Müller-Mitteltal 2-Achs Cont.-Anh., Beladung Von Vorne Und Hinten kúpiť použité (52 876)

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height Djdpfxewh Hdxo Am Sjut * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame Dsdpfx Aol Tnvgsm Sout * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform Dujdpsy Ngzyefx Am Sjt ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood Dujdpfx Amey Ngz Hj Set * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized Duedpspk D I Aofx Am Sot ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2016, Výbava: ABS, Vitajte v spoločnosti Johanning's Nutzfahrzeuge, vašom špecialistovi na mladé a exkluzívne jazdené vozidlá. Okamžite k dispozícii! Doručenie možné. Cena na vyžiadanie! Financovanie a leasing na splátky možné na vyžiadanie. Lokalita: 39606 Osterburg Značka: Mueller Mitteltal Typ: TA-2 / ETUE-TA-R 11,9 Rok výroby: 2016 Prevádzková hmotnosť: 3 250 kg STK platná do: marec 2026 Bezpečnostná kontrola: september 2026 Šírka: 2,47 m Dĺžka: 6,20 m Výška: 90 cm Pre ďalšie fotografie alebo videá nás neváhajte kontaktovať. Johanning's Nutzfahrzeuge, váš partner pre exkluzívne a mladé jazdené vozidlá. Naše služby – vaše výhody (po predaji) - Výkup vášho vozidla možný (v akomkoľvek stave) Duodpfsycpd Asx Am Set - Okamžité bezplatné odhlásenie vášho vozidla - Povolenie na evidenciu vozidla za 150 € (vrátane poplatkov a značiek) - Dočasná značka – - Obhliadka a skúšobná jazda možná kedykoľvek po telefonickom dohovore - Doručenie na adresu možné po dohode Zmeny a medzipredaj vyhradené.

Stav: nový, maximálna hmotnosť nákladu: 6 810 kg, celková hmotnosť: 9 600 kg, konfigurácia náprav: 1 náprava, dĺžka ložného priestoru: 4 030 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * EK 9,6 ----Brzda: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pružinových valcov * Bubnová brzda ----Náprava: * SAF náprava ----Odpruženie: * Parabolické pružiny ----Ťažné zariadenie / Okno na ťažné zariadenie: * Ťažné zariadenie ako stredná oj s 40 mm skrutkovacím ťažným okom * Plynule nastaviteľná výška ťažného zariadenia pomocou vretenového zdvihacieho prvku namiesto pevného ťažného zariadenia ----Výška spojenia: * Štandardná spojovacia výška približne 900 mm (+/- 150 mm) ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v LKW cez EBS signál – bez inštalácie na strane LKW * 15-pólová elektrická zástrčka * LED zadné svetlá * Blikajúce bočné obrysové svetlá Dusdpfx Aow Ndr Usm Set ----Všeobecné príslušenstvo: * Predný podperný zdvihák * Uzavreté plastové blatníky * Sklopná ochrana proti podbehnutiu pre cestné finišery ----Podvozok: * Podvozok z jemnozrnnej ocele ----Sklopná korba: * Paletový 3-stranný sklápač * 700 mm oceľová predná stena * Hliníkové bočné steny asymetrické – priebežné bez stredového stĺpika – sklopné s dlhodobejšími západkami, ako aj kyvné cez manuálne centrálne zamykanie * Oceľová zadná stena vysoká 800 mm a automatické otváranie zadnej steny pri vyklápaní dozadu * 4 mm podlaha z ocele Hardox 450 ----Zabezpečenie nákladu: * Na každej strane 2 páry 3 t sklopných upínacích ok, zapustených v oceľovej podlahe ----Lak: * Podvozok, ťažné zariadenie, ochrana proti podbehnutiu žiarovo zinkované * Lakovanie sklopnej korby v požadovanom odtieni RAL (ale žiadne špeciálne alebo metalické lakovanie), možná zmena do cca 6 týždňov pred dokončením ----Informácie: * Nové vozidlo s výrobnou zárukou * Zmeny a predaj vyhradený, chyby vyhradené ----Dodacia lehota: * dostupné približne od 42. týždňa 2026

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 4 060 kg, maximálna hmotnosť nákladu: 13 940 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, povolené zaťaženie nápravy (náprava 1): 9 000 kg, dovolené zaťaženie nápravy (náprava 2): 9 000 kg, prvá registrácia: 03/2015, ďalšia kontrola (TÜV): 03/2026, dĺžka ložného priestoru: 68 000 mm, šírka ložného priestoru: 2 550 mm, celková dĺžka: 8 600 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, brzda prívesu: príves s brzdou, Rok výroby: 2015, Výbava: ABS, IHNEĎ K DISPOZÍCII!!! VEĽMI DOBRÝ STAV!!! SCHWARZMÜLLER T-SERIE TANDEM 2-nápravový príves Djdpjyku Nmsfx Am Sout Čistá exportná cena: 17.500 EUR

