Müller-Mitteltal 14,4 To Tandem Tieflader 7 Mtr Mit Auffahrrampen kúpiť použité (37 803)

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 2 140 kg, maximálna hmotnosť nákladu: 12 260 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 285/ 70 R 19,5, rázvor náprav: 1 140 mm, Rok výroby: 2026, - TM-TA 14.4: - Wabco EBS (elektronisches Bremssystem) - RDÜ Reifenkontrollsystem (Reifendrucküberwachungssystem) - Notlöseeinrichtung für Federspeicherzylinder (Notlösemechanismus für die Federspeicherzylinder) - Trommelbremsen - 2 x 7 t Gigant-Achsen - Parabelfedern mit Ausgleichsaggregat - Jost-Stützwinde vorne, 2 außenliegende Fallstützen hinten - Höhenverstellbares, feuerverzinktes Zugrohr (+/- 150 mm) - Feuerverzinktes Fahrgestell - 15-poliger Stromstecker - LED-Schlussleuchten - Geschlossene Einzelkotflügel aus Kunststoff - Klappbares A-Schild hinten - Kunststoff-Rammschutzpuffer am Unterfahrschutz - Feuerverzinkter Anfahrschutz mit integriertem Kettenablagekasten (B=370 mm x T=420 mm x H=480 mm) vorne links und rechts Iajdpfx Agexu Hpljlor - Zwei steckbare Muldenanschläge zur seitlichen Zentrierung der Mulden - Vordere Muldenanschläge mit pendelbarem Anschlag, in 4 Positionen steckbar - Seitlich jeweils 2 Zurringe (UVV geprüft) à 5,3 t zum Einhängen von Spannelementen - Achsen, Federn, Luftkessel und Stützwinde in Schwarz lackiert - Änderungen, Irrtümer und Zwischenverkauf vorbehalten - Neufahrzeug mit Herstellergarantie - Lieferbar ab KW 05/2026

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge display for axle load determination (separate for two air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at the front and rear * FRP front mudguards, straight hot-dip galvanized steel skirts at the rear, each with spray protection * Reflective contour tape at side and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors * Four stake pockets per side, each with simultaneous 2 t lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and folding lashing rings, loadable in all directions and integrated in the outer frame – in the corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in the rear incline) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, folding extensions & loading ramps hot-dip galvanized Ijdpfx Agjl Tpwyoloar * Axles, turntable, air tanks etc. painted black * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at a gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou * Výškovo nastaviteľné ťažné oje o 300 mm * BPW oporný mechanizmus * Mechanické padacie oporné nohy vzadu * Plastová náradiarska skrinka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm * V rohoch pred čelnou stenou a na zadnom nosníku vždy 1 x 6,3 t kotviaci krúžok, ako aj bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené vo vonkajšom ráme Iodjwyhzvopfx Agloar * Jednodielne mechanické rampy z roštov s pružinou pre obsluhu jednou osobou, cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažné oje žiarovo pozinkované * Nápravy, pružiny, vzduchojem, predný oporný mechanizmus lakovaný v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Chyby a medziobchod vyhradené * Ihneď k dodaniu z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 8 450 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 22 420 mm, výška ložného priestoru: 1 500 mm, Rok výroby: 2024, * KA-TA-R 11,9 Masterline: * incl. 1 m mesh side extensions * EBS braking system * Emergency release device for spring brake cylinders Iajdpfx Agsp Ncl Sslsr * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Right-hand side galvanized steel toolbox * 15-pin electrical connector * Bolted underrun guard with LED tail lights * Plastic quarter mudguards * Mesh hooks on sides and rear in the central locking housing, plus 3 on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous side walls without central stanchion, foldable, with spring-assisted drop sides * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and foldable lashing point at each corner, plus 4 x 3 t on each side * Lashing rings set into the outer frame, foldable * 4 mm steel floor plate * Rear ramp mounting track * Body reinforced with load securing certificate per EN 12642 XL * 1 pair aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment beneath the load bed, integrated into the chassis * Tyres: 235/75 R 17.5 * Axles, springs, air tanks, drawbar and landing gear painted black * Side wall body colour hot-dip galvanized * 1 meter galvanized mesh side extensions * Sample images * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf, A7

