Müller-Mitteltal Tra Kombi Anhänger 18,0 kúpiť použité (25 845)

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember Redpfxsq Dyvco Aafew * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 14 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2010, ďalšia kontrola (TÜV): 05/2025, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 1 300 mm, Rok výroby: 2010, Výbava: ABS, MÜLLER MITTELTAL RA18 Trailer for hook-lift containers with external rollers 5,500 mm – 7,000 mm German trailer, second owner Technical Data Suitable for hook-lift containers with external rollers, in lengths of 5,500–7,000 mm (internal length), for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40-70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Main chassis frame with raised outer rails to guide the roll-off containers, hot-dip galvanized - Container locking system: The container is secured by 2 pneumatic cross-clamping units at 4 points. After sliding the container onto the trailer, the 4 locking claws are engaged via a valve, fixing the container against the chassis frame. - Additional front securing via 2 plug-in pieces (with empty holder), insertable in various positions along the guide rails. - 2 x 9t BPW axles, 420 mm drum brakes, with air suspension units - Air suspension with lowering function - Steel welded chassis construction - 2-line braking system in accordance with EC EBS regulation - DUOMATIC coupling head - Spring-loaded parking brake - 24 V electrical system - Multi-chamber lighting - 15-pin connector with cable - Lighting according to EC regulations - Factory silver rims - Aluminium underrun protection - Chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800 x 300 x 500) Condition corresponding to age and mileage! Delivery available at extra cost. All information provided without guarantee! Sale to businesses or export only! ATTENTION: PRICE IS NET PLUS VAT Deutsch, English: JOSEF Rsdpfx Aaovg T Nysfjw WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: Rsdpeq Euakofx Aafjw * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: veľmi dobrý (použitý), konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 950 mm, celková dĺžka: 7 900 mm, celková šírka: 2 550 mm, celková výška: 1 600 mm, zavesenie: vzduch, farba: červená, Rok výroby: 2021, Stav počítadla: 25 000 km Odpruženie: vzduchové Pohotovostná hmotnosť: 4 609 kg Užitočné zaťaženie: 13 390 kg Celková hmotnosť (zGG): 18 000 kg Značka nadstavby: MÜLLER MITTELTAL 2-NÁPRAVOVÝ TANDEMOVÝ PRÍVES Technický stav: veľmi dobrý Optický stav: veľmi dobrý # Müller Mitteltal ETUE-TA-ER 18 ton tandemový stredový nápravový príves – Transport stavebných strojov a kontajnerov ## Všeobecné údaje Výrobca: Müller Mitteltal Typ: ETUE-TA-ER Prevedenie: tandemový stredový nápravový príves Prvá registrácia: 28.05.2021 Max. prípustná celková hmotnosť: 18 000 kg Pohotovostná hmotnosť: 4 610 kg Užitočné zaťaženie: 13 390 kg ## Popis Tento Müller Mitteltal ETUE-TA-ER sa nachádza vo vynikajúcom, úplne originálnom stave a je skonštruovaný pre profesionálne každodenné použitie. Vďaka kompletne žiarovo zinkovanej konštrukcii, vzduchovému odpruženiu, robustnej podlahe z tvrdého dreva a rozsiahlej výbave je tento príves ideálny na prepravu stavebných strojov, plošín, vysokozdvižných vozíkov, poľnohospodárskych strojov, kontajnerov a iných ťažkých nákladov. Celý príves je žiarovo zinkovaný, čo zaručuje optimálnu ochranu proti korózii a mimoriadne dlhú životnosť. ## Podvozok * Tandemové prevedenie so stredovou nápravou * Kompletne vzduchom odpružený podvozok * BPW nápravy * Plne žiarovo zinkovaný podvozok * Plne žiarovo zinkovaná nadstavba * Hliníkové bočnice * Výška bočníc: 600 mm * Robustná podlaha z tvrdého dreva * Vysoko odolná oceľová spodná konštrukcia * BPW nápravy so vzduchovým odpružením * Pneumatiky cca 60 % dezénu * Blatníky * Zadné podperné nohy pre bezpečné nakladanie a vykladanie * Výstražné tabuľky pre nadrozmerné vozidlá * Vynikajúce jazdné vlastnosti * Konštrukcia nenáročná na údržbu ## Nakladacia plocha * Dĺžka: 6 300 mm * Šírka: 2 500 mm * Nakladacia výška: len 950 mm * Podlaha z tvrdého dreva vo výbornom stave * Hliníkové bočnice po celom obvode * Vrecká na stĺpiky po celej ploche * Kompletná sada oceľových stĺpikov * Viacero ťažkých kotviacich ôk v podlahe * Twistlocky pre prepravu kontajnerov * Ideálne pre profesionálne zabezpečenie nákladu ## Nájazdové zariadenie Rjdpfozh Hx Tjx Aafow Príves je vybavený robustným profesionálnym nájazdovým zariadením: * Hliníkové nájazdové rampy * Vhodné aj pre ťažké stavebné stroje * Jednoduchá manipulácia * Vysoká nosnosť * Ideálne pre: * Rýpadlá * Minirýpadlá * Nakladače * Kompaktné nakladače * Pracovné plošiny * Vysokozdvižné vozíky * Stroje na stavbu ciest * Poľnohospodárske stroje * Iné samohybné stroje ## Rozmery ### Nakladacia plocha * Dĺžka: 630 cm * Šírka: 250 cm * Nakladacia výška: 95 cm ### Celkové rozmery * Celková dĺžka: 790 cm * Celková šírka: 255 cm * Celková výška po hornú hranu hliníkových bočníc: 160 cm ## Výbava * Plne žiarovo zinkovaný podvozok * Hliníkové bočnice * Podlaha z tvrdého dreva * Hliníkové nájazdové rampy * BPW nápravy so vzduchovým odpružením * Twistlocky na kontajnery * Početné kotviace oká * Vrecká na stĺpiky * Kompletná sada oceľových stĺpikov * Výstražné tabuľky pre nadrozmerné vozidlá * Zadné podperné nohy * Profesionálne možnosti zabezpečenia nákladu * Nízka nakladacia výška * Okamžite pripravený k prevádzke ...

