Pracovná plošinová náves

FAYMONVILLE MAX Trailer MAX210 Telesattel

You can find our complete range of vehicles, including immediately and short-term available units, on our website.

Excerpt from the equipment. Full specification available on request.

Loading Platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading deck fitted with approx. 30 mm thick wooden floorboards
* 7 pairs of flip-out lashing rings (LC 5,000 daN)
* 3 pairs of flip-out lashing rings (LC 10,000 daN)
Hsdpfxew Tpr Ie Aqlofg
* Cutouts in the outer frame of the loading platform for hooking lashing straps (LC 2,000 daN)

Landing Legs:
* JOST landing legs (mechanical), two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Tyres:
* 385/65 R 22.5 tyres, brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via standardized EBS interface as per ISO 11992. The tractor unit must be capable of transmitting and displaying this data for correct display

Axle:
* BPW axles and suspension
* All axles forced hydraulic steering
* Disc brakes
* Technical axle load: 10,000 kg each (ET 0)
* Air suspension with lifting and lowering valve
* Axle tools

Brake System:
* WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel Structure:
* High-tensile fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Electrical System:
* Electrical system as per EU regulations
* 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting
* All LED side marker lamps flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Painting:
* Complete steel structure automatically blast-cleaned after welding using a turbine blast machine
* Second blasting with corundum for optimal coating adhesion
* Top coat: 2 layers of 2K paint, single color in RAL 3002 Carmine Red in accordance with RAL system 841GL
* Rims in silver gray
* Rear section metallized and painted in RAL 9010 (Pure White)
* Metallic paint not possible
* Paint build-up tested in salt spray test to ISO 9227-NSS
* Cavity sealing with special wax

Accessories:
* Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit)
* Electro-hydraulic power unit
* 4 wheel chocks with holder on the front bulkhead
* 2-inch king pin
* Galvanized connection rail at the front with yellow-red air couplings
* Mounts for warning boards left and right on neck and rear, including socket
* 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the loading platform
* One galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the platform for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; with additional locking position for a 45' container in the extension
* 4 crosswise stake pocket strips in the platform for approx. 100 x 50 mm plug-in stanchions
* Storage for up to 9 pairs of plug-in stanchions, bolted inside the front bulkhead
* Climbing ladders mounted left and right in the direction of travel
* One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted left-front under the loading platform
* Additional INOX toolbox, approx. 1,200 x 46...

Inzerát bol automaticky preložený. Chyby v preklade sú možné.