Müller-Mitteltal T 3 Profi 30,0, Hydr. Rampen, Baggerstielmulde kúpiť použité (65 889)

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) Chsdpfjl Tphrsx Ahuoa * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor Cedpfox Nli Nsx Ahueha ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side Chjdpfxex Nlkao Ahusa * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) Chsdpfx Ahswh Hdxouja * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting Chodpox Nlkgefx Ahuoa ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear, front * Folding galvanized steel underrun protection for paver loading * Closed individual plastic mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without center stanchion – pendulum-mounted via manual central locking and left side drop-down with side wall spring assist) * Sliding tarpaulin similar to RAL 7038 agate grey with tensioning by lateral tensioning ratchets and tensioning cords at the front and rear * Front wall platform made of grating with access step at the drawbar and handrail on the front wall * Rear wall – made of HBW 400 steel – pendulum-mounted via automatic dual claw lock Codpfx Ahsxl Nkgoueha * 5 mm steel floor made of HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Side wall painting in any desired RAL color (except for special or metallic finishes), changeable up to approx. 6 weeks prior to completion * Axles, air tanks, landing gear, flange towing eye painted in a shade of black * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Stav: použitý, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2015, ďalšia kontrola (TÜV): 07/2025, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 1 000 mm, farba: modrá, Rok výroby: 2015, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Stav podľa fotografií * Müller-Mitteltal trojstranný sklápací príves, typ KA-TA-R 18,0 Tandem * Rozmery sklápanej korby: 4 800 x 2 400 x 1 000 mm * Rolovacia plachta * Vzduchové odpruženie * Kotúčové brzdy Chodpfjwz H Nbox Ahuja * Podesta * Podpera Jost * Nosnosť 13 500 kg V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je VŽDY BEZ novej technickej kontroly (TÜV), bez novej DGUV, bez novej SP a bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webovej stránke. Hovoríme týmito jazykmi: nemecky, anglicky, poľsky, turecky. Upozornenie: Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly tovaru, aby nevznikli nesprávne predstavy o stave a vhodnosti produktu. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Všetky informácie sú bez záruky. Za chyby alebo omyly v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa osobne presvedčiť o stave a výbave tovaru / vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Further information Chodpjvy Tvtsfx Ahuja New: No

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Prevádzková hmotnosť: 2.900 kg Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec Codjyz H Azepfx Ahuoha - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Plateau: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové odblokovanie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 5,5 t BPW nápravy ----Zavesenie: * Vzduchové odpruženie s možnosťou zdvíhania a znižovania ----Ťažné zariadenie / Prírubové ťažné oko: * Výškovo nastaviteľné ťažné zariadenie do 300 mm * Ťažné zariadenie skrátené o cca 200 mm na cca 1 800 mm (tým pádom B-rozmer cca 8 080 mm) * Prírubové ťažné oko 40 mm ---- Elektrika / Osvetlenie: * 15-kolíková elektrická zásuvka * LED svetelná sústava 12 / 24 V * 2 prídavné LED cúvacie svetlá vzadu (spínané spätným chodom) * 1 LED maják (odnímateľný vrátane držiaka) vzadu * RDÜ (monitorovanie tlaku v pneumatikách) ----Všeobecné príslušenstvo: * Mechanicky nastaviteľné 3 m výstražné tabule vpredu a vzadu * Podperná kľuka vpredu * Vzadu vyklápacie podpery * Plastové náradie skrine cca 750 x 350 x 300 mm po oboch stranách vľavo a vpravo * Bočný nárazník * Podvozkový chránič * Plastové štvrtinové blatníky Codpoy U A Elofx Ahueha ----Ložná plocha: * 400 mm vysoká skrutkovaná predná stena * 50 mm podlaha z ihličnatého dreva * 2 páry kontajnerových zámkov (vysúvateľné na 3 m vonkajšiu šírku kontajnera) s možnosťou zaistenia, rozmer zámku zasunuté podľa ISO – DIN 15190 = 2 259 mm, vysunuté zámky = 2 819 mm (tento rozmer nie je podľa DIN) pri celkovej vonkajšej šírke 3 000 mm ----Zabezpečenie nákladu: * Dierovaný vonkajší rám ohnutý cca 45 stupňov s 2 t uväzovacou silou každých 480 mm * Možnosť inštalácie 3 t sklopných uväzovacích ôk každých 600 mm – na každej strane zabudovaných 5 x 3 t UVV-uviazacích ôk * V rohoch vpredu a vzadu po 1 x 6,3 t uväzovací bod (vpredu priamo za kontajnerovými zámkami v podlahe, vzadu v koncovej priečke) * Vo prednej stene a koncovej priečke rôzne otvory pre 1,2 t možnosti uväzovania ----Rampy: * 1 pár hliníkových zasúvacích rámp cca 3 310 x 410 mm (nosnosť 8 t / pár), vhodných pre pneumatikové a pásové vozidlá * Vzadu pod ložnou plochou v podvozku zabudovaný úložný priestor ----Lakovanie: * ---Podvozok, ťažné zariadenie, predná stena, podvozkový chránič a zadné výstuže žiarovo pozinkované--- * Nápravy, vzduchové zásobníky, predná podperná kľuka a prírubové ťažné oko lakované v čiernej farbe ----Info: * Nové vozidlo so zárukou výrobcu * Chyby a medzi-predaj vyhradené * Ilustračné fotografie ----Dodacia lehota: * Dodanie od cca 38. kalendárneho týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Platform: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye Csdpsy U A Efjfx Ahujha ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (including holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General attachments: * Mechanically adjustable 3-metre warning sign kits front and rear * Support winch at the front * External foldable support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on left & right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading area: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container exterior width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - each side fitted with 5 x 3 t UVV lashing rings - * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wood floor as well as rear in the rear cross member) * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, rear underrun protection, as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch, and flange towing eye painted in a black tone ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering mechanism ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED beacon (removable incl. bracket) at the rear * TPMS (tire pressure monitoring system) ----General attachments: * Mechanically adjustable 3 m warning panel sets, front and rear * Landing leg at the front * Externally mounted folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each installed left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN), with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible - 5 x 3 t UVV lashing rings each side installed * 1 x 6.3 t lashing ring in each of the front and rear corners (front directly behind the container locks in the wooden floor, and rear in the end crossmember) * Various holes in front wall and end crossmember for 1.2 t lashing options ----Ramps: Cjdpfov D Tbdox Ahueha * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (10 t load capacity / pair), suitable for rubber-tyred and tracked vehicles * Rear loading compartment integrated under the platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg and flange drawbar eye painted in black shade ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 39/2026

Stav: nový, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Číslo pri dopytoch: 31943-O * NOVÉ VOZIDLO čoskoro dostupné v požadovanej farbe. Müller-Mitteltal KA-TA-R 11,9 tandemový trojstranný sklápací príves s nízkou ložnou plochou a rampami * Pneumatiky 385/55 R19,5, (4 kusy), nápravy BPW, parabolické pružiny, bubnové brzdy * Celková hmotnosť: 11 900 kg, užitočná hmotnosť: 8 750 kg. * Systém kontroly tlaku v pneumatikách s možnosťou zobrazenia na LKW cez EBS signál * EBS namiesto ABS, 24 voltov * EBS multivoltážny systém pre 24V a 12V vozidlá (napr. traktory) * Bočné obrysové svetlá s integrovaným ukazovateľom smeru * LED osvetlenie pre 12V a 24V * 2 x dodatočné LED cúvacie svetlá * Podlaha žiarovo pozinkovaná 5 m x 2,42 m, bočnice 0,5 m, laserovo zvárané, výklopné a snímateľné * Pripravené pre dodatočnú montáž nadstavby bočníc * Uzamykateľný box pod sklápaním pre nájazdové rampy * Vrátane hliníkových rámp, nosnosť 8 t, dĺžka 3,57 m, uložené v rampovom kanáli pod sklápacou časťou * Podlaha žiarovo pozinkovaná, čelná stena žiarovo pozinkovaná Chsdezbfmkspfx Ahusa * 4 upínacie krúžky UVV LC 5000 daN vpredu a vzadu + 8 zapustených sklopných upínacích ôk LC 3000 daN v podlahe sklápacieho priestoru (vycentrované) * Plynulo výškovo nastaviteľné oj, žiarovo pozinkované, ťažné oko 40 mm * Háky na sieť * Skrutkované, pozinkované zadné stĺpiky * Držiak na lyžicu bagra namontovaný na čelnej stene * Jeden plastový náradový box na ráme podvozka vpravo * Nástep k čelnej stene ---- * Sme obchodným partnerom Müller-Mitteltal ---- * Vyžiadajte si ponuku od nás! * Napríklad 545 € bez DPH pri 60 mesiacoch bez akontácie a bez zostatkovej hodnoty. Ponuka nášho financujúceho partnera FM LeasingPartner ----Naše otváracie hodiny: Pondelok - Štvrtok: 08:00 - 17:00 Piatok: 08:00 - 15:00 Mimo otváracích hodín sme vám k dispozícii po dohode. Hovoríme po nemecky, anglicky, poľsky, francúzsky, Whatsapp Leasing, financovanie, výkup možný----

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of air suspension during tipping (can be deactivated via control unit in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tires: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with elevated support for connection lines ----General Attachments: * Front support winch * Bolted steel underrun protection * Plastic quarter fenders in front of the first and behind the last axle * Removable protective grid for rear lights (not approved under the German Road Traffic Licensing Regulations and must be removed before driving on public roads) ----Chassis: Chsdpsy Tr Hisfx Ahuoa * Chassis made of fine-grain steel ----Tipping Body: * Steel 3-way tipper body (fixed front wall, continuous side walls without central stanchions, right side wall swinging via central lock and foldable with drop-side spring assist * Left side wall foldable with drop-side hydromatics * Rear tailgate swinging via automatic hook lock * 5 mm steel floor plate made of HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, support winch, flange drawbar painted in black tone * Tipper body painted in a RAL custom color of choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion * Chassis, protective grid for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery Time: * The vehicle is still under construction and will be completed in calendar week 44 / 2026, provided uninterrupted and consistent production

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-assist for maneuvering purposes on the 1st axle (engaged via EBS) * 1st axle as a lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated via a control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector Codey Tr Hcepfx Ahusha * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * LED rear lights 12/24V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling, mm ----Coupling Height: * Coupling height approx. 440 - 550 mm loaded, with raised gantry for connecting lines ----General Attachments: * Support winch at the front * Bolted steel underrun protection * Plastic quarter mudguards in front of the 1st and behind the last axle * Removable guard for tail lights (not permitted for use on public roads as per national traffic regulations and must be removed before entering public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel 3-way tipper body (fixed headboard, continuous side walls—without central stanchions—right side wall hinged with central locking and foldable via drop-side spring bar, left side wall foldable with drop-side hydraulic system) * Rear tailgate hinged with automatic hook locking * 5mm steel floor plate made from HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t lashing rings per side, recessed into the external frame in accordance with accident prevention regulations (UVV) ----Painting: * Axles, air tanks, support winch, flange eye painted in black * Tipper body painted in a chosen RAL standard color (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Chassis, guards for tail lights, hot-dip galvanized ----Information: * Sample images ----Delivery Time: * The vehicle is still under construction and, assuming uninterrupted and consistent production, will be completed in week 44 / 2026.

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General accessories: * Jost mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking as well as 2 on the front wall ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper body: * Steel pallet-style 3-way tipper with continuous side walls, top with inner tube reinforcement – without centre stanchions, foldable with drop-side spring assist * Rear posts bolted * Combination steel double rear doors, asymmetrically split – can be swung and locked up to 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bolt at the rear and central locking, deactivation function for automatic rear wall operation when reversing tipping with open wing door * 4 mm fine-grained steel floor plate * Rear receiver rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner, and 4 x 3 t lashing eyes each side recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment under the loading platform rearwards, integrated in chassis, for the ramps ----Tyres: Codpfsl Th Htox Ahusha * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanised * Axles, springs, air tank and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Side wall paintwork available in other RAL colours at extra charge ----Info: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: Chodpel Th Dusfx Ahuea * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking stanchions and 2 on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls with internal pipe reinforcement, without central stanchions, foldable with board wall spring lifting device * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically divided, can be swung and locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening when tipping, locking via galvanized rod lock at rear and central locking; deactivation function for automatic rear wall function when tipping backwards with open wing door * 4 mm sheet steel floor made of fine-grained steel * Rear guide rail for loading ramps ----Load Securing: * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes each side recessed in the outer frame ----Ramps: * 1 pair of aluminium approach ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for the ramps recessed under the loading bed at the rear of the chassis ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Board wall coating in RAL 9010 pure white * Side wall coating available in any RAL color for an additional charge ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 11 050 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal KA-TA-R 14.4 tandem low-bed three-way tipper trailer with ramps * NEW VEHICLE * Now available immediately in RAL 9016 traffic white, * Leasing, financing, trade-in of your old trailer possible ---- * Reference number for inquiries: 11654 ---- * Remote diagnostics unit (RDÜ) with display option in truck via EBS signal * Side marker lights with blinker control * Gross weight: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m, drop sides 0.5m laser-welded, swingable, foldable and removable, prepared for later installation of extension sides * Lockable compartment under the tipping platform for loading ramp * Including 1 pair of aluminum approach ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashings LC 5000daN front and rear + 8 lashing rings LC 3000daN recessed and foldable in the tipper floor (centered) * Excavator bucket rest made of hardwood * Two-step access ladder in front of the front wall (hot-dip galvanized) * Stepless height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (set of 4), parabolic springs * Net hooks, screw-on rear stanchions, hot-dip galvanized Chsdpfx Aeyvxg Ishuoa * Guide cables for the rear drop side * Plastic toolbox on right-hand side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Lease-purchase price: * e.g., 560¤ for 60 months with no down payment, no residual value. An offer from our financing partner 'FM LeasingPartner.' Other terms with/without residual value or down payment possible * Request an offer from us! * We are Müller-Mitteltal authorized dealers * Free home delivery possible with timely order! ----Our opening hours Monday - Thursday: 08:00 - 17:00 Friday 08:00 - 15:00 Outside these hours, we are available by arrangement. We speak German, English, Polish, French. Whatsapp

Stav: nový, maximálna hmotnosť nákladu: 51 000 kg, celková hmotnosť: 60 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 210 mm, šírka ložného priestoru: 2 550 mm, celková dĺžka: 13 500 mm, celková šírka: 2 550 mm, celková výška: 3 000 mm, Výbava: ABS, Nakladacia plošina: 8220 mm, rozšíriteľná na 3000 mm, sklon vzadu: 790 mm, labutia krk: (D) 3200 mm, úložný box na labutom krku (D x Š) 600 x 2550 mm, oceľové bočnice 470 mm, výškový rozdiel labutieho krku – plošiny: 270 mm, výška nakladacej plošiny: približne 1000 mm, hydraulické nájazdové rampy, bočne posuvné (D x Š) 2900 x 800 mm, elektrické hydraulické čerpadlo, hydraulické rýchlouvoľňovacie spojky, 7 x ťažké upevňovacie oká na každej strane, „OMS“ zdvíhacie mechanizmy, vysúvateľné výstražné tabule, ABS, EBS, systém Haldex EB+ GEN3, „MPD“ náprava(y), bubnová brzdová sústava, vzduchové odpruženie s mechanizmom na zdvíhanie a spúšťanie, LED svetlá, vozidlo môže byť polepené reklamou a/alebo označené. SI86967 Chedpjzq Nfujfx Ahusa Naša ponuka vo všeobecnosti neobsahuje nové technické kontroly TÜV. Ak si želáte nové technické kontroly TÜV, radi vám predložíme ponuku našich partnerských servisov! Vozidlo môže byť polepené reklamou a/alebo označené. Platí naše všeobecné obchodné podmienky pre dodávku a platbu. Radi vám vypracujeme ponuku financovania alebo lízingu pre túto položku. Kontaktujte nás!