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: Duodsl Tihuepfx Am Sst * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: Duodpfxjxptn De Am Sjt * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift Dsdpfx Asl Th I Asm Ssut * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders Duedpfxsl Th Nnj Am Set * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 plošina: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 7 t BPW nápravy ----Pruženie: * Vzduchové pruženie so zdvíhacími a spúšťacími zariadeniami ----Ťažné zariadenie / prírubové oko: * výškovo nastaviteľné ťažné zariadenie o 300 mm Dusdpfxsv D Tbko Am Sjt * Skrátené ťažné zariadenie o cca 200 mm na cca 1 800 mm (tým pádom B-rozmer cca 8 080 mm) * 40 mm prírubové ťažné oko ---- Elektrika / Osvetlenie: * 15-pólová elektrická zásuvka * LED svetelný systém 12 / 24 V * 2 LED cúvacie svetlá navyše vzadu (ovládané spiatočkou) * 1 LED výstražný maják (odnímateľný vrátane držiaka) vzadu * RDÜ (monitorovanie tlaku v pneumatikách) ----Všeobecná výbava: * mechanicky nastaviteľné 3 m varovné tabuľové balíky vpredu a vzadu * Podperná kľuka vpredu * Vonkajšie sklopné podpery vzadu * Plastové náradie cca 750 x 350 x 300 mm po oboch stranách vľavo aj vpravo * Bočná ochrana proti nárazu * Ochrana proti podjazdu * Plastové štvrť-blatníky ----Nakladacia plocha: * 400 mm vysoká skrutkovaná čelná stena * 50 mm podlaha z mäkkého dreva * 2 páry kontajnerových uzáverov (vysúvateľné na vonkajšiu šírku kontajnera 3 m) a zaistiteľné, uzamykací rozmer zasunuté podľa ISO - DIN 15190 = 2 259 mm. Kontajnerové uzávery vysunuté = 2 819 mm (tento rozmer nie je podľa DIN) pri absolútnej vonkajšej šírke 3 000 mm ----Zaistenie nákladu: * perforovaný vonkajší rám zahnutý pod uhlom cca 45 stupňov s 2 t upevňovacou silou každých 480 mm * Možnosť zabudovania 3 t sklopných upevňovacích ôk každých 600 mm – na každej strane zabudovaných 5 x 3 t UVV upevňovacích ôk * V predných a zadných rohoch vždy 1 x 6,3 t upevňovacie oko (vpredu priamo za uzávermi kontajnerov v drevenej podlahe, vzadu v záverečnom nosníku) * V čelnej a koncovej priečke rôzne otvory pre možnosti upevnenia do 1,2 t ----RAMPY: * 1 pár hliníkových zasúvacích rámp cca 3 570 x 410 mm (nosnosť 10 t / pár) vhodných pre pneumatikové aj pásové vozidlá * Úložný priestor zozadu pod nakladacou plochou, zabudovaný v ráme vozidla ----Lakovanie: * ---Rám, ťažné zariadenie, čelná stena, ochrana proti podjazdu a zadné podpery žiarovo zinkované--- * Nápravy, vzduchový zásobník, predná podperná kľuka a prírubové oko lakované v čiernom odtieni ----Informácie: * Nové vozidlo s továrenskou zárukou * Zmeny a predaj počas ponuky vyhradené ----Doba dodania: * dostupné od 22. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14.4 Platform: ---- Brakes: * EBS (electronic braking system) * Emergency release device for spring brake chambers * Drum brakes ---- Axles: * 2 x 7 t BPW axles ---- Suspension: * Air suspension with raising and lowering function ---- Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector Dusdpfx Amev D Tbdo Sst * LED lighting system 12 / 24 V * 2 additional LED reversing lights at rear (activated via reverse gear) * 1 removable LED beacon (incl. holder) at rear * TPMS (Tire Pressure Monitoring System) ---- General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, on left & right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ---- Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor, * 2 pairs of container locks (extendable to 3 m container external width) and lockable, lock dimensions when retracted as per ISO - DIN 15190 = 2,259 mm, container locks extended = 2,819 mm (this dimension is non-DIN) with an overall external width of 3,000 mm ---- Load Securing: * Perforated external frame approx. 45 degrees angled with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets every 600 mm possible—5 x 3 t UVV lashing brackets each side installed * In the front and rear corners 1 x 6.3 t lashing ring each (front directly behind container locks in wood floor and rear in end crossmember) * Various bores in front wall and rear crossmember for 1.2 t lashing options ---- Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment below the platform, integrated into the chassis ---- Painting: * --- Chassis, drawbar, front wall, rear underrun protection and rear stabilisers hot-dip galvanised --- * Axles, air tanks, front landing leg as well as flange towing eye painted in black ---- Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ---- Delivery Time: * Available from calendar week 22/2026

