Müller-Mitteltal Ka-Ta Tandem 3 Seitenkipper Dreiseitenkipper kúpiť použité (49 528)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with in-cab display via EBS signal – no installation needed on the truck side * Warning panel packages front & rear * Side and rear reflective contour tape * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon rear * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel plate as well as basket-type spare wheel holder on the right side Bsdpfx Ajrczm Dsigsdg * Closed single plastic mudguards at front * Straight steel spray guards at rear, each with spray suppression * Side underrun protection * Extended offset cranked frame 500 mm forward * Turntable platform extended at the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lid * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and on the low-bed platform 60 mm conifer timber * Outer planks of loading ramps made of 50 mm bamboo wood * 4 pocket stakes each side (but no stakes included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and on each side 4 pairs of 10 t lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening boards stored on the left side in a storage compartment * Excavator arm rest above the rear axle up to the start of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side-shift of the ramps on sliding tube from the ramp shaft * Load area above the turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps and mechanical drop supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve Bdodjq Euakspfx Aigog ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: použitý, pohotovostná hmotnosť: 2 700 kg, maximálna hmotnosť nákladu: 7 300 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2007, dĺžka ložného priestoru: 5 020 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 400 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Lokalita vozidla: Bovenden, 2 nápravy, nápravy BPW, tandem, listové odpruženie, ABS (antiblokovací systém), upevňovacie oká, mechanické rampy, predná podpera, úložný box, výškovo nastaviteľné ojisko Nadstavba: Tandemový nízkozdvižný príves s mechanickými nájazdovými rampami, 2x BPW náprava, bubnové brzdy! Bdedpswvikqjfx Aigjg Nakladacia výška cca 930 mm! Dĺžka ramien cca 2600 mm! Údaje o príslušenstve bez záruky, zmena, medzipredaj a omyly vyhradené!

Stav: použitý, pohotovostná hmotnosť: 3 420 kg, maximálna hmotnosť nákladu: 7 080 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/1998, dĺžka ložného priestoru: 4 480 mm, šírka ložného priestoru: 2 220 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 245/70R19.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Umiestnenie vozidla: Bovenden, oceľová konštrukcia, listová odpruženie, 2 nápravy, tandemová náprava, ochrana v tvare písmena U, predná podpora, zadná podpora, výkyvné záklopky, ťažné zariadenie s nastaviteľnou výškou. Bsdsy U Ifdepfx Aigjdg Konštrukcia: trojstranný sklopný príves. Príves pochádza z mestského úradu! ÚDAJE O PRÍSLUŠENSTVE UVEDENÉ BEZ ZÁRUKY, zmeny, predaj a chyby vyhradené!

Stav: použitý, najazdené kilometre: 1 100 km, typ prevodu: iný, farba: žltá, celková hmotnosť: 32 000 kg, pohotovostná hmotnosť: 6 210 kg, maximálna hmotnosť nákladu: 25 790 kg, veľkosť pneumatiky: 425/65R22.5, prvá registrácia: 06/2012, zavesenie: vzduch, kabína vodiča: iný, Výbava: ABS, Vozidlo sa nachádza v Bovenden, 2-nápravové, vzduchové odpruženie, 1. náprava zdvíhateľná, ABS (protiblokovací systém), bočný ochranný zábradlie. Nadstavba: LIEBHERR miešačka betónu typ HTM 1004, cca 10 m³, 2× BPW nápravy, kotúčové brzdy, prvá náprava zdvíhateľná! Údaje o príslušenstve bez záruky, zmeny, predaj počas inzercie a omyly vyhradené! Bdsdpfxoi Rk Eps Aigog

Stav: použitý, pohotovostná hmotnosť: 2 400 kg, maximálna hmotnosť nákladu: 6 200 kg, celková hmotnosť: 8 600 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/1979, dĺžka ložného priestoru: 5 100 mm, šírka ložného priestoru: 2 320 mm, výška ložného priestoru: 1 900 mm, zavesenie: oceľ, veľkosť pneumatiky: 8,25R20, farba: biely, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 2 nápravy, tandem, listové pruženie, plachta, ochrana proti podbehnutiu, predná opora, kyvné klapky Nadstavba: plošinový príves s plachtou Reklama bola znečitateľnená! INFORMÁCIE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas ponuky a chyby vyhradené! Bodpfx Aisi Rp Iusgjdg

Stav: použitý, maximálna hmotnosť nákladu: 17 290 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2017, ďalšia kontrola (TÜV): 07/2026, dĺžka ložného priestoru: 8 900 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS * 5-komorové zadné svetlá * Oranžové výstražné majákové svetlo * Duomatik vzduchová prípojka * BPW-ECO nápravy ----Nadstavba: nízkopodlahový príves, pozinkovaný rám (1900+7000mm)/nakladacia výška cca 900mm, zadná časť skosená/nábehová výška cca 770mm, oceľovo-drevená podlaha, rozšíriteľná na 3 m, hydraulické nájazdové rampy (pozinkované) s protišmykovou vrstvou, aj hydraulicky posuvné do strán, upevňovacie oká Bdjdpfxeyulu Uo Aigeg Predaj len podnikateľom. PRI EXPORTE PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď imprint).

