Nízkopodlažný náves na prepravu stavebných strojov

Faymonville 3-A-Semi-Ladebo.-abklappba.-Heck-Hilfsle

Neck (Schwanenhals):
- Neck in SNT design for optimization of the loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6°
- For tractor units: 4 x 2 and 6 x 2

Loading Platform:
Njdpfoyw Sakex Ab Nocp
- Loading platform, length approx. 9,700 mm, with hydraulically foldable and extendable rear section as well as hydraulically liftable deck at the front for accessing the gooseneck

Axles and Tyres:
- BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering
- 3rd axle with electromagnetic reverse lock, activated automatically when reversing and manually
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5 3PMSF twin tyres
- TPMS tyre pressure monitoring system according to ECE R 141

BPW Auto Reverse Control:
- Electro-hydraulic auxiliary steering for the trailing axle of a 3-axle assembly
- Automatic control of the self-steering axle during reversing via gyroscope sensor
- Manual control of steering in forward and reverse using a separate radio remote control
- Manual operation enabled up to 10 km/h
- Power supplied by a separate electro-hydraulic unit

Accessories Included:
- Removable steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic power unit
- Outer beams on the neck with fixing holes for screwable lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- One fixing hole in the rear upper area of the outer beams on the neck for a screwable lashing ring
- Grating surface with 5 mm sheet metal reinforcement on the neck and rear taper
- 2" king pin
- Neck guide plate for the fifth wheel, approx. 500 mm wide
- Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
- On the neck: one pair of plug-in aluminium side boards, approx. 400 mm high, anodized
- 4 wheel chocks
- Electric cable winch, approx. 5,400 kg pulling force, with remote control
- Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable press roller
- Winch mounted inside the front of the neck
- Continuous grating surface with 5 mm sheet metal base as additional reinforcement, designed for point loads:
- on the lift bed
- on the loading platform
- on the hydraulically lowerable rear area
- Painted sand coating on the neck covers and in the transitional areas between neck and lift bed, lift bed and loading platform, as well as loading platform and ramps
- 1 spare wheel
- Hydraulic lift bed, length approx. 2,500 mm, load capacity in driving position raised: 9,000 kg
- The hydraulic cylinders are secured with load-holding valves
- Recesses in the outer frame of the platform and lift bed for attaching tensioning straps
- Extensive lashing points
- Hydraulically lowerable rear for loading and unloading, and can be raised to shorten overall train length
- Load capacity in horizontal driving position: 10,000 kg
- Shortening of total trailer length when raised: 2,350 mm
- Painted sand coating on the entire ramp, except for the extendable galvanized ramp section
- Hydraulically extendable rear extensions for loading and unloading
- Radio remote control:
- Operation of the hydraulic lift bed
- Operation of the hydraulic lift system for rear extension
- Operation of the hydraulic extension of the rear section
- 1st axle with traction aid
- Central lubrication system with 1 pump
- 4 warning boards, approx. 423 x 423 mm, extendable

Inzerát bol automaticky preložený. Chyby v preklade sú možné.