Sklápací náves

SCHMITZ CARGOBULL S3D Getreidekipper Liftachse Rollplane*NEU* 52m³

Stav: nový, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 500 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 1 900 mm, objem nakladacieho priestoru: 56 m³, Výbava: ABS, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension 430 mm disc brakes. Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, 1st axle liftable with traction aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, BVA brake wear indicator Tyres and wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers, choice of manufacturer, with steel rims 11.75 x 22.5 ET 120 Landing gear Mechanical type with single-sided operation, 2-speed, with swivelling foot for air suspension Brake system According to E.G. standards, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air reservoir system Electrical system According to German road traffic licensing regulations (STVZO), with 2 five-chamber lights Aspöck Ecopoint 2 type, 24-volt system with 2x7 and 1x5 pin sockets, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipper body / Tipper trough, inner structure fully welded Aluminium trough, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall 4 mm reinforced, straight design. Rear wall as universal door, straight version with 2 hinged doors in 2/3-1/3 design with one grain chute, or alternatively 1/2-1/2 design possible, each with a grain chute. ALU round profile welded to seal the door gap at the rear doors (sides and bottom). Rear doors partially covered in smooth aluminium. Universal door operated pneumatically, can be locked with separate lever. Rear stanchion in aluminium, swing-out. Two hold-down devices with rubber buffers attached to the front wall for the tipper trough to frame. Hydraulic system for the tipping cylinder with large cover Hydraulic cylinder mounted on front wall, max working pressure 150 bar, make Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete mud flaps over entire vehicle width attached to underrun protection, ALU spare wheel holder, foldable side underrun protection right, large type 860 toolbox, approx. 3 m aluminium ladder, 3 central aluminium swing stanchions approx. 150 mm raised, additional central stanchion mount allows positioning of total of 2 stanchions to increase loading width, rolling tarpaulin with central light strip and reinforced in abrasion zones, approx. 660 g/m2 quality, rolling tarpaulin system, circumferential rubber rope at the rear end of tarpaulin with two tension hooks on the rear swing stanchion, walkway on chassis in chassis colour, tarpaulin lock with quick-release fastener, rear tarpaulin seal with welded-in rubber cord to prevent water ingress, robust foldable underrun protection with two towing eyes left and right incl. pre-insertion pins, 2 "Clear-Pass" flaps on mudguards to EC standard, side-mounted ALU grain funnel with plan sack, holders for shovel, broom and scraper mounted above the axles, etc. +590 € delivery costs Available in 50m³ - 56m³ 9,700 mm and 10,500 mm loading compartment length *Price varies depending on equipment* Njdpfx Ajfi Nmusgnewb

Stav: použitý, pohotovostná hmotnosť: 5 790 kg, maximálna hmotnosť nákladu: 32 210 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2014, zavesenie: vzduch, veľkosť pneumatiky: -, Rok výroby: 2014, Výbava: ABS, ref: VO25-2004 NA PREDAJ? Sklápací náves TECNOKAR T3P • 3 nápravy • Celková hmotnosť 38 t • 2014 • Červený Značka: TECNOKAR Model: T3P • Sklápací náves Rok výroby: 2014 VIN: ZLK3TP380ES00 Farba: červená Typ: Zadný sklápací náves Nápravy: 3 nápravy Celková hmotnosť: 38 t Pneumatické odpruženie Brzdy: Kotúčové s ABS / EBS Celkový stav: Veľmi dobrý, pripravený na prácu TECHNICKÉ ÚDAJE Zosilnený rám pre stavebné použitie 3 nápravy Pneumatické odpruženie Brzdy ABS/EBS Nwjdpex Emnlefx Agnjb Sklápačka Zosilnená oceľ odolná proti opotrebeniu Robustná konštrukcia pre vysoké zaťaženie Zadné vyklápanie Zosilnené steny a podlaha pre intenzívne využitie Kolesá Pneumatiky 385/65 R22.5 Blatníky a ochrana proti podbehnutiu podľa CE Kapacity Celková hmotnosť: 38 t Prevádzková hmotnosť: 5 790 kg Užitočné zaťaženie: cca 32 210 kg Zdvihateľná náprava Plocha: 21,3435 m² Šírka: 2,55 m Korpus: oceľ Dodacia lehota (v dňoch): 1 ABS Sériové číslo: ZLK3TP380ES00

