Náves s nízkym nakladacím zariadením

Humbaur Humbaur 3-Achs Auflieger Radmulden/Lifta./Verzinkt HTS30K- Radmulden

Stav: použitý, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2024, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 25 400 mm, výška ložného priestoru: 350 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Rok výroby: 2024, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,785 mm long - Hydraulically raise/lowerable and detachable gooseneck - Technical kingpin load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and pneumatically operated locking system - Service lines are protected within the extendable beams and automatically adjust to the respective low bed length - 6 pairs of threaded blocks on the inner beam for mounting RUD bolt-on lashing rings Rear Running Gear: - Rear axle assembly with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and retaining pins for securing in the raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 Braking System: - Braking system according to EU regulations with EBS-E, without connecting lines to the tractor unit Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a two-component zinc dust primer - Rear part metallized and painted in RAL 9010 Fpjdpfx Abertqylstjp Included Accessories: - Prepared for bolt-on container positioning for one 20’ or one 40’ container on the outer beams - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized front connection bar - 2 wheel chocks with holders on the front wall - Rear steering can be controlled from the front and rear by cable remote control with push buttons, with single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed fitted with multi-couplings instead of screw couplings - Electro-hydraulic power unit - Mounting bracket for warning signs including socket on both the gooseneck and rear panel, left and right - On the gooseneck, plug-in ALU side and rear panels approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable - 5 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform, 2 pairs in the outer frame of the rear running gear - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low bed’s hook mounts - Speed stickers 80 km/h at the rear and on both sides - Mounting bracket for revolving beacon on warning signs - Radio remote control for rear steering in addition to cable remote, with LED indicator lights on the receiver for single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable pump guard - Rear excavator bucket recess covered at the back with a plug-in plate

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 190 mm, šírka ložného priestoru: 2 550 mm, Výbava: ABS, Dostupnosť: približne 4 mesiace po obdržaní objednávky Kässbohrer 3-nápravový nízkoložný náves s kolískami na kolesá, výsuvný / rozťahovateľný, NOVÉ VOZIDLO Nápravy / Brzdový systém: - BPW nápravy s bubnovými brzdami 17,5" - 3. náprava je natáčacia smerom dozadu - 1. náprava je zdvíhacia - Brzdový systém WABCO 4S/3M - 13 x Continental HTR 2 245 / 70 / 17.5" na oceľových diskoch Nízkozdvižný náves: Fpedegimywspfx Abtep - Výška sedla: 1.250 mm - Dĺžka ložnej plochy: 9.240 mm + 3.500 mm výsuvná - 9 x 2 upevňovacie oká (6 t) v vonkajšom ráme - 2 x 2 upevňovacie oká (6 t) v oblasti krku - 4 x 2 upevňovacie oká (6 t) na ložnej ploche nízkeho loža - Vyťahovateľné postranice pre nadmernú šírku 300 mm - Podlaha z tvrdého dreva, hrúbka 45 mm - Farba: MB 7350 novagrau alebo RAL 3020 dopravná červená - Vanička na rameno bagru Najazdové rampy: - Hydraulicky posuvné rampy s podlahou z tvrdého dreva, hr. 40 mm - 4.200 mm dĺžka x 850 mm šírka x 11° najazdový uhol - Elektrohydraulické čerpadlo 2 kW - Zásuvka NATO na napájanie elektrohydrauliky vrátane kábla Ostatné: - 4 x tabule pre nadrozmerné vozidlá s držiakom na výstražné majáky - 1 x náradová skrinka na pravej strane v smere jazdy - JOST kompletná podpera vpredu - Manuálna zadná podpera, pozinkovaná - 2-palcový kráľovský čap - 24V svetelný systém Aspöck - Držiak rezervného kolesa s rezervou ---- Zmeny, omyly a medzičasný predaj vyhradené! Miesto: KTH-Trailer GmbH, 47574 Goch / Nemecko.