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Braking system: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit Bdodpfjx Hm Riox Aigsg ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal - no truck-side installation required - ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side on the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks at central locking bearings and 2 on the front wall * Steel pallet – 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal pipe reinforcement, no centre stanchions), fold-down with drop side spring lifter * Rear stanchions bolted * Combination steel wing door rear panel, 2-leaf, asymmetrically split, swivels and locks up to 270°, not fold-down, with additional pendulum frame for automatic rear wall opening during tipping, locking by galvanized rotating bar catch at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with wing door open * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 ton lashing point in each corner * 4 x 3 ton recessed lashing rings on each side in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting rail for access ramps * 1 pair aluminium access ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading surface, recessed in the chassis for the ramps ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Side panel paintwork in a RAL colour of choice (no special or metallic paintwork). Can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to error and prior sale * Sample images ----Delivery Time: * Available immediately from CW 29/2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control Bedpfx Aijykx Nkogjdg * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: Bdedpfx Aoy Ngz Hoigsg ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Bdsdpfx Ael Tnvgjigsg * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Brzdy: * Wabco EBS (elektronický brzdový systém) * Nouzové odpuštění pružinových válců * Bubnové brzdy ----Nápravy: * 2x 7t Gigant nápravy ----Odpružení: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oje / přípojný čep: * Tažná oje výškově stavitelná o 300 mm s přípojným čepem 40 mm / přírubou ----Elektroinstalace / Osvětlení: * 15pólová zástrčka * LED koncová světla 12/24 V * Monitorování tlaku v pneumatikách s možností zobrazení v nákladním voze přes signál EBS (není nutná instalace na vozidle) ----Obecné příslušenství: * Jost mechanický opěrný naviják vpředu * Vzadu 2 mechanické sklopné stabilizační nohy * Plastová sada nářadí cca 750 x 350 x 300 mm vpředu na pravé straně podvozku * Šroubovaný podjezdový ochranný rám Bdodpfjx Hm Rcjx Aigog * Plastové čtvrtkové blatníky ----Sklápěcí nástavba: * Síťové háky v ložiskách centrálního uzamčení a 2 kusy na čelní stěně * Ocelová paletová 3stranná sklápěcí nástavba s vyztuženými Strong bočnicemi (spojité horní bočnice s vnitřním trubkovým vyztužením, bez středových sloupků, sklopné s plynovým tlumičem) * Šroubované zadní sloupky * Kombinovaná ocelová křídlová zadní stěna, dvoukřídlová, asymetricky dělená, otočná o 270° a aretovatelná (nelze sklopit), s přídavným kyvným rámem pro automatické otevření zadní stěny při sklápění, zamykání přes pozinkovaný otočný uzávěr a centrální zamykání, deaktivace automatické funkce zadní stěny při sklápění dozadu s otevřenými křídlovými dveřmi * 4 mm plechová podlaha z jemnozrné oceli ----Zajištění nákladu: * V rozích vždy 1x 5t upevňovací oko * Po stranách vždy 4x 3t zapuštěných upevňovacích ok v vnějším rámu ----Podvozek: * Podvozek z jemnozrné oceli ----Rámpy: * Vzadumountovaná kolejnice pro najížděcí rampy * 1 pár hliníkových najížděcích ramp cca 3570 x 