Müller-Mitteltal Tra-Kombi 18,0 Abroll/Absetz/Tieflader kúpiť použité (25 919)

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes Rjdpfsu I Iqfox Advet * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector Rsdpou I Iq Esfx Advet * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 900 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety locking pins for different support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash guards Rsdpfx Aexyniwodvot * Closed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking clamps to secure drum at the bearing arm ends and a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic supply and return lines * Steel construction and hydraulics prepped for retrofitting an auxiliary engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) Rjdpfeykx Nkex Advst ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: Rjdsykx Nqepfx Advet * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/1992, Rok výroby: 1992, Výbava: ABS, Hrubá hmotnosť: 3.140 kg Užitočné zaťaženie: 14.860 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 1.500, US$ 1.767 Rjdpsxt Sd Sofx Advjt

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30.0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Infotool am Anhänger, inkl. Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelsätze vorn und hinten * Vorderachse mit geschlossenen Kunststoffkotflügeln, Hinterachse mit geraden, feuerverzinkten Stahlblechschürzen, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestellplattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumkennleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkeransteuerung * Zugstange mit 40 mm Zugöse sowie Höhenverstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeige im LKW über EBS-Signal (keine LKW-seitige Installation notwendig) * Gummiauflage auf den Klapprampen sowie an der Auffahrschräge links und rechts (ca. 860 mm lang) * Gummibelag auf den Längsträgern vom Stirn- bis Abschlussquerträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Jeweils 4 Rungentaschen pro Seite, kombinierbar mit 2 t Zurrmöglichkeit * LaSi-Paket bestehend aus: 5 Paar UVV-Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar, im Außenrahmen eingelassen – in den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtladebreite (nicht an der Heckschräge) * Bohlenhalterung unter der Ladefläche, längsseitig * Walzenanschlag vor dem Stirnträger, hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer seitlicher Rampenverschub * Heckabstützung hydraulisch (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei Pumpenleistung LKW > 40 l/min bis max. 140 l/min) * Spritzwassergeschützter Hydraulik-Steuerblock * Zweileitungshydraulik * Ladefläche über Drehkranz: ca. 1.960 x 2.520 mm Rjdpeq Dyvcjfx Advst * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm (Luftfederung) * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen & Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugstange, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Verfügbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30,0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Informations-Tool am Anhänger, mit Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelpakete vorne und hinten * VA (Edelstahl) geschlossene Kunststoff-Kotflügel vorne sowie verzinkte, gerade Stahlblechschürzen hinten, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestell-Plattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkansteuerung * Zugschere mit 40 mm Zugöse und Höheneinstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeigeoption im LKW über EBS-Signal (ohne separate LKW-Installation) * Gummibelag auf den Klapprampen sowie auf den Auffahrschrägen links und rechts (je ca. 860 mm lang) * Gummibelag auf Längsträgern vom Stirn- bis Abschlussträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Je Seite 4 Rungentaschen mit gleichzeitiger 2 t Zurrmöglichkeit * Ladungssicherungspaket bestehend aus: 5 Paar UVV-zertifizierte Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar und im Außenrahmen eingelassen – an den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtbreite (nicht in der Heckschräge) * Bohlenhalter unter der Ladefläche, längs verbaut * Walzenanschlag vor dem Stirnträger hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer Seitenverschub der Rampen * Hintere hydraulische Abstützung (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei hydraulischer Pumpenleistung des LKW von über 40 bis max. 140 l/min) * Hydrauliksteuerblock spritzwassergeschützt * Zweileitungshydraulik * Ladefläche über dem Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm durch Luftfederung * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen und Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugschere, Luftkessel etc. in Schwarz lackiert Rodpfxotplv Ns Advjt * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Hersteller-Gewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Lieferbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Mounting brackets in front of the bulkhead and rear slope, provision for subsequent installation of container locks for transport of 20" containers Redpfx Adol Tihxevjt * Drawbar with 50 mm flange draw eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * Version 21 t GVW with reinforced frame and axles * Reinforcement package for drill rig transport on chassis * 50 mm softwood floor, clamped design * Mounting points in front of the bulkhead for container locks retrofit * Bolt-on bulkhead made of flat sheet metal * Split side walls of steel sheet, trapezoidal profile, folding with centre folding stake * Rear wall of steel, sliding between the ramps (bracket for storage in the front when not in use) * Bolt-on rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for 3 t drop lashing rings every 600 mm * Profifix lashing rail in the longitudinal axis, centre, for lashing up to LC 3000 daN * One 10 t lashing ring in each corner front and rear * Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmembers for 1.2 t lashing capacity * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear approach ramp approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paint color can be freely chosen up to approx. 2 weeks before production, but no metallic or special colors * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (TPMS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering function Redpfx Adjq Dyu Uovot * Mounting provisions front (bulkhead) and rear slant for retrofitting container locks for 20" container transport * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped design * Bulkhead with provisions for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls of steel sheet (trapeze-profiled), foldable, with central folding stanchion * Removable steel rear wall, slides between ramps – stored inside at bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t drop-forged lashing brackets every 600 mm * Profifix lashing rail along the central axis for lashing capacity up to LC 3000 daN * Each front and rear corner with one 10 t lashing ring * Lashing package: each side with two 8 t foldable lashing rings in the outer frame; various holes in bulkhead and rear cross member for 1.2 t lashing options * Single-piece mechanical grid ramp with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Rear approach angle/chassis slope approx. 860 mm * Drawbar, bulkhead, rear flap, foldable supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Body paintwork in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and interim sale * Available from week 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system Rjdspk Dyxepfx Advst ----General Attachments: * Jost landing gear at the front * 2 x external folding supports at the rear * Enclosed single plastic mudguards * Folding A-sign at the rear * Plastic underrun protection buffer * Hot-dip galvanized impact protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings on each side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame * Equalizing chain with eye and quick shortener, both sides, special Y version, 6.3 t ----Skip Stops: * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum-type stop, can be fixed in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black tone ----Information: * Lashing force with load securing certificate * Subject to prior sale and errors * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: Rsdpfx Asl Thyqedvet * Wabco EBS brake system * Emergency release device for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop-down stabilisers at the rear * Closed individual plastic mudguards * Foldable rear A-plate * Plastic underrun protection buffers * Hot-dip galvanized front impact guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum stop, insertable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stav: použitý, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 92 300 mm, šírka ložného priestoru: 24 900 mm, výška ložného priestoru: 30 200 mm, Rok výroby: 2018, Výbava: ABS, = Other Options and Accessories = - EBS – Electronic Braking System - Air suspension rear - Air suspension front = Notes = Rodpfeyxkluex Advot For any inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Müller-Mitteltal TS 3 PROFI 30.0 Machine Transporter Additional rear work lights, side-mounted left and right, BPW axles, Wabco ABS, drum brakes, spring-loaded brake chambers, 3rd axle steerable, hydraulic loading ramp, rear stakes extendable to the side, sliding roof, sliding curtain side, permissible gross weight: 36,000 kg (technically 42,000 kg), unladen weight: 11,100 kg, payload: 24,900 kg (technically 30,900 kg), cargo space dimensions: rear to kink: L 9,230 mm W 2,490 mm H 3,020 mm, kink to front wall: L 4,000 mm H 2,470 mm, tyre tread depth: 1st axle 7–11 mm | 2nd axle 9–10 mm | 3rd axle 8–10 mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (by phone) will be happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale! Steering axle = Further Information = Unladen weight: 11,100 kg Payload: 24,900 kg Gross vehicle weight: 36,000 kg Please contact Tobias Ebert for further information.

