Müller-Mitteltal Úžitkové Vozidlo kúpiť použité (50 721)

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system Fedjl Thyxepfx Acpeph ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Nouzové uvolnění pro pružinové válce ----Náprava: * BPW náprava ----Odpružení: Fsdpfxeu I Iqls Acpoph * Parabolické pružiny ----Tažná tyč / Přípojný čep: * Tažná tyč s 40 mm šroubovacím přípojným okem (výškově nastavitelná mm) ----Elektrika / Osvětlení: * 15-pólová elektrická zástrčka * LED osvětlení * Blikající LED boční obrysová světla * RDÜ sledování tlaku v pneumatikách ----Obecné příslušenství: * Opěrná klika vpředu * Pružinově podporované čtyřhranné podpěry vzadu s patkou, bezpečnostní kolíky pro různé výšky podpěr * Uzavřené blatníky z ocelového plechu s ochrannou clonou proti odstřikování * Uzavřený boční ochranný kryt použitelný jako reklamní plocha * Plastová skříňka na nářadí s podložkou (horizontální instalace) cca 500 x 350 x 400 mm ----Nástavba: * Otočná navijáková nástavba, volná šířka mezi rameny navijáku 1700 mm, se zajišťovacím uzávěrem na koncích nosných ramen a centrálním drápovým zámkem pro blokaci nástavby s podvozkem * Motor-hydraulický pohon navijáku s olejovým motorem * Ventily a posuvné hnací kladky s pryžovým povrchem * Hydraulický regulátor rychlosti a brzda pro pohon navijáku * Ocelová osa navijáku o průměru 76 mm s centrováním a otočnými konci * 1 pár centrovacích kuželů z polyamidu se stupňovitým provedením ----Podvozek: * Podvozek z vysoce torzně tuhých čtyřhranných trubek a příčných nosníků ----Čerpadlová jednotka: * Hydraulická čerpadlová jednotka s dieselovým motorem * Palivová nádrž a ruční startér * 6,5 HP se zubovým čerpadlem (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Pohotovostní hmotnost: * Pohotovostní hmotnost 2 690 kg ----Lakování: * Vozidlo je žárově zinkováno ----Informace: * Nové vozidlo s plnou zárukou výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 14 650 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (elektroniczny system hamulcowy) * RDÜ monitorowanie ciśnienia w oponach * urządzenie awaryjnego zwalniania siłowników sprężynowych * hamulce tarczowe * złącze hamulcowe Duomatic * 2 x 10-tonowe osie SAF * zawieszenie pneumatyczne z automatycznym obniżaniem przy rozłączaniu hamulców * dyszel o długości 2300 mm z oczkiem holowniczym 40 mm oraz regulacją wysokości poprzez sprężynę naciągową i wrzeciono * plastikowa skrzynka narzędziowa po prawej stronie, zamknięte plastikowe błotniki * boczna zabudowa ochronna pełniąca funkcję powierzchni reklamowej * zabezpieczenie przeciwnajazdowe z dwoma odbojnikami * składana tablica A z tyłu do wywozu odpadów * tylne lampy LED ze zintegrowanym daszkiem ochronnym * 2 x 7-pinowe gniazda zasilania * rama podwozia ocynkowana ogniowo (bez zbiorników powietrza, osi, dyszla itp.) Fpjdpfx Acjl Tpy Hjpeh * długość toru rolkowego ok. 6.950 mm * kontener rolkowy napinany pneumatycznym, czterostronnym ryglem * z przodu dwa wtykane ograniczniki kontenera z dwiema dodatkowymi pozycjami * wysokość jazdy w stanie niezaładowanym ok. 1.165 mm * --Dopuszczalna masa całkowita technicznie możliwa: 20.000 kg-- * odpowiedni dla długości kontenerów 5.000 ? 7.000 mm * pojazd nowy z gwarancją producenta * zastrzeżenie pomyłek i sprzedaży pośredniej * dostępny od ręki w Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18,0: * 2-in-1: Suitable for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm draw eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: Fpsdpfx Acol Tq Nmepjh * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Folding A-sign at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll containers * Steel sheet floor with wheel recesses in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking and mechanical plug-in stop angles at the front of the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the bulkhead support * 3 pairs of 10 t UVV lashing rings laterally in the outer frame * Each side: 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Chassis, bogie, locking parts and rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, full manufacturer’s warranty * Subject to errors and prior sale * Example images ----Delivery Time: * Available from approx. calendar week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 18 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 24,0: ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové odjištění pružinových válců * Bubnové brzdy ----Odpružení: * Vzduchové odpružení s manuálním snížením vzadu ----Nápravy: * 3x 11 t Gigant nápravy * Střední náprava zvedatelná Fpodpfstplv Tsx Acpoh ----Oje: * Pneumaticky sklopné tažné oje, délka 2 100 mm, s tažným okem 40 mm a výškově stavitelným zařízením ----Elektrika / Osvětlení: * LED zadní světla * 15pólová elektrická zásuvka * Systém sledování tlaku v pneumatikách (TPMS) ----Obecné montované díly: * Skříň na nářadí z práškově lakovaného ocelového plechu (Š: 1000 mm x V: 300 mm x H: 450 mm) * Úložný box na síťky pro kontejnery z pozinkovaného ocelového plechu (Š: 960 mm x V: 300 mm x H: 450 mm) * Boční ochrana proti podjetí * Plastové částečné blatníky se zástěrkami * Plastové zadní nárazníkové dorazy * Mechanické zadní opěrné nohy ----Kontejner / Nízkoložná plošina: * Žárově zinkovaný hlavní rám se zvýšeným bočním rámem (cca 25 mm vyšší) pro vedení válečkových kontejnerů * Ocelová podlaha s prohlubněmi pro válce v oblasti podvozku * Při přepravě hákových kontejnerů možná délka 5 500 – 7 000 mm * Pneumatické 4násobné klešťové zajištění a mechanické nasouvací dorazy v přední části dráhy * Certifikát pro zabezpečení nákladu dle DIN 30722-1 * Možnost přepravy až 2 výměnných kontejnerů s max. objemem 10 m³/ * 8 přestavitelných dorazů pro boční centrování, přední čtyři se zavěšenými kyvnými dorazy ----Zajištění nákladu: * 3 páry 10 t UVV upínacích ok pro zavěšení upínacích prvků pro tvarové a silové zajištění van * Po 4 upínacích třmenů v provedení jetelového listu (bočně) a 1 pár 13,4 t UVV upínacích ok v přední části * Certifikát zabezpečení nákladu dle DIN EN 12195-1, DIN EN 12640, DIN EN 12642 a VDI 2700 ----RAMPY: * Svarový pás jako protiskluzová úprava v oblasti šikmé nájezdové dráhy * 1 pár hliníkových nájezdových ramp (16 t / pár), rozměr 2 800 x 400 mm, vhodné pro vozidla s gumovými pneumatikami i pásová vozidla (uzamykatelný úložný box přístupný zezadu) ----Pneumatiky: * Pneumatiky: 235/75 R17,5 ----Výška pod vozidlem: * Naložená jízdní výška cca 1 003 mm ----Užitečné zatížení: * Užitečná hmotnost 18 900 kg ----Lakování: * Postranní a zadní reflexní konturová páska * Nápravy, točna, tažné oje a vzduchojem lakovány černou barvou * Hlavní rám žárově zinkovaný ----Informace: * Technicky možné celkové povolené zatížení 27 000 kg * Nové vozidlo bez první registrace, se zárukou výrobce * Změny, chyby a mezitímní prodej vyhrazeny ----Dodací lhůta: * Dostupné cca od 47. týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display Fjdpfxeykx Nke Acpoph * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point Fsdpfx Aceylfvmopeph ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles Fodpfx Aoy Ngzyscpjph ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Nouzovné odjištění pružinových válců ----Náprava: * BPW náprava ----Pérování: * Parabolické pružiny ----Oje / Tažné oko: * Tažné oje se šroubovacím tažným okem Ø 40 mm (výškově nastavitelná ... mm) ----Elektrika / Osvětlení: * 15-pólová elektrická zásuvka * LED osvětlení * LED blikače bočních obrysových světel * RDÜ - monitorování tlaku v pneumatikách ----Všeobecné přídavné díly: * Opěrná klika vpředu * Pružinově podporované čtvercové opěrné nohy vzadu s základovou deskou a bezpečnostními čepy pro různé výšky * Uzavřené blatníky z ocelového plechu se zástěrkami * Uzavřený boční nárazník využitelný jako reklamní plocha * Plastová skříňka na nářadí s podlahovou vložkou (vleže montovaná), cca 500 x 350 x 400 mm ----Nástavba: * Výkyvná konstrukce pro kabelový buben, světlá šířka mezi rameny 1 700 mm, uzavírání proti pohybu bubnu na koncích ramen a aretace konstrukce s podvozkem pomocí středové západky * Motorhydraulický pohon bubnu s olejovým motorem * Ventily a posuvné hnací kladky s gumovým povrchem Fpsdpsu I Iq Eefx Acpoh * Hydraulický regulátor rychlosti a brzda pohonu bubnu * Hřídel pro buben z oceli průměru 76 mm s centrováním a otočnými konci * 1 pár středících kuželů z polyamidu s odstupňovaným průměrem ----Podvozek: * Podvozek z torzně tuhých čtvercových trubek a příčných nosníků ----Čerpací agregát: * Hydraulické čerpadlo s dieselovým motorem * Palivová nádrž a ruční startér * 6,5 HP se zubovým čerpadlem (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Provozní hmotnost: * Provozní hmotnost 2 690 kg ----Lakování: * Vozidlo je žárově zinkováno ----Informace: * Nové vozidlo s plnou tovární zárukou * Změny a omyly vyhrazeny, možnost mezitímního prodeje ----Doba dodání: * Okamžitě k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 8 600 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring actuators * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Towing Eye: * Hot-dip galvanized drawbar, height-adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * At the rear, 2 mechanical hot-dip galvanized drop-down supports ----Tipping platform: * Net hooks on the sides and rear in the central locking bearings, as well as 3 units on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides without central stanchion, foldable with drop-side spring assist * Rear gate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor * Rear guide rail for loading ramps ----Load securing: * Each corner with 1 x 5 t retractable and foldable lashing ring * Additionally, each side with 4 x 3 t recessed and foldable lashing rings in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 Fpsdpfxsv Dz N Ao Acpeh ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Side board painted in RAL 9010 pure white * Painting of the side walls in RAL color shade available at extra cost * Floor and front wall hot-dip galvanized ----Info: * Reinforced bodywork with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange towing eye: Approx. 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical hot-dip galvanized folding supports at rear * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, fitted on the right-hand side * Plastic quarter mudguards * Two-step access on the left-hand side as climbing aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel pallet - 3-way tipper construction * Continuous side walls at the top with internal pipe reinforcement – without central stanchions – foldable with drop side spring assist * Tailgate foldable and swinging with manual central locking * Rear bulkhead bolted and hot-dip galvanized * 4 mm fine-grain steel floor plate * Net hooks, mounting rail at rear for loading ramps * Preparation for retrofitting side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner with 1 x 5 t lashing point, each side with 4 x 3 t lashing rings recessed in outer frame ----ALU loading ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable compartment at the rear underneath the loading platform, integrated in the chassis ----Tires: * Tyres 385/55 R 22.5 ----Painting: * Axles, springs, air tanks, and landing gear painted in black shade * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side panels painted in RAL 9010 pure white * Painting of side walls in other RAL colors available at additional cost ----Information: * Body reinforced with load securing certificate according to EN 12642 XL Fpodpjl Th A Esfx Acpjh * New vehicle without initial registration and manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 29/2026

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): Fpedpexptn Djfx Acpeh * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axles: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load Fedpfx Ajx Dp Amecpoph ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24 V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24 V electrics * Extended connection lines for agricultural and forestry vehicles * Power supply to remote control 12+24 V via tail light ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable tow pin coupling (usable only when underrun protection is retracted) * Closed plastic single-splashguard fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tensile force * Hook height 1,570 mm * Hooklift control via remote control * Remote control with rapid function for tipping off, but not for lifting * Emergency stop switches on both the left and right sides * Container supports with 4 rests each side plus 1 roller each at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves. * Monitoring system for underrun protection—ensures retraction during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in a shade of black * Palfinger hooklift painted black/yellow ----Info: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Cargo length: 5,500 mm * Cargo width: 2,300 mm * Cargo height: 1,000 mm Info: * Mounting brackets for hook systems according to...