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2024, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system Iedpfxjl Tq Eus Agljar * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Manometer pressure gauge for load weight determination (axle-specific, on two air suspension circuits) * Side underrun protection * Swiveling supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight galvanized steel skirts, both with spray guards * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED rear lights * Detachable beacon at the rear * Towing drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 2 x 7-pin electrical sockets * Four stanchion pockets per side, each with simultaneous 2-ton lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV folding and lowering lashing rings, loadable in all directions and recessed into the outer frame — 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3-meter overall width (except at the rear chamfer) * Widening planks stored in the center of the loading area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Load area above the kingpin: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing drawbar, folding widenings, and loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc., painted in a black tone * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, Rok výroby: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extras Equipment: - 2 spring-assisted lifts for 400 mm high steel side panels - Reinforced and certified body according to EN 12642 XL load securing certificate - 10 UVV lashing brackets integrated into the existing hole grid in the outer frame - Additional wooden floor in clamped design - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Iasdpfx Agsxcxmfolor Paintwork: - Wheels silver - Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized - Axles/springs black - Side panels RAL2011 deep orange We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping can be arranged upon request. We always keep a selection of new equipment in stock and demonstration units available. Get in touch with us! We rent out vehicles with or without drivers and machinery. A wide range of used machines and equipment is always available. Subject to technical changes, errors, and prior sale.

Stav: použitý, maximálna hmotnosť nákladu: 7 950 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2010, ďalšia kontrola (TÜV): 02/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11.000 kg Pohotovostná hmotnosť: 3.050 kg Užitočná nosnosť: 7.950 kg Celková dĺžka: 8.100 mm Dĺžka ložnej plochy: celkovo cca 6.000 mm Šírka: 2.550 mm / šírka ložnej plochy cca 2.470 mm Výška nakladania: 900 mm Ďalšie informácie - výškovo nastaviteľné oj Iajdpsx E I Utjfx Agljr - podporná noha - bočnice 400 mm, pružinové - elektrické koleso - nápravy BPW - mrežové rampy, bočne posuvné - lezecké lišty, zadná podpera - veľký upínací balík

Stav: použitý, maximálna hmotnosť nákladu: 10 100 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2001, ďalšia kontrola (TÜV): 11/2025, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 1 000 mm, celková šírka: 2 550 mm, Celková hmotnosť: 13 500 kg Prázdna hmotnosť: 3 400 kg Iodow Nu I Topfx Agloar Užitočné zaťaženie: 10 100 kg Celková dĺžka: 8 100 mm Dĺžka ložnej plochy: 6 000 mm Šírka: celková šírka 2 550 mm / šírka plošiny 2 460 mm Výška nakladania: cca 1 000 mm Ďalšie informácie - Pneumatiky 285/70R19,5 - Bočnice 400 mm, 1x delené