Stav: nový, pohotovostná hmotnosť: 4 300 kg, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 100 mm, šírka ložného priestoru: 2 480 mm, zavesenie: vzduch, veľkosť pneumatiky: 275/70R22,5, Výbava: ABS, | Schwarzmüller Jumbo stavebný príves | Nápravy BPW s kotúčovými brzdami | Debna na palety, 2x nerezová schránka na náradie | Zadný úložný priestor 600x400x2.900 | Výška bočnice: 1,00 m, výška čelnej steny: 1,40 m | Nakladacie rozmery: 7,10 m x 2,48 m | Hliníkové disky XLite | Pneumatiky 275/70R22,5, dvojmontáž | Plachta z plastu s gumovými pásmi | Hliníková odkladacia vana a nástupný rebrík vpredu | Zmena, chyby v popise a predpredaj vyhradené. Dusdpfx Astuwbpom Sst

Stav: nový, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 880 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 980 mm, Rok výroby: 2026, Nápravy SAF, bubnové brzdy Vnútorná dĺžka cca 4 880 mm Vnútorná šírka cca 2 420 mm Celková šírka max. 2 550 mm Nakladacia výška bez nákladu cca 1 510 mm Rolovacia plachta Dedpfx Amoylf Rqj Seut Pódium Kotviace krúžky v podlahe sklápacieho vozidla Medzipredaj a právo na chyby vyhradené! Vozidlo na prenájom, aj s možnosťou odkúpenia!

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear Dedpfxstplwie Am Sout * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection Dusdpfxexptn Re Am Sst * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS Dujdpfxswmpbds Am Sjt - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED tail lights ----General attachments: * Mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of high-tensile fine-grained steel ----Tipping bed: * Mesh hooks at the sides and rear, located in the central locking bearings, as well as 2 units at the front wall * Steel pallet 2-way tipper body, front wall fixed and made of smooth sheet, continuous side walls – foldable without center stanchions, with drop side spring assist and pivoting via manual central locking * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point, and each side with 4 x 3 t lashing rings embedded in the outer frame * 4 mm floor made from high-tensile fine-grained steel ----Ramps: * Two-part mechanical grid ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm apart) Djdpstr Sucsfx Am Ssut ----Painting: * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps are hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black tone * Side panels and tipping bed painted in RAL 9010 pure white * Optional painting of side panels and tipping bed in a RAL color for additional charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 07/2026

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14,4: ----Brzda: * EBS * Núdzové uvoľňovanie pre pružinové brzdové valce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Pérovanie: * Parabolické perá s tandemovým vyrovnávacím agregátom ----Ťažné oko / Ťažná tyč: * Výškovo nastaviteľná ťažná tyč o 300 mm s 40 mm prírubovým ťažným okom ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v nákladnom aute cez EBS signál, bez potreby inštalácie na strane nákl. vozidla * 15-kolíková elektrická zásuvka * LED koncové svetlá ----Všeobecné prídavné diely: * Mechanický podperný zdvihák vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradová skrinka cca 750 x 350 x 300 mm na pravej strane * Skrutkovaný ochranný rám proti podbehnutiu Dujdpetr St Uofx Am Set * Plastové štvrť-blatníky ----Rám: * Hlavný rám z jemnozrnnej ocele ----Sklápacia plošina: * Sieťové háky po bokoch a v zadnej časti v ložiskách centrálneho zamykania, ako aj 2 ks na čelnej stene * Oceľová paletová dvojstranná sklápačka – čelná stena pevná z hladkého plechu, bočné steny s nepretržitou dĺžkou – bez stredových stĺpikov sklápateľné s pomocným zdvihom bočnice a kyvné cez manuálne centrálne zamykanie * Zadné stĺpy skrutkované * Oceľová zadná stena zasunutá pred rampy * V každom rohu 1 x 5 t upevňovacia oka a na každej strane v vonkajšom ráme 4 x 3 t upevňovacie oka * 4 mm podlaha z jemnozrnnej ocele ----Rampy: * Dvojdielne mechanické rampy z mriežkovej ocele s hliníkovou špičkou 2.150 + 1.300 mm x 600 mm (manuálne zložiteľné na 80 mm) ----Lakovanie: * Podvozok, ťažná tyč, zadné stĺpy, ochrana proti podbehnutiu, mechanické podpery a nájazdové rampy pozinkované * Nápravy, perá, vzduchové nádrže, prírubové ťažné oko a zdvihák nalakované v čiernej farbe * Bočné steny a plošina v RAL 9010 čistá biela * Lakovanie bočných stien a sklápacej plošiny v inom RAL odtieni za príplatok možné ----Informácie: * Nové vozidlo so zárukou výrobcu * Zmeny, omyly a medzipredaj vyhradené ----Doba dodania: * dostupné od 7. kalendárneho týždňa 2026