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty Fjdpfxjl Tihue Acpeph * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: Fedol Tnvgspfx Acpjph * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 8 670 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable (300 mm), hot-dip galvanized drawbar with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Tool box made of galvanized sheet steel, mounted on the right-hand side * Bolted underride guard Fpsdpfxeq Hg Dxe Acpoh * Plastic quarter mudguards * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipper Platform: * Lashing hooks on the sides and rear in the central locking mounts plus 3 pieces externally on the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls without central stanchion, foldable with drop-side spring lifts * Rear tailgate foldable or swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load Securing: * One 5 t recessed, foldable lashing ring in each corner * Four 3 t recessed, foldable lashing rings on each side, integrated into the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area in the chassis at the rear ----Tyres: * 235/75 R 17.5 tyres ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop-sides painted RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release mechanism for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Towing Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable, mm) ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support jack at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm ----Superstructure: * Swivel cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the carrier arms as well as a centre-mounted claw lock for securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-lined drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft with 76 mm diameter, with centering and rotatable ends * 1 pair of polyamide centering cones, stepped in increments ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump Unit: * Hydraulic pump unit with Loncin petrol engine including hand and electric starter * Fuel tank and hand starter * 13 hp with gear pump (150 bar) ----Tires: Fpsdpfxeu I Iqfj Acpoh * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: Fpjdpfol Tpc Aox Acpjh * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 360 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 14.4: ----Brzda: * Elektronický brzdový systém EBS * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * Nápravy Gigant ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením ----Tažná oj / tažné oko s přírubou: * Tažná oj výškově nastavitelná o 300 mm * 40mm tažné oko s přírubou ----Elektroinstalace / Osvětlení: * RDÜ (monitorování tlaku v pneumatikách s možností zobrazování v nákladním vozidle přes signál EBS bez instalace na straně nákladního vozidla) * LED světelná soustava * 15-pólová el. přípojka ----Obecné přídavné díly: * Přední podpěrná noha Jost * Zadní sklopné podpěrné nohy, žárově zinkované, namontované zvenčí * Plastová schránka na nářadí vpředu vpravo zvenčí na čelní stěně * Boční ochrana proti podjetí * Plastové čtvrtkové blatníky ----Nízkoložná plocha: * Podlaha z jehličnatého dřeva tl. 50 mm * Příprava pro dodatečnou montáž uzamykacích zařízení pro 20" kontejnery vpředu i vzadu * Šroubovaná čelní stěna z hladkého plechu * Sklopné bočnice z trapézového ocelového plechu s plynovou vzpěrou * Šroubované zadní sloupky, žárově zinkované ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° s upínací silou 2 t každých 480 mm * Možnost instalace sklopných úchytných ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu vždy 1x úchyt 6,3 t * V čelním a koncovém nosníku různé otvory pro úchyty 1,2 t ----RAMPY: * 1 pár nájezdových hliníkových ramp cca 3 310 x 400 mm (nosnost 8 t / pár), vhodné pro pneumatiková i pásová vozidla, uložené vzadu pod ložnou plochou v rámu ----Lakování: Fjdpfjndpn Ssx Acpsph * Podvozek, tažná oj, čelní stěna a zadní stěna - žárově zinkováno * Celé vozidlo žárově zinkováno ----Informace: * Nové vozidlo s tovární zárukou * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange-type towing eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange-type towing eye ----Electrics / Lighting: * RDÜ tire monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cable for forestry and agricultural towing vehicles * LED rear lights ----General attachments: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear, at the central locking mounts, as well as 2 on the front wall * Steel pallet three-way tipper body (continuous side walls – no center posts – foldable with drop side spring assist; tailgate foldable and swinging, with manual central locking) * 4 mm steel floor * Rear mounting rail for loading ramps ----Load securing: * Lashing point, one per corner, 5 t each * Additionally, four 3 t lashing rings recessed in the side outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps at the rear, integrated under the loading platform in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear posts hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted black * Side panels can be painted in a RAL color of your choice (no special or metallic paintwork), changeable up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL Fodpoq Euagsfx Acpeph * New vehicle with manufacturer warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye Fpodpjxf Skpofx Acpoh ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring (TPMS) * LED lighting ----General attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox front right outside on bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: Fjdpexglh Rofx Acpoph * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down, trapezoidal steel sideboards with tailgate spring assist * Insertable steel rear wall between ramps – holder for disuse located inside at the bulkhead * Bolted rear stanchions ----Load securing: * Punched outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Optionally with 3 t folding lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Various holes in bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical open-grid drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of side panels in any RAL color available at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 30/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long Fsdpfxjylfvgs Acpeph * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equaliser assembly ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flanged drawbar eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V, 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Equipment: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Right-hand side plastic tool box * Two-step entrance front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the side and rear in the central locking mounts and 2 on the front wall * Steel 3-way tipper body (continuous side walls – without central posts – foldable with board wall spring assist, foldable and swinging rear flap with manual central locking) * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side, integrated into the external frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment underneath the loading deck, integrated into the chassis Fsdpfol Thw Iox Acpoph ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, drawbar eye and support winch painted in black * Side wall paintwork in your chosen RAL colour (no special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty Fedpol Th Adsfx Acpeph * Subject to errors and prior sale * Immediately available ex Egestorf