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2005, farba: čierny, Rok výroby: 2005, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Náprava s dvojitými kolesami Redexw T Uaepfx Aafjw - Rezervné koleso = Ďalšie informácie = Hrubá hmotnosť: 8.900 kg Užitočné zaťaženie: 26.100 kg CELKOVÁ HMOTNOSŤ: 35.000 kg Predajná cena: € 18.000, US$ 20.890

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Rodpfx Aeykxfloafjw Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: použitý, pohotovostná hmotnosť: 3 000 kg, maximálna hmotnosť nákladu: 15 000 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2007, zavesenie: vzduch, veľkosť pneumatiky: 385/55R22.5, farba: čierny, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, Rjdpfx Aasi Rq Sdjfew Nadstavba: 2-nápravový hákový príves pre kontajnery do 7 m, 2x 9t BPW nápravy, bubnové brzdy, 2x pneumatické uzamykanie! ÚDAJE O VÝBAVE SÚ BEZ ZÁRUKY, zmeny, predaj vyhradený a chyby vyhradené!

Stav: použitý, maximálna hmotnosť nákladu: 5 900 kg, celková hmotnosť: 9 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2020, dĺžka ložného priestoru: 5 370 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, objem nakladacieho priestoru: 5 m³, Výbava: ABS, * ABS * 5-komorové zadné svetlá * Výškovo nastaviteľné ťažné zariadenie * Gigant nápravy * Predný podperný navijak ----Nadstavba: nízkozdvižný príves, výška ložnej plochy cca 870 mm, vzadu znížený, výška nájazdu cca 780 mm, priečne odpružené oceľové bočnice vľavo + vpravo, drevená podlaha, úchyty na upevnenie nákladu (očká a krúžky). Odpružené a bočne posuvné nájazdové rampy s pozinkovanými protišmykovými mriežkami (dĺžka cca 2 600 mm), automatické zadné podpery, prepojené s ovládaním rampy, plastová skrinka na náradie pred čelnou stenou. Podvozok/predná stena/ťažná oj/zadná stena/rampy + stĺpiky žiarovo pozinkované. Rsdpfxjyncyhj Aafsw Predaj iba podnikateľom. PRI EXPORTE JE SPLATNÁ LEN ČISTÁ CENA!!!!! VŠETKY ÚDAJE SÚ BEZ ZÁRUKY, VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (pozri tiráž).