Stav: použitý, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Schmitz Cargobull SKI 24 SL 10.5 scrap tipper body * RENTAL * Scrap tipper body 55.5 m3 Nwedpfx Agjv Ttx Uonjb * SCB axles * Swing doors * Air suspension * Air control * Lift axle * Sliding tarpaulin * 3 crossbeams for added stability * Load pressure gauge * Automatic lowering during tipping operation * ISO air couplings with red and yellow coupling heads * 2 x 7-pin electrical connections * 15-pin electrical connection * ABS connection * Platform on front wall * Folding underrun protection * Disc brakes * LED lights Rental possible! Interim sale and errors explicitly reserved! Sale exclusively according to our terms & conditions Important information: Despite thoroughly checking all details in our offer, errors may occur. Some errors may result from data transmission by various platform providers. Therefore, please note that all information is without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Instead, it provides information on contract initiation. The details provided here are without guarantee and do not represent warranted characteristics.

Stav: použitý, maximálna hmotnosť nákladu: 33 707 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 8 912 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 2 285 mm, objem nakladacieho priestoru: 50 m³, celková šírka: 2 550 mm, celková výška: 3 672 mm, Rok výroby: 2025, Výbava: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous 6 mm Hardox steel HB450 floor 4 breaker bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, internal ladder Deflector plates along the entire length of the side wall (for mudguard protection) Hydraulic tailgate (with pendulum function) HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x pneumatic vibrators under the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with starting aid Nwedpfx Agoxriu Ejnob WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium folding ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available from us immediately as a FULL-SERVICE RENTAL-----

Stav: použitý, maximálna hmotnosť nákladu: 32 875 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2018, Výbava: ABS, Nemecký náves od prvého majiteľa 1 zdvihateľná náprava, kombinovaná zadná klapka, plošina, obilný šmyk (výpust na obilie), oporné nohy, Viac informácií telefonicky Nsdpfowrx Rlex Agnswb Christian

Stav: použitý, maximálna hmotnosť nákladu: 32 180 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2014, ďalšia kontrola (TÜV): 11/2026, dĺžka ložného priestoru: 10 870 mm, šírka ložného priestoru: 2 220 mm, výška ložného priestoru: 2 320 mm, objem nakladacieho priestoru: 55 m³, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2014, Výbava: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- Chassis * Kempf SKM 39/3 AK – 4 units available Nsdexy D Rwjpfx Agnowb * Mercedes-Benz axles * Lift axle * Air suspension * Disc brakes * Tyres 1-3: 385/65 R22.5 * ALCOA aluminium rims * ABS * EBS * Rear underrun protection ----Body: * Aluminium tipping trough (Kippmulde) * Combination doors (swing and pendulum doors) * Vibrator!!!! * Cargo space dimensions: 10,870 mm x 2,220 mm x 2,320 mm * Sliding tarpaulin * Platform * 1 x grain discharge slide ----Technical data * Gross vehicle weight (GVW): 39,000 kg * Unladen weight: 6,820 kg * Payload: 32,180 kg ----#German vehicle*1st owner*Excellent condition# Financing/leasing/hire-purchase available on request ----Advertising/company logos on the vehicles may have been digitally removed from the pictures. ----Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To ensure the best possible service, please arrange an appointment in advance. ----Errors, mistakes, and prior sale reserved. All information without guarantee, in particular regarding equipment and accessories.