Stav: použitý, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, Výbava: ABS, * Müller Mitteltal 3-nápravový príves pre abroll kontajnery * Typ TM 2 24 * Pre dva abroll kontajnery od 7 do 10 m³ * Zaistenie nákladu len dvoma reťazami na každý kontajner * Dvojitá pneumatika 265/70 R19,5 * Vzduchové odpruženie * Nápravy BPW * Otočný oje pneumaticky sklopiteľné s pneumatickým odistením Redpeyx R Ensfx Advst * 8 UVV kotviacich ôk 5t na upevnenie upínacích prvkov * 8 preklápateľných dorazov kontajnerov na bočné centrovanie * EBS * Technicky prípustná celková hmotnosť 27 000 kg

Stav: použitý, maximálna hmotnosť nákladu: 17 290 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2017, ďalšia kontrola (TÜV): 07/2026, dĺžka ložného priestoru: 8 900 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS Rjdoyulu Uepfx Advet * 5-komorové zadné svetlá * Oranžové výstražné majákové svetlo * Duomatik vzduchová prípojka * BPW-ECO nápravy ----Nadstavba: nízkopodlahový príves, pozinkovaný rám (1900+7000mm)/nakladacia výška cca 900mm, zadná časť skosená/nábehová výška cca 770mm, oceľovo-drevená podlaha, rozšíriteľná na 3 m, hydraulické nájazdové rampy (pozinkované) s protišmykovou vrstvou, aj hydraulicky posuvné do strán, upevňovacie oká Predaj len podnikateľom. PRI EXPORTE PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď imprint).

