Nízkopodlažný náves

DOLL T2P-S3FS21 NEXT

Stav: nový, maximálna hmotnosť nákladu: 44 000 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Ďalšie informácie tu: Nsdpfjv D Abtox Am Hjwn

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm Nwodpfohlz S Njx Am Hen •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: použitý, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 29 700 kg, celková hmotnosť: 41 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2006, zavesenie: vzduch, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký náves * Špeciálny nízkoložný príves na prepravu úžitkových vozidiel a stavebných strojov * Vyrobený prémiovým výrobcom Estepe z Holandska (Estepe typ E0PL 24-41) * Vďaka dlhoročným skúsenostiam s výrobou takýchto špeciálnych nízkoložných prívesov na prepravu nákladných vozidiel a stavebných strojov boli zohľadnené všetky detaily * Samozrejme s výsuvným hlbokým ložiskom, hydraulickými rampami a hydraulickou plošinou * Špeciálny navijak s diaľkovým ovládaním atď. * Nápravy BPW * 3. náprava – zdvíhacia náprava * Vzduchové odpruženie s funkciou zdvíhania/spúšťania * Centrálne mazanie * Celková povolená hmotnosť: 41 000 kg * Pohotovostná hmotnosť: 11 300 kg * Užitočné zaťaženie: 29 700 kg Ak si želáte nové STK, radi Vám pripravíme ponuku od našich partnerských dielní. Naša ponuka je všeobecne BEZ novej STK, bez nového DGUV, bez novej SP, bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej domovskej stránke na Hovoríme nasledujúcimi jazykmi: nemecky, anglicky, poľsky, turecky Upozornenie: Ponúkame a dôrazne odporúčame obhliadku a prehliadku tovaru, aby nevznikli nesprávne predstavy o jeho stave a vhodnosti zo strany kupujúceho. Obhliadka a prehliadka sú kedykoľvek možné po dohodnutí termínu a sú výslovne žiadané. Nwedortbb Sepfx Am Hon Všetky uvedené údaje sú bez záruky. Za chyby alebo nesprávne údaje v ponuke neručíme. Kupujúci je povinný sám sa presvedčiť o stave a výbave tovaru/vozidla. Zmeny, predbežný predaj a omyly vyhradené.

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions Nedpfx Aok Aht Usm Hown - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Njdpfx Ajiu Etkjm Hown Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: YV2ASW0G99A684509, najazdené kilometre: 442 321 km, prvá registrácia: 05/2009, typ paliva: nafta, pohotovostná hmotnosť: 23 965 kg, maximálna hmotnosť nákladu: 20 035 kg, celková hmotnosť: 44 000 kg, veľkosť pneumatiky: 315/80R22,5, stav pneumatík: 50 percento, konfigurácia náprav: 8x4, rázvor náprav: 3 206 mm, vzdialenosť náprav: 3 206 mm, palivo: nafta, brzdy: iný, farba: červená, kabína vodiča: denná kabína, typ prevodu: automatický, počet prevodových stupňov: 12, emisná trieda: Euro 5, zavesenie: parabolický list (pružina), počet sedadiel: 2, Rok výroby: 2009, Výbava: ABS, AdBlue, Tachograf, airbag, elektrické ovládanie okien, hmlové svetlá, klimatizácia, palubný počítač, posilňovač riadenia, prípojné zariadenie, registrácia nákladného vozidla, registrácia vozidla, systém kontroly trakcie, tempomat, uzávierka diferenciálu, žeriav, Vozidlo so zabudovaným HDS PALFINGER PK60002 Performance + PJ170. Nosnosť 19,5 tony. 5 + 4 segmenty + otáčavý rotátor. HDS prešiel dôkladným servisom. Nové brzdové doštičky na všetkých nápravách. Vozidlo pripravené na prácu. Poistenie platné do júla 2026. TK platná do februára 2027. Nedoym U Iuspfx Am Hown