410 mm (nosnost 10 t/pár) vhodné pro gumová i pásová vozidla * Uzamykatelný úložný prostor pod ložnou plochou v rámu podvozku pro rampy ----Pneumatiky: * Pneumatiky 358/55 R 19,5 ----Lakování: * Tažná oje, podjezdový ochranný rám, zadní sloupek, zadní sklopné nohy žárově zinkované * Nápravy, pružiny, vzduchojemy a opěrný naviják lakovány černě * Bočnice lakovány v požadovaném odstínu RAL (bez speciálního nebo metalického laku), barvu lze změnit do cca 6 týdnů před dokončením ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu * Změny a omyly vyhrazeny, mezitímní prodej možný * Ilustrační fotografie ----Dodací lhůta: * K dispozici ihned od 29. týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks Bdjdpfey Ngzyox Aigog * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) Bedepk D I Aopfx Aigjdg ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve Bodpoykx Nqofx Aigjdg ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2010, 3-nápravový nízkozdvižný príves, prejazdný zozadu. Povolená celková hmotnosť 30 000 kg, užitočné zaťaženie 22 700 kg. Nakladacia plocha 8 900 mm (7 000 + 1 900) x 2 550 mm, výstražný balík pre nadrozmer, 12 kotviacich ôk a 8 vreciek na stĺpiky s možnosťou súčasného kotvenia, 6 prepraviek na náradie. Dvojdielne hydraulické rampy cca 2 100 + 2 000 x 800 mm s gumovým povrchom, hydraulická zadná podpera. Nápravy BPW, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75 R 17.5. Kovaný oje, otočné ťažné oko 40+50 mm. 2-vedenie pneumatík (duomatic), 2-vedenie hydrauliky, 24 voltov. Výška nakladania prázdneho prívesu cca 910 mm. Oranžový náter. STK platná do 03-2027. = Ďalšie informácie = Rozmer pneumatiky: 235-75R17.5 Bsdpoy Evvlefx Aigedg Pruženie: parabolické Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 22 700 kg Celková hmotnosť: 30 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Plateau: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové odblokovanie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 5,5 t BPW nápravy ----Zavesenie: * Vzduchové odpruženie s možnosťou zdvíhania a znižovania ----Ťažné zariadenie / Prírubové ťažné oko: * Výškovo nastaviteľné ťažné zariadenie do 300 mm * Ťažné zariadenie skrátené o cca 200 mm na cca 1 800 mm (tým pádom B-rozmer cca 8 080 mm) * Prírubové ťažné oko 40 mm ---- Elektrika / Osvetlenie: * 15-kolíková elektrická zásuvka * LED svetelná sústava 12 / 24 V * 2 prídavné LED cúvacie svetlá vzadu (spínané spätným chodom) * 1 LED maják (odnímateľný vrátane držiaka) vzadu * RDÜ (monitorovanie tlaku v pneumatikách) ----Všeobecné príslušenstvo: * Mechanicky nastaviteľné 3 m výstražné tabule vpredu a vzadu * Podperná kľuka vpredu * Vzadu vyklápacie podpery * Plastové náradie skrine cca 750 x 350 x 300 mm po oboch stranách vľavo a vpravo * Bočný nárazník * Podvozkový chránič * Plastové štvrtinové blatníky ----Ložná plocha: * 400 mm vysoká skrutkovaná predná stena * 50 mm podlaha z ihličnatého dreva * 2 páry kontajnerových zámkov (vysúvateľné na 3 m vonkajšiu šírku kontajnera) s možnosťou zaistenia, rozmer zámku zasunuté podľa ISO – DIN 15190 = 2 259 mm, vysunuté zámky = 2 819 mm (tento rozmer nie je podľa DIN) pri celkovej vonkajšej šírke 3 000 mm ----Zabezpečenie nákladu: * Dierovaný vonkajší rám ohnutý cca 45 stupňov s 2 t uväzovacou silou každých 480 mm * Možnosť inštalácie 3 t sklopných uväzovacích ôk každých 600 mm – na každej strane zabudovaných 5 x 3 t UVV-uviazacích ôk * V rohoch vpredu a vzadu po 1 x 6,3 t uväzovací bod (vpredu priamo za kontajnerovými zámkami v podlahe, vzadu v koncovej priečke) * Vo prednej stene a koncovej priečke rôzne otvory pre 1,2 