Stav: použitý, maximálna hmotnosť nákladu: 5 900 kg, celková hmotnosť: 9 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2020, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, objem nakladacieho priestoru: 5 m³, Výbava: ABS, * ABS * 5-komorové zadné svetlá Rodpfxoyncyhj Advet * Výškovo nastaviteľné ťažné zariadenie * Gigant nápravy * Predný podperný navijak ----Nadstavba: nízkozdvižný príves, výška ložnej plochy cca 870 mm, vzadu znížený, výška nájazdu cca 780 mm, priečne odpružené oceľové bočnice vľavo + vpravo, drevená podlaha, úchyty na upevnenie nákladu (očká a krúžky). Odpružené a bočne posuvné nájazdové rampy s pozinkovanými protišmykovými mriežkami (dĺžka cca 2 600 mm), automatické zadné podpery, prepojené s ovládaním rampy, plastová skrinka na náradie pred čelnou stenou. Podvozok/predná stena/ťažná oj/zadná stena/rampy + stĺpiky žiarovo pozinkované. Predaj iba podnikateľom. PRI EXPORTE JE SPLATNÁ LEN ČISTÁ CENA!!!!! VŠETKY ÚDAJE SÚ BEZ ZÁRUKY, VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (pozri tiráž).

Stav: použitý, pohotovostná hmotnosť: 3 280 kg, maximálna hmotnosť nákladu: 14 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2013, zavesenie: vzduch, veľkosť pneumatiky: 265/70 R19,5, rázvor náprav: 5 030 mm, Výbava: ABS, | Müller-Mitteltal kontajnerový príves | Náradie box | Pozinkované | Pneumatiky: 265/70R19,5 | Kotúčová brzda BPW | STK platná do | Zmena, chyby a predchádzajúci predaj vyhradené. Rsdpswd Sdcofx Advot

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) Rodpfxoq Euake Advst ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection Rsdpfxjtpta De Advot * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck Rsdpfx Aeykx I Hjdvst * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Redpfxoykx I Ts Advst Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0: * Wabco EBS brzdový systém * RDÜ systém monitorovania tlaku v pneumatikách * Núdzové uvoľnenie pružinových valcov * Bubnové brzdy * 2 x 10 t BPW Eco nápravy Rodpfxel Th Hws Advot * Parabolické listové pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom * Ťažná tyč s 50 mm prírubovým okom a výškovo nastaviteľná ťažná tyč * Predná stabilná podpera Jost * Zadné výklopné opory zvonka * Bočný ochranný rám proti nárazu * Plastové štvrtinové blatníky * 15-kolíkový elektrický konektor * LED zadné svetlá * 50 mm podlaha z ihličnatého dreva * Príprava pred čelnou stenou na dodatočnú montáž uzáverov kontajnera * Skrutkovaná čelná stena z hladkého plechu * Bočné steny z oceľového plechu - trapézový profil - sklopné s pružinovým zdvihákom bočnice * Zadná oceľová stena zasúvateľná medzi rampy s držiakom vo vnútri pred čelnou stenou, ak sa nepoužíva * Skrutkované zadné stĺpiky * Perforovaný vonkajší rám ohnutý cca 45° so zaťažiteľnosťou 2 t každých 480 mm * Možnosť inštalácie 3 t závesných upevňovacích ôk každých 600 mm * V predných a zadných rohoch vždy 1 x 10 t upevňovacie oko, v čelnom a koncovom nosníku rôzne otvory na upevnenie 1,2 t * Profifix upevňovacia lišta v pozdĺžnej osi uprostred na upevnenie do LC 3000 daN * Jednodielne mechanické rampy s roštom a pružinovým mechanizmom pre jednoručnú obsluhu cca 2.750 x 620 mm (možno stiahnuť na 20 mm) * Zadný nábehový uhol cca 860 mm * Podvozok, ťažná tyč, čelná stena, zadná stena, rampy a výklopné opory žiarovo pozinkované * Náter bočníc v RAL 9010 čistá biela * Náter bočných stien v inom RAL odtieni za príplatok * Nápravy, pružiny, vzduchové nádrže, prírubové oko a stabilná podpera v čiernej farbe * Nové vozidlo s plnou zárukou výrobcu * Zmeny a predchádzajúci predaj vyhradené * Dostupné približne od týždňa 21/2026 * Ilustračné fotografie