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform Fpedpehlz R Ssfx Abtop - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, konfigurácia náprav: 3 nápravy, Výbava: ABS, Availability: Approx. 4 months after receipt of order! Kässbohrer 3-Axle Low Loader Rigid / Non-Extendable NEW VEHICLE Axles / Brake System: - BPW axles with 17.5" drum brakes - 3rd axle as trailing steering axle - 1st axle as lift axle - WABCO brake system 4S/3M - 13 x branded tyres 245/70/17.5" on steel rims Low Loader: - Fifth wheel height: 1,250 mm Fodpfx Ajht Tt Hebtopp - Low bed length: 9,240 mm - 7 x 2 stake pockets 52 x 102 mm - Lashing rings on gooseneck: 1 x 2 10t, 2 x 2 5t - Lashing rings on rear platform: 3 x 2 10t, 4 x 2 5t - Removable side extensions for overwidth, extendable by 300 mm - Hardwood floor 45 mm - Colour: RAL 3020 Traffic Red Ramps: - Hydraulically adjustable ramps with 40 mm hardwood cover - 4,200 mm long x 850 mm wide x 9° ramp angle - Electrohydraulic pump 2kW - NATO socket for electrohydraulic system operation incl. cable Miscellaneous: - 4 x overwidth signs with holder for beacon - 1 x toolbox on right-hand side in direction of travel - JOST heavy-duty landing gear at front - Manual rear supports, galvanised - 2-inch king pin + 2nd mounting position for king pin - 24V Aspöck lighting system - Spare wheel carrier with spare tyre

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear Fjdpek Aht Uofx Abtjpp - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° Fodpfx Aboiu Er Ajtepp - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, Funkcionalita: plne funkčný, výkon: 55 kW (74,78 k), typ paliva: nafta, farba: červená, celková hmotnosť: 16 700 kg, stav pohonu: 100 percento, stav reťaze: 100 percento, Rok výroby: 2022, Výbava: Kontrola bezpečnosti UVV, Mobilný triedič Terex® Finlay 860 je kompaktný a výkonný ťažkotonážny preosievač orientovaný dopredu. Toto mimoriadne univerzálne a flexibilné zariadenie dosahuje vynikajúce výkon pri primárnom a sekundárnom preosievaní, napríklad pri spracovaní kameniva, piesku a štrku, ornice, stavebnej sutiny a v recyklačných aplikáciách s obmedzeným pracovným priestorom. Plnohodnotné, samostatne pracujúce zariadenie je možné hydraulicky sklopiť a pripraviť na transport za menej ako 30 minút. Zariadenie môže byť podávané drvičom, triedičom alebo nakladačom, čo z neho robí ideálny stroj pre zákazkové triedenie a menších prevádzkovateľov. - zásobník 2,9 m³ Fpodpfx Aevygbcsbtsp - horné sito 2,77 x 1,22 m - dolné sito 2,68 x 1,22 m - celková triediaca plocha 6,7 m² - šírka hlavného dopravníkového pásu 1 000 mm - výška odkladania materiálu 3 030 mm - šírka bočných pásov (jemná a stredná frakcia) 650 mm - výška odkladania materiálu cca 3 640 mm - šírka pásov podvozka 400 mm Transportné rozmery: 9,20 x 2,50 x 3,10 m Hmotnosť: cca 16 700 kg Táto ponuka je nezáväzná. Za úplnosť údajov nezodpovedáme. Zmeny, omyly a medzipredaj vyhradené!