Stav: použitý, maximálna hmotnosť nákladu: 28 847 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2020, ďalšia kontrola (TÜV): 06/2026, Výbava: ABS, Schmitz 3-nápravový hliníkový obilný sklápací príves, typ: SKI 24 SL 9.6, cca 50m³, pozinkovaný, kotúčové brzdy, zdvihacia náprava, vzduchové odpruženie, nápravy Schmitz, obilný výsyp, kyvné zadné dvere, plošina, rolovacia plachta, EBS, ABS Nwodpfx Ajxb Incegnob Prvý majiteľ STK platná do 06/2026 – SP 12/25 K dispozícii 3 ks

Stav: použitý, číslo stroja/vozidla: GE12/122/2023, najazdené kilometre: 127 741 km, výkon: 163 kW (221,62 k), prvá registrácia: 05/2007, typ paliva: nafta, pohotovostná hmotnosť: 6 200 kg, maximálna hmotnosť nákladu: 5 790 kg, celková hmotnosť: 11 990 kg, konfigurácia náprav: 4x2, rázvor náprav: 4 700 mm, ďalšia kontrola (TÜV): 05/2024, brzdy: brzdenie motorom, farba: červená, typ prevodu: mechanický, emisná trieda: Euro 4, zavesenie: oceľ, dĺžka ložného priestoru: 6 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 800 mm, Výbava: ABS, hydraulika, kompresor, tempomat, uzávierka diferenciálu, žeriav, Veľmi dobre zachované vozidlo od 1. majiteľa 127 000 km Úplná servisná knižka Žeriav PALFINGER PK 6500 performance 1x hydraulický výsuv 2x hydraulické podpery 5. a 6. ovládací okruh pre polypový drapák Núdzové vypnutie Prídavný pohon Motorová brzda Samosvorný diferenciál zadnej nápravy Časticový filter – zelená ekologická plaketa ABS Posilňovač riadenia Tempomat Objem – 6690 cm³ 6-stupňová prevodovka Rázvor – 4700 mm Užitočné zaťaženie – 5790 kg Vzduchom odpružené ortopedické sedadlo vodiča Vyhrievanie sedadla El. ovládané okná El. nastaviteľné a vyhrievané vonkajšie spätné zrkadlá Nwedjp Nd Eqopfx Agnob Rádio – CD Príprava na Toll Collect Cena netto pre firmy/export – 37 990 € Zmeny, predaj a omyly vyhradené ===== Telefón2 Mobil =====

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2008, dĺžka ložného priestoru: 9 700 mm, šírka ložného priestoru: 2 350 mm, výška ložného priestoru: 2 165 mm, objem nakladacieho priestoru: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability through integrated tipping shaft with wear-resistant pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic tube, Nwedpfxsxf Spfe Agnsb Axles and suspension, disc brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% on silver steel rims, 11.75x22.5 ET 120 Landing gear Mechanical support legs, 2 x 20 t load capacity, for use with air suspension we use swinging feet, Braking system According to E.G. regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), ALU air tank, Electrical system According to StVZO regulations with 2 five-chamber lamps type Aspöck LED, 24 volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with side LED marker lights, 2 position lamps, 2 separate LED reversing lights, Tipping body / trough ALU body, sides with welded vertical aluminium profiles, floor approx. 6 mm in high-wear-resistant alloy (5383H34), Brinell HB 110, front wall inclined construction in 4 mm ALU with reinforcement profiles for tipper cylinder mount, side walls in 3 mm hard alloy, rear wall straight, automatic-pneumatic (lockable) universal door with swing flap and tailgate 2/3-1/3 design with double hinge suspension made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic system Hydraulic cylinder mounted on the front wall with operating pressure of 150 bar, manufacturer Edbro, with approx. 2m hydraulic hose and 1" loose half Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced underrun protection, folding version with 2 towing eyes, side impact guard 1x folding, catwalk at the front wall with access ladder on the left, 3 ALU stanchions in swivel version, 1x central additional stanchion holder, roll tarp with an aluminium tube in the centre, roll tarp system, roll tarp approx. 660gr./m2 quality, tarp fastener with quick release (without tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous mudflap on underrun guard mounted, etc. Offer and pictures subject to change.