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0: * Wabco EBS brzdový systém * RDÜ systém monitorovania tlaku v pneumatikách * Núdzové vypúšťanie pre pružinové brzdové valce * Bubnové brzdy * 2 x 10 t BPW Eco nápravy * Parabolické pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom * Ťažné oje s 50 mm prírubovým ťažným okom a výškovo nastaviteľné oje * Predný podperný zdvihák Jost * Vonkajšie vyklápacie podpery vzadu * Bočný nárazový ochranný systém Rodsl Th Hlopfx Advot * Plastové štvrť-blatníky * 15-pólová elektrická zásuvka * LED zadné svetlá * 50 mm podlaha z ihličnatého dreva * Pred prednou stenou pripravená montážna sada pre dodatočnú montáž kontajnerových zámkov * Skrutkovaná predná stena z hladkého plechu * Bočné steny z oceľového plechu – trapézový profil – sklopné s plynovou pružiou na sklápanie * Oceľová zadná stena zasúvateľná medzi rampy – držiak pri nevyužívaní vo vnútri pri prednej stene * Zadné stĺpiky skrutkované * Dierovaný vonkajší rám, ohnutý cca 45 stupňov, s viazací silou 2 t každých 480 mm * Možná montáž 3 t padacích upevňovacích oka každých 600 mm * V každom rohu vpredu a vzadu 1 x 10 t viazacie oko, vo prednej i zadnej priečnej stene rôzne otvory na upevnenie 1,2 t * Profifix upevňovacia lišta pozdĺž stredu vozidla pre upevňovacie možnosti až do LC 3000 daN * Jednodielne mechanické roštové najazdové rampy s pružinou pre jednému obsluhu, cca 2 750 x 620 mm (zúžiteľné na 20 mm) * Zadný najazdový sklon cca 860 mm * Podvozok, oje, predná stena, zadná stena, nájazdové rampy a výklopné podpery žiarovo pozinkované * Nátery bočníc v RAL 9010 čistobiele * Nátery bočných stien možné vo farebnom odtieni RAL za príplatok * Nápravy, pružiny, vzduchové nádrže, prírubové ťažné oká a podperný zdvihák natreté čiernou farbou * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dodanie cca od 21. týždňa roku 2026 * Ilustračné obrázky

Stav: použitý, maximálna hmotnosť nákladu: 14 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2010, ďalšia kontrola (TÜV): 05/2025, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 1 300 mm, Rok výroby: 2010, Výbava: ABS, MÜLLER MITTELTAL RA18 Trailer for hook-lift containers with external rollers 5,500 mm – 7,000 mm German trailer, second owner Technical Data Suitable for hook-lift containers with external rollers, in lengths of 5,500–7,000 mm (internal length), for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40-70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Main chassis frame with raised outer rails to guide the roll-off containers, hot-dip galvanized - Container locking system: The container is secured by 2 pneumatic cross-clamping units at 4 points. After sliding the container onto the trailer, the 4 locking claws are engaged via a valve, fixing the container against the chassis frame. - Additional front securing via 2 plug-in pieces (with empty holder), insertable in various positions along the guide rails. - 2 x 9t BPW axles, 420 mm drum brakes, with air suspension units - Air suspension with lowering function - Steel welded chassis construction - 2-line braking system in accordance with EC EBS regulation - DUOMATIC coupling head Rodpfjvg T Nyox Advst - Spring-loaded parking brake - 24 V electrical system - Multi-chamber lighting - 15-pin connector with cable - Lighting according to EC regulations - Factory silver rims - Aluminium underrun protection - Chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800 x 300 x 500) Condition corresponding to age and mileage! Delivery available at extra cost. All information provided without guarantee! Sale to businesses or export only! ATTENTION: PRICE IS NET PLUS VAT Deutsch, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Stav: nový, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference number: 11612 * NEW VEHICLE, immediately available, in RAL 9016 traffic white * Home delivery available at additional cost! * GVW: 11,900 kg, payload: 8,750 kg * Galvanized floor 5m x 2.42m x 0.5m; sideboards swingable, foldable, and detachable; pre-equipped for retrofitting additional sideboard extensions * Bulkhead hot-dip galvanized * Lockable compartment under the tipping bed for access ramps * Includes loading ramps 3.31m, 8t per pair * 4 UVV load securing rings LC 5000daN front and rear * 8 recessed and foldable lashing rings LC 3000daN in the tipper floor (centered) * Mesh hooks * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Galvanized chassis frame * Tyres: 235/75R 17.5 (set of 4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12V+24V * Side marker lights with indicator function * Bolted, galvanized rear stanchions * Excavator bucket tray mounted on the front wall Redeyl Ebpjpfx Advjt ---- Please request a quote – additional equipment available Financing from as little as €405 net per month over 72 months, no down payment, no final installment. An offer from our financing partner "FM LeasingPartner" ---- Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours, visits are possible by arrangement. Whatsapp Leasing, financing, and trade-ins available ----