Stav: použitý, maximálna hmotnosť nákladu: 17 290 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2017, ďalšia kontrola (TÜV): 07/2026, dĺžka ložného priestoru: 8 900 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS Rsdjyulu Uepfx Aafsw * 5-komorové zadné svetlá * Oranžové výstražné majákové svetlo * Duomatik vzduchová prípojka * BPW-ECO nápravy ----Nadstavba: nízkopodlahový príves, pozinkovaný rám (1900+7000mm)/nakladacia výška cca 900mm, zadná časť skosená/nábehová výška cca 770mm, oceľovo-drevená podlaha, rozšíriteľná na 3 m, hydraulické nájazdové rampy (pozinkované) s protišmykovou vrstvou, aj hydraulicky posuvné do strán, upevňovacie oká Predaj len podnikateľom. PRI EXPORTE PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď imprint).

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lift and lower function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with force-locking height adjustment Rodpfx Aovin Ucsafew * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing leg at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel drop-side three-way tipper body made of fine-grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet steel * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls — foldable without centre stanchion — with side panel spring lifts and pivoting via manual central locking * Bolt-on rear stanchions * Combination steel wing doors at the rear — 2-leaf, asymmetrically divided — swingable and lockable up to 270°, non-foldable — with additional pendulum frame for automatic rear door opening during tipping; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic rear door opening when tipping backwards with open wing door * 4 mm steel floor plate * Two-step access on the front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * On each side, 4 x 3 t lashing rings integrated into the outer frame ----Loading Ramps: * Recessed ramp chamber at the rear of the chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper body, underrun protection, and rear support legs hot-dip galvanized * Side panels painted in a desired RAL colour (excluding special or metallic paints); changeable up to approx. 6 weeks before completion * Axles, air tanks, flange towing eye, and front landing leg painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * KA-TA-RT 18.0: ---- Braking system: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ---- Drawbar / Flange drawbar eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into underrun protection ---- General attachments: * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards Rsdevin T Sjpfx Aafew ---- Tipping body: * 3-way tipper body made of fine-grained steel for pallets, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed smooth steel front wall * Hard wood plate for excavator bucket mounted on the front wall * Continuous side walls – without centre posts – foldable with spring-assisted side boards, and pendulum system via manual central locking * Rear stanchions bolted * Combined steel double wing rear doors, asymmetrically split, swingable up to 270° and lockable, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary bar lock and central locking, deactivation function for automatic tailgate opening when tipping in reverse with open wing door * 4 mm steel floor plate * Two-step access at front left * Mounting rail at the rear for loading ramps ---- Load securing: * One 7 t lashing point at each corner * Four 3 t lashing points recessed into the side outer frame on each side ---- Loading ramps: * Recessed mounting compartment for loading ramps at the rear of the chassis * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ---- Painting: * Chassis, drawbar, rear stanchions, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanized * Side wall colour can be selected in any desired RAL shade (no special or metallic paint); modifiable up to approx. 6 weeks before completion * Axles, air tanks, flange drawbar eye, front landing gear painted in black ---- Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 45 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12/24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Remote power supply 12+24V via tail light circuit ----General Attachments: * BPW landing gear (front) * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Detachable pin towing eye (usable only with retracted underrun protection) * Closed plastic half-shell single mudguards * Two-step access ladder in front of front wall, left side * Shovel and broom holder in front of front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation ----Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023) * Base frame made of high-strength fine grain steel * 20,000 kg pulling force Redox Dp Atepfx Aafjw * Hook height: 1,570 mm * Hooklift control via remote control * Remote control with quick function for lowering, but not for lifting * Emergency stop switches on left and right sides * Container platform with 4 lateral supports per side and 1 roller at the rear per side * Hydraulic rear lock * 2 additional hydraulic cylinders to support the main boom lifting * 2 x mechanical drop-down rear supports * Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brake System: * Wabco EBS-E braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12/24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail lights ----General Fittings: * BPW landing gear at front * Manually extendable underride guard for container lengths over 6,000 mm * Speedline diamond aluminium rims * Pin-lock tow coupling (use only with underride guard pushed in) * Enclosed plastic half-shell individual mudguards * Two-step access before the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side * Enclosed side guard usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg tractive force * Hook height 1,570 mm * Hookloader control via remote control * Remote control with quick function for lowering only, not for picking up * Emergency stop switches on both left and right sides * Container mountings with 4 supports each side and 1 roller at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down rear supports * Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate. * Monitoring system for underride guard ensuring it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised * Axles, air tank, and front landing gear painted in black * Palfinger hooklift painted black/yellow Rsdpfx Aaox Dp Agjfsw ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: Redpjykx Nkofx Aafsw ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: Rsdsl Thyxspfx Aafjw * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring Rodpfxsl Thyme Aafow * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) Rodpfx Aasykx Nqjfow ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) Rjdsl Th Dfjpfx Aafow * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone Rjdjl Thvxjpfx Aafjw * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2020, ďalšia kontrola (TÜV): 02/2027, dĺžka ložného priestoru: 9 800 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS * Zadná podpera * Nápravy BPW ECO-Plus * Oranžové výstražné svetlo * Hliníkové disky * Duomatik vzduchová prípojka Redpey T Dh Sefx Aafow ----Nadstavba: Pozinkovaný nízkozdvižný príves (2500+7300mm)/Nakladacia výška cca 900 mm, vzadu znížený/Nábehová výška cca 770 mm, oceľové/drevené dno a protišmykový povrch, rozšíriteľný na 3 m, hydraulické nájazdové rampy (skladacie pre nízky nájazdový uhol) s protišmykovou úpravou, hydraulicky bočne posuvné, viazacie oká Predaj len podnikateľom. PRI EXPORTU JE POTREBNÁ IBA ČISTÁ CENA!!!! VŠETKY ÚDAJE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok, predajných rozhovorov sú naše VOP (pozri tiráž).

Stav: použitý, maximálna hmotnosť nákladu: 9 050 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2014, ďalšia kontrola (TÜV): 10/2026, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 2 850 kg Užitočné zaťaženie: 9 050 kg Celková dĺžka: 7 400 mm Dĺžka ložnej plochy: cca 5 500 mm Šírka: 2 550 mm / ložná šírka cca 2 430 mm Ložná výška: cca 1 100 mm Ďalšie informácie - Oj nastaviteľná výškovo Rsdpszc Dnvefx Aafsw - Predný oporný stojan nastaviteľný výškovo - Bočnice 800 mm + sklopné zadné čelo - Bočnice delené, Kinnegrip K20 - BPW nápravy - Vzduchové pruženie - Zakladacie kliny Vozidlo môže byť polepené reklamou a/alebo popisom.

Stav: použitý, maximálna hmotnosť nákladu: 18 150 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2023, dĺžka ložného priestoru: 8 300 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS Rjdpfszaln Sjx Aafow * 5-komorové zadné svetlá * Duomatik vzduchová prípojka * Gigant nápravy * Zadná podpera ----Nadstavba: Nízkozdvižný príves (1800+6500mm)/Nakladacia výška cca 920mm, zozadu skosený/Nábehová výška cca 770mm, oceľovo-drevená podlaha, hydraulické nájazdové rampy (pozinkované), nosnosť 15 000 kg/rampa, kotviace oká + krúžky Predaj len podnikateľom. PRI EXPORTE SA PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE SÚ BEZ ZÁRUKY VRÁTANE VÝBAVY A DOPLNKOV. Základom všetkých kúpnych zmlúv, faktúr, predfaktúr, objednávok a obchodných rozhovorov sú naše VOP (podrobnosti v tiráži).

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t Rsdjtplv Njpfx Aafsw * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/1992, Rok výroby: 1992, Výbava: ABS, Hrubá hmotnosť: 3.140 kg Užitočné zaťaženie: 14.860 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 1.500, US$ 1.747 Rodpfx Aasxt Sd Ssfew

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: Redpfetpta Djx Aafow * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27