t možnosti uväzovania ----Rampy: * 1 pár hliníkových zasúvacích rámp cca 3 310 x 410 mm (nosnosť 8 t / pár), vhodných pre pneumatikové a pásové vozidlá * Vzadu pod ložnou plochou v podvozku zabudovaný úložný priestor ----Lakovanie: * ---Podvozok, ťažné zariadenie, predná stena, podvozkový chránič a zadné výstuže žiarovo pozinkované--- * Nápravy, vzduchové zásobníky, predná podperná kľuka a prírubové ťažné oko lakované v čiernej farbe ----Info: * Nové vozidlo so zárukou výrobcu * Chyby a medzi-predaj vyhradené * Ilustračné fotografie ----Dodacia lehota: * Dodanie od cca 38. kalendárneho týždňa 2026 Bdsdpfx Aisy U A Eljgjg

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Platform: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) Bjdpfxey U A Efj Aigedg * 1 removable LED beacon (including holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General attachments: * Mechanically adjustable 3-metre warning sign kits front and rear * Support winch at the front * External foldable support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on left & right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading area: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container exterior width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - each side fitted with 5 x 3 t UVV lashing rings - * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wood floor as well as rear in the rear cross member) * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, rear underrun protection, as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch, and flange towing eye painted in a black tone ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering mechanism ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED beacon (removable incl. bracket) at the rear * TPMS (tire pressure monitoring system) ----General attachments: * Mechanically adjustable 3 m warning panel sets, front and rear * Landing leg at the front * Externally mounted folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each installed left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN), with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible - 5 x 3 t UVV lashing rings each side installed * 1 x 6.3 t lashing ring in each of the front and rear corners (front directly behind the container locks in the wooden floor, and rear in the end crossmember) * Various holes in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (10 t load capacity / pair), suitable for rubber-tyred and tracked vehicles * Rear loading compartment integrated under the platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg and flange drawbar eye painted in black shade Bedpfxsv D Tbds Aigsdg ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 39/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: Bedpfxel Th Nne Aigodg * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection Bdsdsl Th Evepfx Aigsg * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders Bjdpfx Aietpta Dogedg * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps Bdedpfx Aoyxbdbjigjg * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: Produktpalette, pohotovostná hmotnosť: 3 650 kg, maximálna hmotnosť nákladu: 9 850 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 450 mm, celková dĺžka: 6 900 mm, celková šírka: 2 550 mm, celková výška: 1 680 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70 R19,5", stav pneumatík: 100 percento, Rok výroby: 2026, Prispôsobené transportné riešenie. Konfigurujte si svoje vozidlo Fliegl podľa vašich potrieb. Zobrazené vozidlo slúži ako príklad. Výroba a vybavenie sa vykonávajú individuálne podľa požiadaviek zákazníka. #Podvozok, centrálna náprava, sklopný príves Oceľová zváraná konštrukcia, priebežná sklopná os na zadnej strane s guľovým ložiskom 80 mm. Predná oporná noha s prevodom. Sklopná zadná opora. 