Stav: nový, pohotovostná hmotnosť: 5 680 kg, maximálna hmotnosť nákladu: 18 320 kg, celková hmotnosť: 24 000 kg, dĺžka ložného priestoru: 7 200 mm, šírka ložného priestoru: 2 480 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 r17,5, Rok výroby: 2023, Výbava: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 driving heights Lowering function for safe loading Brake system according to EC regulations with 2S/2M Drawbar with 50 mm towing eye Fpodpfx Abjh I H Ddetjp Raising and lowering of the drawbar 8 pairs of recessed lashing rings (10 t) in the low-bed area 6 pairs of lashing points (2 t) above the wheel cutout 5 pairs of lashing/rung pockets (3 t) for stanchions 90x50 mm 50 mm softwood flooring Chassis frame hot-dip galvanized by immersion Foldable side underrun protection Rung pocket package in the outer frame One-piece hot-dip galvanized loading ramps Laterally adjustable Direct-acting upright spring balancers

Stav: nový, pohotovostná hmotnosť: 10 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17,5, Výbava: ABS, | Humbaur HTS30K low loader, new vehicle | 1st axle liftable, 3rd axle with trailing steering | Front wheel recesses (top): 2,500 mm length, 390 mm depth | Rear wheel recesses (top): 1,280 mm length, 320 mm depth | Excavator trough dimensions: 2,700 mm x 750 mm x 1,895 mm | Chassis frame hot-dip galvanized | Ramps: 3,100 mm x 750 mm | Low bed length: 8,400 mm | Width: 2.54 m | High bed width: 2.47 m | King pin adjustable by 340 mm | SAF axles with drum brakes | Unladen weight: 10,100 kg | Gross weight: 48,000 kg | Technical gross weight: 51,000 kg | 235/75/R17.5 twin tires | Hydraulically laterally adjustable ramps | Hydraulic rear supports | Coupling height: 123 cm | Subject to input errors, mistakes, and prior sale Fpodpfxovx Tg As Abtep

Stav: nový, maximálna hmotnosť nákladu: 37 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2024, * TS 3 RM 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lifting and lowering system as well as Return-to-Ride (RtR) valve * Last axle configured as trailing-steer axle with electro-pneumatic steering lock * Side underrun protection * Support legs in front and swing-out supports at the rear of the chassis Fpjdpel Tiiyofx Abtep * 15-pin electrical socket * LED tail lights * Mechanically adjustable warning sign packages at front and rear * Rotating beacon (removable) at rear left * Straight steel fenders * Spare wheel holder in front of the front wall cross member (without spare wheel) * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high, drop-side aluminum boards (RAL 9010) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- fitted in high position * Rear ramping on the saddle platform to the low bed, approx. 700 mm long, each with one recessed lashing ring * Saddle platform with 50 mm clamped wooden planks and low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9x mechanical folding extensions for up to 3 m overall width, not in the rear slope (extension planks included with closed storage box transverse to driving direction under the loading area) * Two lashing rails per side recessed in the outer frame of the saddle platform, three lashing rings per side in the low-bed platform as well as an additional center rear lashing ring at the rear cross member, two 5 t lashing rings per side each bolted at the lower edge of the wheel recess outer frame, * Two 6.4 t UVV-rated lashing rings per side in the excavator arm recess * Excavator arm recess from end of last rigid axle, over steering axle up to rear cross member, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm * Two wheel recesses per side, 390 mm deep and 640 mm wide, with sliding cover for transporting wheel loaders with wheelbase from 3,120 to 3,620 mm; front recess lower part inclined upwards 1,100 mm over 2,050 mm length, rear recess lower part inclined upwards 580 mm over 1,550 mm length * Hydraulically operated folding ramp with extendable tip section, approx. 4,650 x 720 mm, including load holding valves and lateral hydraulic ramp shift * The outer plank on the access ramp is made of 50 mm hardwood * Loading area above the slewing ring: approx. 3,950 x 2,480 mm * Loading height unladen: approx. 1,470 mm * Lower loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) * Chassis, rear folding supports, ramps, mechanical folding extensions hot-dip galvanized * -- Axles, springs, air tanks painted in a shade of black -- * Suitable for 2- and 3-axle tractors * Saddle height: approx. 1,220 mm * Tyres: 235/75R17.5 * Permissible gross weight technically feasible up to 48,000 kg * Vehicle is hot-dip galvanized * Sideboard paint finish in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf