Sklápací náves

FLIEGL Stahlhalbschalenmulde 3x9 DHKS 390/ 24 cbm

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon Redsk Aht Ujpfx Am Hjch

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): Rcedpfoup U Hzsx Am Hjh - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 2 410 mm, výška ložného priestoru: 2 300 mm, objem nakladacieho priestoru: 54 m³, Rok výroby: 2025, Výbava: ABS, !!NA PREDAJ, NA PRENÁJOM ALEBO PO DOHODE PRENÁJOM S MOŽNOSŤOU ODKÚPENIA!! cca 52 m³ Hliníkový obilný sklápač — * Výrobca: Benalu * Typ: obilný sklápací náves * Rok výroby: NOVÉ VOZIDLO * Objem: cca 54 m³ (9,50m dĺžka x 2,41m šírka x 2,30m výška) * Technická celková hmotnosť: 39 000 kg * Pohotovostná hmotnosť: cca 5 600 kg * Nápravy: 3x nápravy / kotúčové brzdy * Pneumatiky: 385/65 R22,5 na hliníkových diskoch Speedline * Pruženie: vzduchové s funkciou zdvíhania a spúšťania * EBS Wabco * Kombinované dvere (krídlové dvere a kyvná klapka) * Pneumatické odistenie kyvnej klapky pri vyklápaní * 2x obilné šupátka * Podlaha 5mm * Jednotlivé blatníky * Oporný stojan pre prázdny náves * Sklopná ochrana proti podbehnutiu * Manometer nakládky * Ovládacia plošina vpredu * Rolovacia plachta Rcsdstf Sahopfx Am Hoh * Skrinka na náradie Nemecké vozidlo!! Nemecké doklady!! NA PREDAJ, NA PRENÁJOM ALEBO PO DOHODE PRENÁJOM S MOŽNOSŤOU ODKÚPENIA!! Použité sú ilustračné fotografie (archívne zábery)!!

Stav: použitý, číslo stroja/vozidla: WG0STZV3580030272, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2009, celková dĺžka: 16 500 mm, celková šírka: 2 550 mm, celková výška: 1 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R17.5, farba: iný, Rok výroby: 2009, Chassis Kingpin diameter / Fifth wheel: 2 inch Structure Fifth wheel height: 120 cm Special Transport Length over axles: 410 cm Load floor length: 800 cm (removable floor 760 cm) Gooseneck length: 375 cm Low-loader: ✓ Maximum width: 250 cm Max. length: 1360 cm (extends 560 cm) Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle brand: Bpweco Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steering; Tyre tread left outer: 75%; Tyre tread right outer: 45% Axle 2: Twin tyres; Steering; Tyre tread left outer: 40%; Tyre tread right outer: 60% Axle 3: Twin tyres; Steering; Tyre tread left outer: 65%; Tyre tread right outer: 60% Weights Unladen weight: 19,000 kg Payload: 35,000 kg Gross vehicle weight (GVW): 54,000 kg Rsdpsu H Hu Tofx Am Hsch Identification Registration number: C271731 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stav: použitý, číslo stroja/vozidla: N020610, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/1993, celková dĺžka: 14 900 mm, celková šírka: 2 500 mm, celková výška: 2 500 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70 R17.5, farba: iný, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Riadiaca os = Poznámky = Podvozok Priemer čap spojky / sedlovej spojky: 2 palce Výška čapu spojky / ojnice: 120 cm Bubnová brzda: ✓ Špeciálna preprava Odnímateľná ojnica: ✓ Rodpfxoy H Dpve Am Hoch Dĺžka medzi osami: 450 cm Dĺžka ložnej plochy: 560 cm Dĺžka ojnice: 350 cm Maximálna šírka: 250 cm Rozšíriteľné: × Výsuvné: ✓ = Ďalšie informácie = Všeobecné informácie Rok výroby: 1993 ŠPZ: OL-48-FZ Konfigurácia osí Rozmer pneumatiky: 245/70 R17.5 Značka osí: Bpw Brzdy: bubnové brzdy Odpruženie: hydraulické odpruženie Predná os: Dvojité pneumatiky; riadená; stav dezénu pneumatiky vľavo vonkajšie: 20 %; stav dezénu pneumatiky vpravo vonkajšie: 30 % Stredná os: Dvojité pneumatiky; riadená; stav dezénu pneumatiky vľavo vonkajšie: 25 %; stav dezénu pneumatiky vpravo vonkajšie: 20 % Zadná os: Dvojité pneumatiky; riadená; stav dezénu pneumatiky vľavo vonkajšie: 25 %; stav dezénu pneumatiky vpravo vonkajšie: 20 % Hmotnosti Vlastná hmotnosť: 19 130 kg Maximálna nosnosť: 28 870 kg Celková hmotnosť: 48 000 kg = Informácie o firme = Pre viac informácií o tomto zariadení nás prosím kontaktujte telefonicky na čísle: alebo e-mailom na adrese: . Kompletný prehľad aktuálneho stavu zásob nájdete na: . Nezabudnite sa prihlásiť na odber nášho newslettera, aby ste dostávali týždenné aktualizácie o našich zásobách.