Müller-Mitteltal 11,9 To., Verst. Strongwände, Kombi- Heckklappe kúpiť použité (23 036)

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes Iiodpfxsq Dyv Is Aa Usc * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning sign packages front & rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (mounted at rear) * Drawbar with 40 mm towing eye, height adjustable via tension spring & turnbuckle * 4 stake pockets per side (stakes not included) with integrated lashing options * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on main frame of bogie platform * 5 pairs UVV-certified swiveling and retractable lashing rings * Loadable in all directions and recessed into outer frame corners: 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not in rear taper) * Extension planks stored in a compartment under the loading area * Excavator arm rest over rear axle up to rear cross-member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings mounted on excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic ramp sideways shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to 140 l/min), dual-line hydraulics * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm sloped approach) * Loaded deck height approx. 860 mm +/- 30 mm compensating unit * Chassis, bogie, folding outriggers, drop-down rear supports, and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 19/2026

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp Iiodpfx Ajr Dpzxja Ujc * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 620 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when uncoupling the brakes) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 450 x 470 mm, side-mounted right * Mesh box, side-mounted, 1,000 x 500 x 500 mm * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection usable as advertising space * Rear underrun protection * Rear plastic impact protection buffers Ijdpfxjv Nulzo Aa Ueic * Rear hazardous materials sign * 15-pin electrical connector * LED tail lights * Roller conveyer length approx. 6,830 mm * Pneumatic 4-point container locking system * Mechanically adjustable stop angles (2 positions), front left and right on the roller tracks * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * Technical gross vehicle weight of up to 20,000 kg possible * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air tank, axles, turntable, and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. week 29 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profi ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Nouzové uvolnění pružinových válců * Bubnové brzdy ----Nápravy: * 4x 11 t Gigant nápravy ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením včetně RtR ventilu ----Tažná lišta: * Tažná lišta s tažným okem 50 mm a možností výškového nastavení ----Osvětlení / Elektrika: * EBS multi-napěťový systém s 12 & 24 V elektroinstalací * 15-pólová elektrická zástrčka * LED osvětlení 12 / 24 V * Odnímatelný LED maják vzadu * 2 LED couvací světlomety (spínané přes zpátečku) ----Všeobecné příslušenství: * Manometr - ukazatel tlaku pro určení zatížení (nápravy oddělené do 2 okruhů vzduchového odpružení) * Boční ochrana proti podjetí * Výkyvné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední plastové čtvrt-blatníky se zástěrkami * Zadní rovné galvanizované ocelové bočnice se zástěrkami * Reflexní obrysová páska po stranách i vzadu * Skříň na nářadí z pozinkovaného plechu, černě práškově lakovaná (cca 1000 mm široká, 600 mm hluboká, 300 mm vysoká) ----Ložná plocha: * Přední část před točnou cca 490 mm dlouhá se 45° rohy * Svařovaný ROBOT protiskluzový povrch na ocelové desce točny * Podlaha z tvrdého dřeva v pojezdové oblasti hlubokoložné plošiny ----Zajištění nákladu (La-Si balíček obsahuje): * Před nosníkem čela vlevo & vpravo vždy 1x 13,4 t UVV kotevní oko * Na každé straně 4 otvory v točně s kotevní silou 2 t * 1 pár kotevních ok (13,4 t) zavěšených vzadu vlevo & vpravo před zadním nosníkem * Na každé straně 4 páry UVV kotevních kroužků (10 t), nastavitelné a sklopné, zátěž ve všech směrech, zapuštěné v bočním rámu * Na každé straně 3 kapsy pro sloupky s možností upevnění 2 t ----Sada pro rozšíření: * Žárově pozinkovaná mechanická výklopná ramena pro celkovou šířku 3 m (ne však v zadním šikmém zakončení) * Držák prken pro rozšíření pod podvozkem vlevo v podélném směru ----Odkládací plocha pro rameno rypadla: * Odložení ramene rypadla přes zadní nápravu až k zadnímu nosníku cca 2100 mm dlouhé a cca 190 mm hluboké * Na každé straně 2 páry kotevních ok 6,4 t v odkládací ploše pro rameno rypadla ----RAMPY: * Hydraulicky ovládané jednodílné nájezdové rampy (cca 3000 x 720 mm), mechanicky nastavitelné do strany * Vnější prkna ramp z tvrdého dřeva * Ocelová konstrukce připravená pro šestipákové regulační ventily ----Výška nakládací hrany: * Ložná hrana nenaložená cca 950 mm +/- 20 mm ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Podvozek, točna, výklopná ramena, mechanické podpěry a nájezdové rampy žárově zinkované * Nápravy, vzdušníky, tažná lišta lakované v černém odstínu Iedpfol Tnu Ajx Aa Usic ----Informace: * Vozidlo má denní registraci 07/2024, kvůli chybějícímu systému kontroly tlaku v pneumatikách nebylo zatíženo ani použito * Nové vozidlo, záruka výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: Iodpfxol Tq Eue Aa Uoic * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 32/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, Gigant nápravy * Parabolické pružiny s vyrovnávacou jednotkou * Ťažná tyč výškovo nastaviteľná cca 300 mm * BPW podperná kľuka * Zadné mechanické podperné nohy Iijdpfx Ajwyhzvoa Ujc * Plastová skrinka na náradie vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva hrúbky 50 mm * Po jednom kotevnom oku 6,3 t v rohoch pri čelnej stene a zadnom priečniku, ďalšie 2 kotevné oká UVV 6,3 t po bokoch v vonkajšom ráme * Jednodielne mechanické rampy z roštového materiálu s pružinou na obsluhu jednou osobou cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažná tyč žiarovo zinkované * Nápravy, pružiny, vzduchové nádoby a predná podperná kľuka lakované v odtieni čiernej * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dostupné cca od 35. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) Iijdpex Nli Nsfx Aa Uoc * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon Iijdpfx Asl Tphrsa Ujc * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) Iiodpfxoykx Nkj Aa Usc * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 Iisdpfoylfvmsx Aa Uoc ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: Ijdpey Ngzysfx Aa Uoic * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18,0: * 2-in-1: Suitable for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm draw eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: Iiedjl Tq Nmspfx Aa Ujc * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Folding A-sign at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll containers * Steel sheet floor with wheel recesses in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking and mechanical plug-in stop angles at the front of the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the bulkhead support * 3 pairs of 10 t UVV lashing rings laterally in the outer frame * Each side: 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Chassis, bogie, locking parts and rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, full manufacturer’s warranty * Subject to errors and prior sale * Example images ----Delivery Time: * Available from approx. calendar week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: Iijdpfxjxptn Dj Aa Uec * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) Iiedpfx Aael Tihus Ujc ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: Iiedpfx Asl Tnvgoa Usc * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black Iedpfel Tpc Aex Aa Ujic ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Iisdpfxel Th Adj Aa Usc * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear Iedpjylfvgefx Aa Ujic * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection Iijdpfx Aaey Ngz He Ujc * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear Iedpfx Aajtplwfo Uoic * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ systém kontroly tlaku v pneumatikách * Nouzové odpojení pro válce s perovým akumulátorem * Bubnové brzdy * 3 x 11 t BPW Eco nápravy * Parabolické pružiny * Mechanické vyrovnání náprav vzadu * Boční ochrana proti podjetí * Otočné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední uzavřené plastové blatníky a rovné zadní pozinkované ocelové kryty s ochranou proti odstřikování * Konturovací páska po stranách a vzadu, reflexní * Výklopné víko (žárově zinkované) na skříňku na nářadí v platformě podvozku * Multinapěťová instalace * LED zadní světla * Výstražné světlo (odnímatelné) vzadu * Tažná oj s okem 40 mm a nastavitelnou výškou pomocí tažné pružiny a napínáku * 15-pólová elektrická zásuvka * Po stranách vždy 4 kapsy na kolíky (bez kolíků), současně možnost zajištění nákladu * Balíček zajištění nákladu (La-Si) obsahuje: 2 oka (6,4 t) vpředu vlevo a vpravo na hlavním rámu platformy, 5 párů UVV otočných a sklopných vázacích ok, zatížitelných ve všech směrech a zapuštěných do vnějšího rámu – v rozích 13,4 t, jinak 10 t * 6 párů mechanických sklopných ramen pro celkovou šířku 3 m (ne ve zkosení vzadu) * Rozšiřovací desky uložené uprostřed ložné plochy * Odkládací plocha pro rameno bagru přes zadní nápravu až k zadnímu nosníku, délka cca 2 100 mm (2 páry vázacích ok 6,4 t po stranách odkládací plochy) * Mechanicky jednodílné nájezdové rampy s pružinovým mechanismem (cca 3 000 x 720 mm) * Mechanicky posuvné boční rampy * Ložná plocha nad otočnicí: cca 1 960 x 2 520 mm * Ložná výška nenaloženého vozu cca 1 070 mm * Zadní ložná plocha: cca 6 500 x 2 520 mm * Ložná výška nenaloženého vozu cca 910 mm (včetně 860 mm nájezdového zkosení) * Podvozek, otočný rám, tažná oj a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové válce atd. lakované černou barvou * 235/75 R 17,5 dvoumontáž kol Ijdpfx Aasx Ipa No Usic * Pohotovostní hmotnost 5 900 kg * --technicky možné celkové povolené zatížení 30 000 kg-- * Vozidlo je žárově zinkované * Nové vozidlo s tovární zárukou * Změny a meziprodej vyhrazeny * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners Isdowh Hdxepfx Aa Ujic * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead Iijdpfjl Th Dfjx Aa Ujc * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) Iiedpfex Ipbgsx Aa Uec * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Isdopk D I Aepfx Aa Usic * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl