Nízkozdvižný príves

MÜLLER-MITTELTAL T 3 Profi 30,0

Stav: použitý, maximálna hmotnosť nákladu: 18 150 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2023, ďalšia kontrola (TÜV): 10/2026, dĺžka ložného priestoru: 8 300 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS * 5-komorové zadné svetlá * Duomatik vzduchová prípojka * Gigant nápravy * Zadná podpera ----Nadstavba: Nízkozdvižný príves (1800+6500mm)/Nakladacia výška cca 920mm, zozadu skosený/Nábehová výška cca 770mm, oceľovo-drevená podlaha, hydraulické nájazdové rampy (pozinkované), nosnosť 15 000 kg/rampa, kotviace oká + krúžky Dsdpfx Aszaln Soagokp Predaj len podnikateľom. PRI EXPORTE SA PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE SÚ BEZ ZÁRUKY VRÁTANE VÝBAVY A DOPLNKOV. Základom všetkých kúpnych zmlúv, faktúr, predfaktúr, objednávok a obchodných rozhovorov sú naše VOP (podrobnosti v tiráži).

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights Dodpfxjl Tpwyj Aagskp * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical connectors * Four stake pockets per side, each with dual 2 t lashing points * Load security package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – in the corners up to 13.4 t, elsewhere up to 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm), adjustable sideways * Excavator arm trough from rear axle to rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty Dodpfjl Tq Eusx Aagokp * Errors and prior sale excepted * Available from approx. week 32/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization Dkodpfsl Thxdox Aagsp * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone Djdpfjl Th Adox Aagjkp * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ systém kontroly tlaku v pneumatikách * Nouzové odpojení pro válce s perovým akumulátorem * Bubnové brzdy * 3 x 11 t BPW Eco nápravy * Parabolické pružiny * Mechanické vyrovnání náprav vzadu * Boční ochrana proti podjetí * Otočné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední uzavřené plastové blatníky a rovné zadní pozinkované ocelové kryty s ochranou proti odstřikování * Konturovací páska po stranách a vzadu, reflexní * Výklopné víko (žárově zinkované) na skříňku na nářadí v platformě podvozku * Multinapěťová instalace * LED zadní světla Djdpfx Ajx Ipa Noagokp * Výstražné světlo (odnímatelné) vzadu * Tažná oj s okem 40 mm a nastavitelnou výškou pomocí tažné pružiny a napínáku * 15-pólová elektrická zásuvka * Po stranách vždy 4 kapsy na kolíky (bez kolíků), současně možnost zajištění nákladu * Balíček zajištění nákladu (La-Si) obsahuje: 2 oka (6,4 t) vpředu vlevo a vpravo na hlavním rámu platformy, 5 párů UVV otočných a sklopných vázacích ok, zatížitelných ve všech směrech a zapuštěných do vnějšího rámu – v rozích 13,4 t, jinak 10 t * 6 párů mechanických sklopných ramen pro celkovou šířku 3 m (ne ve zkosení vzadu) * Rozšiřovací desky uložené uprostřed ložné plochy * Odkládací plocha pro rameno bagru přes zadní nápravu až k zadnímu nosníku, délka cca 2 100 mm (2 páry vázacích ok 6,4 t po stranách odkládací plochy) * Mechanicky jednodílné nájezdové rampy s pružinovým mechanismem (cca 3 000 x 720 mm) * Mechanicky posuvné boční rampy * Ložná plocha nad otočnicí: cca 1 960 x 2 520 mm * Ložná výška nenaloženého vozu cca 1 070 mm * Zadní ložná plocha: cca 6 500 x 2 520 mm * Ložná výška nenaloženého vozu cca 910 mm (včetně 860 mm nájezdového zkosení) * Podvozek, otočný rám, tažná oj a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové válce atd. lakované černou barvou * 235/75 R 17,5 dvoumontáž kol * Pohotovostní hmotnost 5 900 kg * --technicky možné celkové povolené zatížení 30 000 kg-- * Vozidlo je žárově zinkované * Nové vozidlo s tovární zárukou * Změny a meziprodej vyhrazeny * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle Dkedpfsx Ipbgex Aagep * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector Dkjdpfxjx Ipb He Aagop * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets, front and rear * VA: closed plastic fenders; HA: straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye, height adjustment via draw spring & turnbuckle * 15-pin power connector Dkedpox Ipavsfx Aagep * Four stake pockets on each side (stakes not included), with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t), front left & right on the main frame of the bogie platform; 5 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, flush-mounted in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear incline) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the excavator arm storage) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available from Egestorf

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, 3 nápravy, SAF nápravy, otočný záves, listové pruženie, ABS (protiblokovací systém), viazacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná opora, bočná hliníková ochrana, zdvojené pneumatiky, odkladacia schránka Nadstavba: 3-nápravový podvalník s hydraulicky sklopnými a bočne posuvnými dvojdielnymi rampami, pozinkované rampy, 3x 10t SAF nápravy, bubnové brzdy, výrez na rameno rýpadla, 50 mm ťažné oko! Dkedpfx Aajy R Ekiogop Vrchné plato cca 1500 mm, spodné plato cca 6300 mm! Dĺžka rampy cca 4200 mm! Za príplatok je k dispozícii aj vhodná 40 mm oje! ÚDAJE O VÝBAVE BEZ ZÁRUKY, zmena, medzi-predaj a chyby vyhradené!