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped installation * Provision on the front wall for retrofitting container lock fittings * Bolted front wall made from smooth sheet metal Iodomi Tmaspfx Agloar * Split side walls made of trapezoidal-profiled steel sheet, foldable, with central drop-in stake * Steel rear wall, slide-in type between the ramps - when not in use, stowed inside at the front wall * Rear stakes, bolted * Perforated outer frame, approximately 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm possible * Load securing package: in each front and rear corner, 1 x 10 t UVV lashing ring; on each side, 2 x 8 t UVV lashing rings, retractable into the outer frame; various holes for 1.2 t lashing options in the front and rear crossmember * One-piece slide-in ramps, 12 t per pair, dimensions approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * --- Axles, air tanks, flange towing eye, and landing gear painted in black --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering system * Drawbar with 50 mm flange eye and height adjustment by 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side underrun protection Iodpfjmi Tcqox Aglsar * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation at the front wall for the retrofitting of container locks * Bolted front wall made of flat sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the center * Rear wall made of steel, slidable between the ramps (bracket for non-use located inside at the front wall) * Rear stanchions bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t drop-forged lashing rings every 600 mm * Lashing (Lasi) package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings per side in the outer frame, various holes in the front and end cross member for 1.2 t lashing options * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * --- Axles, air tanks, flange eye, and landing gear painted in a black shade --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: ----Brzdy: * EBS brzdový systém * Nouzové uvolnění pro pružinové válce * Bubnové brzdy ----Nápravy: * 2x 5,5 t BPW nápravy ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažné oko / tažná tyč: * Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem ----Obecné příslušenství: * Jost mechanická opěrná noha vpředu * vzadu 2 mechanické, žárově zinkované sklopné podpěry * Nářadový box z pozinkovaného ocelového plechu na pravé straně * Plastové čtvrtkrytky kol ----Elektroinstalace / osvětlení: * Systém pro kontrolu tlaku v pneumatikách (RDÜ) * 15 pólová elektrická zástrčka * Šroubovaný podjezdový ochranný rám s LED koncovými světly ----Sklápěcí korba: * Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně * Podvozek žárově zinkovaný * Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany * Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic * Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání * Zadní sloupek šroubovaný, žárově zinkovaný ----Zajištění nákladu: * V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t * Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy ----RAMPY: * 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje * Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou Iasdpfx Aspk D D Uegler * Vozidlo je žárově zinkováno ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL * Nové vozidlo s tovární zárukou * Změny, omyly a mezitímní prodej vyhrazeny ----Dodací lhůta: * K okamžitému odběru v Egestorf u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline: ----Brzdy: * EBS brzdový systém * Nouzové uvolnění pro pružinové válce * Bubnové brzdy ----Nápravy: * 2x 5,5 t BPW nápravy ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažné oko / tažná tyč: Isdepk D Dmjpfx Agloar * Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem ----Obecné příslušenství: * Jost mechanická opěrná noha vpředu * vzadu 2 mechanické, žárově zinkované sklopné podpěry * Nářadový box z pozinkovaného ocelového plechu na pravé straně * Plastové čtvrtkrytky kol ----Elektroinstalace / osvětlení: * Systém pro kontrolu tlaku v pneumatikách (RDÜ) * 15 pólová elektrická zástrčka * Šroubovaný podjezdový ochranný rám s LED koncovými světly ----Sklápěcí korba: * Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně * Podvozek žárově zinkovaný * Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany * Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic * Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání * Zadní sloupek šroubovaný, žárově zinkovaný ----Zajištění nákladu: * V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t * Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy ----RAMPY: * 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje * Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu ----Pneumatiky: * Pneumatiky 235/75 R 17,5 ----Lakování: * Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou * Vozidlo je žárově zinkováno ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL * Nové vozidlo s tovární zárukou * Změny, omyly a mezitímní prodej vyhrazeny ----Dodací lhůta: * K okamžitému odběru v Egestorf u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 8 670 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: Iodpjq Hg Dxefx Aglear * Height-adjustable (300 mm), hot-dip galvanized drawbar with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Tool box made of galvanized sheet steel, mounted on the right-hand side * Bolted underride guard * Plastic quarter mudguards * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipper Platform: * Lashing hooks on the sides and rear in the central locking mounts plus 3 pieces externally on the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls without central stanchion, foldable with drop-side spring lifts * Rear tailgate foldable or swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load Securing: * One 5 t recessed, foldable lashing ring in each corner * Four 3 t recessed, foldable lashing rings on each side, integrated into the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area in the chassis at the rear ----Tyres: * 235/75 R 17.5 tyres ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop-sides painted RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 600 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring actuators * Drum brakes ----Axle: * 2 x 5.5 t BPW axles Ijdpfev Dz N Aex Agloar ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Towing Eye: * Hot-dip galvanized drawbar, height-adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * At the rear, 2 mechanical hot-dip galvanized drop-down supports ----Tipping platform: * Net hooks on the sides and rear in the central locking bearings, as well as 3 units on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides without central stanchion, foldable with drop-side spring assist * Rear gate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor * Rear guide rail for loading ramps ----Load securing: * Each corner with 1 x 5 t retractable and foldable lashing ring * Additionally, each side with 4 x 3 t recessed and foldable lashing rings in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Side board painted in RAL 9010 pure white * Painting of the side walls in RAL color shade available at extra cost * Floor and front wall hot-dip galvanized ----Info: * Reinforced bodywork with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, *KA-TA-R 11.9 Masterline* ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multi-voltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at the front Isdpfx Agoq Euagjljar * 2 mechanical drop-down supports at the rear * Plastic toolbox, right side * Two-step entry on the front left (direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Lashing hooks on the sides and rear at the central locking mounts, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – no intermediate stanchions – foldable with folding wall spring lifter), tailgate can fold down and swing via manual central locking * 4 mm steel floor * Fitting rail at the rear for loading ramps ----Load Securing: * One 5 t lashing point in each corner * Four 3 t lashing rings per side, recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading bed at the rear, integrated in the chassis ----Tyres: * 385/55 R 19.5 tyres ----Paint: * Chassis, drawbar, tipper body, front wall, side boards, drop-down supports and rear stanchions hot-dip galvanized * Axles, springs, air tanks, flange eye and landing gear painted black * Side boards hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency manual release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Coupling Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange coupling eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin electrical connector * Additional 13-pin 12V cable * Extended connection cables for forestry and agricultural towing vehicles * LED taillights ----General attachments: * Mechanical support winch at the front * Two mechanical folding support legs at the rear * Side-mounted plastic toolbox on the right * Two-step front left access step (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping body: * Net hooks on the sides and rear at the central locking mounts, plus 2 on the front wall * Steel pallet 3-way tipper body (continuous side walls—no centre stakes—fold-down with side wall spring lifters, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t flush-mounted lashing rings per side in the outer frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area at the rear, integrated in the chassis Ijdpfel Thw Iex Agloar ----Tyres: * Tyres 385/55 R 19.5 ----Finish: * Chassis, drawbar, tipper body, front wall, side walls, folding support legs, and rear stakes hot-dip galvanised * Axles, springs, air tanks, flange coupling eye, and support winch painted in black * Side walls hot-dip galvanised ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 3 320 kg, maximálna hmotnosť nákladu: 10 180 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/2003, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 5 040 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19,5 148/145J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 285/70R19,5 148/145J, veľkosť zadnej pneumatiky: 285/70R19,5 148/145J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, príplatok za rampy: 800 €, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na vyžiadanie!, Viac detailov: ! Iaodpfsyy I S Ijx Agljr