Stav: nový, pohotovostná hmotnosť: 1 170 kg, maximálna hmotnosť nákladu: 2 330 kg, celková hmotnosť: 3 500 kg, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 2 000 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ANHÄNGERWIRTZ, váš obchod s prívesmi, ponúka kvalitné značkové prívesy! viac ako 850 nových prívesov na sklade viac ako 130 použitých prívesov neustále v ponuke. Orientačná ponuka: Akcia platí do vyčerpania zásob! Martz sklápací príves 400/3, 406x200x40 cm, profesionálna oceľová konštrukcia, elektrický systém + NHP, rampy, podpery, kyvadlová náprava, trojnápravový podvoz 13", 3500 kg. Nový oceľový sklápací príves s trojnápravovým podvozom, vrátane rampy na prepravu stavebných strojov, za výhodnú cenu. Po objednávke je k dispozícii na vyzdvihnutie v našom internetovom obchode. Nový vozík, faktúra s vyčíslenou DPH, záruka od autorizovaného predajcu už 35 rokov. Codezrg Upopfx Ahusha 08.2026 MA-MW3OVP.350.400.200.1162KT3EVC5D9GHP

Stav: nový, maximálna hmotnosť nákladu: 37 619 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 240 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2026, Výbava: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t ramps | Top Equipment Location: Germany Condition: New / unused Availability: Immediately Cedpfx Asx Efzuehueha Description For sale: a brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader trailer, year 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. Technical Specifications Dimensions • Total length: 13,190 mm • Platform length: 9,240 mm • Platform height: 875 mm • Total width: 2,550 mm (+600 mm with side extensions) • Gooseneck length: 3,950 mm • Unladen weight: approx. 10,381 kg Weights • Perm. total weight at 80 km/h: 48,000 kg • Perm. total weight at 60 km/h: 52,800 kg • Total axle load: 30,000 kg • King pin load: up to 18,000 kg Running Gear & Axles • 3 BPW axles, air-suspended, drum brakes • 1 trailing axle at rear • Lift axle (load-dependent + automatic control from cab) • Tyres: 245/70 R17.5, M+S + 3PMSF • Tyre pressure monitoring R141 • Wabco EBS 4S/3M, ABS + RSS • Wabco Smartboard (axle load, suspension, diagnostics, etc.) Ramps & Loading Area • Folding 40t drive-on ramps • Ramp length: 2,750 mm • Ramp width: 850 mm • Hydraulic sliding system • 45-mm hardwood floor + checker plate over wheel arches Load Securing • Multiple lashing points: 8,000 daN and 13,400 daN • 7×2 stake pockets + plug-in stakes • Container locks for 1×20 ft • Front wall 450 mm, side & rear walls made of aluminium Body & Chassis • High-strength S700 MC steel • Partially metallized (Zn/Al 85/15) – strong corrosion protection • Rear angle: 10°, 500 mm • 2" king pin • Mechanical support legs at front • 45t supports at rear Equipment • 2× tool boxes • Rotating beacon • LED lighting • Rear work lights • Wheel chocks • Extensions 9×2 (up to +300 mm) • Stake box • Side & rear reflector strips Colour: RAL 3020 Traffic Red For further information, please feel free to contact us.

Stav: použitý, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1994, dĺžka ložného priestoru: 13 030 mm, šírka ložného priestoru: 2 600 mm, celková šírka: 2 600 mm, celková výška: 4 000 mm, Ložná plocha: 8620 mm, sklon vzadu: 450 mm, šírka: 2600 mm, šírka: 3111 mm so zväčšením, výsuvné a/alebo sklopné rozšírenia, labutí krk: 3960 mm, výška ložnej plochy: cca. 880 mm, hydraulické nájazdové rampy bočne posuvné (DxŠ) 2900x830 mm, elektrické hydraulické čerpadlo, diaľkové ovládanie s káblom, 2x ťažné úchyty na každej strane, 5x zásuvky na stĺpiky na každej strane, výsuvné výstražné tabule, centrálny mazný systém, podperné navijaky, tri nápravy hydraulicky nútene riadené, bubnové brzdy, vzduchové odpruženie, výstražný maják, cúvacie svetlá, vozidlo môže byť polepené a/alebo označené reklamou. SI85616 Naša ponuka je spravidla bez novej technickej kontroly (TÜV). V prípade záujmu o novú technickú kontrolu vám radi sprostredkujeme ponuku od našich partnerských servisov! Vozidlo môže byť polepené a/alebo označené reklamou. Platí naše všeobecné dodacie a platobné podmienky. Chodpow Sb Sqjfx Ahusa Radi vám pripravíme ponuku financovania alebo leasingu na tento objekt. Neváhajte nás kontaktovať!