2 kliny s držiakom. Ochrana proti podjazdu, oceľová. Ochranné klapky vzadu, po celej šírke. Štvrtinové blatníky. Uzamykateľný úložný priestor pre nájazdové rampy pod ložnou plochou. 1 plastová skrinka na náradie, s vloženou priehradkou, rozmery: š 620 / v 360 / h 440 mm, uzamykateľná závesným zámkom. Upozornenie: Bočnica sa v sklopenom stave dotýka úložnej skrinky. Uzamykateľný úložný priestor pre nájazdové rampy pod ložnou plochou. Konštrukcia pre príves s centrálnou nápravou. Ťažné oje s testovanou 40 mm ťažnou spojkou. Ťažné oje s nastaviteľnou výškou pomocou vretienka, max. rozsah nastavenia 300 mm. #Nápravy a odpruženie Bubnové brzdy SAF. „Nápravy/podvozok merané laserom“ – zníženie opotrebenia pneumatík a spotreby paliva. Listová odpruženie s údržbovo nenáročným oceľovo-gumovým uchytením a mechanickým vyrovnávaním zaťaženia nápravy (kyvadlové vyrovnávanie). #Kolesá a pneumatiky 285 / 70 R 19,5" podľa voľby výrobcu. Oceľové disky, továrenská strieborná farba. #Brzdový systém Dvojokruhová pneumatická brzdová sústava. Brzda s pružinovým akumulátorom. 2 výmenné spojky vpredu, s pripojovacími hadicami k ťahaču. ABS a ALB, so spojkou ABS vpredu a pripojovacím káblom. Pozor: Prívesné vozidlo smú ťahať iba ťahače, ktoré zaručujú účinnosť ABS! #Elektrická inštalácia 24 V, viackomorové svetlá, bočné žlté LED osvetlenie. 2 biele pozičné svetlá vpredu. 2 bielo/červené obrysové svetlá vzadu. 2 x 7-pólové výmenné konektory vpredu, s pripojovacím káblom. #Hydraulika Trojstranný vyklápací mechanizmus, hydraulický viacpiestový valec s obmedzovačom zdvihu a bezpečnostným lanom. Valec s nízkym tlakom, max. 170 barov, bez škrtiaceho ventilu. Ak je to potrebné, je možné ho namontovať na ťahači. Ovládanie hydraulicky pomocou pomocného pohonu ťahača. Hydraulické pripojenie so spojkou SVK NW 10/3, vrátane pripojovacej hadice. #Vyklápacia plošina Stabilná vyklápacia plošina so 4 mm oceľovou podlahou, bočnice z ocele, bočné steny priebežné, sklopné a uložené na kyvadlovom mechanizme so stredovým zamykaním v dolnej časti. Zadné rohy vpredu zasúvateľné. Zadná stena sklopná a uložená na kyvadlovom mechanizme so stredovým zamykaním v dolnej časti. Dĺžka ložnej plochy cca 5 000 mm, bočné steny so 6 pántmi v dolnej časti. Pružiny pre stiahnutie bočníc. Šírka ložnej plochy 2420 mm. 5 párov upevňovacích ok ťažnej sily 5 ton v podlahe. #Prevádzkové pokyny Uvedená celková hmotnosť je technicky možná, v závislosti od nákladu môže byť celková hmotnosť za dodržania prípustných hmotností náprav/oporných nôh a ťažného zariadenia nedosiahnutá. #Krajina registrácie/Tabuľky Krajina registrácie: Nemecko. So schválením Dekra a posudkom (podľa §13 EG - FGV). Nonstop servisná linka. Pripravené pre jednostranný držiak poznávacej značky. Kontúrové označenie reflexnou páskou podľa ECE R 048, bočne biela a vzadu červená. #Lakovanie Rám: žiarovo zinokovaný vrátane pasivácie. „15-ročná záruka proti prekorózii“. Bočnica/plato: lakované vo farbe podľa želania. Prispôsobené transportné riešenie. Bdsdpozd D Scsfx Aigjg