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina Isdpfx Aoykxfljgloar * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT Veľmi dobre udržiavaný tandemový valníkový príves ZANDT Cargo * TAT B 110 * Valník * Spevnená drevená podlaha * Záťažové upevňovacie koľajnice * Dvojosý tandem * Široké pneumatiky * Nastaviteľné ťažné oje * Celková povolená hmotnosť 11 900 kg * Veľmi dobrý stav Možný protiúčet Financovanie od 3,99% Chyby a predaj vopred vyhradené! Údaje v tomto inzeráte sú nezáväzné a neslúžia ako garantované vlastnosti. Predávajúci nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné osobitne preveriť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celej SR na požiadanie Iodpfoymuz Uex Aglear Otváracie hodiny: pondelok až štvrtok od 9:00 - 17:00 h, piatok od 9:00 - 14:00 h a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady Iasdpfx Agoymuz Ioler * tandem s 2 nápravami * široké pneumatiky * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader / Drive-Over Platform Trailer Inquiry No.: 11630 – Vehicle available immediately from stock in Alsdorf NEW VEHICLE incl. COC * GVW: 21t, payload: 16.50t, galvanized chassis * Platform version with 400mm high front wall, ramp lock with ramp support rods and angled bracing * 21t GVW version with reinforced frame and axle, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading length with 400 mm high front wall * Extended ramps: 3 m single-piece ramps, hot-dip galvanized with galvanized grating * Ramp lifting device with vertically positioned, adjustable springs for easy one-man operation * Load securing package: - 4 UVV-certified lashing brackets (LC 8,000 daN), fitted into 45° outer frame hole pattern, positioned approx. 1m from the front/rear crossmember - 10 UVV-certified recessed lashing brackets LC 3,000 daN, foldable into the external frame - 2 UVV-certified lashing rings front/rear, recessed in crossmember, LC 10,000 daN each - Additional lashing options via 50 mm diameter holes (LC 1,200 daN) in the front and rear crossmembers * Prepared for retrofitting container locks (container locks available at additional cost) Iodpfx Aoyvxg Uogloar * Softwood floor, 50 mm thick * Gigant axles with full air suspension incl. EBS 2S/2M, lift/lower function * Tyres: 235/75R17.5 (8x), twin tires with tire pressure monitoring sensors * Plastic toolbox in front of the front wall, right-hand side (in direction of travel) * LED lighting system * 7-pin socket at rear, wired for overlength lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lamps * Oversize warning sign * 1 removable round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared wind crank ---- Hire purchase example with our partner MMV Leasing: €655/month (net), 60 months, no down payment, zero residual value Other contract terms with/without down payment/residual value available! We are an official Müller Mitteltal dealer ---- Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside office hours, appointments available by arrangement * We speak German, English, Russian, Polish, French * WhatsApp

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame ----Load Securing: Gooseneck platform: Iedpfsykx I Hjx Agljar * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML Iajdpfx Aeykx I Tegler ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: Isdpel Tilxefx Aglear ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox front right, mounted on the front bulkhead exterior ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolt-on bulkhead made of smooth sheet * Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist * Bolt-on, hot-dip galvanized rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side) * In the front and rear corners, one 6.3 t lashing ring fitted in each * Various apertures for securing options up to 1.2 t in the front and rear cross members ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under platform, integrated into the chassis ----Painting: * Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads * Board colour in RAL 9010 pure white * Side wall painting in an RAL colour tone available at extra charge ----Info: * New vehicle, not registered * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Iasdpfjyvlk Hjx Aglsr