Stav: použitý, maximálna hmotnosť nákladu: 19 180 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2011, ďalšia kontrola (TÜV): 06/2023, 3-nápravový výmenný príves pre 2 kontajnery Hüffermann HMA 2424 Nosnosť: 19 180 kg Djdpfx Asu Dd Tzjm Ssut Pneumatiky: 385/65 R 22.5 Nápravy BPW Listové odpruženie Bubnové brzdy Bočný nárazový ochranný systém Zadný podbehový chránič

Stav: použitý, maximálna hmotnosť nákladu: 14 210 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2012, ďalšia kontrola (TÜV): 01/2026, * 60618-ID vozidla pre telefonické dopyty * Typ: ACF 18 AR Dsdpfxoyfzdas Am Ssut * ABS, nápravy Schmitz, kotúčové brzdy, vzduchové pruženie s možnosťou zdvíhania a spúšťania, úložný box * Pneumatiky: 1.-2. náprava: 385/55R22.5 (1. náprava: 8 / 10 mm, 2. náprava: 6 / 5 mm) ----Naša e-mailová adresa: Naša služba pre vás: - Zabezpečenie krátkodobých alebo colných značiek - Preprava / dovoz v rámci EÚ - Colné odbavenie vozidiel do tretích krajín Ak máte otázky v ruštine, môžete volať na nasledujúce číslo * WhatsApp len pre rusky hovoriacich: * Whatsapp pre anglický, nemecký a iné jazyky:

Stav: použitý, maximálna hmotnosť nákladu: 14 250 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/2006, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 180 mm, celková šírka: 2 550 mm, Výbava: ABS, Hüffermann Roll-Off Trailer HAR 18.65 2-Axle Roll Carrier Trailer Chassis for rear loading, Permissible gross weight: 18,000 kg Unladen weight: 3,750 kg Payload: 14,250 kg Axles: 2 BPW axles, Air suspension, Dujdpfxewkbqxe Am Sjt Drum brakes, Splash guards on all axles, Side underrun protection, right and left, Rear underrun protection, ABS, EBS, Duomatic quick coupling, Loading area: approx. 6,300 x 2,180 mm Container resting height (in driving position): approx. 1,360 mm External dimensions: approx. 9,200 x 2,550 mm Length without towing bar/drawbar: 6,580 mm Load securing via pneumatic low-tension locking system with 4 claws, Air suspension without lift/lowering function, Automatic lowering system: trailer lowers automatically when the air supply is disconnected from the truck, 40mm towing eye, Spare wheel holder, Tyres 385/65R22.5 Tread depth front left: 14 mm Tread depth rear left: 13 mm Tread depth front right: 14 mm Tread depth rear right: 13 mm Tow bar slightly bent

Stav: použitý, Rok výroby: 2007, farba: hnedá, celková hmotnosť: 16 000 kg, pohotovostná hmotnosť: 2 980 kg, objem nakladacieho priestoru: 45,4 m³, šírka ložného priestoru: 2 480 mm, dĺžka ložného priestoru: 7 330 mm, výška ložného priestoru: 2 500 mm, Swap body, smooth steel BDF system 7.45 m, NEW PAINT! Through-loading system: rear portal doors, used smooth steel swap body with front and rear portal doors. Through-loading system: portal doors at front and rear with external rotary bolt locks. Refurbishment: • NEW PAINT – high-gloss finish in RAL 8004 copper brown • Undercarriage sandblasted, primed, and coated with black underbody protection • New telescopic landing legs painted in RAL 9005 black Dusdpfx Aswtru Hem Set • New rubber door seals • Body completely overhauled with new UVV safety inspection • New galvanized access ladder Interior with keyhole system and lashing rings. All stated values are approximate dimensions in mm and kg. Delivery available. Offer is non-binding, subject to prior sale. Prices are net ex-works D-59558 Lippstadt-Rixbeck. You can find further equipment at . .