladacia výška: cca 910 mm ? Držiak rezervného kolesa Hedpfx Aoyw Egwjmhjfi ? Ťažné oko 40 mm ? Maják ? Bubnová brzda ? Listové pružiny ? 1 x úložný box ? Dvojmontáž pneumatík ? Nápravy SAF Všetky údaje bez záruky / Medzipredaj vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Hjdpevy Tvtsfx Amhjfi Further information New: No

Stav: použitý, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2007, ďalšia kontrola (TÜV): 04/2027, celková šírka: 2 550 mm, celková výška: 1 500 mm, Výbava: ABS, * vzduchové odpruženie ----* rozmer pneumatiky: 285/70R22,5 * technická celková hmotnosť: 13 500 kg * vlastná hmotnosť: 2 550 kg * celková dĺžka: 6 600 mm * SP fälligkeit: 10.2026 ----číslo vozidla: 12150----Zmeny a predaj vyhradené---Reklama a rôzne nápisy boli digitálne odstránené.---Radi Vám poradíme a pomôžeme so všetkými formalitami, ktoré súvisia s kúpou vozidla. Stačí nám napísať Vaše želania a podnety a my sa o všetko postaráme. Okrem iného Vám za príplatok ponúkame nasledovné služby:----Výkup Vášho starého vozidlaTÜV/SP kontrolaKompletné exportné vybavenieSprostredkovanie financovaniaVyžiadanie vývozných značiekPreprava vozidielRegistrácia vozidielAsistencia pri odťahu a transporte vozidiel----?VAŠE VTS TÍM Hfedpfjzb Avijx Amhei

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS Hedpfsxt Rw Rjx Amhefi = Ďalšie informácie = Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.571

Stav: použitý, konfigurácia náprav: 2 nápravy, objem nakladacieho priestoru: 10 m³, celková dĺžka: 7 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2012, Aplikačný materiál: Betón Hrubá hmotnosť: 6.530 kg Hfsdpfx Amsx Utq Sehei Užitočné zaťaženie: 25.470 kg CELKOVÁ HMOTNOSŤ: 32.000 kg

Stav: použitý, maximálna hmotnosť nákladu: 18 050 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2010, šírka ložného priestoru: 2 520 mm, Výbava: ABS, ? Pružinové nájazdové rampy ? Držiak rezervného kolesa ? Na každej strane: 7 x upevňovacie oká ? Na každej strane: 4 x kapsy na stĺpiky ? Ťažné oko 50 mm ? Nakladacia výška: cca 910 mm ? Bubnová brzda ? ABS Hfedoy T Tvxopfx Amhji ? Listové pruženie ? EBS ? Dvojmontáž kolies Všetky údaje bez záruky / Predbežný predaj vyhradený.

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: Hfedpfx Ael Tld Iemhji * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), displayable in the truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel sheet * Spare wheel holder in basket design, installed on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bump stops * Foldable A-sign at rear ----Loading Platform: * Hot-dip galvanized main frame with elevated outer frame for guiding roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport: container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical drop-in stop angles at the front of the track * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plug-in with swinging stop * Weld bead as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; four lashing brackets in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * Four 8 t lashing eyes per side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on the sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross vehicle weight rating (GVWR): technically up to 20,000 kg * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: Hfedpfxel Tnwzs Amhji * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design Hjdpoyxbdbefx Amhsfi * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Hfsdoyfu Sdopfx Amhei Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8500 mm Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Hfjden Aw Hkspfx Amhoi Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Hsdpfxowmpbds Amhofi Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: Hfsdpfx Aex Nli Njmhoi * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized Hodjy Ngzyjpfx Amhjfi ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift Hjdpfx Asy Ngz Hsmhefi * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection Hsdpfsx Nlkaox Amhofi ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: Hfsdjx Nlkgepfx Amhoi * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026