Stav: použitý, najazdené kilometre: 100 000 km, výkon: 81 kW (110,13 k), prvá registrácia: 02/2015, typ paliva: nafta, celková hmotnosť: 3 200 kg, ďalšia kontrola (TÜV): 10/2027, farba: oranžová, typ prevodu: mechanický, emisná trieda: Euro 5, počet sedadiel: 7, dĺžka ložného priestoru: 2 800 mm, šírka ložného priestoru: 2 050 mm, Rok výroby: 2014, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, nezávislé kúrenie, sadzový filter, INTERNÉ REGISTRAČNÉ ČÍSLO: M633----CITROEN JUMPER Dodávka s plachtovou nadstavbou TROJSTRANNÝ SKLOPNÝ VALNÍK----KM: 100 000, PRAVIDELNE SERVOVOVANÉ----VÝBORNÝ STAV, PNEUMATIKY M+S----* ASISTENT PRI ŠTARTOVANÍ V KOPEC * KLÍMA ----CELKOVÁ HMOTNOSŤ: 3500 KG NEZAŤAŽENÁ HMOTNOSŤ: 2575 KG NOSNOSŤ: 925 KG----Dodávka s plachtovou nadstavbou----7 SEDADÁL----VYHRIEVANÉ SEDADLÁ----NEZÁVISLÉ VYHRIEVANIE----PRÍDAVNÉ VYHRIEVANIE OD FIRMY WEBASTO----TAŽNÉ ZARIADENIE ŤAŽNÉ ZARIADENIE S MAXIMÁLNOU HMOTNOSŤOU 3000 KG----DLHŠIA VERZIA----ODRAŽNÉ PRVKY----SVETELNÁ LIŠTA----ROZMERY LOŽNEJ PLOCHY: DĹŽKA: cca 2,80 METRA ŠÍRKA: cca 2,05 METRA----* AUX * CD * RÁDIO * PALUBNÝ POČÍTAČ * OPERADLO RÚK * LUMBÁLNA OPORA * ELEKTRICKÉ OTVÁRANIE OKIEN * ELEKTRICKÉ VONKAJŠIE ZRKADLÁ * NASTAVITEĽNÝ STĺPIK VOLANTU * SEDADLO SPOLUJAZDCA, KTORÉ SA DÁ SKLAPIŤ NA STÔL * VYHRIEVANÉ ZADNÉ SKLO * PREDELNÁ STENA * 6X UCHYTENIE * 2X 12V ZÁSUVKA ----ŠPECIÁLNA VÝBAVA: * Airbag na strane spolujazdca * Vonkajšie spätné zrkadlá, elektricky nastaviteľné a vyhrievané * Vonkajšie spätné zrkadlo, elektricky nastaviteľné, vpravo * Dlhšie vonkajšie spätné zrkadlo pre šírku vozidla 2200 mm * Strešný nosič, priehradka na streche vpredu * Zadné odpruženie, zosilnené * Predpríprava na rádio * 4 reproduktory * Sedadlá v kabíne vodiča: vyhrievané sedadlo vodiča * Prídavné vykurovanie (Webasto) Bdodpfxsy N Ilgo Aigjg Ďalšia výbava: * Airbag na strane vodiča * Vonkajšie spätné zrkadlá so širokouhlým výhľadom * Blinkre integrované vo vonkajších spätných zrkadlách, farebné * Systém kontroly trakcie (ASR) * Karoséria/Nadstavba: štandardná plachtová nadstavba * Palivová nádrž: 90 litrov * Stĺpik volantu (volant) nastaviteľný v dĺžke * Motor 2,2 litra - 81 kW HDi FAP KAT * Rázvor 3000 mm * Rezervná pneumatika v jazdnej sade * Nízke emisie podľa emisnej normy Euro 5 * Bočné ochranné lišty * Poťah/čalúnenie sedadiel: látka * Sedadlá v kabíne vodiča: dvojité sedadlo spolujazdca * Sedadlá v kabíne vodiča: sedadlo vodiča nastaviteľné v dĺžke * Sedadlá v kabíne vodiča: sedadlo vodiča s bedrovej opierkou * Max. celková hmotnosť 3,30 t ----++ Exkluzívna akcia v Autohause Mat GmbH: Až 1 000 € bonus za pripočítanie vášho starého vozidla? Vaša výhoda pri zmene vozidla! (platí iba pre úžitkové vozidlá) ++ Kontaktujte nás priamo prostredníctvom WhatsApp na čísle: Prečo Autohaus Mat GmbH? 1. Atraktívna ponuka za vaše staré vozidlo: Zaisťujeme rýchle a férové vybavenie. Vďaka nášmu bonusu za pripočítanie vášho starého vozidla maximalizujete hodnotu vášho vozidla a získate výhodu pri kúpe nového modelu. 2. Individuálne financovacie riešenia: Chcete financovať svoje nové vozidlo? Ponúkame prispôsobené financovanie, ktoré zodpovedá vašim potrebám: * S alebo bez akontácie * Flexibilné lehoty splácania * Najlepšie podmienky 3. Osobný zákaznícky servis: Náš skúsený tím vás bude sprevádzať od prvej konzultácie až po odovzdanie vozidla. 4. Naše ďalšie služby: Okrem kúpy vozidla ponúkame exkluzívne služby pre plynulý priebeh: * Predaj vozidiel po celom svete: Poskytujeme podporu pri kúpe a vývoze, nech sa nachádzate kdekoľvek. * Prepravné evidenčné číslo: Zabezpečujeme exportné alebo dočasné evidenčné číslo pre prepravu. * Colné odbavenie: Postaráme sa o všetky formality pre vývoz do zahraničia. * Dodanie vášho vozidla: Bezpečné a včasné dodanie priamo k vám. Dôležité: Všetky ponuky sú závislé od dostupnosti. Popis vozidla slúži ako orientačná pomôcka, právne záväzné sú iba údaje v kúpnej zmluve alebo v potvrdení objednávky. Pre vozidl