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels Nwsdoxarl Njpfx Am Hjn - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck Njdpoiu Er Aofx Am Hewn - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: použitý, najazdené kilometre: 599 400 km, výkon: 355 kW (482,67 k), prvá registrácia: 05/2019, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, brzdy: retardér, farba: strieborný, typ prevodu: automatický, emisná trieda: Euro 6, Rok výroby: 2019, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, nezávislé kúrenie, sadzový filter, DAF XF 480 – KLIMATIZÁCIA – TEMPOMAT – RETARDÉR – SYSTÉM NA UDRŽIAVANIE V DRÁHE – HISTÓRIA VOZIDLA * 1. MAJITEĽ * NEMECKÉ VOZIDLO * NA POŽIADANIE K DISPOZÍCII VIDEO ----Technické údaje vozidla* DAF XF 480 FT * Ťahač * 2 nápravy * 2 nádrže * Rázvor cca 3,55 m Náprava 1* Listové pruženie * Pneumatiky: 355/50 R22.5 Náprava 2* Dvojité pneumatiky * Vzduchové pruženie * 4 vzduchové vaky * Pneumatiky: 315/60 R22.5 Prevodovka a komfort jazdy* Automatická prevodovka * Retardér * Tempomat * Asistent pri rozjazde do kopca * Kontrola trakcie (TC) Bezpečnostné a asistenčné systémy* Asistent na udržiavanie v jazdnom pruhu * AEBS – systém núdzového brzdenia * Systém na regeneráciu DPF Kabína a komfort* Vyhrievané sedadlá * Samostatná klimatizácia * Nezávislé kúrenie * Elektrické okná * Vyhrievané vonkajšie spätné zrkadlá * Multifunkčný volant Nsdpfx Ajzz Efxjm Hown * Kožený volant * 1 x ležadlo ----* EXPORT – PREDAJ IBA S KAUCIOU (ZÁLOHOU) MIN. 500 € * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € EXPORTNÉ PRIHLÁŠENIE, COLNICA EXW DO 10 MINÚT (AUTHORIZOVANÝ EXPORTÉR), 5 DNÍ, 15 DNÍ, 30 DNÍ – ŠPZ A 15 DNÍ – ŠPZ RAKÚSKO EURO 1 TECHNICKÝ LIST (DATA TECNICI) – REZERVÁCIE VOZIDLA UŽ LEN PROSTREDNÍCTVOM E-MAILU ÚSTNE REZERVÁCIE NIE SÚ PLATNÉ Pri predaji do krajín EÚ a mimo EÚ sa vyžaduje kaucia vo výške minimálne 500,00 € / 1 000,00 €. Zmeny, chyby a predaj vyhradené! Ďalšie vozidlá nájdete na našej Predaj sa uskutočňuje výhradne na základe našich Všeobecných obchodných podmienok – pozrite si na našej webovej stránke. Dôležité upozornenie – Dôležité informácie: Napriek dôkladnej kontrole všetkých detailov v našej ponuke sa môže stať, že sa vyskytnú chyby. Čiastočne sú tieto chyby spôsobené chybami pri prenose údajov v systémoch rôznych poskytovateľov platforiem. Preto by sme vás chceli upozorniť, že všetky údaje sú uvedené bez záruky a nepredstavujú žiadny právny nárok. Právne: Táto ponuka nepredstavuje ponuku v zmysle §145 BGB. Ide skôr o informácie na účely začatia zmluvných vzťahov. Tu uvedené informácie sú uvedené bez záruky a teda nepredstavujú záväzné vlastnosti.

Stav: použitý, najazdené kilometre: 738 234 km, výkon: 324 kW (440,52 k), prvá registrácia: 07/2012, typ paliva: nafta, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, brzdy: retardér, farba: zelený, typ prevodu: mechanický, emisná trieda: Euro 5, Rok výroby: 2012, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, nezávislé kúrenie, Žeriavový ťahač MAN TGX 26.440 6X2 Euro5 EEV s retardérom, dvojokruhovou hydraulikou Nedpfjnwggpjx Am Hown Náves: Meusburger MPS-2 s riadenými nápravami vybavený žeriavom Palfinger PK 26002-EH s 4 výsuvmi, nosnosť 5 500 kg pri 4 m, 1 750 kg pri 12 m, diaľkové ovládanie Stav: veľmi dobrý, pravidelne servisovaný, platná technická prihláška (STK) Pneumatiky: 70–95%