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Codpfxshlz S Ne Ahujha Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, maximálna hmotnosť nákladu: 15 970 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 21,0: ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátorové valce * Bubnové brzdy ----Nápravy: * 2 x 11 ton Gigant nápravy ----Zavesenie: * Vzduchové zavesenie so systémom na zdvíhanie a spúšťanie ----Ťažné tyč / prírubová ťažná tyč: * Ťažná tyč s 50 mm prírubovou ťažnou tyčou a výškovo nastaviteľnou ťažnou tyčou ----Osvetlenie / Elektroinštalácia: * 15-pólová zástrčka * LED svetlá 12/24 V * Systém monitorovania tlaku v pneumatikách (TPMS) ----Všeobecné montážne diely: * Predné podperné nohy Jost * Vonkajšie, výklopné podperné nohy vzadu * Plastová skrinka na náradie, cca 750 x 350 x 300 mm, na pravej strane * Bočná ochrana proti nárazu * Plastový blatník ----Ložná plocha: * Pred čelnou stenou a zadnou šikmou časťou, príprava na dodatočnú montáž západkových zariadení pre prepravu 20" kontajnerov * Vyhotovenie s celkovou hmotnosťou 21 ton s vystuženým rámom a vystuženými nápravami * Vystužovací balík pre prepravu vŕtacieho zariadenia na ráme * 50 mm podlaha z ihličnatého dreva v spojenom vyhotovení * Pred čelnou stenou príprava na dodatočnú montáž západkových zariadení * Skrutkovaná čelná stena z hladkého plechu * Rozdelené bočné steny z oceľového plechu – trapézovo profilované – výklopné s výklopným rámom v strede * Oceľová zadná stena zasúvateľná medzi rampami – držiak pri nepoužívaní vo vnútri pred čelnou stenou * Skrutkované zadné rámy ----Zabezpečenie nákladu: * Dierkovaný vonkajší rám, cca 45 stupňov ohnutý, so zaťažiteľnosťou 2 tony každých 480 mm * Možnosť inštalácie 3-tonových otočných upínacích ok 600 mm * Upínacia lišta Profifix v pozdĺžnej osi v strede pre možnosť upevnenia nákladu až do 3000 daN * V rohoch vpredu a vzadu po jednom 10-tonovom upínacom zariadení * Balík Lasi s dvoma 8-tonovými zapustenými upínacími okami na každej strane vo vonkajšom ráme, rôzne otvory v čelnom a záverovom nosníku pre možnosť upevnenia nákladu s hmotnosťou 1,2 tony ----Rampy: * Jednodielne, mechanické, mriežkové nájazdové rampy s pružinovým mechanizmom pre obsluhu jednou osobou, cca 3 000 x 620 mm (zasúvateľné až na 20 mm) * Nájazdová šikmá plocha vzadu, cca 860 mm, rám vozidla Csdpfxsl Tihxs Ahujha ----Výška ložiska: * bez zaťaženia, cca 940 mm * so zaťažením, cca 910 mm ----Rozchod / Pneumatiky: * 1 810 mm * Pneumatiky: 235/75R17.5 ----Lakovanie: * Lakovanie bočných stien v RAL – 9010, čisto biela * Ťažná tyč, čelná stena, zadné dvere, výklopné podpery a nájazdové rampy žiarovo pozinkované * Nápravy, pružiny, vzduchový zásobník a podperné nohy lakované v čiernom odtieni ----Informácie: * Nové vozidlo so zárukou výrobcu * Chyby a predaj vyhradené ----Doba dodania: * ihneď k dispozícii z Egestorfu

Stav: použitý, prvá registrácia: 06/2011, celková šírka: 25 500 mm,